From: Abel Vesa <abel.vesa@nxp.com>
To: Leonard Crestez <leonard.crestez@nxp.com>,
Georgi Djakov <georgi.djakov@linaro.org>,
Rob Herring <robh@kernel.org>,
Chanwoo Choi <cw00.choi@samsung.com>,
Shawn Guo <shawnguo@kernel.org>
Cc: NXP Linux Team <linux-imx@nxp.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Abel Vesa <abel.vesa@nxp.com>
Subject: [RESEND] arm64: dts: imx8m: Add NOC nodes
Date: Tue, 23 Jun 2020 12:47:01 +0300 [thread overview]
Message-ID: <1592905621-9689-1-git-send-email-abel.vesa@nxp.com> (raw)
From: Leonard Crestez <leonard.crestez@nxp.com>
Add nodes for the main interconnect of the imx8m series chips.
These nodes are bound to by devfreq and interconnect drivers.
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
---
This is part of the following patchset:
https://www.spinics.net/lists/arm-kernel/msg797026.html
All the patches are already in except this one.
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 23 +++++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 23 +++++++++++++++++++++++
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 23 +++++++++++++++++++++++
3 files changed, 69 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index c6bf8ba..00b96da 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -869,6 +869,29 @@
};
+ noc: interconnect@32700000 {
+ compatible = "fsl,imx8mm-noc", "fsl,imx8m-noc";
+ reg = <0x32700000 0x100000>;
+ clocks = <&clk IMX8MM_CLK_NOC>;
+ fsl,ddrc = <&ddrc>;
+ #interconnect-cells = <1>;
+ operating-points-v2 = <&noc_opp_table>;
+
+ noc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-150M {
+ opp-hz = /bits/ 64 <150000000>;
+ };
+ opp-375M {
+ opp-hz = /bits/ 64 <375000000>;
+ };
+ opp-750M {
+ opp-hz = /bits/ 64 <750000000>;
+ };
+ };
+ };
+
aips4: bus@32c00000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x32c00000 0x400000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 9a4b65a..656fa9b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -756,6 +756,29 @@
};
+ noc: interconnect@32700000 {
+ compatible = "fsl,imx8mn-noc", "fsl,imx8m-noc";
+ reg = <0x32700000 0x100000>;
+ clocks = <&clk IMX8MN_CLK_NOC>;
+ fsl,ddrc = <&ddrc>;
+ #interconnect-cells = <1>;
+ operating-points-v2 = <&noc_opp_table>;
+
+ noc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-100M {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+ opp-600M {
+ opp-hz = /bits/ 64 <600000000>;
+ };
+ opp-800M {
+ opp-hz = /bits/ 64 <800000000>;
+ };
+ };
+ };
+
aips4: bus@32c00000 {
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x32c00000 0x400000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 54bed64..6c24ec1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1037,6 +1037,29 @@
};
};
+ noc: interconnect@32700000 {
+ compatible = "fsl,imx8mq-noc", "fsl,imx8m-noc";
+ reg = <0x32700000 0x100000>;
+ clocks = <&clk IMX8MQ_CLK_NOC>;
+ fsl,ddrc = <&ddrc>;
+ #interconnect-cells = <1>;
+ operating-points-v2 = <&noc_opp_table>;
+
+ noc_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-133M {
+ opp-hz = /bits/ 64 <133333333>;
+ };
+ opp-400M {
+ opp-hz = /bits/ 64 <400000000>;
+ };
+ opp-800M {
+ opp-hz = /bits/ 64 <800000000>;
+ };
+ };
+ };
+
bus@32c00000 { /* AIPS4 */
compatible = "fsl,aips-bus", "simple-bus";
reg = <0x32c00000 0x400000>;
--
2.7.4
next reply other threads:[~2020-06-23 9:47 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-23 9:47 Abel Vesa [this message]
2020-07-01 17:39 ` [RESEND] arm64: dts: imx8m: Add NOC nodes Georgi Djakov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1592905621-9689-1-git-send-email-abel.vesa@nxp.com \
--to=abel.vesa@nxp.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=georgi.djakov@linaro.org \
--cc=leonard.crestez@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).