linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Shengjiu Wang <shengjiu.wang@nxp.com>
To: timur@kernel.org, nicoleotsuka@gmail.com, Xiubo.Lee@gmail.com,
	festevam@gmail.com, broonie@kernel.org, perex@perex.cz,
	tiwai@suse.com, alsa-devel@alsa-project.org, lgirdwood@gmail.com,
	robh+dt@kernel.org, devicetree@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] ASoC: fsl-asoc-card: Add MQS support
Date: Tue, 16 Jun 2020 15:30:37 +0800	[thread overview]
Message-ID: <1592292637-25734-2-git-send-email-shengjiu.wang@nxp.com> (raw)
In-Reply-To: <1592292637-25734-1-git-send-email-shengjiu.wang@nxp.com>

The MQS codec isn't an i2c device, so add a new platform device for it.

MQS only support playback, so add a new audio map.

Add there maybe "model" property or no "audio-routing" property in
devicetree, so add some enhancement for these two property.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
---
 sound/soc/fsl/fsl-asoc-card.c | 70 ++++++++++++++++++++++++++---------
 1 file changed, 52 insertions(+), 18 deletions(-)

diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c
index 00be73900888..2ac8cb9ddd10 100644
--- a/sound/soc/fsl/fsl-asoc-card.c
+++ b/sound/soc/fsl/fsl-asoc-card.c
@@ -119,6 +119,13 @@ static const struct snd_soc_dapm_route audio_map_ac97[] = {
 	{"ASRC-Capture",  NULL, "AC97 Capture"},
 };
 
+static const struct snd_soc_dapm_route audio_map_tx[] = {
+	/* 1st half -- Normal DAPM routes */
+	{"Playback",  NULL, "CPU-Playback"},
+	/* 2nd half -- ASRC DAPM routes */
+	{"CPU-Playback",  NULL, "ASRC-Playback"},
+};
+
 /* Add all possible widgets into here without being redundant */
 static const struct snd_soc_dapm_widget fsl_asoc_card_dapm_widgets[] = {
 	SND_SOC_DAPM_LINE("Line Out Jack", NULL),
@@ -482,6 +489,7 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
 {
 	struct device_node *cpu_np, *codec_np, *asrc_np;
 	struct device_node *np = pdev->dev.of_node;
+	struct platform_device *codec_pdev = NULL; /* used for non i2c device*/
 	struct platform_device *asrc_pdev = NULL;
 	struct platform_device *cpu_pdev;
 	struct fsl_asoc_card_priv *priv;
@@ -512,10 +520,13 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
 	}
 
 	codec_np = of_parse_phandle(np, "audio-codec", 0);
-	if (codec_np)
+	if (codec_np) {
 		codec_dev = of_find_i2c_device_by_node(codec_np);
-	else
+		if (!codec_dev)
+			codec_pdev = of_find_device_by_node(codec_np);
+	} else {
 		codec_dev = NULL;
+	}
 
 	asrc_np = of_parse_phandle(np, "audio-asrc", 0);
 	if (asrc_np)
@@ -525,6 +536,13 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
 	if (codec_dev) {
 		struct clk *codec_clk = clk_get(&codec_dev->dev, NULL);
 
+		if (!IS_ERR(codec_clk)) {
+			priv->codec_priv.mclk_freq = clk_get_rate(codec_clk);
+			clk_put(codec_clk);
+		}
+	} else if (codec_pdev) {
+		struct clk *codec_clk = clk_get(&codec_pdev->dev, NULL);
+
 		if (!IS_ERR(codec_clk)) {
 			priv->codec_priv.mclk_freq = clk_get_rate(codec_clk);
 			clk_put(codec_clk);
@@ -538,6 +556,11 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
 	/* Assign a default DAI format, and allow each card to overwrite it */
 	priv->dai_fmt = DAI_FMT_BASE;
 
+	memcpy(priv->dai_link, fsl_asoc_card_dai,
+	       sizeof(struct snd_soc_dai_link) * ARRAY_SIZE(priv->dai_link));
+
+	priv->card.dapm_routes = audio_map;
+	priv->card.num_dapm_routes = ARRAY_SIZE(audio_map);
 	/* Diversify the card configurations */
 	if (of_device_is_compatible(np, "fsl,imx-audio-cs42888")) {
 		codec_dai_name = "cs42888";
@@ -573,13 +596,25 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
 		codec_dai_name = "ac97-hifi";
 		priv->card.set_bias_level = NULL;
 		priv->dai_fmt = SND_SOC_DAIFMT_AC97;
+		priv->card.dapm_routes = audio_map_ac97;
+		priv->card.num_dapm_routes = ARRAY_SIZE(audio_map_ac97);
+	} else if (of_device_is_compatible(np, "fsl,imx-audio-mqs")) {
+		codec_dai_name = "fsl-mqs-dai";
+		priv->card.set_bias_level = NULL;
+		priv->dai_fmt = SND_SOC_DAIFMT_LEFT_J |
+				SND_SOC_DAIFMT_CBS_CFS |
+				SND_SOC_DAIFMT_NB_NF;
+		priv->dai_link[1].dpcm_playback = 1;
+		priv->dai_link[2].dpcm_playback = 1;
+		priv->card.dapm_routes = audio_map_tx;
+		priv->card.num_dapm_routes = ARRAY_SIZE(audio_map_tx);
 	} else {
 		dev_err(&pdev->dev, "unknown Device Tree compatible\n");
 		ret = -EINVAL;
 		goto asrc_fail;
 	}
 
-	if (!fsl_asoc_card_is_ac97(priv) && !codec_dev) {
+	if (!fsl_asoc_card_is_ac97(priv) && !codec_dev && !codec_pdev) {
 		dev_err(&pdev->dev, "failed to find codec device\n");
 		ret = -EPROBE_DEFER;
 		goto asrc_fail;
@@ -601,19 +636,18 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
 		priv->cpu_priv.sysclk_id[0] = FSL_SAI_CLK_MAST1;
 	}
 
-	snprintf(priv->name, sizeof(priv->name), "%s-audio",
-		 fsl_asoc_card_is_ac97(priv) ? "ac97" :
-		 codec_dev->name);
-
 	/* Initialize sound card */
 	priv->pdev = pdev;
 	priv->card.dev = &pdev->dev;
-	priv->card.name = priv->name;
+	ret = snd_soc_of_parse_card_name(&priv->card, "model");
+	if (ret) {
+		snprintf(priv->name, sizeof(priv->name), "%s-audio",
+			 fsl_asoc_card_is_ac97(priv) ? "ac97" :
+			 (codec_dev ? codec_dev->name : codec_pdev->name));
+		priv->card.name = priv->name;
+	}
 	priv->card.dai_link = priv->dai_link;
-	priv->card.dapm_routes = fsl_asoc_card_is_ac97(priv) ?
-				 audio_map_ac97 : audio_map;
 	priv->card.late_probe = fsl_asoc_card_late_probe;
-	priv->card.num_dapm_routes = ARRAY_SIZE(audio_map);
 	priv->card.dapm_widgets = fsl_asoc_card_dapm_widgets;
 	priv->card.num_dapm_widgets = ARRAY_SIZE(fsl_asoc_card_dapm_widgets);
 
@@ -621,13 +655,12 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
 	if (!asrc_pdev)
 		priv->card.num_dapm_routes /= 2;
 
-	memcpy(priv->dai_link, fsl_asoc_card_dai,
-	       sizeof(struct snd_soc_dai_link) * ARRAY_SIZE(priv->dai_link));
-
-	ret = snd_soc_of_parse_audio_routing(&priv->card, "audio-routing");
-	if (ret) {
-		dev_err(&pdev->dev, "failed to parse audio-routing: %d\n", ret);
-		goto asrc_fail;
+	if (of_property_read_bool(np, "audio-routing")) {
+		ret = snd_soc_of_parse_audio_routing(&priv->card, "audio-routing");
+		if (ret) {
+			dev_err(&pdev->dev, "failed to parse audio-routing: %d\n", ret);
+			goto asrc_fail;
+		}
 	}
 
 	/* Normal DAI Link */
@@ -724,6 +757,7 @@ static const struct of_device_id fsl_asoc_card_dt_ids[] = {
 	{ .compatible = "fsl,imx-audio-sgtl5000", },
 	{ .compatible = "fsl,imx-audio-wm8962", },
 	{ .compatible = "fsl,imx-audio-wm8960", },
+	{ .compatible = "fsl,imx-audio-mqs", },
 	{}
 };
 MODULE_DEVICE_TABLE(of, fsl_asoc_card_dt_ids);
-- 
2.21.0


  reply	other threads:[~2020-06-16  7:41 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-16  7:30 [PATCH 1/2] ASoC: bindings: fsl-asoc-card: Add compatible string for MQS Shengjiu Wang
2020-06-16  7:30 ` Shengjiu Wang [this message]
2020-06-17  0:48   ` [PATCH 2/2] ASoC: fsl-asoc-card: Add MQS support Nicolin Chen
2020-06-17  3:31     ` Shengjiu Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1592292637-25734-2-git-send-email-shengjiu.wang@nxp.com \
    --to=shengjiu.wang@nxp.com \
    --cc=Xiubo.Lee@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=nicoleotsuka@gmail.com \
    --cc=perex@perex.cz \
    --cc=robh+dt@kernel.org \
    --cc=timur@kernel.org \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).