[PATCH V2 0/3] Covert i.MX GPT/TPM/SYSCTR timer binding to json-schema

[PATCH V2 0/3] Covert i.MX GPT/TPM/SYSCTR timer binding to json-schema

[Anson Huang]

This patch series converts i.MX GPT, TPM and system counter timer
binding to json-schema, test build passed.

Changes compared to V1 are listed in each patch.

Anson Huang (3):
  dt-bindings: timer: Convert i.MX GPT to json-schema
  dt-bindings: timer: Convert i.MX TPM to json-schema
  dt-bindings: timer: Convert i.MX SYSCTR to json-schema

 .../devicetree/bindings/timer/fsl,imxgpt.txt       | 45 ------------
 .../devicetree/bindings/timer/fsl,imxgpt.yaml      | 80 ++++++++++++++++++++++
 .../devicetree/bindings/timer/nxp,sysctr-timer.txt | 25 -------
 .../bindings/timer/nxp,sysctr-timer.yaml           | 54 +++++++++++++++
 .../devicetree/bindings/timer/nxp,tpm-timer.txt    | 28 --------
 .../devicetree/bindings/timer/nxp,tpm-timer.yaml   | 61 +++++++++++++++++
 6 files changed, 195 insertions(+), 98 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
 create mode 100644 Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
 delete mode 100644 Documentation/devicetree/bindings/timer/nxp,sysctr-timer.txt
 create mode 100644 Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml
 delete mode 100644 Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
 create mode 100644 Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml

-- 
2.7.4

[PATCH V2 1/3] dt-bindings: timer: Convert i.MX GPT to json-schema

[Anson Huang]

Convert the i.MX GPT binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
Changes since V1:
	- remove unnecessary compatible item descriptions;
	- remove unnecessary maxItems for clocks/clock-names;
---
 .../devicetree/bindings/timer/fsl,imxgpt.txt       | 45 ------------
 .../devicetree/bindings/timer/fsl,imxgpt.yaml      | 80 ++++++++++++++++++++++
 2 files changed, 80 insertions(+), 45 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
 create mode 100644 Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml

diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt b/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
deleted file mode 100644
index 5d8fd5b..0000000
--- a/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-Freescale i.MX General Purpose Timer (GPT)
-
-Required properties:
-
-- compatible : should be one of following:
-  for i.MX1:
-  - "fsl,imx1-gpt";
-  for i.MX21:
-  - "fsl,imx21-gpt";
-  for i.MX27:
-  - "fsl,imx27-gpt", "fsl,imx21-gpt";
-  for i.MX31:
-  - "fsl,imx31-gpt";
-  for i.MX25:
-  - "fsl,imx25-gpt", "fsl,imx31-gpt";
-  for i.MX50:
-  - "fsl,imx50-gpt", "fsl,imx31-gpt";
-  for i.MX51:
-  - "fsl,imx51-gpt", "fsl,imx31-gpt";
-  for i.MX53:
-  - "fsl,imx53-gpt", "fsl,imx31-gpt";
-  for i.MX6Q:
-  - "fsl,imx6q-gpt", "fsl,imx31-gpt";
-  for i.MX6DL:
-  - "fsl,imx6dl-gpt";
-  for i.MX6SL:
-  - "fsl,imx6sl-gpt", "fsl,imx6dl-gpt";
-  for i.MX6SX:
-  - "fsl,imx6sx-gpt", "fsl,imx6dl-gpt";
-- reg : specifies base physical address and size of the registers.
-- interrupts : should be the gpt interrupt.
-- clocks : the clocks provided by the SoC to drive the timer, must contain
-           an entry for each entry in clock-names.
-- clock-names : must include "ipg" entry first, then "per" entry.
-
-Example:
-
-gpt1: timer@10003000 {
-	compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
-	reg = <0x10003000 0x1000>;
-	interrupts = <26>;
-	clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
-		 <&clks IMX27_CLK_PER1_GATE>;
-	clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
new file mode 100644
index 0000000..5479290
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/fsl,imxgpt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX General Purpose Timer (GPT)
+
+maintainers:
+  - Sascha Hauer <s.hauer@pengutronix.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: "fsl,imx1-gpt"
+      - const: "fsl,imx21-gpt"
+      - items:
+          - const: "fsl,imx27-gpt"
+          - const: "fsl,imx21-gpt"
+      - const: "fsl,imx31-gpt"
+      - items:
+          - const: "fsl,imx25-gpt"
+          - const: "fsl,imx31-gpt"
+      - items:
+          - const: "fsl,imx50-gpt"
+          - const: "fsl,imx31-gpt"
+      - items:
+          - const: "fsl,imx51-gpt"
+          - const: "fsl,imx31-gpt"
+      - items:
+          - const: "fsl,imx53-gpt"
+          - const: "fsl,imx31-gpt"
+      - items:
+          - const: "fsl,imx6q-gpt"
+          - const: "fsl,imx31-gpt"
+      - const: "fsl,imx6dl-gpt"
+      - items:
+          - const: "fsl,imx6sl-gpt"
+          - const: "fsl,imx6dl-gpt"
+      - items:
+          - const: "fsl,imx6sx-gpt"
+          - const: "fsl,imx6dl-gpt"
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SoC GPT ipg clock
+      - description: SoC GPT per clock
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx27-clock.h>
+
+    timer@10003000 {
+        compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
+        reg = <0x10003000 0x1000>;
+        interrupts = <26>;
+        clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
+                 <&clks IMX27_CLK_PER1_GATE>;
+        clock-names = "ipg", "per";
+    };
-- 
2.7.4

[PATCH V2 2/3] dt-bindings: timer: Convert i.MX TPM to json-schema

[Anson Huang]

Convert the i.MX TPM binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
---
Changes since V1:
	- remove unnecessary maxItems for clocks/clock-names.
---
 .../devicetree/bindings/timer/nxp,tpm-timer.txt    | 28 ----------
 .../devicetree/bindings/timer/nxp,tpm-timer.yaml   | 61 ++++++++++++++++++++++
 2 files changed, 61 insertions(+), 28 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
 create mode 100644 Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml

diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
deleted file mode 100644
index f82087b..0000000
--- a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-NXP Low Power Timer/Pulse Width Modulation Module (TPM)
-
-The Timer/PWM Module (TPM) supports input capture, output compare,
-and the generation of PWM signals to control electric motor and power
-management applications. The counter, compare and capture registers
-are clocked by an asynchronous clock that can remain enabled in low
-power modes. TPM can support global counter bus where one TPM drives
-the counter bus for the others, provided bit width is the same.
-
-Required properties:
-
-- compatible :	should be "fsl,imx7ulp-tpm"
-- reg :		Specifies base physical address and size of the register sets
-		for the clock event device and clock source device.
-- interrupts :	Should be the clock event device interrupt.
-- clocks :	The clocks provided by the SoC to drive the timer, must contain
-		an entry for each entry in clock-names.
-- clock-names : Must include the following entries: "ipg" and "per".
-
-Example:
-tpm5: tpm@40260000 {
-	compatible = "fsl,imx7ulp-tpm";
-	reg = <0x40260000 0x1000>;
-	interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&clks IMX7ULP_CLK_NIC1_BUS_DIV>,
-		 <&clks IMX7ULP_CLK_LPTPM5>;
-	clock-names = "ipg", "per";
-};
diff --git a/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml
new file mode 100644
index 0000000..edd9585
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/nxp,tpm-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP Low Power Timer/Pulse Width Modulation Module (TPM)
+
+maintainers:
+  - Dong Aisheng <aisheng.dong@nxp.com>
+
+description: |
+  The Timer/PWM Module (TPM) supports input capture, output compare,
+  and the generation of PWM signals to control electric motor and power
+  management applications. The counter, compare and capture registers
+  are clocked by an asynchronous clock that can remain enabled in low
+  power modes. TPM can support global counter bus where one TPM drives
+  the counter bus for the others, provided bit width is the same.
+
+properties:
+  compatible:
+    const: fsl,imx7ulp-tpm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: SoC TPM ipg clock
+      - description: SoC TPM per clock
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: per
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7ulp-clock.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    timer@40260000 {
+        compatible = "fsl,imx7ulp-tpm";
+        reg = <0x40260000 0x1000>;
+        interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&scg1 IMX7ULP_CLK_NIC1_BUS_DIV>,
+                 <&pcc2 IMX7ULP_CLK_LPTPM5>;
+        clock-names = "ipg", "per";
+    };
-- 
2.7.4

[PATCH V2 3/3] dt-bindings: timer: Convert i.MX SYSCTR to json-schema

[Anson Huang]

Convert the i.MX SYSCTR binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
---
No changes.
---
 .../devicetree/bindings/timer/nxp,sysctr-timer.txt | 25 ----------
 .../bindings/timer/nxp,sysctr-timer.yaml           | 54 ++++++++++++++++++++++
 2 files changed, 54 insertions(+), 25 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/timer/nxp,sysctr-timer.txt
 create mode 100644 Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml

diff --git a/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.txt b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.txt
deleted file mode 100644
index d576599..0000000
--- a/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-NXP System Counter Module(sys_ctr)
-
-The system counter(sys_ctr) is a programmable system counter which provides
-a shared time base to Cortex A15, A7, A53, A73, etc. it is intended for use in
-applications where the counter is always powered and support multiple,
-unrelated clocks. The compare frame inside can be used for timer purpose.
-
-Required properties:
-
-- compatible :      should be "nxp,sysctr-timer"
-- reg :             Specifies the base physical address and size of the comapre
-                    frame and the counter control, read & compare.
-- interrupts :      should be the first compare frames' interrupt
-- clocks : 	    Specifies the counter clock.
-- clock-names: 	    Specifies the clock's name of this module
-
-Example:
-
-	system_counter: timer@306a0000 {
-		compatible = "nxp,sysctr-timer";
-		reg = <0x306a0000 0x20000>;/* system-counter-rd & compare */
-		clocks = <&clk_8m>;
-		clock-names = "per";
-		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml
new file mode 100644
index 0000000..830211c
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/nxp,sysctr-timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP System Counter Module(sys_ctr)
+
+maintainers:
+  - Bai Ping <ping.bai@nxp.com>
+
+description: |
+  The system counter(sys_ctr) is a programmable system counter
+  which provides a shared time base to Cortex A15, A7, A53, A73,
+  etc. it is intended for use in applications where the counter
+  is always powered and support multiple, unrelated clocks. The
+  compare frame inside can be used for timer purpose.
+
+properties:
+  compatible:
+    const: nxp,sysctr-timer
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: per
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    timer@306a0000 {
+        compatible = "nxp,sysctr-timer";
+        reg = <0x306a0000 0x20000>;
+        clocks = <&clk_8m>;
+        clock-names = "per";
+        interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+     };
-- 
2.7.4

RE: [PATCH V2 1/3] dt-bindings: timer: Convert i.MX GPT to json-schema

[Aisheng Dong]

> From: Anson Huang <Anson.Huang@nxp.com>
> Sent: Tuesday, May 19, 2020 11:56 AM
> 
> Convert the i.MX GPT binding to DT schema format using json-schema.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>

Regards
Aisheng

Re: [PATCH V2 1/3] dt-bindings: timer: Convert i.MX GPT to json-schema

[Rob Herring]

On Tue, May 19, 2020 at 11:55:45AM +0800, Anson Huang wrote:
> Convert the i.MX GPT binding to DT schema format using json-schema.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> Changes since V1:
> 	- remove unnecessary compatible item descriptions;
> 	- remove unnecessary maxItems for clocks/clock-names;
> ---
>  .../devicetree/bindings/timer/fsl,imxgpt.txt       | 45 ------------
>  .../devicetree/bindings/timer/fsl,imxgpt.yaml      | 80 ++++++++++++++++++++++
>  2 files changed, 80 insertions(+), 45 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
>  create mode 100644 Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
> 
> diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt b/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
> deleted file mode 100644
> index 5d8fd5b..0000000
> --- a/Documentation/devicetree/bindings/timer/fsl,imxgpt.txt
> +++ /dev/null
> @@ -1,45 +0,0 @@
> -Freescale i.MX General Purpose Timer (GPT)
> -
> -Required properties:
> -
> -- compatible : should be one of following:
> -  for i.MX1:
> -  - "fsl,imx1-gpt";
> -  for i.MX21:
> -  - "fsl,imx21-gpt";
> -  for i.MX27:
> -  - "fsl,imx27-gpt", "fsl,imx21-gpt";
> -  for i.MX31:
> -  - "fsl,imx31-gpt";
> -  for i.MX25:
> -  - "fsl,imx25-gpt", "fsl,imx31-gpt";
> -  for i.MX50:
> -  - "fsl,imx50-gpt", "fsl,imx31-gpt";
> -  for i.MX51:
> -  - "fsl,imx51-gpt", "fsl,imx31-gpt";
> -  for i.MX53:
> -  - "fsl,imx53-gpt", "fsl,imx31-gpt";
> -  for i.MX6Q:
> -  - "fsl,imx6q-gpt", "fsl,imx31-gpt";
> -  for i.MX6DL:
> -  - "fsl,imx6dl-gpt";
> -  for i.MX6SL:
> -  - "fsl,imx6sl-gpt", "fsl,imx6dl-gpt";
> -  for i.MX6SX:
> -  - "fsl,imx6sx-gpt", "fsl,imx6dl-gpt";
> -- reg : specifies base physical address and size of the registers.
> -- interrupts : should be the gpt interrupt.
> -- clocks : the clocks provided by the SoC to drive the timer, must contain
> -           an entry for each entry in clock-names.
> -- clock-names : must include "ipg" entry first, then "per" entry.
> -
> -Example:
> -
> -gpt1: timer@10003000 {
> -	compatible = "fsl,imx27-gpt", "fsl,imx21-gpt";
> -	reg = <0x10003000 0x1000>;
> -	interrupts = <26>;
> -	clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>,
> -		 <&clks IMX27_CLK_PER1_GATE>;
> -	clock-names = "ipg", "per";
> -};
> diff --git a/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
> new file mode 100644
> index 0000000..5479290
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
> @@ -0,0 +1,80 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/timer/fsl,imxgpt.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale i.MX General Purpose Timer (GPT)
> +
> +maintainers:
> +  - Sascha Hauer <s.hauer@pengutronix.de>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - const: "fsl,imx1-gpt"
> +      - const: "fsl,imx21-gpt"
> +      - items:
> +          - const: "fsl,imx27-gpt"
> +          - const: "fsl,imx21-gpt"
> +      - const: "fsl,imx31-gpt"
> +      - items:
> +          - const: "fsl,imx25-gpt"
> +          - const: "fsl,imx31-gpt"
> +      - items:
> +          - const: "fsl,imx50-gpt"
> +          - const: "fsl,imx31-gpt"
> +      - items:
> +          - const: "fsl,imx51-gpt"
> +          - const: "fsl,imx31-gpt"
> +      - items:
> +          - const: "fsl,imx53-gpt"
> +          - const: "fsl,imx31-gpt"
> +      - items:
> +          - const: "fsl,imx6q-gpt"
> +          - const: "fsl,imx31-gpt"
> +      - const: "fsl,imx6dl-gpt"
> +      - items:
> +          - const: "fsl,imx6sl-gpt"
> +          - const: "fsl,imx6dl-gpt"
> +      - items:
> +          - const: "fsl,imx6sx-gpt"
> +          - const: "fsl,imx6dl-gpt"

Don't need quotes.

Group all the ones with the same fallback to a single 'items' list 
using enum for the first entry.

Rob

Re: [PATCH V2 2/3] dt-bindings: timer: Convert i.MX TPM to json-schema

[Rob Herring]

On Tue, 19 May 2020 11:55:46 +0800, Anson Huang wrote:
> Convert the i.MX TPM binding to DT schema format using json-schema.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
> ---
> Changes since V1:
> 	- remove unnecessary maxItems for clocks/clock-names.
> ---
>  .../devicetree/bindings/timer/nxp,tpm-timer.txt    | 28 ----------
>  .../devicetree/bindings/timer/nxp,tpm-timer.yaml   | 61 ++++++++++++++++++++++
>  2 files changed, 61 insertions(+), 28 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/timer/nxp,tpm-timer.txt
>  create mode 100644 Documentation/devicetree/bindings/timer/nxp,tpm-timer.yaml
> 

Applied, thanks!

Re: [PATCH V2 3/3] dt-bindings: timer: Convert i.MX SYSCTR to json-schema

[Rob Herring]

On Tue, 19 May 2020 11:55:47 +0800, Anson Huang wrote:
> Convert the i.MX SYSCTR binding to DT schema format using json-schema.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
> ---
> No changes.
> ---
>  .../devicetree/bindings/timer/nxp,sysctr-timer.txt | 25 ----------
>  .../bindings/timer/nxp,sysctr-timer.yaml           | 54 ++++++++++++++++++++++
>  2 files changed, 54 insertions(+), 25 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/timer/nxp,sysctr-timer.txt
>  create mode 100644 Documentation/devicetree/bindings/timer/nxp,sysctr-timer.yaml
> 

Applied, thanks!