linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jacob Pan <jacob.pan.linux@gmail.com>
To: iommu@lists.linux-foundation.org,
	LKML <linux-kernel@vger.kernel.org>,
	Joerg Roedel <joro@8bytes.org>,
	Alex Williamson <alex.williamson@redhat.com>,
	"Lu Baolu" <baolu.lu@linux.intel.com>,
	David Woodhouse <dwmw2@infradead.org>,
	Jonathan Corbet <corbet@lwn.net>
Cc: linux-api@vger.kernel.org,
	Jean-Philippe Brucker <jean-philippe@linaro.com>,
	Eric Auger <eric.auger@redhat.com>,
	Jacob Pan <jacob.jun.pan@linux.intel.com>,
	Yi Liu <yi.l.liu@intel.com>, "Tian, Kevin" <kevin.tian@intel.com>,
	Raj Ashok <ashok.raj@intel.com>, Wu Hao <hao.wu@intel.com>,
	Yi Sun <yi.y.sun@intel.com>, Randy Dunlap <rdunlap@infradead.org>
Subject: [PATCH v12 3/6] iommu/uapi: Use named union for user data
Date: Fri, 25 Sep 2020 09:32:44 -0700	[thread overview]
Message-ID: <1601051567-54787-4-git-send-email-jacob.jun.pan@linux.intel.com> (raw)
In-Reply-To: <1601051567-54787-1-git-send-email-jacob.jun.pan@linux.intel.com>

IOMMU UAPI data size is filled by the user space which must be validated
by the kernel. To ensure backward compatibility, user data can only be
extended by either re-purpose padding bytes or extend the variable sized
union at the end. No size change is allowed before the union. Therefore,
the minimum size is the offset of the union.

To use offsetof() on the union, we must make it named.

Link: https://lore.kernel.org/linux-iommu/20200611145518.0c2817d6@x1.home/
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
---
 drivers/iommu/intel/iommu.c | 22 +++++++++++-----------
 drivers/iommu/intel/svm.c   |  2 +-
 include/uapi/linux/iommu.h  |  4 ++--
 3 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 87b17bac04c2..461f3a6864d4 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -5434,8 +5434,8 @@ intel_iommu_sva_invalidate(struct iommu_domain *domain, struct device *dev,
 
 	/* Size is only valid in address selective invalidation */
 	if (inv_info->granularity == IOMMU_INV_GRANU_ADDR)
-		size = to_vtd_size(inv_info->addr_info.granule_size,
-				   inv_info->addr_info.nb_granules);
+		size = to_vtd_size(inv_info->granu.addr_info.granule_size,
+				   inv_info->granu.addr_info.nb_granules);
 
 	for_each_set_bit(cache_type,
 			 (unsigned long *)&inv_info->cache,
@@ -5456,20 +5456,20 @@ intel_iommu_sva_invalidate(struct iommu_domain *domain, struct device *dev,
 		 * granularity.
 		 */
 		if (inv_info->granularity == IOMMU_INV_GRANU_PASID &&
-		    (inv_info->pasid_info.flags & IOMMU_INV_PASID_FLAGS_PASID))
-			pasid = inv_info->pasid_info.pasid;
+		    (inv_info->granu.pasid_info.flags & IOMMU_INV_PASID_FLAGS_PASID))
+			pasid = inv_info->granu.pasid_info.pasid;
 		else if (inv_info->granularity == IOMMU_INV_GRANU_ADDR &&
-			 (inv_info->addr_info.flags & IOMMU_INV_ADDR_FLAGS_PASID))
-			pasid = inv_info->addr_info.pasid;
+			 (inv_info->granu.addr_info.flags & IOMMU_INV_ADDR_FLAGS_PASID))
+			pasid = inv_info->granu.addr_info.pasid;
 
 		switch (BIT(cache_type)) {
 		case IOMMU_CACHE_INV_TYPE_IOTLB:
 			/* HW will ignore LSB bits based on address mask */
 			if (inv_info->granularity == IOMMU_INV_GRANU_ADDR &&
 			    size &&
-			    (inv_info->addr_info.addr & ((BIT(VTD_PAGE_SHIFT + size)) - 1))) {
+			    (inv_info->granu.addr_info.addr & ((BIT(VTD_PAGE_SHIFT + size)) - 1))) {
 				pr_err_ratelimited("User address not aligned, 0x%llx, size order %llu\n",
-						   inv_info->addr_info.addr, size);
+						   inv_info->granu.addr_info.addr, size);
 			}
 
 			/*
@@ -5477,9 +5477,9 @@ intel_iommu_sva_invalidate(struct iommu_domain *domain, struct device *dev,
 			 * We use npages = -1 to indicate that.
 			 */
 			qi_flush_piotlb(iommu, did, pasid,
-					mm_to_dma_pfn(inv_info->addr_info.addr),
+					mm_to_dma_pfn(inv_info->granu.addr_info.addr),
 					(granu == QI_GRAN_NONG_PASID) ? -1 : 1 << size,
-					inv_info->addr_info.flags & IOMMU_INV_ADDR_FLAGS_LEAF);
+					inv_info->granu.addr_info.flags & IOMMU_INV_ADDR_FLAGS_LEAF);
 
 			if (!info->ats_enabled)
 				break;
@@ -5502,7 +5502,7 @@ intel_iommu_sva_invalidate(struct iommu_domain *domain, struct device *dev,
 				size = 64 - VTD_PAGE_SHIFT;
 				addr = 0;
 			} else if (inv_info->granularity == IOMMU_INV_GRANU_ADDR) {
-				addr = inv_info->addr_info.addr;
+				addr = inv_info->granu.addr_info.addr;
 			}
 
 			if (info->ats_enabled)
diff --git a/drivers/iommu/intel/svm.c b/drivers/iommu/intel/svm.c
index 95c3164a2302..99353d6468fa 100644
--- a/drivers/iommu/intel/svm.c
+++ b/drivers/iommu/intel/svm.c
@@ -370,7 +370,7 @@ int intel_svm_bind_gpasid(struct iommu_domain *domain, struct device *dev,
 	spin_lock(&iommu->lock);
 	ret = intel_pasid_setup_nested(iommu, dev,
 				       (pgd_t *)(uintptr_t)data->gpgd,
-				       data->hpasid, &data->vtd, dmar_domain,
+				       data->hpasid, &data->vendor.vtd, dmar_domain,
 				       data->addr_width);
 	spin_unlock(&iommu->lock);
 	if (ret) {
diff --git a/include/uapi/linux/iommu.h b/include/uapi/linux/iommu.h
index b42acc8fe007..5946779ac1f9 100644
--- a/include/uapi/linux/iommu.h
+++ b/include/uapi/linux/iommu.h
@@ -267,7 +267,7 @@ struct iommu_cache_invalidate_info {
 	union {
 		struct iommu_inv_pasid_info pasid_info;
 		struct iommu_inv_addr_info addr_info;
-	};
+	} granu;
 };
 
 /**
@@ -333,7 +333,7 @@ struct iommu_gpasid_bind_data {
 	/* Vendor specific data */
 	union {
 		struct iommu_gpasid_bind_data_vtd vtd;
-	};
+	} vendor;
 };
 
 #endif /* _UAPI_IOMMU_H */
-- 
2.7.4


  parent reply	other threads:[~2020-09-25 16:31 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-25 16:32 [PATCH v12 0/6] IOMMU user API enhancement Jacob Pan
2020-09-25 16:32 ` [PATCH v12 1/6] docs: IOMMU user API Jacob Pan
2020-09-25 16:32 ` [PATCH v12 2/6] iommu/uapi: Add argsz for user filled data Jacob Pan
2020-09-25 16:32 ` Jacob Pan [this message]
2020-09-25 16:32 ` [PATCH v12 4/6] iommu/uapi: Rename uapi functions Jacob Pan
2020-09-25 16:32 ` [PATCH v12 5/6] iommu/uapi: Handle data and argsz filled by users Jacob Pan
2020-09-29 11:26   ` Auger Eric
2020-09-25 16:32 ` [PATCH v12 6/6] iommu/vt-d: Check UAPI data processed by IOMMU core Jacob Pan
2020-09-29 11:26   ` Auger Eric
2020-09-28 18:40 ` [PATCH v12 0/6] IOMMU user API enhancement Jacob Pan
2020-10-01 12:53   ` Joerg Roedel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1601051567-54787-4-git-send-email-jacob.jun.pan@linux.intel.com \
    --to=jacob.pan.linux@gmail.com \
    --cc=alex.williamson@redhat.com \
    --cc=ashok.raj@intel.com \
    --cc=baolu.lu@linux.intel.com \
    --cc=corbet@lwn.net \
    --cc=dwmw2@infradead.org \
    --cc=eric.auger@redhat.com \
    --cc=hao.wu@intel.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=jacob.jun.pan@linux.intel.com \
    --cc=jean-philippe@linaro.com \
    --cc=joro@8bytes.org \
    --cc=kevin.tian@intel.com \
    --cc=linux-api@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rdunlap@infradead.org \
    --cc=yi.l.liu@intel.com \
    --cc=yi.y.sun@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).