linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Luo Jiaxing <luojiaxing@huawei.com>
To: <peppe.cavallaro@st.com>, <alexandre.torgue@st.com>,
	<joabreu@synopsys.com>, <davem@davemloft.net>, <kuba@kernel.org>,
	<mcoquelin.stm32@gmail.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linuxarm@huawei.com>
Subject: [PATCH net-next] net: stmmac: set get_rx_header_len() as void for it didn't have any error code to return
Date: Fri, 11 Sep 2020 11:55:58 +0800	[thread overview]
Message-ID: <1599796558-45818-1-git-send-email-luojiaxing@huawei.com> (raw)

We found the following warning when using W=1 to build kernel:

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:3634:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]
int ret, coe = priv->hw->rx_csum;

When digging stmmac_get_rx_header_len(), dwmac4_get_rx_header_len() and
dwxgmac2_get_rx_header_len() return 0 only, without any error code to
report. Therefore, it's better to define get_rx_header_len() as void.

Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c   | 3 +--
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c | 3 +--
 drivers/net/ethernet/stmicro/stmmac/hwif.h           | 4 ++--
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c    | 4 ++--
 4 files changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
index eff8206..c6540b0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_descs.c
@@ -494,10 +494,9 @@ static void dwmac4_set_vlan(struct dma_desc *p, u32 type)
 	p->des2 |= cpu_to_le32(type & TDES2_VLAN_TAG_MASK);
 }
 
-static int dwmac4_get_rx_header_len(struct dma_desc *p, unsigned int *len)
+static void dwmac4_get_rx_header_len(struct dma_desc *p, unsigned int *len)
 {
 	*len = le32_to_cpu(p->des2) & RDES2_HL;
-	return 0;
 }
 
 static void dwmac4_set_sec_addr(struct dma_desc *p, dma_addr_t addr)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c
index c3d654c..0aaf19a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_descs.c
@@ -286,11 +286,10 @@ static int dwxgmac2_get_rx_hash(struct dma_desc *p, u32 *hash,
 	return -EINVAL;
 }
 
-static int dwxgmac2_get_rx_header_len(struct dma_desc *p, unsigned int *len)
+static void dwxgmac2_get_rx_header_len(struct dma_desc *p, unsigned int *len)
 {
 	if (le32_to_cpu(p->des3) & XGMAC_RDES3_L34T)
 		*len = le32_to_cpu(p->des2) & XGMAC_RDES2_HL;
-	return 0;
 }
 
 static void dwxgmac2_set_sec_addr(struct dma_desc *p, dma_addr_t addr)
diff --git a/drivers/net/ethernet/stmicro/stmmac/hwif.h b/drivers/net/ethernet/stmicro/stmmac/hwif.h
index ffe2d63..e2dca9b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/hwif.h
+++ b/drivers/net/ethernet/stmicro/stmmac/hwif.h
@@ -90,7 +90,7 @@ struct stmmac_desc_ops {
 	/* RSS */
 	int (*get_rx_hash)(struct dma_desc *p, u32 *hash,
 			   enum pkt_hash_types *type);
-	int (*get_rx_header_len)(struct dma_desc *p, unsigned int *len);
+	void (*get_rx_header_len)(struct dma_desc *p, unsigned int *len);
 	void (*set_sec_addr)(struct dma_desc *p, dma_addr_t addr);
 	void (*set_sarc)(struct dma_desc *p, u32 sarc_type);
 	void (*set_vlan_tag)(struct dma_desc *p, u16 tag, u16 inner_tag,
@@ -150,7 +150,7 @@ struct stmmac_desc_ops {
 #define stmmac_get_rx_hash(__priv, __args...) \
 	stmmac_do_callback(__priv, desc, get_rx_hash, __args)
 #define stmmac_get_rx_header_len(__priv, __args...) \
-	stmmac_do_callback(__priv, desc, get_rx_header_len, __args)
+	stmmac_do_void_callback(__priv, desc, get_rx_header_len, __args)
 #define stmmac_set_desc_sec_addr(__priv, __args...) \
 	stmmac_do_void_callback(__priv, desc, set_sec_addr, __args)
 #define stmmac_set_desc_sarc(__priv, __args...) \
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 89b2b34..7e95412 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -3631,15 +3631,15 @@ static unsigned int stmmac_rx_buf1_len(struct stmmac_priv *priv,
 				       struct dma_desc *p,
 				       int status, unsigned int len)
 {
-	int ret, coe = priv->hw->rx_csum;
 	unsigned int plen = 0, hlen = 0;
+	int coe = priv->hw->rx_csum;
 
 	/* Not first descriptor, buffer is always zero */
 	if (priv->sph && len)
 		return 0;
 
 	/* First descriptor, get split header length */
-	ret = stmmac_get_rx_header_len(priv, p, &hlen);
+	stmmac_get_rx_header_len(priv, p, &hlen);
 	if (priv->sph && hlen) {
 		priv->xstats.rx_split_hdr_pkt_n++;
 		return hlen;
-- 
2.7.4


             reply	other threads:[~2020-09-11  3:58 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-11  3:55 Luo Jiaxing [this message]
2020-09-11 15:38 ` [PATCH net-next] net: stmmac: set get_rx_header_len() as void for it didn't have any error code to return Jakub Kicinski
2020-09-11 21:37 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1599796558-45818-1-git-send-email-luojiaxing@huawei.com \
    --to=luojiaxing@huawei.com \
    --cc=alexandre.torgue@st.com \
    --cc=davem@davemloft.net \
    --cc=joabreu@synopsys.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).