[PATCH V3 1/5] dt-bindings: clock: Update i.MX28 example

[PATCH V3 1/5] dt-bindings: clock: Update i.MX28 example

[Anson Huang]

Update the i.MX28 clock example to align with MXS AUART binding doc to
avoid below build error:

Documentation/devicetree/bindings/clock/imx28-clock.example.dt.yaml:
  serial@8006a000: clocks: [[4294967295, 45]] is too short
Documentation/devicetree/bindings/clock/imx28-clock.example.dt.yaml:
  serial@8006a000: compatible: Additional items are not allowed
  ('fsl,imx23-auart' was unexpected)
Documentation/devicetree/bindings/clock/imx28-clock.example.dt.yaml:
  serial@8006a000: compatible: ['fsl,imx28-auart', 'fsl,imx23-auart']
  is too long
Documentation/devicetree/bindings/clock/imx28-clock.example.dt.yaml:
  serial@8006a000: 'dmas' is a required property
Documentation/devicetree/bindings/clock/imx28-clock.example.dt.yaml:
  serial@8006a000: 'dma-names' is a required property

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
no change.
---
 Documentation/devicetree/bindings/clock/imx28-clock.yaml | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.yaml b/Documentation/devicetree/bindings/clock/imx28-clock.yaml
index 72328d5..671b279 100644
--- a/Documentation/devicetree/bindings/clock/imx28-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx28-clock.yaml
@@ -108,8 +108,10 @@ examples:
     };
 
     serial@8006a000 {
-        compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+        compatible = "fsl,imx28-auart";
         reg = <0x8006a000 0x2000>;
-        interrupts = <112 70 71>;
+        interrupts = <112>;
+        dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+        dma-names = "rx", "tx";
         clocks = <&clks 45>;
     };
-- 
2.7.4

[PATCH V3 2/5] dt-bindings: clock: Update i.MX23 example

[Anson Huang]

Update the i.MX23 clock example to align with MXS AUART binding doc to
avoid below build error:

Documentation/devicetree/bindings/clock/imx23-clock.example.dt.yaml:
   serial@8006c000: clocks: [[4294967295, 32]] is too short
Documentation/devicetree/bindings/clock/imx23-clock.example.dt.yaml:
   serial@8006c000: 'dmas' is a required property
Documentation/devicetree/bindings/clock/imx23-clock.example.dt.yaml:
    serial@8006c000: 'dma-names' is a required property

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
no change.
---
 Documentation/devicetree/bindings/clock/imx23-clock.yaml | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.yaml b/Documentation/devicetree/bindings/clock/imx23-clock.yaml
index 66cb238..4028c1f 100644
--- a/Documentation/devicetree/bindings/clock/imx23-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx23-clock.yaml
@@ -87,6 +87,8 @@ examples:
     serial@8006c000 {
         compatible = "fsl,imx23-auart";
         reg = <0x8006c000 0x2000>;
-        interrupts = <24 25 23>;
+        interrupts = <24>;
         clocks = <&clks 32>;
+        dmas = <&dma_apbx 6>, <&dma_apbx 7>;
+        dma-names = "rx", "tx";
     };
-- 
2.7.4

[PATCH V3 3/5] dt-bindings: serial: Convert i.MX uart to json-schema

[Anson Huang]

Convert the i.MX uart binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
no change.
---
 .../devicetree/bindings/serial/fsl-imx-uart.txt    | 40 ----------
 .../devicetree/bindings/serial/fsl-imx-uart.yaml   | 92 ++++++++++++++++++++++
 2 files changed, 92 insertions(+), 40 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
 create mode 100644 Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml

diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
deleted file mode 100644
index 9582fc2..0000000
--- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-* Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART)
-
-Required properties:
-- compatible : Should be "fsl,<soc>-uart"
-- reg : Address and length of the register set for the device
-- interrupts : Should contain uart interrupt
-
-Optional properties:
-- fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
-                  in DCE mode by default.
-- fsl,inverted-tx , fsl,inverted-rx : Indicate that the hardware attached
-  to the peripheral inverts the signal transmitted or received,
-  respectively, and that the peripheral should invert its output/input
-  using the INVT/INVR registers.
-- rs485-rts-delay, rs485-rts-active-low, rs485-rx-during-tx,
-  linux,rs485-enabled-at-boot-time: see rs485.txt. Note that for RS485
-  you must enable either the "uart-has-rtscts" or the "rts-gpios"
-  properties. In case you use "uart-has-rtscts" the signal that controls
-  the transceiver is actually CTS_B, not RTS_B. CTS_B is always output,
-  and RTS_B is input, regardless of dte-mode.
-
-Please check Documentation/devicetree/bindings/serial/serial.yaml
-for the complete list of generic properties.
-
-Note: Each uart controller should have an alias correctly numbered
-in "aliases" node.
-
-Example:
-
-aliases {
-	serial0 = &uart1;
-};
-
-uart1: serial@73fbc000 {
-	compatible = "fsl,imx51-uart", "fsl,imx21-uart";
-	reg = <0x73fbc000 0x4000>;
-	interrupts = <31>;
-	uart-has-rtscts;
-	fsl,dte-mode;
-};
diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
new file mode 100644
index 0000000..cba3f83
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/fsl-imx-uart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART)
+
+maintainers:
+  - Fabio Estevam <fabio.estevam@nxp.com>
+
+allOf:
+  - $ref: "serial.yaml"
+  - $ref: "rs485.yaml"
+
+properties:
+  compatible:
+    oneOf:
+      - const: fsl,imx1-uart
+      - const: fsl,imx21-uart
+      - const: fsl,imx53-uart
+      - const: fsl,imx6q-uart
+      - items:
+          - enum:
+            - fsl,imx25-uart
+            - fsl,imx27-uart
+            - fsl,imx31-uart
+            - fsl,imx35-uart
+            - fsl,imx50-uart
+            - fsl,imx51-uart
+          - const: fsl,imx21-uart
+      - items:
+          - enum:
+            - fsl,imx6sl-uart
+            - fsl,imx6sll-uart
+            - fsl,imx6sx-uart
+            - fsl,imx6ul-uart
+            - fsl,imx7d-uart
+          - const: fsl,imx6q-uart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  fsl,dte-mode:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Indicate the uart works in DTE mode. The uart works in DCE mode by default.
+
+  fsl,inverted-tx:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Indicate that the hardware attached to the peripheral inverts the signal
+      transmitted, and that the peripheral should invert its output using the
+      INVT registers.
+
+  fsl,inverted-rx:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: |
+      Indicate that the hardware attached to the peripheral inverts the signal
+      received, and that the peripheral should invert its input using the
+      INVR registers.
+
+  uart-has-rtscts: true
+
+  rs485-rts-delay: true
+  rs485-rts-active-low: true
+  rs485-rx-during-tx: true
+  linux,rs485-enabled-at-boot-time: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    aliases {
+        serial0 = &uart1;
+    };
+
+    uart1: serial@73fbc000 {
+        compatible = "fsl,imx51-uart", "fsl,imx21-uart";
+        reg = <0x73fbc000 0x4000>;
+        interrupts = <31>;
+        uart-has-rtscts;
+        fsl,dte-mode;
+    };
-- 
2.7.4

[PATCH V3 4/5] dt-bindings: serial: Convert MXS auart to json-schema

[Anson Huang]

Convert the MXS auart binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
changes since V2:
	- update maintainer.
---
 .../devicetree/bindings/serial/fsl-mxs-auart.txt   | 53 -------------
 .../devicetree/bindings/serial/fsl-mxs-auart.yaml  | 91 ++++++++++++++++++++++
 2 files changed, 91 insertions(+), 53 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt
 create mode 100644 Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml

diff --git a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt
deleted file mode 100644
index 5c96d41..0000000
--- a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Freescale MXS Application UART (AUART)
-
-Required properties for all SoCs:
-- compatible : Should be one of fallowing variants:
-	"fsl,imx23-auart" - Freescale i.MX23
-	"fsl,imx28-auart" - Freescale i.MX28
-	"alphascale,asm9260-auart" - Alphascale ASM9260
-- reg : Address and length of the register set for the device
-- interrupts : Should contain the auart interrupt numbers
-- dmas: DMA specifier, consisting of a phandle to DMA controller node
-  and AUART DMA channel ID.
-  Refer to dma.txt and fsl-mxs-dma.txt for details.
-- dma-names: "rx" for RX channel, "tx" for TX channel.
-
-Required properties for "alphascale,asm9260-auart":
-- clocks : the clocks feeding the watchdog timer. See clock-bindings.txt
-- clock-names : should be set to
-	"mod" - source for tick counter.
-	"ahb" - ahb gate.
-
-Optional properties:
-- uart-has-rtscts : Indicate the UART has RTS and CTS lines
-  for hardware flow control,
-	it also means you enable the DMA support for this UART.
-- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
-  line respectively. It will use specified PIO instead of the peripheral
-  function pin for the USART feature.
-  If unsure, don't specify this property.
-
-Example:
-auart0: serial@8006a000 {
-	compatible = "fsl,imx28-auart", "fsl,imx23-auart";
-	reg = <0x8006a000 0x2000>;
-	interrupts = <112>;
-	dmas = <&dma_apbx 8>, <&dma_apbx 9>;
-	dma-names = "rx", "tx";
-	cts-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-	dsr-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-	dcd-gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-};
-
-Note: Each auart port should have an alias correctly numbered in "aliases"
-node.
-
-Example:
-
-aliases {
-	serial0 = &auart0;
-	serial1 = &auart1;
-	serial2 = &auart2;
-	serial3 = &auart3;
-	serial4 = &auart4;
-};
diff --git a/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
new file mode 100644
index 0000000..ce1d894
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/fsl-mxs-auart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale MXS Application UART (AUART)
+
+maintainers:
+  - Fabio Estevam <fabio.estevam@nxp.com>
+
+allOf:
+  - $ref: "serial.yaml"
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx23-auart
+      - fsl,imx28-auart
+      - alphascale,asm9260-auart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  clocks:
+    items:
+      - description: mod clock
+      - description: ahb clock
+    minItems: 1
+
+  clock-names:
+    items:
+      - const: mod
+      - const: ahb
+    minItems: 1
+
+  uart-has-rtscts: true
+  rts-gpios: true
+  cts-gpios: true
+  dtr-gpios: true
+  dsr-gpios: true
+  rng-gpios: true
+  dcd-gpios: true
+
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - alphascale,asm9260-auart
+then:
+  required:
+    - clocks
+    - clock-names
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - dmas
+  - dma-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    aliases {
+        serial0 = &auart0;
+    };
+
+    auart0: serial@8006a000 {
+        compatible = "fsl,imx28-auart";
+        reg = <0x8006a000 0x2000>;
+        interrupts = <112>;
+        dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+        dma-names = "rx", "tx";
+        clocks = <&clks 45>;
+    };
-- 
2.7.4

[PATCH V3 5/5] dt-bindings: serial: Convert NXP lpuart to json-schema

[Anson Huang]

Convert the NXP lpuart binding to DT schema format using json-schema.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
changes since V2:
	- update maintainer, the original owner's email address is no longer valid,
	  use one of the patch contributors as well as NXP's UART owner as maintainer.
---
 .../devicetree/bindings/serial/fsl-lpuart.txt      | 43 ------------
 .../devicetree/bindings/serial/fsl-lpuart.yaml     | 79 ++++++++++++++++++++++
 2 files changed, 79 insertions(+), 43 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/serial/fsl-lpuart.txt
 create mode 100644 Documentation/devicetree/bindings/serial/fsl-lpuart.yaml

diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
deleted file mode 100644
index e7448b9..0000000
--- a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-* Freescale low power universal asynchronous receiver/transmitter (lpuart)
-
-Required properties:
-- compatible :
-  - "fsl,vf610-lpuart" for lpuart compatible with the one integrated
-    on Vybrid vf610 SoC with 8-bit register organization
-  - "fsl,ls1021a-lpuart" for lpuart compatible with the one integrated
-    on LS1021A SoC with 32-bit big-endian register organization
-  - "fsl,ls1028a-lpuart" for lpuart compatible with the one integrated
-    on LS1028A SoC with 32-bit little-endian register organization
-  - "fsl,imx7ulp-lpuart" for lpuart compatible with the one integrated
-    on i.MX7ULP SoC with 32-bit little-endian register organization
-  - "fsl,imx8qxp-lpuart" for lpuart compatible with the one integrated
-    on i.MX8QXP SoC with 32-bit little-endian register organization
-  - "fsl,imx8qm-lpuart" for lpuart compatible with the one integrated
-    on i.MX8QM SoC with 32-bit little-endian register organization
-- reg : Address and length of the register set for the device
-- interrupts : Should contain uart interrupt
-- clocks : phandle + clock specifier pairs, one for each entry in clock-names
-- clock-names : For vf610/ls1021a/ls1028a/imx7ulp, "ipg" clock is for uart
-  bus/baud clock. For imx8qxp lpuart, "ipg" clock is bus clock that is used
-  to access lpuart controller registers, it also requires "baud" clock for
-  module to receive/transmit data.
-
-Optional properties:
-- dmas: A list of two dma specifiers, one for each entry in dma-names.
-- dma-names: should contain "tx" and "rx".
-- rs485-rts-active-low, linux,rs485-enabled-at-boot-time: see rs485.txt
-
-Note: Optional properties for DMA support. Write them both or both not.
-
-Example:
-
-uart0: serial@40027000 {
-		compatible = "fsl,vf610-lpuart";
-		reg = <0x40027000 0x1000>;
-		interrupts = <0 61 0x00>;
-		clocks = <&clks VF610_CLK_UART0>;
-		clock-names = "ipg";
-		dmas = <&edma0 0 2>,
-			<&edma0 0 3>;
-		dma-names = "rx","tx";
-	};
diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
new file mode 100644
index 0000000..e82c2cf
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale low power universal asynchronous receiver/transmitter (lpuart)
+
+maintainers:
+  - Fugang Duan <fugang.duan@nxp.com>
+
+allOf:
+  - $ref: "rs485.yaml"
+
+properties:
+  compatible:
+    enum:
+      - fsl,vf610-lpuart
+      - fsl,ls1021a-lpuart
+      - fsl,ls1028a-lpuart
+      - fsl,imx7ulp-lpuart
+      - fsl,imx8qxp-lpuart
+      - fsl,imx8qm-lpuart
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: ipg clock
+      - description: baud clock
+    minItems: 1
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: ipg
+      - const: baud
+    minItems: 1
+    maxItems: 2
+
+  dmas:
+    items:
+      - description: DMA controller phandle and request line for RX
+      - description: DMA controller phandle and request line for TX
+
+  dma-names:
+    items:
+      - const: rx
+      - const: tx
+
+  rs485-rts-active-low: true
+  linux,rs485-enabled-at-boot-time: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/vf610-clock.h>
+
+    serial@40027000 {
+        compatible = "fsl,vf610-lpuart";
+        reg = <0x40027000 0x1000>;
+        interrupts = <0 61 0x00>;
+        clocks = <&clks VF610_CLK_UART0>;
+        clock-names = "ipg";
+        dmas = <&edma0 0 2>, <&edma0 0 3>;
+        dma-names = "rx","tx";
+    };
-- 
2.7.4

Re: [PATCH V3 1/5] dt-bindings: clock: Update i.MX28 example

[Rob Herring]

On Tue, 18 Aug 2020 11:34:41 +0800, Anson Huang wrote:
> Update the i.MX28 clock example to align with MXS AUART binding doc to
> avoid below build error:
> 
> Documentation/devicetree/bindings/clock/imx28-clock.example.dt.yaml:
>   serial@8006a000: clocks: [[4294967295, 45]] is too short
> Documentation/devicetree/bindings/clock/imx28-clock.example.dt.yaml:
>   serial@8006a000: compatible: Additional items are not allowed
>   ('fsl,imx23-auart' was unexpected)
> Documentation/devicetree/bindings/clock/imx28-clock.example.dt.yaml:
>   serial@8006a000: compatible: ['fsl,imx28-auart', 'fsl,imx23-auart']
>   is too long
> Documentation/devicetree/bindings/clock/imx28-clock.example.dt.yaml:
>   serial@8006a000: 'dmas' is a required property
> Documentation/devicetree/bindings/clock/imx28-clock.example.dt.yaml:
>   serial@8006a000: 'dma-names' is a required property
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> no change.
> ---
>  Documentation/devicetree/bindings/clock/imx28-clock.yaml | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 

Applied, thanks!

Re: [PATCH V3 2/5] dt-bindings: clock: Update i.MX23 example

[Rob Herring]

On Tue, 18 Aug 2020 11:34:42 +0800, Anson Huang wrote:
> Update the i.MX23 clock example to align with MXS AUART binding doc to
> avoid below build error:
> 
> Documentation/devicetree/bindings/clock/imx23-clock.example.dt.yaml:
>    serial@8006c000: clocks: [[4294967295, 32]] is too short
> Documentation/devicetree/bindings/clock/imx23-clock.example.dt.yaml:
>    serial@8006c000: 'dmas' is a required property
> Documentation/devicetree/bindings/clock/imx23-clock.example.dt.yaml:
>     serial@8006c000: 'dma-names' is a required property
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> no change.
> ---
>  Documentation/devicetree/bindings/clock/imx23-clock.yaml | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 

Applied, thanks!

Re: [PATCH V3 3/5] dt-bindings: serial: Convert i.MX uart to json-schema

[Rob Herring]

On Tue, 18 Aug 2020 11:34:43 +0800, Anson Huang wrote:
> Convert the i.MX uart binding to DT schema format using json-schema.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> no change.
> ---
>  .../devicetree/bindings/serial/fsl-imx-uart.txt    | 40 ----------
>  .../devicetree/bindings/serial/fsl-imx-uart.yaml   | 92 ++++++++++++++++++++++
>  2 files changed, 92 insertions(+), 40 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
>  create mode 100644 Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml
> 

Applied, thanks!

Re: [PATCH V3 4/5] dt-bindings: serial: Convert MXS auart to json-schema

[Rob Herring]

On Tue, 18 Aug 2020 11:34:44 +0800, Anson Huang wrote:
> Convert the MXS auart binding to DT schema format using json-schema.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> changes since V2:
> 	- update maintainer.
> ---
>  .../devicetree/bindings/serial/fsl-mxs-auart.txt   | 53 -------------
>  .../devicetree/bindings/serial/fsl-mxs-auart.yaml  | 91 ++++++++++++++++++++++
>  2 files changed, 91 insertions(+), 53 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/serial/fsl-mxs-auart.txt
>  create mode 100644 Documentation/devicetree/bindings/serial/fsl-mxs-auart.yaml
> 

Applied, thanks!

Re: [PATCH V3 5/5] dt-bindings: serial: Convert NXP lpuart to json-schema

[Rob Herring]

On Tue, 18 Aug 2020 11:34:45 +0800, Anson Huang wrote:
> Convert the NXP lpuart binding to DT schema format using json-schema.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> changes since V2:
> 	- update maintainer, the original owner's email address is no longer valid,
> 	  use one of the patch contributors as well as NXP's UART owner as maintainer.
> ---
>  .../devicetree/bindings/serial/fsl-lpuart.txt      | 43 ------------
>  .../devicetree/bindings/serial/fsl-lpuart.yaml     | 79 ++++++++++++++++++++++
>  2 files changed, 79 insertions(+), 43 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/serial/fsl-lpuart.txt
>  create mode 100644 Documentation/devicetree/bindings/serial/fsl-lpuart.yaml
> 

Applied, thanks!