From: Weiyi Lu <weiyi.lu@mediatek.com>
To: Enric Balletbo Serra <eballetbo@gmail.com>,
Matthias Brugger <matthias.bgg@gmail.com>,
Nicolas Boichat <drinkcat@chromium.org>,
Rob Herring <robh@kernel.org>,
Sascha Hauer <kernel@pengutronix.de>
Cc: James Liao <jamesjj.liao@mediatek.com>,
Fan Chen <fan.chen@mediatek.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>,
<srv_heupstream@mediatek.com>, Weiyi Lu <weiyi.lu@mediatek.com>
Subject: [PATCH v15 10/11] arm64: dts: Add power controller device node of MT8183
Date: Thu, 21 May 2020 17:06:23 +0800 [thread overview]
Message-ID: <1590051985-29149-11-git-send-email-weiyi.lu@mediatek.com> (raw)
In-Reply-To: <1590051985-29149-1-git-send-email-weiyi.lu@mediatek.com>
Add power controller node and smi-common node for MT8183
In scpsys node, it contains clocks and regmapping of
infracfg and smi-common for bus protection.
Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 62 ++++++++++++++++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 97863ad..ff7fe0c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -8,6 +8,7 @@
#include <dt-bindings/clock/mt8183-clk.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/mt8183-power.h>
#include <dt-bindings/reset-controller/mt8183-resets.h>
#include "mt8183-pinfunc.h"
@@ -301,6 +302,62 @@
#interrupt-cells = <2>;
};
+ scpsys: power-controller@10006000 {
+ compatible = "mediatek,mt8183-scpsys", "syscon";
+ #power-domain-cells = <1>;
+ reg = <0 0x10006000 0 0x1000>;
+ clocks = <&topckgen CLK_TOP_MUX_AUD_INTBUS>,
+ <&infracfg CLK_INFRA_AUDIO>,
+ <&infracfg CLK_INFRA_AUDIO_26M_BCLK>,
+ <&topckgen CLK_TOP_MUX_MFG>,
+ <&topckgen CLK_TOP_MUX_MM>,
+ <&topckgen CLK_TOP_MUX_CAM>,
+ <&topckgen CLK_TOP_MUX_IMG>,
+ <&topckgen CLK_TOP_MUX_IPU_IF>,
+ <&topckgen CLK_TOP_MUX_DSP>,
+ <&topckgen CLK_TOP_MUX_DSP1>,
+ <&topckgen CLK_TOP_MUX_DSP2>,
+ <&mmsys CLK_MM_SMI_COMMON>,
+ <&mmsys CLK_MM_SMI_LARB0>,
+ <&mmsys CLK_MM_SMI_LARB1>,
+ <&mmsys CLK_MM_GALS_COMM0>,
+ <&mmsys CLK_MM_GALS_COMM1>,
+ <&mmsys CLK_MM_GALS_CCU2MM>,
+ <&mmsys CLK_MM_GALS_IPU12MM>,
+ <&mmsys CLK_MM_GALS_IMG2MM>,
+ <&mmsys CLK_MM_GALS_CAM2MM>,
+ <&mmsys CLK_MM_GALS_IPU2MM>,
+ <&imgsys CLK_IMG_LARB5>,
+ <&imgsys CLK_IMG_LARB2>,
+ <&camsys CLK_CAM_LARB6>,
+ <&camsys CLK_CAM_LARB3>,
+ <&camsys CLK_CAM_SENINF>,
+ <&camsys CLK_CAM_CAMSV0>,
+ <&camsys CLK_CAM_CAMSV1>,
+ <&camsys CLK_CAM_CAMSV2>,
+ <&camsys CLK_CAM_CCU>,
+ <&ipu_conn CLK_IPU_CONN_IPU>,
+ <&ipu_conn CLK_IPU_CONN_AHB>,
+ <&ipu_conn CLK_IPU_CONN_AXI>,
+ <&ipu_conn CLK_IPU_CONN_ISP>,
+ <&ipu_conn CLK_IPU_CONN_CAM_ADL>,
+ <&ipu_conn CLK_IPU_CONN_IMG_ADL>;
+ clock-names = "audio", "audio1", "audio2",
+ "mfg", "mm", "cam",
+ "isp", "vpu", "vpu1",
+ "vpu2", "vpu3", "mm-0",
+ "mm-1", "mm-2", "mm-3",
+ "mm-4", "mm-5", "mm-6",
+ "mm-7", "mm-8", "mm-9",
+ "isp-0", "isp-1", "cam-0",
+ "cam-1", "cam-2", "cam-3",
+ "cam-4", "cam-5", "cam-6",
+ "vpu-0", "vpu-1", "vpu-2",
+ "vpu-3", "vpu-4", "vpu-5";
+ infracfg = <&infracfg>;
+ mediatek,smi = <&smi_common>;
+ };
+
watchdog: watchdog@10007000 {
compatible = "mediatek,mt8183-wdt",
"mediatek,mt6589-wdt";
@@ -658,6 +715,11 @@
#clock-cells = <1>;
};
+ smi_common: smi@14019000 {
+ compatible = "mediatek,mt8183-smi-common", "syscon";
+ reg = <0 0x14019000 0 0x1000>;
+ };
+
imgsys: syscon@15020000 {
compatible = "mediatek,mt8183-imgsys", "syscon";
reg = <0 0x15020000 0 0x1000>;
--
1.8.1.1.dirty
next prev parent reply other threads:[~2020-05-21 9:06 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-21 9:06 [PATCH v15 00/11] Mediatek MT8183 scpsys support Weiyi Lu
2020-05-21 9:06 ` [PATCH v15 01/11] dt-bindings: mediatek: Add property to mt8183 smi-common Weiyi Lu
2020-05-26 18:02 ` Rob Herring
2020-05-21 9:06 ` [PATCH v15 02/11] dt-bindings: soc: Add MT8183 power dt-bindings Weiyi Lu
2020-05-26 18:03 ` Rob Herring
2020-05-21 9:06 ` [PATCH v15 03/11] soc: mediatek: Add basic_clk_name to scp_power_data Weiyi Lu
2020-05-21 9:06 ` [PATCH v15 04/11] soc: mediatek: Remove infracfg misc driver support Weiyi Lu
2020-05-21 9:06 ` [PATCH v15 05/11] soc: mediatek: Add multiple step bus protection control Weiyi Lu
2020-05-21 9:06 ` [PATCH v15 06/11] soc: mediatek: Add subsys clock control for bus protection Weiyi Lu
2020-06-04 2:29 ` Nicolas Boichat
2020-06-17 6:39 ` Weiyi Lu
2020-05-21 9:06 ` [PATCH v15 07/11] soc: mediatek: Add extra sram control Weiyi Lu
2020-05-21 9:06 ` [PATCH v15 08/11] soc: mediatek: Add MT8183 scpsys support Weiyi Lu
2020-05-21 9:06 ` [PATCH v15 09/11] soc: mediatek: Add a comma at the end Weiyi Lu
2020-05-21 9:06 ` Weiyi Lu [this message]
2020-05-21 9:06 ` [PATCH v15 11/11] arm64: dts: Add power-domains property to mfgcfg Weiyi Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1590051985-29149-11-git-send-email-weiyi.lu@mediatek.com \
--to=weiyi.lu@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=drinkcat@chromium.org \
--cc=eballetbo@gmail.com \
--cc=fan.chen@mediatek.com \
--cc=jamesjj.liao@mediatek.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh@kernel.org \
--cc=srv_heupstream@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).