linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "tip-bot2 for Ahmed S. Darwish" <tip-bot2@linutronix.de>
To: linux-tip-commits@vger.kernel.org
Cc: "Ahmed S. Darwish" <a.darwish@linutronix.de>,
	"Peter Zijlstra (Intel)" <peterz@infradead.org>,
	x86 <x86@kernel.org>, LKML <linux-kernel@vger.kernel.org>
Subject: [tip: locking/core] seqlock: Extend seqcount API with associated locks
Date: Wed, 29 Jul 2020 14:33:37 -0000	[thread overview]
Message-ID: <159603321724.4006.9392358919253025015.tip-bot2@tip-bot2> (raw)
In-Reply-To: <20200720155530.1173732-10-a.darwish@linutronix.de>

The following commit has been merged into the locking/core branch of tip:

Commit-ID:     55f3560df975f557c48aa6afc636808f31ecb87a
Gitweb:        https://git.kernel.org/tip/55f3560df975f557c48aa6afc636808f31ecb87a
Author:        Ahmed S. Darwish <a.darwish@linutronix.de>
AuthorDate:    Mon, 20 Jul 2020 17:55:15 +02:00
Committer:     Peter Zijlstra <peterz@infradead.org>
CommitterDate: Wed, 29 Jul 2020 16:14:25 +02:00

seqlock: Extend seqcount API with associated locks

A sequence counter write side critical section must be protected by some
form of locking to serialize writers. If the serialization primitive is
not disabling preemption implicitly, preemption has to be explicitly
disabled before entering the write side critical section.

There is no built-in debugging mechanism to verify that the lock used
for writer serialization is held and preemption is disabled. Some usage
sites like dma-buf have explicit lockdep checks for the writer-side
lock, but this covers only a small portion of the sequence counter usage
in the kernel.

Add new sequence counter types which allows to associate a lock to the
sequence counter at initialization time. The seqcount API functions are
extended to provide appropriate lockdep assertions depending on the
seqcount/lock type.

For sequence counters with associated locks that do not implicitly
disable preemption, preemption protection is enforced in the sequence
counter write side functions. This removes the need to explicitly add
preempt_disable/enable() around the write side critical sections: the
write_begin/end() functions for these new sequence counter types
automatically do this.

Introduce the following seqcount types with associated locks:

     seqcount_spinlock_t
     seqcount_raw_spinlock_t
     seqcount_rwlock_t
     seqcount_mutex_t
     seqcount_ww_mutex_t

Extend the seqcount read and write functions to branch out to the
specific seqcount_LOCKTYPE_t implementation at compile-time. This avoids
kernel API explosion per each new seqcount_LOCKTYPE_t added. Add such
compile-time type detection logic into a new, internal, seqlock header.

Document the proper seqcount_LOCKTYPE_t usage, and rationale, at
Documentation/locking/seqlock.rst.

If lockdep is disabled, this lock association is compiled out and has
neither storage size nor runtime overhead.

Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200720155530.1173732-10-a.darwish@linutronix.de
---
 Documentation/locking/seqlock.rst |  52 +++-
 include/linux/seqlock.h           | 464 ++++++++++++++++++++++++-----
 2 files changed, 447 insertions(+), 69 deletions(-)

diff --git a/Documentation/locking/seqlock.rst b/Documentation/locking/seqlock.rst
index 366dd36..62c5ad9 100644
--- a/Documentation/locking/seqlock.rst
+++ b/Documentation/locking/seqlock.rst
@@ -87,6 +87,58 @@ Read path::
 	} while (read_seqcount_retry(&foo_seqcount, seq));
 
 
+.. _seqcount_locktype_t:
+
+Sequence counters with associated locks (``seqcount_LOCKTYPE_t``)
+-----------------------------------------------------------------
+
+As discussed at :ref:`seqcount_t`, sequence count write side critical
+sections must be serialized and non-preemptible. This variant of
+sequence counters associate the lock used for writer serialization at
+initialization time, which enables lockdep to validate that the write
+side critical sections are properly serialized.
+
+This lock association is a NOOP if lockdep is disabled and has neither
+storage nor runtime overhead. If lockdep is enabled, the lock pointer is
+stored in struct seqcount and lockdep's "lock is held" assertions are
+injected at the beginning of the write side critical section to validate
+that it is properly protected.
+
+For lock types which do not implicitly disable preemption, preemption
+protection is enforced in the write side function.
+
+The following sequence counters with associated locks are defined:
+
+  - ``seqcount_spinlock_t``
+  - ``seqcount_raw_spinlock_t``
+  - ``seqcount_rwlock_t``
+  - ``seqcount_mutex_t``
+  - ``seqcount_ww_mutex_t``
+
+The plain seqcount read and write APIs branch out to the specific
+seqcount_LOCKTYPE_t implementation at compile-time. This avoids kernel
+API explosion per each new seqcount LOCKTYPE.
+
+Initialization (replace "LOCKTYPE" with one of the supported locks)::
+
+	/* dynamic */
+	seqcount_LOCKTYPE_t foo_seqcount;
+	seqcount_LOCKTYPE_init(&foo_seqcount, &lock);
+
+	/* static */
+	static seqcount_LOCKTYPE_t foo_seqcount =
+		SEQCNT_LOCKTYPE_ZERO(foo_seqcount, &lock);
+
+	/* C99 struct init */
+	struct {
+		.seq   = SEQCNT_LOCKTYPE_ZERO(foo.seq, &lock),
+	} foo;
+
+Write path: same as in :ref:`seqcount_t`, while running from a context
+with the associated LOCKTYPE lock acquired.
+
+Read path: same as in :ref:`seqcount_t`.
+
 .. _seqlock_t:
 
 Sequential locks (``seqlock_t``)
diff --git a/include/linux/seqlock.h b/include/linux/seqlock.h
index 54bc204..8c16a49 100644
--- a/include/linux/seqlock.h
+++ b/include/linux/seqlock.h
@@ -10,13 +10,17 @@
  *
  * Copyrights:
  * - Based on x86_64 vsyscall gettimeofday: Keith Owens, Andrea Arcangeli
+ * - Sequence counters with associated locks, (C) 2020 Linutronix GmbH
  */
 
-#include <linux/spinlock.h>
-#include <linux/preempt.h>
-#include <linux/lockdep.h>
 #include <linux/compiler.h>
 #include <linux/kcsan-checks.h>
+#include <linux/lockdep.h>
+#include <linux/mutex.h>
+#include <linux/preempt.h>
+#include <linux/spinlock.h>
+#include <linux/ww_mutex.h>
+
 #include <asm/processor.h>
 
 /*
@@ -48,6 +52,10 @@
  * This mechanism can't be used if the protected data contains pointers,
  * as the writer can invalidate a pointer that a reader is following.
  *
+ * If the write serialization mechanism is one of the common kernel
+ * locking primitives, use a sequence counter with associated lock
+ * (seqcount_LOCKTYPE_t) instead.
+ *
  * If it's desired to automatically handle the sequence counter writer
  * serialization and non-preemptibility requirements, use a sequential
  * lock (seqlock_t) instead.
@@ -108,9 +116,267 @@ static inline void seqcount_lockdep_reader_access(const seqcount_t *s)
  */
 #define SEQCNT_ZERO(name) { .sequence = 0, SEQCOUNT_DEP_MAP_INIT(name) }
 
+/*
+ * Sequence counters with associated locks (seqcount_LOCKTYPE_t)
+ *
+ * A sequence counter which associates the lock used for writer
+ * serialization at initialization time. This enables lockdep to validate
+ * that the write side critical section is properly serialized.
+ *
+ * For associated locks which do not implicitly disable preemption,
+ * preemption protection is enforced in the write side function.
+ *
+ * Lockdep is never used in any for the raw write variants.
+ *
+ * See Documentation/locking/seqlock.rst
+ */
+
+#ifdef CONFIG_LOCKDEP
+#define __SEQ_LOCKDEP(expr)	expr
+#else
+#define __SEQ_LOCKDEP(expr)
+#endif
+
+#define SEQCOUNT_LOCKTYPE_ZERO(seq_name, assoc_lock) {			\
+	.seqcount		= SEQCNT_ZERO(seq_name.seqcount),	\
+	__SEQ_LOCKDEP(.lock	= (assoc_lock))				\
+}
+
+#define seqcount_locktype_init(s, assoc_lock)				\
+do {									\
+	seqcount_init(&(s)->seqcount);					\
+	__SEQ_LOCKDEP((s)->lock = (assoc_lock));			\
+} while (0)
+
+/**
+ * typedef seqcount_spinlock_t - sequence counter with spinlock associated
+ * @seqcount:	The real sequence counter
+ * @lock:	Pointer to the associated spinlock
+ *
+ * A plain sequence counter with external writer synchronization by a
+ * spinlock. The spinlock is associated to the sequence count in the
+ * static initializer or init function. This enables lockdep to validate
+ * that the write side critical section is properly serialized.
+ */
+typedef struct seqcount_spinlock {
+	seqcount_t	seqcount;
+	__SEQ_LOCKDEP(spinlock_t	*lock);
+} seqcount_spinlock_t;
+
+/**
+ * SEQCNT_SPINLOCK_ZERO - static initializer for seqcount_spinlock_t
+ * @name:	Name of the seqcount_spinlock_t instance
+ * @lock:	Pointer to the associated spinlock
+ */
+#define SEQCNT_SPINLOCK_ZERO(name, lock)				\
+	SEQCOUNT_LOCKTYPE_ZERO(name, lock)
+
+/**
+ * seqcount_spinlock_init - runtime initializer for seqcount_spinlock_t
+ * @s:		Pointer to the seqcount_spinlock_t instance
+ * @lock:	Pointer to the associated spinlock
+ */
+#define seqcount_spinlock_init(s, lock)					\
+	seqcount_locktype_init(s, lock)
+
+/**
+ * typedef seqcount_raw_spinlock_t - sequence count with raw spinlock associated
+ * @seqcount:	The real sequence counter
+ * @lock:	Pointer to the associated raw spinlock
+ *
+ * A plain sequence counter with external writer synchronization by a
+ * raw spinlock. The raw spinlock is associated to the sequence count in
+ * the static initializer or init function. This enables lockdep to
+ * validate that the write side critical section is properly serialized.
+ */
+typedef struct seqcount_raw_spinlock {
+	seqcount_t      seqcount;
+	__SEQ_LOCKDEP(raw_spinlock_t	*lock);
+} seqcount_raw_spinlock_t;
+
+/**
+ * SEQCNT_RAW_SPINLOCK_ZERO - static initializer for seqcount_raw_spinlock_t
+ * @name:	Name of the seqcount_raw_spinlock_t instance
+ * @lock:	Pointer to the associated raw_spinlock
+ */
+#define SEQCNT_RAW_SPINLOCK_ZERO(name, lock)				\
+	SEQCOUNT_LOCKTYPE_ZERO(name, lock)
+
+/**
+ * seqcount_raw_spinlock_init - runtime initializer for seqcount_raw_spinlock_t
+ * @s:		Pointer to the seqcount_raw_spinlock_t instance
+ * @lock:	Pointer to the associated raw_spinlock
+ */
+#define seqcount_raw_spinlock_init(s, lock)				\
+	seqcount_locktype_init(s, lock)
+
+/**
+ * typedef seqcount_rwlock_t - sequence count with rwlock associated
+ * @seqcount:	The real sequence counter
+ * @lock:	Pointer to the associated rwlock
+ *
+ * A plain sequence counter with external writer synchronization by a
+ * rwlock. The rwlock is associated to the sequence count in the static
+ * initializer or init function. This enables lockdep to validate that
+ * the write side critical section is properly serialized.
+ */
+typedef struct seqcount_rwlock {
+	seqcount_t      seqcount;
+	__SEQ_LOCKDEP(rwlock_t		*lock);
+} seqcount_rwlock_t;
+
+/**
+ * SEQCNT_RWLOCK_ZERO - static initializer for seqcount_rwlock_t
+ * @name:	Name of the seqcount_rwlock_t instance
+ * @lock:	Pointer to the associated rwlock
+ */
+#define SEQCNT_RWLOCK_ZERO(name, lock)					\
+	SEQCOUNT_LOCKTYPE_ZERO(name, lock)
+
+/**
+ * seqcount_rwlock_init - runtime initializer for seqcount_rwlock_t
+ * @s:		Pointer to the seqcount_rwlock_t instance
+ * @lock:	Pointer to the associated rwlock
+ */
+#define seqcount_rwlock_init(s, lock)					\
+	seqcount_locktype_init(s, lock)
+
+/**
+ * typedef seqcount_mutex_t - sequence count with mutex associated
+ * @seqcount:	The real sequence counter
+ * @lock:	Pointer to the associated mutex
+ *
+ * A plain sequence counter with external writer synchronization by a
+ * mutex. The mutex is associated to the sequence counter in the static
+ * initializer or init function. This enables lockdep to validate that
+ * the write side critical section is properly serialized.
+ *
+ * The write side API functions write_seqcount_begin()/end() automatically
+ * disable and enable preemption when used with seqcount_mutex_t.
+ */
+typedef struct seqcount_mutex {
+	seqcount_t      seqcount;
+	__SEQ_LOCKDEP(struct mutex	*lock);
+} seqcount_mutex_t;
+
+/**
+ * SEQCNT_MUTEX_ZERO - static initializer for seqcount_mutex_t
+ * @name:	Name of the seqcount_mutex_t instance
+ * @lock:	Pointer to the associated mutex
+ */
+#define SEQCNT_MUTEX_ZERO(name, lock)					\
+	SEQCOUNT_LOCKTYPE_ZERO(name, lock)
+
+/**
+ * seqcount_mutex_init - runtime initializer for seqcount_mutex_t
+ * @s:		Pointer to the seqcount_mutex_t instance
+ * @lock:	Pointer to the associated mutex
+ */
+#define seqcount_mutex_init(s, lock)					\
+	seqcount_locktype_init(s, lock)
+
+/**
+ * typedef seqcount_ww_mutex_t - sequence count with ww_mutex associated
+ * @seqcount:	The real sequence counter
+ * @lock:	Pointer to the associated ww_mutex
+ *
+ * A plain sequence counter with external writer synchronization by a
+ * ww_mutex. The ww_mutex is associated to the sequence counter in the static
+ * initializer or init function. This enables lockdep to validate that
+ * the write side critical section is properly serialized.
+ *
+ * The write side API functions write_seqcount_begin()/end() automatically
+ * disable and enable preemption when used with seqcount_ww_mutex_t.
+ */
+typedef struct seqcount_ww_mutex {
+	seqcount_t      seqcount;
+	__SEQ_LOCKDEP(struct ww_mutex	*lock);
+} seqcount_ww_mutex_t;
+
+/**
+ * SEQCNT_WW_MUTEX_ZERO - static initializer for seqcount_ww_mutex_t
+ * @name:	Name of the seqcount_ww_mutex_t instance
+ * @lock:	Pointer to the associated ww_mutex
+ */
+#define SEQCNT_WW_MUTEX_ZERO(name, lock)				\
+	SEQCOUNT_LOCKTYPE_ZERO(name, lock)
+
+/**
+ * seqcount_ww_mutex_init - runtime initializer for seqcount_ww_mutex_t
+ * @s:		Pointer to the seqcount_ww_mutex_t instance
+ * @lock:	Pointer to the associated ww_mutex
+ */
+#define seqcount_ww_mutex_init(s, lock)					\
+	seqcount_locktype_init(s, lock)
+
+/*
+ * @preempt: Is the associated write serialization lock preemtpible?
+ */
+#define SEQCOUNT_LOCKTYPE(locktype, preempt, lockmember)		\
+static inline seqcount_t *						\
+__seqcount_##locktype##_ptr(seqcount_##locktype##_t *s)			\
+{									\
+	return &s->seqcount;						\
+}									\
+									\
+static inline bool							\
+__seqcount_##locktype##_preemptible(seqcount_##locktype##_t *s)		\
+{									\
+	return preempt;							\
+}									\
+									\
+static inline void							\
+__seqcount_##locktype##_assert(seqcount_##locktype##_t *s)		\
+{									\
+	__SEQ_LOCKDEP(lockdep_assert_held(lockmember));			\
+}
+
+/*
+ * Similar hooks, but for plain seqcount_t
+ */
+
+static inline seqcount_t *__seqcount_ptr(seqcount_t *s)
+{
+	return s;
+}
+
+static inline bool __seqcount_preemptible(seqcount_t *s)
+{
+	return false;
+}
+
+static inline void __seqcount_assert(seqcount_t *s)
+{
+	lockdep_assert_preemption_disabled();
+}
+
+/*
+ * @s: Pointer to seqcount_locktype_t, generated hooks first parameter.
+ */
+SEQCOUNT_LOCKTYPE(raw_spinlock,	false,	s->lock)
+SEQCOUNT_LOCKTYPE(spinlock,	false,	s->lock)
+SEQCOUNT_LOCKTYPE(rwlock,	false,	s->lock)
+SEQCOUNT_LOCKTYPE(mutex,	true,	s->lock)
+SEQCOUNT_LOCKTYPE(ww_mutex,	true,	&s->lock->base)
+
+#define __seqprop_case(s, locktype, prop)				\
+	seqcount_##locktype##_t: __seqcount_##locktype##_##prop((void *)(s))
+
+#define __seqprop(s, prop) _Generic(*(s),				\
+	seqcount_t:		__seqcount_##prop((void *)(s)),		\
+	__seqprop_case((s),	raw_spinlock,	prop),			\
+	__seqprop_case((s),	spinlock,	prop),			\
+	__seqprop_case((s),	rwlock,		prop),			\
+	__seqprop_case((s),	mutex,		prop),			\
+	__seqprop_case((s),	ww_mutex,	prop))
+
+#define __to_seqcount_t(s)				__seqprop(s, ptr)
+#define __associated_lock_exists_and_is_preemptible(s)	__seqprop(s, preemptible)
+#define __assert_write_section_is_protected(s)		__seqprop(s, assert)
+
 /**
  * __read_seqcount_begin() - begin a seqcount_t read section w/o barrier
- * @s: Pointer to seqcount_t
+ * @s: Pointer to seqcount_t or any of the seqcount_locktype_t variants
  *
  * __read_seqcount_begin is like read_seqcount_begin, but has no smp_rmb()
  * barrier. Callers should ensure that smp_rmb() or equivalent ordering is
@@ -122,7 +388,10 @@ static inline void seqcount_lockdep_reader_access(const seqcount_t *s)
  *
  * Return: count to be passed to read_seqcount_retry()
  */
-static inline unsigned __read_seqcount_begin(const seqcount_t *s)
+#define __read_seqcount_begin(s)					\
+	__read_seqcount_t_begin(__to_seqcount_t(s))
+
+static inline unsigned __read_seqcount_t_begin(const seqcount_t *s)
 {
 	unsigned ret;
 
@@ -138,32 +407,38 @@ repeat:
 
 /**
  * raw_read_seqcount_begin() - begin a seqcount_t read section w/o lockdep
- * @s: Pointer to seqcount_t
+ * @s: Pointer to seqcount_t or any of the seqcount_locktype_t variants
  *
  * Return: count to be passed to read_seqcount_retry()
  */
-static inline unsigned raw_read_seqcount_begin(const seqcount_t *s)
+#define raw_read_seqcount_begin(s)					\
+	raw_read_seqcount_t_begin(__to_seqcount_t(s))
+
+static inline unsigned raw_read_seqcount_t_begin(const seqcount_t *s)
 {
-	unsigned ret = __read_seqcount_begin(s);
+	unsigned ret = __read_seqcount_t_begin(s);
 	smp_rmb();
 	return ret;
 }
 
 /**
  * read_seqcount_begin() - begin a seqcount_t read critical section
- * @s: Pointer to seqcount_t
+ * @s: Pointer to seqcount_t or any of the seqcount_locktype_t variants
  *
  * Return: count to be passed to read_seqcount_retry()
  */
-static inline unsigned read_seqcount_begin(const seqcount_t *s)
+#define read_seqcount_begin(s)						\
+	read_seqcount_t_begin(__to_seqcount_t(s))
+
+static inline unsigned read_seqcount_t_begin(const seqcount_t *s)
 {
 	seqcount_lockdep_reader_access(s);
-	return raw_read_seqcount_begin(s);
+	return raw_read_seqcount_t_begin(s);
 }
 
 /**
  * raw_read_seqcount() - read the raw seqcount_t counter value
- * @s: Pointer to seqcount_t
+ * @s: Pointer to seqcount_t or any of the seqcount_locktype_t variants
  *
  * raw_read_seqcount opens a read critical section of the given
  * seqcount_t, without any lockdep checking, and without checking or
@@ -172,7 +447,10 @@ static inline unsigned read_seqcount_begin(const seqcount_t *s)
  *
  * Return: count to be passed to read_seqcount_retry()
  */
-static inline unsigned raw_read_seqcount(const seqcount_t *s)
+#define raw_read_seqcount(s)						\
+	raw_read_seqcount_t(__to_seqcount_t(s))
+
+static inline unsigned raw_read_seqcount_t(const seqcount_t *s)
 {
 	unsigned ret = READ_ONCE(s->sequence);
 	smp_rmb();
@@ -183,7 +461,7 @@ static inline unsigned raw_read_seqcount(const seqcount_t *s)
 /**
  * raw_seqcount_begin() - begin a seqcount_t read critical section w/o
  *                        lockdep and w/o counter stabilization
- * @s: Pointer to seqcount_t
+ * @s: Pointer to seqcount_t or any of the seqcount_locktype_t variants
  *
  * raw_seqcount_begin opens a read critical section of the given
  * seqcount_t. Unlike read_seqcount_begin(), this function will not wait
@@ -197,18 +475,21 @@ static inline unsigned raw_read_seqcount(const seqcount_t *s)
  *
  * Return: count to be passed to read_seqcount_retry()
  */
-static inline unsigned raw_seqcount_begin(const seqcount_t *s)
+#define raw_seqcount_begin(s)						\
+	raw_seqcount_t_begin(__to_seqcount_t(s))
+
+static inline unsigned raw_seqcount_t_begin(const seqcount_t *s)
 {
 	/*
 	 * If the counter is odd, let read_seqcount_retry() fail
 	 * by decrementing the counter.
 	 */
-	return raw_read_seqcount(s) & ~1;
+	return raw_read_seqcount_t(s) & ~1;
 }
 
 /**
  * __read_seqcount_retry() - end a seqcount_t read section w/o barrier
- * @s: Pointer to seqcount_t
+ * @s: Pointer to seqcount_t or any of the seqcount_locktype_t variants
  * @start: count, from read_seqcount_begin()
  *
  * __read_seqcount_retry is like read_seqcount_retry, but has no smp_rmb()
@@ -221,7 +502,10 @@ static inline unsigned raw_seqcount_begin(const seqcount_t *s)
  *
  * Return: true if a read section retry is required, else false
  */
-static inline int __read_seqcount_retry(const seqcount_t *s, unsigned start)
+#define __read_seqcount_retry(s, start)					\
+	__read_seqcount_t_retry(__to_seqcount_t(s), start)
+
+static inline int __read_seqcount_t_retry(const seqcount_t *s, unsigned start)
 {
 	kcsan_atomic_next(0);
 	return unlikely(READ_ONCE(s->sequence) != start);
@@ -229,7 +513,7 @@ static inline int __read_seqcount_retry(const seqcount_t *s, unsigned start)
 
 /**
  * read_seqcount_retry() - end a seqcount_t read critical section
- * @s: Pointer to seqcount_t
+ * @s: Pointer to seqcount_t or any of the seqcount_locktype_t variants
  * @start: count, from read_seqcount_begin()
  *
  * read_seqcount_retry closes the read critical section of given
@@ -238,17 +522,28 @@ static inline int __read_seqcount_retry(const seqcount_t *s, unsigned start)
  *
  * Return: true if a read section retry is required, else false
  */
-static inline int read_seqcount_retry(const seqcount_t *s, unsigned start)
+#define read_seqcount_retry(s, start)					\
+	read_seqcount_t_retry(__to_seqcount_t(s), start)
+
+static inline int read_seqcount_t_retry(const seqcount_t *s, unsigned start)
 {
 	smp_rmb();
-	return __read_seqcount_retry(s, start);
+	return __read_seqcount_t_retry(s, start);
 }
 
 /**
  * raw_write_seqcount_begin() - start a seqcount_t write section w/o lockdep
- * @s: Pointer to seqcount_t
+ * @s: Pointer to seqcount_t or any of the seqcount_locktype_t variants
  */
-static inline void raw_write_seqcount_begin(seqcount_t *s)
+#define raw_write_seqcount_begin(s)					\
+do {									\
+	if (__associated_lock_exists_and_is_preemptible(s))		\
+		preempt_disable();					\
+									\
+	raw_write_seqcount_t_begin(__to_seqcount_t(s));			\
+} while (0)
+
+static inline void raw_write_seqcount_t_begin(seqcount_t *s)
 {
 	kcsan_nestable_atomic_begin();
 	s->sequence++;
@@ -257,49 +552,50 @@ static inline void raw_write_seqcount_begin(seqcount_t *s)
 
 /**
  * raw_write_seqcount_end() - end a seqcount_t write section w/o lockdep
- * @s: Pointer to seqcount_t
+ * @s: Pointer to seqcount_t or any of the seqcount_locktype_t variants
  */
-static inline void raw_write_seqcount_end(seqcount_t *s)
+#define raw_write_seqcount_end(s)					\
+do {									\
+	raw_write_seqcount_t_end(__to_seqcount_t(s));			\
+									\
+	if (__associated_lock_exists_and_is_preemptible(s))		\
+		preempt_enable();					\
+} while (0)
+
+static inline void raw_write_seqcount_t_end(seqcount_t *s)
 {
 	smp_wmb();
 	s->sequence++;
 	kcsan_nestable_atomic_end();
 }
 
-static inline void __write_seqcount_begin_nested(seqcount_t *s, int subclass)
-{
-	raw_write_seqcount_begin(s);
-	seqcount_acquire(&s->dep_map, subclass, 0, _RET_IP_);
-}
-
 /**
  * write_seqcount_begin_nested() - start a seqcount_t write section with
  *                                 custom lockdep nesting level
- * @s: Pointer to seqcount_t
+ * @s: Pointer to seqcount_t or any of the seqcount_locktype_t variants
  * @subclass: lockdep nesting level
  *
  * See Documentation/locking/lockdep-design.rst
  */
-static inline void write_seqcount_begin_nested(seqcount_t *s, int subclass)
-{
-	lockdep_assert_preemption_disabled();
-	__write_seqcount_begin_nested(s, subclass);
-}
-
-/*
- * A write_seqcount_begin() variant w/o lockdep non-preemptibility checks.
- *
- * Use for internal seqlock.h code where it's known that preemption is
- * already disabled. For example, seqlock_t write side functions.
- */
-static inline void __write_seqcount_begin(seqcount_t *s)
+#define write_seqcount_begin_nested(s, subclass)			\
+do {									\
+	__assert_write_section_is_protected(s);				\
+									\
+	if (__associated_lock_exists_and_is_preemptible(s))		\
+		preempt_disable();					\
+									\
+	write_seqcount_t_begin_nested(__to_seqcount_t(s), subclass);	\
+} while (0)
+
+static inline void write_seqcount_t_begin_nested(seqcount_t *s, int subclass)
 {
-	__write_seqcount_begin_nested(s, 0);
+	raw_write_seqcount_t_begin(s);
+	seqcount_acquire(&s->dep_map, subclass, 0, _RET_IP_);
 }
 
 /**
  * write_seqcount_begin() - start a seqcount_t write side critical section
- * @s: Pointer to seqcount_t
+ * @s: Pointer to seqcount_t or any of the seqcount_locktype_t variants
  *
  * write_seqcount_begin opens a write side critical section of the given
  * seqcount_t.
@@ -308,26 +604,44 @@ static inline void __write_seqcount_begin(seqcount_t *s)
  * non-preemptible. If readers can be invoked from hardirq or softirq
  * context, interrupts or bottom halves must be respectively disabled.
  */
-static inline void write_seqcount_begin(seqcount_t *s)
+#define write_seqcount_begin(s)						\
+do {									\
+	__assert_write_section_is_protected(s);				\
+									\
+	if (__associated_lock_exists_and_is_preemptible(s))		\
+		preempt_disable();					\
+									\
+	write_seqcount_t_begin(__to_seqcount_t(s));			\
+} while (0)
+
+static inline void write_seqcount_t_begin(seqcount_t *s)
 {
-	write_seqcount_begin_nested(s, 0);
+	write_seqcount_t_begin_nested(s, 0);
 }
 
 /**
  * write_seqcount_end() - end a seqcount_t write side critical section
- * @s: Pointer to seqcount_t
+ * @s: Pointer to seqcount_t or any of the seqcount_locktype_t variants
  *
  * The write section must've been opened with write_seqcount_begin().
  */
-static inline void write_seqcount_end(seqcount_t *s)
+#define write_seqcount_end(s)						\
+do {									\
+	write_seqcount_t_end(__to_seqcount_t(s));			\
+									\
+	if (__associated_lock_exists_and_is_preemptible(s))		\
+		preempt_enable();					\
+} while (0)
+
+static inline void write_seqcount_t_end(seqcount_t *s)
 {
 	seqcount_release(&s->dep_map, _RET_IP_);
-	raw_write_seqcount_end(s);
+	raw_write_seqcount_t_end(s);
 }
 
 /**
  * raw_write_seqcount_barrier() - do a seqcount_t write barrier
- * @s: Pointer to seqcount_t
+ * @s: Pointer to seqcount_t or any of the seqcount_locktype_t variants
  *
  * This can be used to provide an ordering guarantee instead of the usual
  * consistency guarantee. It is one wmb cheaper, because it can collapse
@@ -366,7 +680,10 @@ static inline void write_seqcount_end(seqcount_t *s)
  *		WRITE_ONCE(X, false);
  *      }
  */
-static inline void raw_write_seqcount_barrier(seqcount_t *s)
+#define raw_write_seqcount_barrier(s)					\
+	raw_write_seqcount_t_barrier(__to_seqcount_t(s))
+
+static inline void raw_write_seqcount_t_barrier(seqcount_t *s)
 {
 	kcsan_nestable_atomic_begin();
 	s->sequence++;
@@ -378,12 +695,15 @@ static inline void raw_write_seqcount_barrier(seqcount_t *s)
 /**
  * write_seqcount_invalidate() - invalidate in-progress seqcount_t read
  *                               side operations
- * @s: Pointer to seqcount_t
+ * @s: Pointer to seqcount_t or any of the seqcount_locktype_t variants
  *
  * After write_seqcount_invalidate, no seqcount_t read side operations
  * will complete successfully and see data older than this.
  */
-static inline void write_seqcount_invalidate(seqcount_t *s)
+#define write_seqcount_invalidate(s)					\
+	write_seqcount_t_invalidate(__to_seqcount_t(s))
+
+static inline void write_seqcount_t_invalidate(seqcount_t *s)
 {
 	smp_wmb();
 	kcsan_nestable_atomic_begin();
@@ -393,7 +713,7 @@ static inline void write_seqcount_invalidate(seqcount_t *s)
 
 /**
  * raw_read_seqcount_latch() - pick even/odd seqcount_t latch data copy
- * @s: Pointer to seqcount_t
+ * @s: Pointer to seqcount_t or any of the seqcount_locktype_t variants
  *
  * Use seqcount_t latching to switch between two storage places protected
  * by a sequence counter. Doing so allows having interruptible, preemptible,
@@ -406,7 +726,10 @@ static inline void write_seqcount_invalidate(seqcount_t *s)
  * picking which data copy to read. The full counter value must then be
  * checked with read_seqcount_retry().
  */
-static inline int raw_read_seqcount_latch(seqcount_t *s)
+#define raw_read_seqcount_latch(s)					\
+	raw_read_seqcount_t_latch(__to_seqcount_t(s))
+
+static inline int raw_read_seqcount_t_latch(seqcount_t *s)
 {
 	/* Pairs with the first smp_wmb() in raw_write_seqcount_latch() */
 	int seq = READ_ONCE(s->sequence); /* ^^^ */
@@ -415,7 +738,7 @@ static inline int raw_read_seqcount_latch(seqcount_t *s)
 
 /**
  * raw_write_seqcount_latch() - redirect readers to even/odd copy
- * @s: Pointer to seqcount_t
+ * @s: Pointer to seqcount_t or any of the seqcount_locktype_t variants
  *
  * The latch technique is a multiversion concurrency control method that allows
  * queries during non-atomic modifications. If you can guarantee queries never
@@ -494,7 +817,10 @@ static inline int raw_read_seqcount_latch(seqcount_t *s)
  *	When data is a dynamic data structure; one should use regular RCU
  *	patterns to manage the lifetimes of the objects within.
  */
-static inline void raw_write_seqcount_latch(seqcount_t *s)
+#define raw_write_seqcount_latch(s)					\
+	raw_write_seqcount_t_latch(__to_seqcount_t(s))
+
+static inline void raw_write_seqcount_t_latch(seqcount_t *s)
 {
        smp_wmb();      /* prior stores before incrementing "sequence" */
        s->sequence++;
@@ -592,7 +918,7 @@ static inline unsigned read_seqretry(const seqlock_t *sl, unsigned start)
 static inline void write_seqlock(seqlock_t *sl)
 {
 	spin_lock(&sl->lock);
-	__write_seqcount_begin(&sl->seqcount);
+	write_seqcount_t_begin(&sl->seqcount);
 }
 
 /**
@@ -604,7 +930,7 @@ static inline void write_seqlock(seqlock_t *sl)
  */
 static inline void write_sequnlock(seqlock_t *sl)
 {
-	write_seqcount_end(&sl->seqcount);
+	write_seqcount_t_end(&sl->seqcount);
 	spin_unlock(&sl->lock);
 }
 
@@ -618,7 +944,7 @@ static inline void write_sequnlock(seqlock_t *sl)
 static inline void write_seqlock_bh(seqlock_t *sl)
 {
 	spin_lock_bh(&sl->lock);
-	__write_seqcount_begin(&sl->seqcount);
+	write_seqcount_t_begin(&sl->seqcount);
 }
 
 /**
@@ -631,7 +957,7 @@ static inline void write_seqlock_bh(seqlock_t *sl)
  */
 static inline void write_sequnlock_bh(seqlock_t *sl)
 {
-	write_seqcount_end(&sl->seqcount);
+	write_seqcount_t_end(&sl->seqcount);
 	spin_unlock_bh(&sl->lock);
 }
 
@@ -645,7 +971,7 @@ static inline void write_sequnlock_bh(seqlock_t *sl)
 static inline void write_seqlock_irq(seqlock_t *sl)
 {
 	spin_lock_irq(&sl->lock);
-	__write_seqcount_begin(&sl->seqcount);
+	write_seqcount_t_begin(&sl->seqcount);
 }
 
 /**
@@ -657,7 +983,7 @@ static inline void write_seqlock_irq(seqlock_t *sl)
  */
 static inline void write_sequnlock_irq(seqlock_t *sl)
 {
-	write_seqcount_end(&sl->seqcount);
+	write_seqcount_t_end(&sl->seqcount);
 	spin_unlock_irq(&sl->lock);
 }
 
@@ -666,7 +992,7 @@ static inline unsigned long __write_seqlock_irqsave(seqlock_t *sl)
 	unsigned long flags;
 
 	spin_lock_irqsave(&sl->lock, flags);
-	__write_seqcount_begin(&sl->seqcount);
+	write_seqcount_t_begin(&sl->seqcount);
 	return flags;
 }
 
@@ -695,13 +1021,13 @@ static inline unsigned long __write_seqlock_irqsave(seqlock_t *sl)
 static inline void
 write_sequnlock_irqrestore(seqlock_t *sl, unsigned long flags)
 {
-	write_seqcount_end(&sl->seqcount);
+	write_seqcount_t_end(&sl->seqcount);
 	spin_unlock_irqrestore(&sl->lock, flags);
 }
 
 /**
  * read_seqlock_excl() - begin a seqlock_t locking reader section
- * @sl: Pointer to seqlock_t
+ * @sl:	Pointer to seqlock_t
  *
  * read_seqlock_excl opens a seqlock_t locking reader critical section.  A
  * locking reader exclusively locks out *both* other writers *and* other

  reply	other threads:[~2020-07-29 14:33 UTC|newest]

Thread overview: 258+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-19 21:45 [PATCH v1 00/25] seqlock: Extend seqcount API with associated locks Ahmed S. Darwish
2020-05-19 21:45 ` [PATCH v1 01/25] net: core: device_rename: Use rwsem instead of a seqcount Ahmed S. Darwish
2020-05-19 22:01   ` Stephen Hemminger
2020-05-19 22:23     ` Thomas Gleixner
2020-05-19 23:11       ` Stephen Hemminger
2020-05-19 23:42         ` Thomas Gleixner
2020-05-20  0:06           ` Stephen Hemminger
2020-05-20  1:55             ` Thomas Gleixner
2020-05-20  2:57           ` David Miller
2020-05-20  3:18             ` Eric Dumazet
2020-05-20  4:36               ` Stephen Hemminger
2020-05-20 19:37             ` Thomas Gleixner
2020-05-20 21:36               ` Stephen Hemminger
2020-05-20  2:01   ` Eric Dumazet
2020-05-20  6:42     ` Ahmed S. Darwish
2020-05-20 12:51       ` Eric Dumazet
2020-06-03 14:33         ` Ahmed S. Darwish
2020-05-20 14:37   ` Dan Carpenter
2020-05-25 16:22     ` Ahmed S. Darwish
2020-05-19 21:45 ` [PATCH v1 02/25] mm/swap: Don't abuse the seqcount latching API Ahmed S. Darwish
2020-05-20 12:22   ` Konstantin Khlebnikov
2020-05-20 13:05     ` Peter Zijlstra
2020-05-22 14:57   ` Peter Zijlstra
2020-05-22 15:17     ` Sebastian A. Siewior
2020-05-22 16:23       ` Peter Zijlstra
2020-05-25 15:24     ` Ahmed S. Darwish
2020-05-25 15:45       ` Peter Zijlstra
2020-05-25 16:10     ` John Ogness
2020-09-10 15:08       ` [tip: locking/core] mm/swap: Do not abuse the seqcount_t " tip-bot2 for Ahmed S. Darwish
2020-05-19 21:45 ` [PATCH v1 03/25] net: phy: fixed_phy: Remove unused seqcount Ahmed S. Darwish
2020-05-19 21:45 ` [PATCH v1 04/25] block: nr_sects_write(): Disable preemption on seqcount write Ahmed S. Darwish
2020-05-22 16:39   ` Peter Zijlstra
2020-05-25  9:56     ` Ahmed S. Darwish
     [not found]   ` <20200522001237.A00E8206BE@mail.kernel.org>
2020-05-25 10:12     ` Ahmed S. Darwish
2020-05-19 21:45 ` [PATCH v1 05/25] u64_stats: Document writer non-preemptibility requirement Ahmed S. Darwish
2020-05-19 21:45 ` [PATCH v1 06/25] dma-buf: Remove custom seqcount lockdep class key Ahmed S. Darwish
2020-05-19 21:45 ` [PATCH v1 07/25] lockdep: Add preemption disabled assertion API Ahmed S. Darwish
2020-05-22 17:55   ` Peter Zijlstra
2020-05-23 14:59     ` Sebastian A. Siewior
2020-05-23 22:41       ` Peter Zijlstra
2020-05-24 10:50         ` Sebastian A. Siewior
2020-05-25 10:22         ` Peter Zijlstra
2020-05-26  0:52           ` Ahmed S. Darwish
2020-05-26  8:13             ` Peter Zijlstra
2020-05-26  9:45               ` Ahmed S. Darwish
2020-06-03 15:30               ` Ahmed S. Darwish
2020-05-19 21:45 ` [PATCH v1 08/25] seqlock: lockdep assert non-preemptibility on seqcount_t write Ahmed S. Darwish
2020-05-19 21:45 ` [PATCH v1 09/25] Documentation: locking: Describe seqlock design and usage Ahmed S. Darwish
2020-05-22 18:01   ` Peter Zijlstra
2020-05-22 22:24     ` Steven Rostedt
2020-05-25 10:50       ` Ahmed S. Darwish
2020-05-25 11:02         ` Ahmed S. Darwish
2020-05-19 21:45 ` [PATCH v1 10/25] seqlock: Add RST directives to kernel-doc code samples and notes Ahmed S. Darwish
2020-05-22 18:02   ` Peter Zijlstra
2020-05-22 18:03     ` Peter Zijlstra
2020-05-22 18:26       ` Thomas Gleixner
2020-05-22 18:32         ` Peter Zijlstra
2020-05-25  9:36           ` Ahmed S. Darwish
2020-05-25 13:44             ` Peter Zijlstra
2020-05-25 14:07               ` Peter Zijlstra
2020-05-19 21:45 ` [PATCH v1 11/25] seqlock: Add missing kernel-doc annotations Ahmed S. Darwish
2020-05-19 21:45 ` [PATCH v1 12/25] seqlock: Extend seqcount API with associated locks Ahmed S. Darwish
2020-05-19 21:45 ` [PATCH v1 13/25] dma-buf: Use sequence counter with associated wound/wait mutex Ahmed S. Darwish
2020-05-20 10:48   ` Christian König
2020-05-21  0:09     ` Ahmed S. Darwish
2020-05-21 13:20       ` Christian König
2020-05-19 21:45 ` [PATCH v1 14/25] sched: tasks: Use sequence counter with associated spinlock Ahmed S. Darwish
2020-05-19 21:45 ` [PATCH v1 15/25] netfilter: conntrack: " Ahmed S. Darwish
2020-05-19 21:45 ` [PATCH v1 16/25] netfilter: nft_set_rbtree: Use sequence counter with associated rwlock Ahmed S. Darwish
2020-05-19 21:45 ` [PATCH v1 17/25] xfrm: policy: Use sequence counters with associated lock Ahmed S. Darwish
2020-05-19 21:45 ` [PATCH v1 18/25] timekeeping: Use sequence counter with associated raw spinlock Ahmed S. Darwish
2020-05-19 21:45 ` [PATCH v1 19/25] vfs: Use sequence counter with associated spinlock Ahmed S. Darwish
2020-05-19 21:45 ` [PATCH v1 20/25] raid5: " Ahmed S. Darwish
2020-05-19 21:45 ` [PATCH v1 21/25] iocost: " Ahmed S. Darwish
2020-05-19 21:45 ` [PATCH v1 22/25] NFSv4: " Ahmed S. Darwish
2020-05-19 21:45 ` [PATCH v1 23/25] userfaultfd: " Ahmed S. Darwish
2020-05-19 21:45 ` [PATCH v1 24/25] kvm/eventfd: " Ahmed S. Darwish
2020-05-19 21:45 ` [PATCH v1 25/25] hrtimer: Use sequence counter with associated raw spinlock Ahmed S. Darwish
2020-06-08  0:57 ` [PATCH v2 00/18] seqlock: Extend seqcount API with associated locks Ahmed S. Darwish
2020-06-08  0:57   ` [PATCH v2 01/18] Documentation: locking: Describe seqlock design and usage Ahmed S. Darwish
2020-06-08  0:57   ` [PATCH v2 02/18] seqlock: Properly format kernel-doc code samples Ahmed S. Darwish
2020-06-08  0:57   ` [PATCH v2 03/18] seqlock: Add missing kernel-doc annotations Ahmed S. Darwish
2020-06-08  0:57   ` [PATCH v2 04/18] seqlock: Extend seqcount API with associated locks Ahmed S. Darwish
2020-06-08  0:57   ` [PATCH v2 05/18] dma-buf: Remove custom seqcount lockdep class key Ahmed S. Darwish
2020-06-08  0:57   ` [PATCH v2 06/18] dma-buf: Use sequence counter with associated wound/wait mutex Ahmed S. Darwish
2020-06-08 14:32     ` Daniel Vetter
2020-06-08  0:57   ` [PATCH v2 07/18] sched: tasks: Use sequence counter with associated spinlock Ahmed S. Darwish
2020-06-08  0:57   ` [PATCH v2 08/18] netfilter: conntrack: " Ahmed S. Darwish
2020-06-08  0:57   ` [PATCH v2 09/18] netfilter: nft_set_rbtree: Use sequence counter with associated rwlock Ahmed S. Darwish
2020-06-08  0:57   ` [PATCH v2 10/18] xfrm: policy: Use sequence counters with associated lock Ahmed S. Darwish
2020-06-08  0:57   ` [PATCH v2 11/18] timekeeping: Use sequence counter with associated raw spinlock Ahmed S. Darwish
2020-06-08  0:57   ` [PATCH v2 12/18] vfs: Use sequence counter with associated spinlock Ahmed S. Darwish
2020-06-08  0:57   ` [PATCH v2 13/18] raid5: " Ahmed S. Darwish
2020-06-08  0:57   ` [PATCH v2 14/18] iocost: " Ahmed S. Darwish
2020-06-08  0:57   ` [PATCH v2 15/18] NFSv4: " Ahmed S. Darwish
2020-06-08  0:57   ` [PATCH v2 16/18] userfaultfd: " Ahmed S. Darwish
2020-06-08  0:57   ` [PATCH v2 17/18] kvm/eventfd: " Ahmed S. Darwish
2020-06-08 12:57     ` Paolo Bonzini
2020-06-08  0:57   ` [PATCH v2 18/18] hrtimer: Use sequence counter with associated raw spinlock Ahmed S. Darwish
2020-06-30  5:44 ` [PATCH v3 00/20] seqlock: Extend seqcount API with associated locks Ahmed S. Darwish
2020-06-30  5:44   ` [PATCH v3 01/20] Documentation: locking: Describe seqlock design and usage Ahmed S. Darwish
2020-07-06 21:04     ` Peter Zijlstra
2020-07-06 21:12       ` Jonathan Corbet
2020-07-06 21:16       ` Peter Zijlstra
2020-07-07 10:12       ` Ahmed S. Darwish
2020-07-07 12:47         ` Peter Zijlstra
2020-06-30  5:44   ` [PATCH v3 02/20] seqlock: Properly format kernel-doc code samples Ahmed S. Darwish
2020-06-30  5:44   ` [PATCH v3 03/20] seqlock: Add missing kernel-doc annotations Ahmed S. Darwish
2020-06-30  5:44   ` [PATCH v3 04/20] lockdep: Add preemption enabled/disabled assertion APIs Ahmed S. Darwish
2020-07-06 20:50     ` Peter Zijlstra
2020-07-07  7:34       ` Sebastian A. Siewior
2020-06-30  5:44   ` [PATCH v3 05/20] seqlock: lockdep assert non-preemptibility on seqcount_t write Ahmed S. Darwish
2020-06-30  5:44   ` [PATCH v3 06/20] seqlock: Extend seqcount API with associated locks Ahmed S. Darwish
2020-07-06 21:21     ` Peter Zijlstra
2020-07-07  8:40       ` Ahmed S. Darwish
2020-07-07 13:04         ` Peter Zijlstra
2020-07-07 14:37           ` Peter Zijlstra
2020-07-08  9:12             ` Peter Zijlstra
2020-07-08 10:43               ` Ahmed S. Darwish
2020-07-08 10:33             ` Ahmed S. Darwish
2020-07-08 12:29               ` Peter Zijlstra
2020-07-08 14:13                 ` Peter Zijlstra
2020-07-08 14:25                   ` Peter Zijlstra
2020-07-08 15:09                 ` Ahmed S. Darwish
2020-07-08 15:35                   ` Peter Zijlstra
2020-07-08 15:58                     ` Ahmed S. Darwish
2020-07-08 16:16                       ` Peter Zijlstra
2020-07-08 16:18                       ` Peter Zijlstra
2020-07-08 16:01                     ` Peter Zijlstra
2020-06-30  5:44   ` [PATCH v3 07/20] dma-buf: Remove custom seqcount lockdep class key Ahmed S. Darwish
2020-06-30  5:44   ` [PATCH v3 08/20] dma-buf: Use sequence counter with associated wound/wait mutex Ahmed S. Darwish
2020-06-30  5:44   ` [PATCH v3 09/20] sched: tasks: Use sequence counter with associated spinlock Ahmed S. Darwish
2020-06-30  5:44   ` [PATCH v3 10/20] netfilter: conntrack: " Ahmed S. Darwish
2020-06-30  5:44   ` [PATCH v3 11/20] netfilter: nft_set_rbtree: Use sequence counter with associated rwlock Ahmed S. Darwish
2020-06-30  5:44   ` [PATCH v3 12/20] xfrm: policy: Use sequence counters with associated lock Ahmed S. Darwish
2020-06-30  5:44   ` [PATCH v3 13/20] timekeeping: Use sequence counter with associated raw spinlock Ahmed S. Darwish
2020-06-30  5:44   ` [PATCH v3 14/20] vfs: Use sequence counter with associated spinlock Ahmed S. Darwish
2020-06-30  5:44   ` [PATCH v3 15/20] raid5: " Ahmed S. Darwish
2020-06-30  5:44   ` [PATCH v3 16/20] iocost: " Ahmed S. Darwish
2020-06-30  7:11     ` Daniel Wagner
2020-06-30  5:44   ` [PATCH v3 17/20] NFSv4: " Ahmed S. Darwish
2020-06-30  5:44   ` [PATCH v3 18/20] userfaultfd: " Ahmed S. Darwish
2020-06-30  5:44   ` [PATCH v3 19/20] kvm/eventfd: " Ahmed S. Darwish
2020-06-30  5:44   ` [PATCH v3 20/20] hrtimer: Use sequence counter with associated raw spinlock Ahmed S. Darwish
2020-07-20 15:55 ` [PATCH v4 00/24] seqlock: Extend seqcount API with associated locks Ahmed S. Darwish
2020-07-20 15:55   ` [PATCH v4 01/24] Documentation: locking: Describe seqlock design and usage Ahmed S. Darwish
2020-07-21  1:35     ` Steven Rostedt
2020-07-21  1:37       ` Steven Rostedt
2020-07-21  5:34       ` Ahmed S. Darwish
2020-07-21  1:44     ` Steven Rostedt
2020-07-21  1:51       ` Steven Rostedt
2020-07-21  7:15         ` Ahmed S. Darwish
2020-07-29 14:33     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-07-20 15:55   ` [PATCH v4 02/24] seqlock: Properly format kernel-doc code samples Ahmed S. Darwish
2020-07-29 14:33     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-07-20 15:55   ` [PATCH v4 03/24] seqlock: seqcount_t latch: End read sections with read_seqcount_retry() Ahmed S. Darwish
2020-07-29 14:33     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-07-20 15:55   ` [PATCH v4 04/24] seqlock: Reorder seqcount_t and seqlock_t API definitions Ahmed S. Darwish
2020-07-29 14:33     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-07-20 15:55   ` [PATCH v4 05/24] seqlock: Add kernel-doc for seqcount_t and seqlock_t APIs Ahmed S. Darwish
2020-07-29 14:33     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-07-20 15:55   ` [PATCH v4 06/24] seqlock: Implement raw_seqcount_begin() in terms of raw_read_seqcount() Ahmed S. Darwish
2020-07-29 14:33     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-07-20 15:55   ` [PATCH v4 07/24] lockdep: Add preemption enabled/disabled assertion APIs Ahmed S. Darwish
2020-07-29 14:33     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-07-20 15:55   ` [PATCH v4 08/24] seqlock: lockdep assert non-preemptibility on seqcount_t write Ahmed S. Darwish
2020-07-29 14:33     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-08-08 23:21     ` [PATCH v4 08/24] " Guenter Roeck
2020-08-08 23:23       ` Guenter Roeck
2020-08-09 18:42       ` Ahmed S. Darwish
2020-08-10  8:59         ` Greg KH
2020-08-10  9:48           ` peterz
2020-08-10 10:03             ` Greg KH
2020-08-10  9:54           ` [PATCH] Revert "seqlock: lockdep assert non-preemptibility on seqcount_t write" Ahmed S. Darwish
2020-08-10 10:05             ` Greg KH
2020-08-10 10:35               ` Ahmed S. Darwish
2020-08-10 14:10               ` Guenter Roeck
2020-08-18 22:51                 ` Valdis Klētnieks
2020-08-19  0:56                   ` Guenter Roeck
2020-08-19  7:00                     ` Sebastian Andrzej Siewior
2020-08-19  7:34                       ` Valdis Klētnieks
2020-08-19 16:15                         ` Guenter Roeck
2020-08-10 19:55           ` [PATCH v4 08/24] seqlock: lockdep assert non-preemptibility on seqcount_t write Thomas Gleixner
2020-08-11 10:06             ` Greg KH
2020-07-20 15:55   ` [PATCH v4 09/24] seqlock: Extend seqcount API with associated locks Ahmed S. Darwish
2020-07-29 14:33     ` tip-bot2 for Ahmed S. Darwish [this message]
2020-07-20 15:55   ` [PATCH v4 10/24] seqlock: Align multi-line macros newline escapes at 72 columns Ahmed S. Darwish
2020-07-29 14:33     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-07-20 15:55   ` [PATCH v4 11/24] dma-buf: Remove custom seqcount lockdep class key Ahmed S. Darwish
2020-07-29 14:33     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-07-20 15:55   ` [PATCH v4 12/24] dma-buf: Use sequence counter with associated wound/wait mutex Ahmed S. Darwish
2020-07-29 14:33     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-07-20 15:55   ` [PATCH v4 13/24] sched: tasks: Use sequence counter with associated spinlock Ahmed S. Darwish
2020-07-29 14:33     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-07-20 15:55   ` [PATCH v4 14/24] netfilter: conntrack: " Ahmed S. Darwish
2020-07-29 14:33     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-07-20 15:55   ` [PATCH v4 15/24] netfilter: nft_set_rbtree: Use sequence counter with associated rwlock Ahmed S. Darwish
2020-07-29 14:33     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-07-20 15:55   ` [PATCH v4 16/24] xfrm: policy: Use sequence counters with associated lock Ahmed S. Darwish
2020-07-29 14:33     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-07-20 15:55   ` [PATCH v4 17/24] timekeeping: Use sequence counter with associated raw spinlock Ahmed S. Darwish
2020-07-29 14:33     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-07-20 15:55   ` [PATCH v4 18/24] vfs: Use sequence counter with associated spinlock Ahmed S. Darwish
2020-07-29 14:33     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-07-20 15:55   ` [PATCH v4 19/24] raid5: " Ahmed S. Darwish
2020-07-22  6:40     ` Song Liu
2020-07-29 14:33     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-07-20 15:55   ` [PATCH v4 20/24] iocost: " Ahmed S. Darwish
2020-07-29 14:33     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-07-20 15:55   ` [PATCH v4 21/24] NFSv4: " Ahmed S. Darwish
2020-07-29 14:33     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-07-20 15:55   ` [PATCH v4 22/24] userfaultfd: " Ahmed S. Darwish
2020-07-29 14:33     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-07-20 15:55   ` [PATCH v4 23/24] kvm/eventfd: " Ahmed S. Darwish
2020-07-29 14:33     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-07-20 15:55   ` [PATCH v4 24/24] hrtimer: Use sequence counter with associated raw spinlock Ahmed S. Darwish
2020-07-29 14:33     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-07-20 16:49   ` [PATCH v4 00/24] seqlock: Extend seqcount API with associated locks Eric Biggers
2020-07-20 17:33     ` Ahmed S. Darwish
2020-08-27 11:40 ` [PATCH v1 0/8] seqlock: Introduce seqcount_latch_t Ahmed S. Darwish
2020-08-27 11:40   ` [PATCH v1 1/8] time/sched_clock: Use raw_read_seqcount_latch() during suspend Ahmed S. Darwish
2020-08-27 11:40   ` [PATCH v1 2/8] mm/swap: Do not abuse the seqcount_t latching API Ahmed S. Darwish
2020-08-27 11:40   ` [PATCH v1 3/8] seqlock: Introduce seqcount_latch_t Ahmed S. Darwish
2020-09-10 15:08     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-08-27 11:40   ` [PATCH v1 4/8] time/sched_clock: Use seqcount_latch_t Ahmed S. Darwish
2020-09-10 15:08     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-08-27 11:40   ` [PATCH v1 5/8] timekeeping: " Ahmed S. Darwish
2020-09-10 15:08     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-08-27 11:40   ` [PATCH v1 6/8] x86/tsc: " Ahmed S. Darwish
2020-09-04  7:41     ` peterz
2020-09-04  8:03       ` peterz
2020-09-07 16:29         ` Ahmed S. Darwish
2020-09-07 17:30           ` peterz
2020-09-08  6:23             ` Ahmed S. Darwish
2020-09-10 15:08     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-08-27 11:40   ` [PATCH v1 7/8] rbtree_latch: " Ahmed S. Darwish
2020-09-10 15:08     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-08-27 11:40   ` [PATCH v1 8/8] seqlock: seqcount latch APIs: Only allow seqcount_latch_t Ahmed S. Darwish
2020-09-10 15:08     ` [tip: locking/core] " tip-bot2 for Ahmed S. Darwish
2020-08-28  1:07 ` [PATCH v1 0/5] seqlock: Introduce PREEMPT_RT support Ahmed S. Darwish
2020-08-28  1:07   ` [PATCH v1 1/5] seqlock: seqcount_LOCKTYPE_t: Standardize naming convention Ahmed S. Darwish
2020-08-28  8:18     ` peterz
2020-08-28  8:24       ` Ahmed S. Darwish
2020-08-28  1:07   ` [PATCH v1 2/5] seqlock: Use unique prefix for seqcount_t property accessors Ahmed S. Darwish
2020-08-28  8:27     ` peterz
2020-08-28  8:59       ` Ahmed S. Darwish
2020-08-28  1:07   ` [PATCH v1 3/5] seqlock: seqcount_t: Implement all read APIs as statement expressions Ahmed S. Darwish
2020-08-28  8:30     ` peterz
2020-08-28  8:37       ` Ahmed S. Darwish
2020-08-28  1:07   ` [PATCH v1 4/5] seqlock: seqcount_LOCKTYPE_t: Introduce PREEMPT_RT support Ahmed S. Darwish
2020-08-28  8:57     ` peterz
2020-08-28  8:59     ` peterz
2020-08-28  9:31       ` Ahmed S. Darwish
2020-08-28 14:36         ` Ahmed S. Darwish
2020-08-28  1:07   ` [PATCH v1 5/5] seqlock: PREEMPT_RT: Do not starve seqlock_t writers Ahmed S. Darwish
2020-09-04  6:52   ` [PATCH v1 0/5] seqlock: Introduce PREEMPT_RT support peterz
2020-09-04  7:30     ` Ahmed S. Darwish
2020-09-10 15:08 ` [tip: locking/core] seqlock: seqcount_LOCKNAME_t: " tip-bot2 for Ahmed S. Darwish

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=159603321724.4006.9392358919253025015.tip-bot2@tip-bot2 \
    --to=tip-bot2@linutronix.de \
    --cc=a.darwish@linutronix.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tip-commits@vger.kernel.org \
    --cc=peterz@infradead.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).