linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Nagarjuna Kristam <nkristam@nvidia.com>
To: <balbi@kernel.org>, <gregkh@linuxfoundation.org>,
	<thierry.reding@gmail.com>, <jonathanh@nvidia.com>,
	<mark.rutland@arm.com>, <robh+dt@kernel.org>, <kishon@ti.com>
Cc: <devicetree@vger.kernel.org>, <linux-tegra@vger.kernel.org>,
	<linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Nagarjuna Kristam <nkristam@nvidia.com>
Subject: [PATCH V3 4/8] phy: tegra: xusb: Add USB2 pad power control support for Tegra210
Date: Thu, 14 May 2020 11:52:39 +0530	[thread overview]
Message-ID: <1589437363-16727-5-git-send-email-nkristam@nvidia.com> (raw)
In-Reply-To: <1589437363-16727-1-git-send-email-nkristam@nvidia.com>

Add USB2 pad power on and off API's for TEgra210 and provide its control
via soc ops. It can be used by operations like charger detect to power on
and off USB2 pad if needed.

Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
---
V3:
 - Added Acked-by updates to commit message.
---
V2:
 - Patch re-based.
---
 drivers/phy/tegra/xusb-tegra210.c | 190 ++++++++++++++++++++++++++------------
 1 file changed, 133 insertions(+), 57 deletions(-)

diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index 66bd461..caf0890 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -994,6 +994,128 @@ static int tegra210_xusb_padctl_id_override(struct tegra_xusb_padctl *padctl,
 	return 0;
 }
 
+static void tegra210_usb2_bias_pad_power_on(struct tegra_xusb_usb2_pad *pad)
+{
+	struct tegra_xusb_padctl *padctl = pad->base.padctl;
+	u32 value;
+
+	if (pad->enable++ > 0)
+		return;
+
+	dev_dbg(padctl->dev, "power on BIAS PAD & USB2 tracking\n");
+
+	if (clk_prepare_enable(pad->clk))
+		dev_warn(padctl->dev, "failed to enable BIAS PAD & USB2 tracking\n");
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
+	value &= ~((XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_MASK <<
+		    XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_SHIFT) |
+		   (XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_MASK <<
+		    XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_SHIFT));
+	value |= (XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_VAL <<
+		  XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_SHIFT) |
+		 (XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_VAL <<
+		  XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_SHIFT);
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
+	value &= ~XUSB_PADCTL_USB2_BIAS_PAD_CTL0_PD;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
+
+	udelay(1);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
+	value &= ~XUSB_PADCTL_USB2_BIAS_PAD_CTL1_PD_TRK;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
+
+	udelay(50);
+}
+
+static void tegra210_usb2_bias_pad_power_off(struct tegra_xusb_usb2_pad *pad)
+{
+	struct tegra_xusb_padctl *padctl = pad->base.padctl;
+	u32 value;
+
+	if (WARN_ON(pad->enable == 0))
+		return;
+
+	if (--pad->enable > 0)
+		return;
+
+	dev_dbg(padctl->dev, "power off USB2 tracking\n");
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
+	value |= XUSB_PADCTL_USB2_BIAS_PAD_CTL0_PD;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
+
+	clk_disable_unprepare(pad->clk);
+}
+
+/* must be called under padctl->lock */
+void tegra210_usb2_pad_power_on(struct phy *phy)
+{
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
+	struct tegra_xusb_usb2_pad *pad = to_usb2_pad(lane->pad);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	unsigned int index = lane->index;
+	u32 value;
+
+	if (!phy)
+		return;
+
+	if (usb2->powered_on)
+		return;
+
+	dev_info(padctl->dev, "power on UTMI pads %d\n", index);
+
+	tegra210_usb2_bias_pad_power_on(pad);
+
+	udelay(2);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+	value &= ~XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
+	value &= ~XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_DR;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
+
+	usb2->powered_on = true;
+}
+
+/* must be called under padctl->lock */
+void tegra210_usb2_pad_power_down(struct phy *phy)
+{
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
+	struct tegra_xusb_usb2_pad *pad = to_usb2_pad(lane->pad);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	unsigned int index = lane->index;
+	u32 value;
+
+	if (!phy)
+		return;
+
+	if (!usb2->powered_on)
+		return;
+
+	dev_info(padctl->dev, "power down UTMI pad %d\n", index);
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+	value |= XUSB_PADCTL_USB2_OTG_PAD_CTL0_PD;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
+
+	value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
+	value |= XUSB_PADCTL_USB2_OTG_PAD_CTL1_PD_DR;
+	padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
+
+	udelay(2);
+
+	tegra210_usb2_bias_pad_power_off(pad);
+	usb2->powered_on = false;
+}
+
 static int tegra210_usb2_phy_set_mode(struct phy *phy, enum phy_mode mode,
 				      int submode)
 {
@@ -1037,7 +1159,6 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 {
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
 	struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
-	struct tegra_xusb_usb2_pad *pad = to_usb2_pad(lane->pad);
 	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
 	struct tegra210_xusb_padctl *priv;
 	struct tegra_xusb_usb2_port *port;
@@ -1053,6 +1174,8 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 
 	priv = to_tegra210_xusb_padctl(padctl);
 
+	mutex_lock(&padctl->lock);
+
 	if (port->usb3_port_fake != -1) {
 		value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP);
 		value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK(
@@ -1148,62 +1271,21 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 
 	if (port->supply && port->mode == USB_DR_MODE_HOST) {
 		err = regulator_enable(port->supply);
-		if (err)
+		if (err) {
+			mutex_unlock(&padctl->lock);
 			return err;
+		}
 	}
 
-	mutex_lock(&padctl->lock);
-
-	if (pad->enable > 0) {
-		pad->enable++;
-		mutex_unlock(&padctl->lock);
-		return 0;
-	}
-
-	err = clk_prepare_enable(pad->clk);
-	if (err)
-		goto disable_regulator;
+	tegra210_usb2_pad_power_on(phy);
 
-	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
-	value &= ~((XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_MASK <<
-		    XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_SHIFT) |
-		   (XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_MASK <<
-		    XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_SHIFT));
-	value |= (XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_VAL <<
-		  XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_SHIFT) |
-		 (XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_VAL <<
-		  XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_DONE_RESET_TIMER_SHIFT);
-	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
-
-	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
-	value &= ~XUSB_PADCTL_USB2_BIAS_PAD_CTL0_PD;
-	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
-
-	udelay(1);
-
-	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
-	value &= ~XUSB_PADCTL_USB2_BIAS_PAD_CTL1_PD_TRK;
-	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
-
-	udelay(50);
-
-	clk_disable_unprepare(pad->clk);
-
-	pad->enable++;
 	mutex_unlock(&padctl->lock);
-
 	return 0;
-
-disable_regulator:
-	regulator_disable(port->supply);
-	mutex_unlock(&padctl->lock);
-	return err;
 }
 
 static int tegra210_usb2_phy_power_off(struct phy *phy)
 {
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
-	struct tegra_xusb_usb2_pad *pad = to_usb2_pad(lane->pad);
 	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
 	struct tegra_xusb_usb2_port *port;
 	u32 value;
@@ -1217,6 +1299,8 @@ static int tegra210_usb2_phy_power_off(struct phy *phy)
 
 	mutex_lock(&padctl->lock);
 
+	tegra210_usb2_pad_power_down(phy);
+
 	if (port->usb3_port_fake != -1) {
 		value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM1);
 		value |= XUSB_PADCTL_ELPG_PROGRAM1_SSPX_ELPG_CLAMP_EN_EARLY(
@@ -1243,18 +1327,8 @@ static int tegra210_usb2_phy_power_off(struct phy *phy)
 		padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_MAP);
 	}
 
-	if (WARN_ON(pad->enable == 0))
-		goto out;
-
-	if (--pad->enable > 0)
-		goto out;
-
-	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
-	value |= XUSB_PADCTL_USB2_BIAS_PAD_CTL0_PD;
-	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
-
-out:
 	regulator_disable(port->supply);
+
 	mutex_unlock(&padctl->lock);
 	return 0;
 }
@@ -2215,6 +2289,8 @@ static const struct tegra_xusb_padctl_ops tegra210_xusb_padctl_ops = {
 	.hsic_set_idle = tegra210_hsic_set_idle,
 	.vbus_override = tegra210_xusb_padctl_vbus_override,
 	.utmi_port_reset = tegra210_utmi_port_reset,
+	.utmi_pad_power_on = tegra210_usb2_pad_power_on,
+	.utmi_pad_power_down = tegra210_usb2_pad_power_down,
 };
 
 static const char * const tegra210_xusb_padctl_supply_names[] = {
-- 
2.7.4


  parent reply	other threads:[~2020-05-14  6:23 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-14  6:22 [PATCH V3 0/8] Tegra XUSB charger detect support Nagarjuna Kristam
2020-05-14  6:22 ` [PATCH V3 1/8] dt-bindings: phy: tegra-xusb: Add charger-detect property Nagarjuna Kristam
2020-05-14  6:22 ` [PATCH V3 2/8] usb: gadget: tegra-xudc: Add vbus_draw support Nagarjuna Kristam
2020-06-04 13:54   ` Thierry Reding
2020-05-14  6:22 ` [PATCH V3 3/8] phy: tegra: xusb: Add support for UTMI pad power control Nagarjuna Kristam
2020-05-14  6:22 ` Nagarjuna Kristam [this message]
2020-05-14  6:22 ` [PATCH V3 5/8] phy: tegra: xusb: Add soc ops API to enable UTMI PAD protection Nagarjuna Kristam
2020-05-18 12:24   ` Kishon Vijay Abraham I
2020-06-04 13:58     ` Thierry Reding
2020-06-04 13:55   ` Thierry Reding
2020-05-14  6:22 ` [PATCH V3 6/8] phy: tegra: xusb: Add support for charger detect Nagarjuna Kristam
2020-05-14  7:02   ` Chunfeng Yun
2020-06-04 13:56   ` Thierry Reding
2020-05-14  6:22 ` [PATCH V3 7/8] phy: tegra: xusb: Enable charger detect for Tegra186 Nagarjuna Kristam
2020-05-14  6:22 ` [PATCH V3 8/8] phy: tegra: xusb: Enable charger detect for Tegra210 Nagarjuna Kristam
2020-05-14  9:39 ` [PATCH V3 0/8] Tegra XUSB charger detect support Felipe Balbi
2020-05-14  9:46   ` Nagarjuna Kristam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1589437363-16727-5-git-send-email-nkristam@nvidia.com \
    --to=nkristam@nvidia.com \
    --cc=balbi@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jonathanh@nvidia.com \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    --subject='Re: [PATCH V3 4/8] phy: tegra: xusb: Add USB2 pad power control support for Tegra210' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).