linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Moshe Shemesh <moshe@mellanox.com>
To: "David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>, Jiri Pirko <jiri@nvidia.com>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	Moshe Shemesh <moshe@mellanox.com>
Subject: [PATCH net-next 11/16] net/mlx5: Add support for devlink reload action fw activate
Date: Thu,  1 Oct 2020 16:59:14 +0300	[thread overview]
Message-ID: <1601560759-11030-12-git-send-email-moshe@mellanox.com> (raw)
In-Reply-To: <1601560759-11030-1-git-send-email-moshe@mellanox.com>

Add support for devlink reload action fw_activate. To activate firmware
image the mlx5 driver resets the firmware and reloads it from flash. If
a new image was stored on flash it will be loaded. Once this reload
command is executed the driver initiates fw sync reset flow, where the
firmware synchronizes all PFs on coming reset and driver reload.

Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
---
RFCv4 -> RFCv5:
- Add remote actions stats
- If devlink reload is not supported, show only remote_stats
RFCv3 -> RFCv4:
- Renamed DEVLINK_ATTR_RELOAD_ACTION_CNT to
  DEVLINK_ATTR_RELOAD_ACTION_STAT
- Add stats per action per limit level
RFCv2 -> RFCv3:
- Add reload actions counters instead of supported reload actions
  (reload actions counters are only for supported action so no need for
   both)
RFCv1 -> RFCv2:
- Removed DEVLINK_ATTR_RELOAD_DEFAULT_LEVEL
- Removed DEVLINK_ATTR_RELOAD_LEVELS_INFO
- Have actions instead of levels
---
 .../net/ethernet/mellanox/mlx5/core/devlink.c | 59 +++++++++++++++++--
 .../ethernet/mellanox/mlx5/core/fw_reset.c    | 59 +++++++++++++++++--
 .../ethernet/mellanox/mlx5/core/fw_reset.h    |  1 +
 3 files changed, 108 insertions(+), 11 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/devlink.c b/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
index 47f3dbc80c7c..13153454cc05 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
@@ -4,6 +4,7 @@
 #include <devlink.h>
 
 #include "mlx5_core.h"
+#include "fw_reset.h"
 #include "fs_core.h"
 #include "eswitch.h"
 
@@ -84,6 +85,32 @@ mlx5_devlink_info_get(struct devlink *devlink, struct devlink_info_req *req,
 	return 0;
 }
 
+static int mlx5_devlink_reload_fw_activate(struct devlink *devlink, struct netlink_ext_ack *extack)
+{
+	struct mlx5_core_dev *dev = devlink_priv(devlink);
+	u8 reset_level, reset_type, net_port_alive;
+	int err;
+
+	err = mlx5_fw_reset_query(dev, &reset_level, &reset_type);
+	if (err)
+		return err;
+	if (!(reset_level & MLX5_MFRL_REG_RESET_LEVEL3)) {
+		NL_SET_ERR_MSG_MOD(extack, "FW activate requires reboot");
+		return -EINVAL;
+	}
+
+	net_port_alive = !!(reset_type & MLX5_MFRL_REG_RESET_TYPE_NET_PORT_ALIVE);
+	err = mlx5_fw_reset_set_reset_sync(dev, net_port_alive);
+	if (err)
+		goto out;
+
+	err = mlx5_fw_reset_wait_reset_done(dev);
+out:
+	if (err)
+		NL_SET_ERR_MSG_MOD(extack, "FW activate command failed");
+	return err;
+}
+
 static int mlx5_devlink_reload_down(struct devlink *devlink, bool netns_change,
 				    enum devlink_reload_action action,
 				    enum devlink_reload_limit limit,
@@ -91,8 +118,17 @@ static int mlx5_devlink_reload_down(struct devlink *devlink, bool netns_change,
 {
 	struct mlx5_core_dev *dev = devlink_priv(devlink);
 
-	mlx5_unload_one(dev, false);
-	return 0;
+	switch (action) {
+	case DEVLINK_RELOAD_ACTION_DRIVER_REINIT:
+		mlx5_unload_one(dev, false);
+		return 0;
+	case DEVLINK_RELOAD_ACTION_FW_ACTIVATE:
+		return mlx5_devlink_reload_fw_activate(devlink, extack);
+	default:
+		/* Unsupported action should not get to this function */
+		WARN_ON(1);
+		return -EOPNOTSUPP;
+	}
 }
 
 static int mlx5_devlink_reload_up(struct devlink *devlink, enum devlink_reload_action action,
@@ -101,8 +137,20 @@ static int mlx5_devlink_reload_up(struct devlink *devlink, enum devlink_reload_a
 {
 	struct mlx5_core_dev *dev = devlink_priv(devlink);
 
-	*actions_performed = BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT);
-	return mlx5_load_one(dev, false);
+	*actions_performed = BIT(action);
+	switch (action) {
+	case DEVLINK_RELOAD_ACTION_DRIVER_REINIT:
+	case DEVLINK_RELOAD_ACTION_FW_ACTIVATE:
+		/* On fw_activate action, also driver is reloaded and reinit performed */
+		*actions_performed |= BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT);
+		return mlx5_load_one(dev, false);
+	default:
+		/* Unsupported action should not get to this function */
+		WARN_ON(1);
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
 }
 
 static const struct devlink_ops mlx5_devlink_ops = {
@@ -118,7 +166,8 @@ static const struct devlink_ops mlx5_devlink_ops = {
 #endif
 	.flash_update = mlx5_devlink_flash_update,
 	.info_get = mlx5_devlink_info_get,
-	.reload_actions = BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT),
+	.reload_actions = BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT) |
+			  BIT(DEVLINK_RELOAD_ACTION_FW_ACTIVATE),
 	.reload_down = mlx5_devlink_reload_down,
 	.reload_up = mlx5_devlink_reload_up,
 };
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
index 56ae72e016f1..f5ffb6fc55c3 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
@@ -5,6 +5,7 @@
 
 enum {
 	MLX5_FW_RESET_FLAGS_RESET_REQUESTED,
+	MLX5_FW_RESET_FLAGS_PENDING_COMP
 };
 
 struct mlx5_fw_reset {
@@ -17,6 +18,8 @@ struct mlx5_fw_reset {
 	struct work_struct reset_abort_work;
 	unsigned long reset_flags;
 	struct timer_list timer;
+	struct completion done;
+	int ret;
 };
 
 static int mlx5_reg_mfrl_set(struct mlx5_core_dev *dev, u8 reset_level,
@@ -58,7 +61,14 @@ int mlx5_fw_reset_query(struct mlx5_core_dev *dev, u8 *reset_level, u8 *reset_ty
 
 int mlx5_fw_reset_set_reset_sync(struct mlx5_core_dev *dev, u8 reset_type_sel)
 {
-	return mlx5_reg_mfrl_set(dev, MLX5_MFRL_REG_RESET_LEVEL3, reset_type_sel, 0, true);
+	struct mlx5_fw_reset *fw_reset = dev->priv.fw_reset;
+	int err;
+
+	set_bit(MLX5_FW_RESET_FLAGS_PENDING_COMP, &fw_reset->reset_flags);
+	err = mlx5_reg_mfrl_set(dev, MLX5_MFRL_REG_RESET_LEVEL3, reset_type_sel, 0, true);
+	if (err)
+		clear_bit(MLX5_FW_RESET_FLAGS_PENDING_COMP, &fw_reset->reset_flags);
+	return err;
 }
 
 int mlx5_fw_reset_set_live_patch(struct mlx5_core_dev *dev)
@@ -66,19 +76,35 @@ int mlx5_fw_reset_set_live_patch(struct mlx5_core_dev *dev)
 	return mlx5_reg_mfrl_set(dev, MLX5_MFRL_REG_RESET_LEVEL0, 0, 0, false);
 }
 
+static void mlx5_fw_reset_complete_reload(struct mlx5_core_dev *dev)
+{
+	struct mlx5_fw_reset *fw_reset = dev->priv.fw_reset;
+
+	/* if this is the driver that initiated the fw reset, devlink completed the reload */
+	if (test_bit(MLX5_FW_RESET_FLAGS_PENDING_COMP, &fw_reset->reset_flags)) {
+		complete(&fw_reset->done);
+	} else {
+		mlx5_load_one(dev, false);
+		devlink_remote_reload_actions_performed(priv_to_devlink(dev), 0,
+							BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT) |
+							BIT(DEVLINK_RELOAD_ACTION_FW_ACTIVATE));
+	}
+}
+
 static void mlx5_sync_reset_reload_work(struct work_struct *work)
 {
 	struct mlx5_fw_reset *fw_reset = container_of(work, struct mlx5_fw_reset,
 						      reset_reload_work);
 	struct mlx5_core_dev *dev = fw_reset->dev;
+	int err;
 
 	mlx5_enter_error_state(dev, true);
 	mlx5_unload_one(dev, false);
-	if (mlx5_health_wait_pci_up(dev)) {
+	err = mlx5_health_wait_pci_up(dev);
+	if (err)
 		mlx5_core_err(dev, "reset reload flow aborted, PCI reads still not working\n");
-		return;
-	}
-	mlx5_load_one(dev, false);
+	fw_reset->ret = err;
+	mlx5_fw_reset_complete_reload(dev);
 }
 
 static void mlx5_stop_sync_reset_poll(struct mlx5_core_dev *dev)
@@ -269,7 +295,8 @@ static void mlx5_sync_reset_now_event(struct work_struct *work)
 	mlx5_enter_error_state(dev, true);
 	mlx5_unload_one(dev, false);
 done:
-	mlx5_load_one(dev, false);
+	fw_reset->ret = err;
+	mlx5_fw_reset_complete_reload(dev);
 }
 
 static void mlx5_sync_reset_abort_event(struct work_struct *work)
@@ -318,6 +345,25 @@ static int fw_reset_event_notifier(struct notifier_block *nb, unsigned long acti
 	return NOTIFY_OK;
 }
 
+#define MLX5_FW_RESET_TIMEOUT_MSEC 5000
+int mlx5_fw_reset_wait_reset_done(struct mlx5_core_dev *dev)
+{
+	unsigned long timeout = msecs_to_jiffies(MLX5_FW_RESET_TIMEOUT_MSEC);
+	struct mlx5_fw_reset *fw_reset = dev->priv.fw_reset;
+	int err;
+
+	if (!wait_for_completion_timeout(&fw_reset->done, timeout)) {
+		mlx5_core_warn(dev, "FW sync reset timeout after %d seconds\n",
+			       MLX5_FW_RESET_TIMEOUT_MSEC / 1000);
+		err = -ETIMEDOUT;
+		goto out;
+	}
+	err = fw_reset->ret;
+out:
+	clear_bit(MLX5_FW_RESET_FLAGS_PENDING_COMP, &fw_reset->reset_flags);
+	return err;
+}
+
 void mlx5_fw_reset_events_start(struct mlx5_core_dev *dev)
 {
 	struct mlx5_fw_reset *fw_reset = dev->priv.fw_reset;
@@ -351,6 +397,7 @@ int mlx5_fw_reset_init(struct mlx5_core_dev *dev)
 	INIT_WORK(&fw_reset->reset_now_work, mlx5_sync_reset_now_event);
 	INIT_WORK(&fw_reset->reset_abort_work, mlx5_sync_reset_abort_event);
 
+	init_completion(&fw_reset->done);
 	return 0;
 }
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.h b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.h
index a231f7848a8f..e7937447ce1d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.h
@@ -10,6 +10,7 @@ int mlx5_fw_reset_query(struct mlx5_core_dev *dev, u8 *reset_level, u8 *reset_ty
 int mlx5_fw_reset_set_reset_sync(struct mlx5_core_dev *dev, u8 reset_type_sel);
 int mlx5_fw_reset_set_live_patch(struct mlx5_core_dev *dev);
 
+int mlx5_fw_reset_wait_reset_done(struct mlx5_core_dev *dev);
 void mlx5_fw_reset_events_start(struct mlx5_core_dev *dev);
 void mlx5_fw_reset_events_stop(struct mlx5_core_dev *dev);
 int mlx5_fw_reset_init(struct mlx5_core_dev *dev);
-- 
2.18.2


  parent reply	other threads:[~2020-10-01 14:02 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-01 13:59 [PATCH net-next 00/16] Add devlink reload action and limit options Moshe Shemesh
2020-10-01 13:59 ` [PATCH net-next 01/16] devlink: Change devlink_reload_supported() param type Moshe Shemesh
2020-10-01 20:54   ` Jakub Kicinski
2020-10-02 15:13   ` Jiri Pirko
2020-10-05 18:34   ` Jacob Keller
2020-10-01 13:59 ` [PATCH net-next 02/16] devlink: Add reload action option to devlink reload command Moshe Shemesh
2020-10-01 20:59   ` Jakub Kicinski
2020-10-02 15:19   ` Jiri Pirko
2020-10-04  6:30     ` Moshe Shemesh
2020-10-03  7:52   ` Jiri Pirko
2020-10-04  6:45     ` Moshe Shemesh
2020-10-05 18:39   ` Jacob Keller
2020-10-01 13:59 ` [PATCH net-next 03/16] devlink: Add devlink reload limit option Moshe Shemesh
2020-10-01 21:14   ` Jakub Kicinski
2020-10-02 15:01     ` Moshe Shemesh
2020-10-01 21:15   ` Jakub Kicinski
2020-10-03  7:51   ` Jiri Pirko
2020-10-03 15:04     ` Jakub Kicinski
2020-10-04  7:18       ` Moshe Shemesh
2020-10-05 18:53       ` Jacob Keller
2020-10-04  6:42     ` Moshe Shemesh
2020-10-05 12:18       ` Jiri Pirko
2020-10-05 18:45   ` Jacob Keller
2020-10-01 13:59 ` [PATCH net-next 04/16] devlink: Add reload stats Moshe Shemesh
2020-10-01 21:25   ` Jakub Kicinski
2020-10-02 15:07     ` Moshe Shemesh
2020-10-03  9:00   ` Jiri Pirko
2020-10-04  6:59     ` Moshe Shemesh
2020-10-01 13:59 ` [PATCH net-next 05/16] devlink: Add remote " Moshe Shemesh
2020-10-01 21:48   ` Jakub Kicinski
2020-10-03  9:05   ` Jiri Pirko
2020-10-04  7:09     ` Moshe Shemesh
2020-10-05 19:12       ` Jacob Keller
2020-10-07  5:41         ` Moshe Shemesh
2020-10-01 13:59 ` [PATCH net-next 06/16] net/mlx5: Add functions to set/query MFRL register Moshe Shemesh
2020-10-01 13:59 ` [PATCH net-next 07/16] net/mlx5: Set cap for pci sync for fw update event Moshe Shemesh
2020-10-01 13:59 ` [PATCH net-next 08/16] net/mlx5: Handle sync reset request event Moshe Shemesh
2020-10-01 13:59 ` [PATCH net-next 09/16] net/mlx5: Handle sync reset now event Moshe Shemesh
2020-10-01 13:59 ` [PATCH net-next 10/16] net/mlx5: Handle sync reset abort event Moshe Shemesh
2020-10-01 13:59 ` Moshe Shemesh [this message]
2020-10-01 13:59 ` [PATCH net-next 12/16] devlink: Add enable_remote_dev_reset generic parameter Moshe Shemesh
2020-10-01 13:59 ` [PATCH net-next 13/16] net/mlx5: Add devlink param enable_remote_dev_reset support Moshe Shemesh
2020-10-01 13:59 ` [PATCH net-next 14/16] net/mlx5: Add support for fw live patch event Moshe Shemesh
2020-10-01 13:59 ` [PATCH net-next 15/16] net/mlx5: Add support for devlink reload limit no reset Moshe Shemesh
2020-10-01 21:52   ` Jakub Kicinski
2020-10-02 15:08     ` Moshe Shemesh
2020-10-01 13:59 ` [PATCH net-next 16/16] devlink: Add Documentation/networking/devlink/devlink-reload.rst Moshe Shemesh
2020-10-03  9:14   ` Jiri Pirko
2020-10-04  7:15     ` Moshe Shemesh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1601560759-11030-12-git-send-email-moshe@mellanox.com \
    --to=moshe@mellanox.com \
    --cc=davem@davemloft.net \
    --cc=jiri@nvidia.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).