From: Rakesh Pillai <pillair@codeaurora.org>
To: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
kvalo@codeaurora.org, davem@davemloft.net, kuba@kernel.org,
netdev@vger.kernel.org, Rakesh Pillai <pillair@codeaurora.org>
Subject: [PATCH v2 3/3] ath10k: Add debugfs support to enable event history
Date: Fri, 31 Jul 2020 23:57:22 +0530 [thread overview]
Message-ID: <1596220042-2778-4-git-send-email-pillair@codeaurora.org> (raw)
In-Reply-To: <1596220042-2778-1-git-send-email-pillair@codeaurora.org>
Add the support to enable/disable the recording of
debug events history.
The enable/disable of the history from debugfs will
not make any affect if its not enabled via module
parameter.
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
---
drivers/net/wireless/ath/ath10k/debug.c | 56 +++++++++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c
index 5d08652..6785fae 100644
--- a/drivers/net/wireless/ath/ath10k/debug.c
+++ b/drivers/net/wireless/ath/ath10k/debug.c
@@ -610,6 +610,59 @@ static const struct file_operations fops_simulate_fw_crash = {
.llseek = default_llseek,
};
+static ssize_t ath10k_read_history_enable(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ const char buf[] =
+ "To enable recording of certain event history, write to this file with the enable mask\n"
+ "BIT(0): Enable Reg Access history\n"
+ " - Register write events\n"
+ " - Register read events\n"
+ "BIT(1): Enable CE events history\n"
+ " - ATH10K_IRQ_TRIGGER event\n"
+ " - ATH10K_NAPI_POLL event\n"
+ " - ATH10K_CE_SERVICE event\n"
+ " - ATH10K_NAPI_COMPLETE event\n"
+ " - ATH10K_NAPI_RESCHED event\n"
+ " - ATH10K_IRQ_SUMMARY event\n"
+ "BIT(2): Enable WMI CMD history\n"
+ " - WMI CMD event\n"
+ " - WMI CMD TX completion event\n"
+ "BIT(3): Enable WMI events history\n"
+ " - WMI Events event\n";
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, strlen(buf));
+}
+
+static ssize_t ath10k_write_history_enable(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ u32 history_enable_mask;
+ int i, ret;
+
+ ret = kstrtou32_from_user(user_buf, count, 0, &history_enable_mask);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < ATH10K_HISTORY_MAX; i++)
+ if (history_enable_mask & BIT(i))
+ set_bit(i, &ath10k_history_enable_mask);
+ else
+ clear_bit(i, &ath10k_history_enable_mask);
+
+ return count;
+}
+
+static const struct file_operations fops_history_enable = {
+ .read = ath10k_read_history_enable,
+ .write = ath10k_write_history_enable,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
static ssize_t ath10k_read_chip_id(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
@@ -2658,6 +2711,9 @@ int ath10k_debug_register(struct ath10k *ar)
debugfs_create_file("reset_htt_stats", 0200, ar->debug.debugfs_phy, ar,
&fops_reset_htt_stats);
+ debugfs_create_file("history_enable", 0644, ar->debug.debugfs_phy, ar,
+ &fops_history_enable);
+
return 0;
}
--
2.7.4
next prev parent reply other threads:[~2020-07-31 18:28 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-31 18:27 [PATCH v2 0/3] Rakesh Pillai
2020-07-31 18:27 ` [PATCH v2 1/3] ath10k: Add history for tracking certain events Rakesh Pillai
2020-07-31 18:38 ` Ben Greear
2020-08-01 5:13 ` Rakesh Pillai
2020-07-31 18:27 ` [PATCH v2 2/3] ath10k: Add module param to enable history Rakesh Pillai
2020-07-31 18:27 ` Rakesh Pillai [this message]
2020-07-31 18:46 ` [PATCH v2 0/3] Florian Fainelli
2020-08-01 5:10 ` Rakesh Pillai
2020-08-01 5:24 ` Florian Fainelli
2020-07-31 20:31 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1596220042-2778-4-git-send-email-pillair@codeaurora.org \
--to=pillair@codeaurora.org \
--cc=ath10k@lists.infradead.org \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=kvalo@codeaurora.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).