From: "周琰杰 (Zhou Yanjie)" <zhouyanjie@wanyeetech.com>
To: linux-clk@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
robh+dt@kernel.org, mturquette@baylibre.com, sboyd@kernel.org,
paul@crapouillou.net, dongsheng.qiu@ingenic.com,
yanfei.li@ingenic.com, sernia.zhou@foxmail.com,
zhenwenjin@gmail.com
Subject: [PATCH v8 3/6] dt-bindings: clock: Add X1830 bindings.
Date: Wed, 13 May 2020 21:16:41 +0800 [thread overview]
Message-ID: <1589375804-78423-5-git-send-email-zhouyanjie@wanyeetech.com> (raw)
In-Reply-To: <1589375804-78423-1-git-send-email-zhouyanjie@wanyeetech.com>
Add the clock bindings for the X1830 Soc from Ingenic.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Notes:
v1->v2:
Change my Signed-off-by from "Zhou Yanjie <zhouyanjie@zoho.com>"
to "周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>" because
the old mailbox is in an unstable state.
v2->v3:
Adjust order from [3/5] in v2 to [4/5] in v3.
v3->v4:
Adjust order from [4/5] in v3 to [3/4] in v4.
v4->v5:
Rebase on top of kernel 5.6-rc1.
v5->v6:
Add missing part of X1830's CGU.
v6->v7:
No change.
v7->v8:
Rebase on top of linux-next.
.../devicetree/bindings/clock/ingenic,cgu.yaml | 2 +
include/dt-bindings/clock/x1830-cgu.h | 53 ++++++++++++++++++++++
2 files changed, 55 insertions(+)
create mode 100644 include/dt-bindings/clock/x1830-cgu.h
diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
index 0281cd1..a952d58 100644
--- a/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
+++ b/Documentation/devicetree/bindings/clock/ingenic,cgu.yaml
@@ -25,6 +25,7 @@ select:
- ingenic,jz4770-cgu
- ingenic,jz4780-cgu
- ingenic,x1000-cgu
+ - ingenic,x1830-cgu
required:
- compatible
@@ -51,6 +52,7 @@ properties:
- ingenic,jz4770-cgu
- ingenic,jz4780-cgu
- ingenic,x1000-cgu
+ - ingenic,x1830-cgu
- const: simple-mfd
minItems: 1
diff --git a/include/dt-bindings/clock/x1830-cgu.h b/include/dt-bindings/clock/x1830-cgu.h
new file mode 100644
index 00000000..f605a7b
--- /dev/null
+++ b/include/dt-bindings/clock/x1830-cgu.h
@@ -0,0 +1,53 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * This header provides clock numbers for the ingenic,x1830-cgu DT binding.
+ *
+ * They are roughly ordered as:
+ * - external clocks
+ * - PLLs
+ * - muxes/dividers in the order they appear in the x1830 programmers manual
+ * - gates in order of their bit in the CLKGR* registers
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_X1830_CGU_H__
+#define __DT_BINDINGS_CLOCK_X1830_CGU_H__
+
+#define X1830_CLK_EXCLK 0
+#define X1830_CLK_RTCLK 1
+#define X1830_CLK_APLL 2
+#define X1830_CLK_MPLL 3
+#define X1830_CLK_EPLL 4
+#define X1830_CLK_VPLL 5
+#define X1830_CLK_SCLKA 6
+#define X1830_CLK_CPUMUX 7
+#define X1830_CLK_CPU 8
+#define X1830_CLK_L2CACHE 9
+#define X1830_CLK_AHB0 10
+#define X1830_CLK_AHB2PMUX 11
+#define X1830_CLK_AHB2 12
+#define X1830_CLK_PCLK 13
+#define X1830_CLK_DDR 14
+#define X1830_CLK_MAC 15
+#define X1830_CLK_LCD 16
+#define X1830_CLK_MSCMUX 17
+#define X1830_CLK_MSC0 18
+#define X1830_CLK_MSC1 19
+#define X1830_CLK_SSIPLL 20
+#define X1830_CLK_SSIPLL_DIV2 21
+#define X1830_CLK_SSIMUX 22
+#define X1830_CLK_EMC 23
+#define X1830_CLK_EFUSE 24
+#define X1830_CLK_OTG 25
+#define X1830_CLK_SSI0 26
+#define X1830_CLK_SMB0 27
+#define X1830_CLK_SMB1 28
+#define X1830_CLK_SMB2 29
+#define X1830_CLK_UART0 30
+#define X1830_CLK_UART1 31
+#define X1830_CLK_SSI1 32
+#define X1830_CLK_SFC 33
+#define X1830_CLK_PDMA 34
+#define X1830_CLK_DTRNG 35
+#define X1830_CLK_OST 36
+
+#endif /* __DT_BINDINGS_CLOCK_X1830_CGU_H__ */
--
2.7.4
next prev parent reply other threads:[~2020-05-13 13:17 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-13 13:16 Add support for the X1830 and fix bugs for X1000 v8 周琰杰 (Zhou Yanjie)
2020-05-13 13:16 ` [PATCH v8 0/6] Add support for the X1830 and fix bugs for X1000 周琰杰 (Zhou Yanjie)
2020-05-13 13:16 ` [PATCH v8 1/6] clk: Ingenic: Remove unnecessary spinlock when reading registers 周琰杰 (Zhou Yanjie)
2020-05-13 13:16 ` [PATCH v8 2/6] clk: Ingenic: Adjust cgu code to make it compatible with X1830 周琰杰 (Zhou Yanjie)
2020-05-13 13:16 ` 周琰杰 (Zhou Yanjie) [this message]
2020-05-13 13:16 ` [PATCH v8 4/6] clk: Ingenic: Add CGU driver for X1830 周琰杰 (Zhou Yanjie)
2020-05-13 13:16 ` [PATCH v8 5/6] dt-bindings: clock: Add and reorder ABI for X1000 周琰杰 (Zhou Yanjie)
2020-05-13 13:16 ` [PATCH v8 6/6] clk: X1000: Add FIXDIV for SSI clock of X1000 周琰杰 (Zhou Yanjie)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1589375804-78423-5-git-send-email-zhouyanjie@wanyeetech.com \
--to=zhouyanjie@wanyeetech.com \
--cc=devicetree@vger.kernel.org \
--cc=dongsheng.qiu@ingenic.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=paul@crapouillou.net \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=sernia.zhou@foxmail.com \
--cc=yanfei.li@ingenic.com \
--cc=zhenwenjin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).