* [PATCH v2 0/3] Add Camera clock controller driver for SC7180
@ 2020-10-13 17:11 Taniya Das
2020-10-13 17:11 ` [PATCH v2 1/3] clk: qcom: clk-alpha-pll: Add support for controlling Agera PLLs Taniya Das
` (2 more replies)
0 siblings, 3 replies; 11+ messages in thread
From: Taniya Das @ 2020-10-13 17:11 UTC (permalink / raw)
To: Stephen Boyd, Michael Turquette
Cc: David Brown, Rajendra Nayak, linux-arm-msm, linux-soc, linux-clk,
linux-kernel, Andy Gross, devicetree, robh, robh+dt, Taniya Das
[v2]
* Update PLL set rate function : clk_alpha_pll_agera_set_rate
* Remove mb()
[v1]
* Add support for Agera PLL which is used in the camera clock controller.
* Add driver support for camera clock controller for SC7180 and also
update device tree bindings for the various clocks supported in the
clock controller.
Taniya Das (3):
clk: qcom: clk-alpha-pll: Add support for controlling Agera PLLs
dt-bindings: clock: Add YAML schemas for the QCOM Camera clock
bindings.
clk: qcom: camcc: Add camera clock controller driver for SC7180
.../bindings/clock/qcom,sc7180-camcc.yaml | 73 +
drivers/clk/qcom/Kconfig | 9 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/camcc-sc7180.c | 1737 ++++++++++++++++++++
drivers/clk/qcom/clk-alpha-pll.c | 80 +
drivers/clk/qcom/clk-alpha-pll.h | 4 +
include/dt-bindings/clock/qcom,camcc-sc7180.h | 121 ++
7 files changed, 2025 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
create mode 100644 drivers/clk/qcom/camcc-sc7180.c
create mode 100644 include/dt-bindings/clock/qcom,camcc-sc7180.h
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 1/3] clk: qcom: clk-alpha-pll: Add support for controlling Agera PLLs
2020-10-13 17:11 [PATCH v2 0/3] Add Camera clock controller driver for SC7180 Taniya Das
@ 2020-10-13 17:11 ` Taniya Das
2020-10-14 2:07 ` Stephen Boyd
2020-10-13 17:11 ` [PATCH v2 2/3] dt-bindings: clock: Add YAML schemas for the QCOM Camera clock bindings Taniya Das
2020-10-13 17:11 ` [PATCH v2 3/3] clk: qcom: camcc: Add camera clock controller driver for SC7180 Taniya Das
2 siblings, 1 reply; 11+ messages in thread
From: Taniya Das @ 2020-10-13 17:11 UTC (permalink / raw)
To: Stephen Boyd, Michael Turquette
Cc: David Brown, Rajendra Nayak, linux-arm-msm, linux-soc, linux-clk,
linux-kernel, Andy Gross, devicetree, robh, robh+dt, Taniya Das
Add programming sequence support for managing the Agera PLLs.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
drivers/clk/qcom/clk-alpha-pll.c | 80 ++++++++++++++++++++++++++++++++++++++++
drivers/clk/qcom/clk-alpha-pll.h | 4 ++
2 files changed, 84 insertions(+)
diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 26139ef..17e1fc0 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -116,6 +116,16 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
[PLL_OFF_OPMODE] = 0x38,
[PLL_OFF_ALPHA_VAL] = 0x40,
},
+ [CLK_ALPHA_PLL_TYPE_AGERA] = {
+ [PLL_OFF_L_VAL] = 0x04,
+ [PLL_OFF_ALPHA_VAL] = 0x08,
+ [PLL_OFF_USER_CTL] = 0x0c,
+ [PLL_OFF_CONFIG_CTL] = 0x10,
+ [PLL_OFF_CONFIG_CTL_U] = 0x14,
+ [PLL_OFF_TEST_CTL] = 0x18,
+ [PLL_OFF_TEST_CTL_U] = 0x1c,
+ [PLL_OFF_STATUS] = 0x2c,
+ },
};
EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
@@ -1561,3 +1571,73 @@ const struct clk_ops clk_alpha_pll_postdiv_lucid_ops = {
.set_rate = clk_alpha_pll_postdiv_fabia_set_rate,
};
EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_lucid_ops);
+
+void clk_agera_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+ const struct alpha_pll_config *config)
+{
+ if (config->l)
+ regmap_write(regmap, PLL_L_VAL(pll), config->l);
+
+ if (config->alpha)
+ regmap_write(regmap, PLL_ALPHA_VAL(pll), config->alpha);
+
+ if (config->user_ctl_val)
+ regmap_write(regmap, PLL_USER_CTL(pll), config->user_ctl_val);
+
+ if (config->config_ctl_val)
+ regmap_write(regmap, PLL_CONFIG_CTL(pll),
+ config->config_ctl_val);
+
+ if (config->config_ctl_hi_val)
+ regmap_write(regmap, PLL_CONFIG_CTL_U(pll),
+ config->config_ctl_hi_val);
+
+ if (config->test_ctl_val)
+ regmap_write(regmap, PLL_TEST_CTL(pll),
+ config->test_ctl_val);
+
+ if (config->test_ctl_hi_val)
+ regmap_write(regmap, PLL_TEST_CTL_U(pll),
+ config->test_ctl_hi_val);
+}
+EXPORT_SYMBOL_GPL(clk_agera_pll_configure);
+
+static int clk_alpha_pll_agera_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long prate)
+{
+ struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
+ u32 l, alpha_width = pll_alpha_width(pll);
+ unsigned long rrate, max = rate + PLL_RATE_MARGIN;
+ u64 a;
+
+ rrate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
+
+ /*
+ * Due to limited number of bits for fractional rate programming, the
+ * rounded up rate could be marginally higher than the requested rate.
+ */
+ if (rrate > (rate + PLL_RATE_MARGIN) || rrate < rate) {
+ pr_err("%s: Rounded rate %lu not within range [%lu, %lu)\n",
+ clk_hw_get_name(hw), rrate, rate, max);
+ return -EINVAL;
+ }
+
+ /* change L_VAL without having to go through the power on sequence */
+ regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
+ regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
+
+ if (clk_hw_is_enabled(hw))
+ return wait_for_pll_enable_lock(pll);
+
+ return 0;
+}
+
+const struct clk_ops clk_alpha_pll_agera_ops = {
+ .enable = clk_alpha_pll_enable,
+ .disable = clk_alpha_pll_disable,
+ .is_enabled = clk_alpha_pll_is_enabled,
+ .recalc_rate = alpha_pll_fabia_recalc_rate,
+ .round_rate = clk_alpha_pll_round_rate,
+ .set_rate = clk_alpha_pll_agera_set_rate,
+};
+EXPORT_SYMBOL_GPL(clk_alpha_pll_agera_ops);
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index d3201b8..0ea30d2 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -15,6 +15,7 @@ enum {
CLK_ALPHA_PLL_TYPE_FABIA,
CLK_ALPHA_PLL_TYPE_TRION,
CLK_ALPHA_PLL_TYPE_LUCID = CLK_ALPHA_PLL_TYPE_TRION,
+ CLK_ALPHA_PLL_TYPE_AGERA,
CLK_ALPHA_PLL_TYPE_MAX,
};
@@ -141,6 +142,7 @@ extern const struct clk_ops clk_alpha_pll_postdiv_trion_ops;
extern const struct clk_ops clk_alpha_pll_lucid_ops;
#define clk_alpha_pll_fixed_lucid_ops clk_alpha_pll_fixed_trion_ops
extern const struct clk_ops clk_alpha_pll_postdiv_lucid_ops;
+extern const struct clk_ops clk_alpha_pll_agera_ops;
void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
const struct alpha_pll_config *config);
@@ -148,6 +150,8 @@ void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
const struct alpha_pll_config *config);
void clk_trion_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
const struct alpha_pll_config *config);
+void clk_agera_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+ const struct alpha_pll_config *config);
#define clk_lucid_pll_configure(pll, regmap, config) \
clk_trion_pll_configure(pll, regmap, config)
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v2 2/3] dt-bindings: clock: Add YAML schemas for the QCOM Camera clock bindings.
2020-10-13 17:11 [PATCH v2 0/3] Add Camera clock controller driver for SC7180 Taniya Das
2020-10-13 17:11 ` [PATCH v2 1/3] clk: qcom: clk-alpha-pll: Add support for controlling Agera PLLs Taniya Das
@ 2020-10-13 17:11 ` Taniya Das
2020-10-14 2:09 ` Stephen Boyd
2020-10-16 17:25 ` Rob Herring
2020-10-13 17:11 ` [PATCH v2 3/3] clk: qcom: camcc: Add camera clock controller driver for SC7180 Taniya Das
2 siblings, 2 replies; 11+ messages in thread
From: Taniya Das @ 2020-10-13 17:11 UTC (permalink / raw)
To: Stephen Boyd, Michael Turquette
Cc: David Brown, Rajendra Nayak, linux-arm-msm, linux-soc, linux-clk,
linux-kernel, Andy Gross, devicetree, robh, robh+dt, Taniya Das
The Camera Subsystem clock provider have a bunch of generic properties
that are needed in a device tree. Add a YAML schemas for those.
Add clock ids for camera clocks which are required to bring the camera
subsystem out of reset.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
.../bindings/clock/qcom,sc7180-camcc.yaml | 73 +++++++++++++
include/dt-bindings/clock/qcom,camcc-sc7180.h | 121 +++++++++++++++++++++
2 files changed, 194 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
create mode 100644 include/dt-bindings/clock/qcom,camcc-sc7180.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
new file mode 100644
index 0000000..07bd38e
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,sc7180-camcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Camera Clock & Reset Controller Binding for SC7180
+
+maintainers:
+ - Taniya Das <tdas@codeaurora.org>
+
+description: |
+ Qualcomm camera clock control module which supports the clocks, resets and
+ power domains on SC7180.
+
+ See also:
+ - dt-bindings/clock/qcom,camcc-sc7180.h.
+
+properties:
+ compatible:
+ const: qcom,sc7180-camcc
+
+ clocks:
+ items:
+ - description: Board XO source
+ - description: Camera_ahb clock from GCC
+ - description: Camera XO clock from GCC
+
+ clock-names:
+ items:
+ - const: bi_tcxo
+ - const: iface
+ - const: xo
+
+ '#clock-cells':
+ const: 1
+
+ '#reset-cells':
+ const: 1
+
+ '#power-domain-cells':
+ const: 1
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - '#clock-cells'
+ - '#reset-cells'
+ - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+ #include <dt-bindings/clock/qcom,rpmh.h>
+ clock-controller@ad00000 {
+ compatible = "qcom,sc7180-camcc";
+ reg = <0x0ad00000 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&gcc GCC_CAMERA_AHB_CLK>,
+ <&gcc GCC_CAMERA_XO_CLK>;
+ clock-names = "bi_tcxo", "iface", "xo";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ };
+...
diff --git a/include/dt-bindings/clock/qcom,camcc-sc7180.h b/include/dt-bindings/clock/qcom,camcc-sc7180.h
new file mode 100644
index 0000000..ef7d3a0
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,camcc-sc7180.h
@@ -0,0 +1,121 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_CAM_CC_SC7180_H
+#define _DT_BINDINGS_CLK_QCOM_CAM_CC_SC7180_H
+
+/* CAM_CC clocks */
+#define CAM_CC_PLL2_OUT_EARLY 0
+#define CAM_CC_PLL0 1
+#define CAM_CC_PLL1 2
+#define CAM_CC_PLL2 3
+#define CAM_CC_PLL2_OUT_AUX 4
+#define CAM_CC_PLL3 5
+#define CAM_CC_CAMNOC_AXI_CLK 6
+#define CAM_CC_CCI_0_CLK 7
+#define CAM_CC_CCI_0_CLK_SRC 8
+#define CAM_CC_CCI_1_CLK 9
+#define CAM_CC_CCI_1_CLK_SRC 10
+#define CAM_CC_CORE_AHB_CLK 11
+#define CAM_CC_CPAS_AHB_CLK 12
+#define CAM_CC_CPHY_RX_CLK_SRC 13
+#define CAM_CC_CSI0PHYTIMER_CLK 14
+#define CAM_CC_CSI0PHYTIMER_CLK_SRC 15
+#define CAM_CC_CSI1PHYTIMER_CLK 16
+#define CAM_CC_CSI1PHYTIMER_CLK_SRC 17
+#define CAM_CC_CSI2PHYTIMER_CLK 18
+#define CAM_CC_CSI2PHYTIMER_CLK_SRC 19
+#define CAM_CC_CSI3PHYTIMER_CLK 20
+#define CAM_CC_CSI3PHYTIMER_CLK_SRC 21
+#define CAM_CC_CSIPHY0_CLK 22
+#define CAM_CC_CSIPHY1_CLK 23
+#define CAM_CC_CSIPHY2_CLK 24
+#define CAM_CC_CSIPHY3_CLK 25
+#define CAM_CC_FAST_AHB_CLK_SRC 26
+#define CAM_CC_ICP_APB_CLK 27
+#define CAM_CC_ICP_ATB_CLK 28
+#define CAM_CC_ICP_CLK 29
+#define CAM_CC_ICP_CLK_SRC 30
+#define CAM_CC_ICP_CTI_CLK 31
+#define CAM_CC_ICP_TS_CLK 32
+#define CAM_CC_IFE_0_AXI_CLK 33
+#define CAM_CC_IFE_0_CLK 34
+#define CAM_CC_IFE_0_CLK_SRC 35
+#define CAM_CC_IFE_0_CPHY_RX_CLK 36
+#define CAM_CC_IFE_0_CSID_CLK 37
+#define CAM_CC_IFE_0_CSID_CLK_SRC 38
+#define CAM_CC_IFE_0_DSP_CLK 39
+#define CAM_CC_IFE_1_AXI_CLK 40
+#define CAM_CC_IFE_1_CLK 41
+#define CAM_CC_IFE_1_CLK_SRC 42
+#define CAM_CC_IFE_1_CPHY_RX_CLK 43
+#define CAM_CC_IFE_1_CSID_CLK 44
+#define CAM_CC_IFE_1_CSID_CLK_SRC 45
+#define CAM_CC_IFE_1_DSP_CLK 46
+#define CAM_CC_IFE_LITE_CLK 47
+#define CAM_CC_IFE_LITE_CLK_SRC 48
+#define CAM_CC_IFE_LITE_CPHY_RX_CLK 49
+#define CAM_CC_IFE_LITE_CSID_CLK 50
+#define CAM_CC_IFE_LITE_CSID_CLK_SRC 51
+#define CAM_CC_IPE_0_AHB_CLK 52
+#define CAM_CC_IPE_0_AREG_CLK 53
+#define CAM_CC_IPE_0_AXI_CLK 54
+#define CAM_CC_IPE_0_CLK 55
+#define CAM_CC_IPE_0_CLK_SRC 56
+#define CAM_CC_JPEG_CLK 57
+#define CAM_CC_JPEG_CLK_SRC 58
+#define CAM_CC_LRME_CLK 59
+#define CAM_CC_LRME_CLK_SRC 60
+#define CAM_CC_MCLK0_CLK 61
+#define CAM_CC_MCLK0_CLK_SRC 62
+#define CAM_CC_MCLK1_CLK 63
+#define CAM_CC_MCLK1_CLK_SRC 64
+#define CAM_CC_MCLK2_CLK 65
+#define CAM_CC_MCLK2_CLK_SRC 66
+#define CAM_CC_MCLK3_CLK 67
+#define CAM_CC_MCLK3_CLK_SRC 68
+#define CAM_CC_MCLK4_CLK 69
+#define CAM_CC_MCLK4_CLK_SRC 70
+#define CAM_CC_BPS_AHB_CLK 71
+#define CAM_CC_BPS_AREG_CLK 72
+#define CAM_CC_BPS_AXI_CLK 73
+#define CAM_CC_BPS_CLK 74
+#define CAM_CC_BPS_CLK_SRC 75
+#define CAM_CC_SLOW_AHB_CLK_SRC 76
+#define CAM_CC_SOC_AHB_CLK 77
+#define CAM_CC_SYS_TMR_CLK 78
+
+/* CAM_CC power domains */
+#define BPS_GDSC 0
+#define IFE_0_GDSC 1
+#define IFE_1_GDSC 2
+#define IPE_0_GDSC 3
+#define TITAN_TOP_GDSC 4
+
+/* CAM_CC resets */
+#define CAM_CC_BPS_BCR 0
+#define CAM_CC_CAMNOC_BCR 1
+#define CAM_CC_CCI_0_BCR 2
+#define CAM_CC_CCI_1_BCR 3
+#define CAM_CC_CPAS_BCR 4
+#define CAM_CC_CSI0PHY_BCR 5
+#define CAM_CC_CSI1PHY_BCR 6
+#define CAM_CC_CSI2PHY_BCR 7
+#define CAM_CC_CSI3PHY_BCR 8
+#define CAM_CC_ICP_BCR 9
+#define CAM_CC_IFE_0_BCR 10
+#define CAM_CC_IFE_1_BCR 11
+#define CAM_CC_IFE_LITE_BCR 12
+#define CAM_CC_IPE_0_BCR 13
+#define CAM_CC_JPEG_BCR 14
+#define CAM_CC_LRME_BCR 15
+#define CAM_CC_MCLK0_BCR 16
+#define CAM_CC_MCLK1_BCR 17
+#define CAM_CC_MCLK2_BCR 18
+#define CAM_CC_MCLK3_BCR 19
+#define CAM_CC_MCLK4_BCR 20
+#define CAM_CC_TITAN_TOP_BCR 21
+
+#endif
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
^ permalink raw reply related [flat|nested] 11+ messages in thread
* [PATCH v2 3/3] clk: qcom: camcc: Add camera clock controller driver for SC7180
2020-10-13 17:11 [PATCH v2 0/3] Add Camera clock controller driver for SC7180 Taniya Das
2020-10-13 17:11 ` [PATCH v2 1/3] clk: qcom: clk-alpha-pll: Add support for controlling Agera PLLs Taniya Das
2020-10-13 17:11 ` [PATCH v2 2/3] dt-bindings: clock: Add YAML schemas for the QCOM Camera clock bindings Taniya Das
@ 2020-10-13 17:11 ` Taniya Das
2020-10-14 1:59 ` Stephen Boyd
2 siblings, 1 reply; 11+ messages in thread
From: Taniya Das @ 2020-10-13 17:11 UTC (permalink / raw)
To: Stephen Boyd, Michael Turquette
Cc: David Brown, Rajendra Nayak, linux-arm-msm, linux-soc, linux-clk,
linux-kernel, Andy Gross, devicetree, robh, robh+dt, Taniya Das
Add support for the camera clock controller found on SC7180 based devices.
This would allow camera drivers to probe and control their clocks.
Signed-off-by: Taniya Das <tdas@codeaurora.org>
---
drivers/clk/qcom/Kconfig | 9 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/camcc-sc7180.c | 1737 +++++++++++++++++++++++++++++++++++++++
3 files changed, 1747 insertions(+)
create mode 100644 drivers/clk/qcom/camcc-sc7180.c
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 0583273..7aeebe6 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -290,6 +290,15 @@ config QCS_GCC_404
Say Y if you want to use multimedia devices or peripheral
devices such as UART, SPI, I2C, USB, SD/eMMC, PCIe etc.
+config SC_CAMCC_7180
+ tristate "SC7180 Camera Clock Controller"
+ select SC_GCC_7180
+ help
+ Support for the camera clock controller on Qualcomm Technologies, Inc
+ SC7180 devices.
+ Say Y if you want to support camera devices and functionality such as
+ capturing pictures.
+
config SC_DISPCC_7180
tristate "SC7180 Display Clock Controller"
select SC_GCC_7180
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 9677e76..8e0579f 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -51,6 +51,7 @@ obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
obj-$(CONFIG_QCS_GCC_404) += gcc-qcs404.o
obj-$(CONFIG_QCS_Q6SSTOP_404) += q6sstop-qcs404.o
obj-$(CONFIG_QCS_TURING_404) += turingcc-qcs404.o
+obj-$(CONFIG_SC_CAMCC_7180) += camcc-sc7180.o
obj-$(CONFIG_SC_DISPCC_7180) += dispcc-sc7180.o
obj-$(CONFIG_SC_GCC_7180) += gcc-sc7180.o
obj-$(CONFIG_SC_GPUCC_7180) += gpucc-sc7180.o
diff --git a/drivers/clk/qcom/camcc-sc7180.c b/drivers/clk/qcom/camcc-sc7180.c
new file mode 100644
index 0000000..e954d21
--- /dev/null
+++ b/drivers/clk/qcom/camcc-sc7180.c
@@ -0,0 +1,1737 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pm_clock.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,camcc-sc7180.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "common.h"
+#include "gdsc.h"
+#include "reset.h"
+
+enum {
+ P_BI_TCXO,
+ P_CAM_CC_PLL0_OUT_EVEN,
+ P_CAM_CC_PLL1_OUT_EVEN,
+ P_CAM_CC_PLL2_OUT_AUX,
+ P_CAM_CC_PLL2_OUT_EARLY,
+ P_CAM_CC_PLL3_OUT_MAIN,
+ P_CORE_BI_PLL_TEST_SE,
+};
+
+static struct pll_vco agera_vco[] = {
+ { 600000000, 3300000000, 0 },
+};
+
+static struct pll_vco fabia_vco[] = {
+ { 249600000, 2000000000, 0 },
+};
+
+/* 600MHz configuration */
+static const struct alpha_pll_config cam_cc_pll0_config = {
+ .l = 0x1F,
+ .alpha = 0x4000,
+ .config_ctl_val = 0x20485699,
+ .config_ctl_hi_val = 0x00002067,
+ .test_ctl_val = 0x40000000,
+ .user_ctl_hi_val = 0x00004805,
+ .user_ctl_val = 0x00000001,
+};
+
+static struct clk_alpha_pll cam_cc_pll0 = {
+ .offset = 0x0,
+ .vco_table = fabia_vco,
+ .num_vco = ARRAY_SIZE(fabia_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_FABIA],
+ .clkr = {
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_pll0",
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "bi_tcxo",
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_fabia_ops,
+ },
+ },
+};
+
+/* 860MHz configuration */
+static const struct alpha_pll_config cam_cc_pll1_config = {
+ .l = 0x2A,
+ .alpha = 0x1555,
+ .config_ctl_val = 0x20485699,
+ .config_ctl_hi_val = 0x00002067,
+ .test_ctl_val = 0x40000000,
+ .user_ctl_hi_val = 0x00004805,
+};
+
+static struct clk_alpha_pll cam_cc_pll1 = {
+ .offset = 0x1000,
+ .vco_table = fabia_vco,
+ .num_vco = ARRAY_SIZE(fabia_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_FABIA],
+ .clkr = {
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_pll1",
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "bi_tcxo",
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_fabia_ops,
+ },
+ },
+};
+
+/* 1920MHz configuration */
+static const struct alpha_pll_config cam_cc_pll2_config = {
+ .l = 0x64,
+ .config_ctl_val = 0x20000800,
+ .config_ctl_hi_val = 0x400003D2,
+ .test_ctl_val = 0x04000400,
+ .test_ctl_hi_val = 0x00004000,
+ .user_ctl_val = 0x0000030F,
+};
+
+static struct clk_alpha_pll cam_cc_pll2 = {
+ .offset = 0x2000,
+ .vco_table = agera_vco,
+ .num_vco = ARRAY_SIZE(agera_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_AGERA],
+ .clkr = {
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_pll2",
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "bi_tcxo",
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_agera_ops,
+ },
+ },
+};
+
+static struct clk_fixed_factor cam_cc_pll2_out_early = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_pll2_out_early",
+ .parent_names = (const char *[]){ "cam_cc_pll2" },
+ .num_parents = 1,
+ .ops = &clk_fixed_factor_ops,
+ },
+};
+
+static const struct clk_div_table post_div_table_cam_cc_pll2_out_aux[] = {
+ { 0x3, 4 },
+ { }
+};
+
+static struct clk_alpha_pll_postdiv cam_cc_pll2_out_aux = {
+ .offset = 0x2000,
+ .post_div_shift = 8,
+ .post_div_table = post_div_table_cam_cc_pll2_out_aux,
+ .num_post_div = ARRAY_SIZE(post_div_table_cam_cc_pll2_out_aux),
+ .width = 2,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_AGERA],
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_pll2_out_aux",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_pll2.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_alpha_pll_postdiv_ops,
+ },
+};
+
+/* 1080MHz configuration */
+static const struct alpha_pll_config cam_cc_pll3_config = {
+ .l = 0x38,
+ .alpha = 0x4000,
+ .config_ctl_val = 0x20485699,
+ .config_ctl_hi_val = 0x00002067,
+ .test_ctl_val = 0x40000000,
+ .user_ctl_hi_val = 0x00004805,
+};
+
+static struct clk_alpha_pll cam_cc_pll3 = {
+ .offset = 0x3000,
+ .vco_table = fabia_vco,
+ .num_vco = ARRAY_SIZE(fabia_vco),
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_FABIA],
+ .clkr = {
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_pll3",
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "bi_tcxo",
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_fabia_ops,
+ },
+ },
+};
+
+static const struct parent_map cam_cc_parent_map_0[] = {
+ { P_BI_TCXO, 0 },
+ { P_CAM_CC_PLL1_OUT_EVEN, 2 },
+ { P_CAM_CC_PLL0_OUT_EVEN, 6 },
+ { P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const struct clk_parent_data cam_cc_parent_data_0[] = {
+ { .fw_name = "bi_tcxo" },
+ { .hw = &cam_cc_pll1.clkr.hw },
+ { .hw = &cam_cc_pll0.clkr.hw },
+ { .fw_name = "core_bi_pll_test_se", .name = "core_bi_pll_test_se" },
+};
+
+static const struct parent_map cam_cc_parent_map_1[] = {
+ { P_BI_TCXO, 0 },
+ { P_CAM_CC_PLL2_OUT_AUX, 1 },
+ { P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const struct clk_parent_data cam_cc_parent_data_1[] = {
+ { .fw_name = "bi_tcxo" },
+ { .hw = &cam_cc_pll2_out_aux.clkr.hw },
+ { .fw_name = "core_bi_pll_test_se", .name = "core_bi_pll_test_se" },
+};
+
+static const struct parent_map cam_cc_parent_map_2[] = {
+ { P_BI_TCXO, 0 },
+ { P_CAM_CC_PLL2_OUT_EARLY, 4 },
+ { P_CAM_CC_PLL3_OUT_MAIN, 5 },
+ { P_CAM_CC_PLL0_OUT_EVEN, 6 },
+ { P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const struct clk_parent_data cam_cc_parent_data_2[] = {
+ { .fw_name = "bi_tcxo" },
+ { .hw = &cam_cc_pll2_out_early.hw },
+ { .hw = &cam_cc_pll3.clkr.hw },
+ { .hw = &cam_cc_pll0.clkr.hw },
+ { .fw_name = "core_bi_pll_test_se", .name = "core_bi_pll_test_se" },
+};
+
+static const struct parent_map cam_cc_parent_map_3[] = {
+ { P_BI_TCXO, 0 },
+ { P_CAM_CC_PLL1_OUT_EVEN, 2 },
+ { P_CAM_CC_PLL2_OUT_EARLY, 4 },
+ { P_CAM_CC_PLL3_OUT_MAIN, 5 },
+ { P_CAM_CC_PLL0_OUT_EVEN, 6 },
+ { P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const struct clk_parent_data cam_cc_parent_data_3[] = {
+ { .fw_name = "bi_tcxo" },
+ { .hw = &cam_cc_pll1.clkr.hw },
+ { .hw = &cam_cc_pll2_out_early.hw },
+ { .hw = &cam_cc_pll3.clkr.hw },
+ { .hw = &cam_cc_pll0.clkr.hw },
+ { .fw_name = "core_bi_pll_test_se", .name = "core_bi_pll_test_se" },
+};
+
+static const struct parent_map cam_cc_parent_map_4[] = {
+ { P_BI_TCXO, 0 },
+ { P_CAM_CC_PLL3_OUT_MAIN, 5 },
+ { P_CAM_CC_PLL0_OUT_EVEN, 6 },
+ { P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const struct clk_parent_data cam_cc_parent_data_4[] = {
+ { .fw_name = "bi_tcxo" },
+ { .hw = &cam_cc_pll3.clkr.hw },
+ { .hw = &cam_cc_pll0.clkr.hw },
+ { .fw_name = "core_bi_pll_test_se", .name = "core_bi_pll_test_se" },
+};
+
+static const struct parent_map cam_cc_parent_map_5[] = {
+ { P_BI_TCXO, 0 },
+ { P_CAM_CC_PLL0_OUT_EVEN, 6 },
+ { P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const struct clk_parent_data cam_cc_parent_data_5[] = {
+ { .fw_name = "bi_tcxo" },
+ { .hw = &cam_cc_pll0.clkr.hw },
+ { .fw_name = "core_bi_pll_test_se", .name = "core_bi_pll_test_se" },
+};
+
+static const struct parent_map cam_cc_parent_map_6[] = {
+ { P_BI_TCXO, 0 },
+ { P_CAM_CC_PLL1_OUT_EVEN, 2 },
+ { P_CAM_CC_PLL3_OUT_MAIN, 5 },
+ { P_CAM_CC_PLL0_OUT_EVEN, 6 },
+ { P_CORE_BI_PLL_TEST_SE, 7 },
+};
+
+static const struct clk_parent_data cam_cc_parent_data_6[] = {
+ { .fw_name = "bi_tcxo" },
+ { .hw = &cam_cc_pll1.clkr.hw },
+ { .hw = &cam_cc_pll3.clkr.hw },
+ { .hw = &cam_cc_pll0.clkr.hw },
+ { .fw_name = "core_bi_pll_test_se", .name = "core_bi_pll_test_se" },
+};
+
+static const struct freq_tbl ftbl_cam_cc_bps_clk_src[] = {
+ F(200000000, P_CAM_CC_PLL0_OUT_EVEN, 3, 0, 0),
+ F(360000000, P_CAM_CC_PLL3_OUT_MAIN, 3, 0, 0),
+ F(432000000, P_CAM_CC_PLL3_OUT_MAIN, 2.5, 0, 0),
+ F(480000000, P_CAM_CC_PLL2_OUT_EARLY, 2, 0, 0),
+ F(600000000, P_CAM_CC_PLL0_OUT_EVEN, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_bps_clk_src = {
+ .cmd_rcgr = 0x6010,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_2,
+ .freq_tbl = ftbl_cam_cc_bps_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_bps_clk_src",
+ .parent_data = cam_cc_parent_data_2,
+ .num_parents = 5,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_cci_0_clk_src[] = {
+ F(37500000, P_CAM_CC_PLL0_OUT_EVEN, 16, 0, 0),
+ F(50000000, P_CAM_CC_PLL0_OUT_EVEN, 12, 0, 0),
+ F(100000000, P_CAM_CC_PLL0_OUT_EVEN, 6, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_cci_0_clk_src = {
+ .cmd_rcgr = 0xb0d8,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_5,
+ .freq_tbl = ftbl_cam_cc_cci_0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_cci_0_clk_src",
+ .parent_data = cam_cc_parent_data_5,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_cci_1_clk_src = {
+ .cmd_rcgr = 0xb14c,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_5,
+ .freq_tbl = ftbl_cam_cc_cci_0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_cci_1_clk_src",
+ .parent_data = cam_cc_parent_data_5,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_cphy_rx_clk_src[] = {
+ F(150000000, P_CAM_CC_PLL0_OUT_EVEN, 4, 0, 0),
+ F(270000000, P_CAM_CC_PLL3_OUT_MAIN, 4, 0, 0),
+ F(360000000, P_CAM_CC_PLL3_OUT_MAIN, 3, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_cphy_rx_clk_src = {
+ .cmd_rcgr = 0x9064,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_3,
+ .freq_tbl = ftbl_cam_cc_cphy_rx_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_cphy_rx_clk_src",
+ .parent_data = cam_cc_parent_data_3,
+ .num_parents = 6,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_csi0phytimer_clk_src[] = {
+ F(300000000, P_CAM_CC_PLL0_OUT_EVEN, 2, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_csi0phytimer_clk_src = {
+ .cmd_rcgr = 0x5004,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_csi0phytimer_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_csi0phytimer_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = 4,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_csi1phytimer_clk_src = {
+ .cmd_rcgr = 0x5028,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_csi0phytimer_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_csi1phytimer_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = 4,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_csi2phytimer_clk_src = {
+ .cmd_rcgr = 0x504c,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_csi0phytimer_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_csi2phytimer_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = 4,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_csi3phytimer_clk_src = {
+ .cmd_rcgr = 0x5070,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_csi0phytimer_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_csi3phytimer_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = 4,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_fast_ahb_clk_src[] = {
+ F(100000000, P_CAM_CC_PLL0_OUT_EVEN, 6, 0, 0),
+ F(200000000, P_CAM_CC_PLL0_OUT_EVEN, 3, 0, 0),
+ F(300000000, P_CAM_CC_PLL0_OUT_EVEN, 2, 0, 0),
+ F(404000000, P_CAM_CC_PLL1_OUT_EVEN, 2, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_fast_ahb_clk_src = {
+ .cmd_rcgr = 0x603c,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_fast_ahb_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_fast_ahb_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = 4,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_icp_clk_src[] = {
+ F(240000000, P_CAM_CC_PLL0_OUT_EVEN, 2.5, 0, 0),
+ F(360000000, P_CAM_CC_PLL3_OUT_MAIN, 3, 0, 0),
+ F(432000000, P_CAM_CC_PLL3_OUT_MAIN, 2.5, 0, 0),
+ F(480000000, P_CAM_CC_PLL2_OUT_EARLY, 2, 0, 0),
+ F(600000000, P_CAM_CC_PLL0_OUT_EVEN, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_icp_clk_src = {
+ .cmd_rcgr = 0xb088,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_2,
+ .freq_tbl = ftbl_cam_cc_icp_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_icp_clk_src",
+ .parent_data = cam_cc_parent_data_2,
+ .num_parents = 5,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_ife_0_clk_src[] = {
+ F(240000000, P_CAM_CC_PLL0_OUT_EVEN, 2.5, 0, 0),
+ F(360000000, P_CAM_CC_PLL3_OUT_MAIN, 3, 0, 0),
+ F(432000000, P_CAM_CC_PLL3_OUT_MAIN, 2.5, 0, 0),
+ F(600000000, P_CAM_CC_PLL0_OUT_EVEN, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_ife_0_clk_src = {
+ .cmd_rcgr = 0x9010,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_4,
+ .freq_tbl = ftbl_cam_cc_ife_0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_ife_0_clk_src",
+ .parent_data = cam_cc_parent_data_4,
+ .num_parents = 4,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_ife_0_csid_clk_src[] = {
+ F(150000000, P_CAM_CC_PLL0_OUT_EVEN, 4, 0, 0),
+ F(270000000, P_CAM_CC_PLL3_OUT_MAIN, 4, 0, 0),
+ F(360000000, P_CAM_CC_PLL3_OUT_MAIN, 3, 0, 0),
+ F(480000000, P_CAM_CC_PLL2_OUT_EARLY, 2, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_ife_0_csid_clk_src = {
+ .cmd_rcgr = 0x903c,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_3,
+ .freq_tbl = ftbl_cam_cc_ife_0_csid_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_ife_0_csid_clk_src",
+ .parent_data = cam_cc_parent_data_3,
+ .num_parents = 6,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_ife_1_clk_src = {
+ .cmd_rcgr = 0xa010,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_4,
+ .freq_tbl = ftbl_cam_cc_ife_0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_ife_1_clk_src",
+ .parent_data = cam_cc_parent_data_4,
+ .num_parents = 4,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_ife_1_csid_clk_src = {
+ .cmd_rcgr = 0xa034,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_3,
+ .freq_tbl = ftbl_cam_cc_ife_0_csid_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_ife_1_csid_clk_src",
+ .parent_data = cam_cc_parent_data_3,
+ .num_parents = 6,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_ife_lite_clk_src = {
+ .cmd_rcgr = 0xb004,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_4,
+ .freq_tbl = ftbl_cam_cc_ife_0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_ife_lite_clk_src",
+ .parent_data = cam_cc_parent_data_4,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_ife_lite_csid_clk_src = {
+ .cmd_rcgr = 0xb024,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_3,
+ .freq_tbl = ftbl_cam_cc_ife_0_csid_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_ife_lite_csid_clk_src",
+ .parent_data = cam_cc_parent_data_3,
+ .num_parents = 6,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_ipe_0_clk_src[] = {
+ F(240000000, P_CAM_CC_PLL0_OUT_EVEN, 2.5, 0, 0),
+ F(360000000, P_CAM_CC_PLL3_OUT_MAIN, 3, 0, 0),
+ F(432000000, P_CAM_CC_PLL3_OUT_MAIN, 2.5, 0, 0),
+ F(540000000, P_CAM_CC_PLL3_OUT_MAIN, 2, 0, 0),
+ F(600000000, P_CAM_CC_PLL0_OUT_EVEN, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_ipe_0_clk_src = {
+ .cmd_rcgr = 0x7010,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_2,
+ .freq_tbl = ftbl_cam_cc_ipe_0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_ipe_0_clk_src",
+ .parent_data = cam_cc_parent_data_2,
+ .num_parents = 5,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_jpeg_clk_src[] = {
+ F(66666667, P_CAM_CC_PLL0_OUT_EVEN, 9, 0, 0),
+ F(133333333, P_CAM_CC_PLL0_OUT_EVEN, 4.5, 0, 0),
+ F(216000000, P_CAM_CC_PLL3_OUT_MAIN, 5, 0, 0),
+ F(320000000, P_CAM_CC_PLL2_OUT_EARLY, 3, 0, 0),
+ F(600000000, P_CAM_CC_PLL0_OUT_EVEN, 1, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_jpeg_clk_src = {
+ .cmd_rcgr = 0xb04c,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_2,
+ .freq_tbl = ftbl_cam_cc_jpeg_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_jpeg_clk_src",
+ .parent_data = cam_cc_parent_data_2,
+ .num_parents = 5,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_lrme_clk_src[] = {
+ F(200000000, P_CAM_CC_PLL0_OUT_EVEN, 3, 0, 0),
+ F(216000000, P_CAM_CC_PLL3_OUT_MAIN, 5, 0, 0),
+ F(300000000, P_CAM_CC_PLL0_OUT_EVEN, 2, 0, 0),
+ F(404000000, P_CAM_CC_PLL1_OUT_EVEN, 2, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_lrme_clk_src = {
+ .cmd_rcgr = 0xb0f8,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_6,
+ .freq_tbl = ftbl_cam_cc_lrme_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_lrme_clk_src",
+ .parent_data = cam_cc_parent_data_6,
+ .num_parents = 5,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_mclk0_clk_src[] = {
+ F(19200000, P_BI_TCXO, 1, 0, 0),
+ F(24000000, P_CAM_CC_PLL2_OUT_AUX, 10, 1, 2),
+ F(64000000, P_CAM_CC_PLL2_OUT_AUX, 7.5, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_mclk0_clk_src = {
+ .cmd_rcgr = 0x4004,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_1,
+ .freq_tbl = ftbl_cam_cc_mclk0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_mclk0_clk_src",
+ .parent_data = cam_cc_parent_data_1,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_mclk1_clk_src = {
+ .cmd_rcgr = 0x4024,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_1,
+ .freq_tbl = ftbl_cam_cc_mclk0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_mclk1_clk_src",
+ .parent_data = cam_cc_parent_data_1,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_mclk2_clk_src = {
+ .cmd_rcgr = 0x4044,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_1,
+ .freq_tbl = ftbl_cam_cc_mclk0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_mclk2_clk_src",
+ .parent_data = cam_cc_parent_data_1,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_mclk3_clk_src = {
+ .cmd_rcgr = 0x4064,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_1,
+ .freq_tbl = ftbl_cam_cc_mclk0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_mclk3_clk_src",
+ .parent_data = cam_cc_parent_data_1,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_rcg2 cam_cc_mclk4_clk_src = {
+ .cmd_rcgr = 0x4084,
+ .mnd_width = 8,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_1,
+ .freq_tbl = ftbl_cam_cc_mclk0_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_mclk4_clk_src",
+ .parent_data = cam_cc_parent_data_1,
+ .num_parents = 3,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static const struct freq_tbl ftbl_cam_cc_slow_ahb_clk_src[] = {
+ F(80000000, P_CAM_CC_PLL0_OUT_EVEN, 7.5, 0, 0),
+ { }
+};
+
+static struct clk_rcg2 cam_cc_slow_ahb_clk_src = {
+ .cmd_rcgr = 0x6058,
+ .mnd_width = 0,
+ .hid_width = 5,
+ .parent_map = cam_cc_parent_map_0,
+ .freq_tbl = ftbl_cam_cc_slow_ahb_clk_src,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "cam_cc_slow_ahb_clk_src",
+ .parent_data = cam_cc_parent_data_0,
+ .num_parents = 4,
+ .flags = CLK_SET_RATE_PARENT | CLK_OPS_PARENT_ENABLE,
+ .ops = &clk_rcg2_ops,
+ },
+};
+
+static struct clk_branch cam_cc_bps_ahb_clk = {
+ .halt_reg = 0x6070,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x6070,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_bps_ahb_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_slow_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_bps_areg_clk = {
+ .halt_reg = 0x6054,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x6054,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_bps_areg_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_fast_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_bps_axi_clk = {
+ .halt_reg = 0x6038,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x6038,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_bps_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_bps_clk = {
+ .halt_reg = 0x6028,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x6028,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_bps_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_bps_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_camnoc_axi_clk = {
+ .halt_reg = 0xb124,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xb124,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_camnoc_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_cci_0_clk = {
+ .halt_reg = 0xb0f0,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xb0f0,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_cci_0_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_cci_0_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_cci_1_clk = {
+ .halt_reg = 0xb164,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xb164,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_cci_1_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_cci_1_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_core_ahb_clk = {
+ .halt_reg = 0xb144,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0xb144,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_core_ahb_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_slow_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_cpas_ahb_clk = {
+ .halt_reg = 0xb11c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xb11c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_cpas_ahb_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_slow_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csi0phytimer_clk = {
+ .halt_reg = 0x501c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x501c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_csi0phytimer_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_csi0phytimer_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csi1phytimer_clk = {
+ .halt_reg = 0x5040,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x5040,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_csi1phytimer_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_csi1phytimer_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csi2phytimer_clk = {
+ .halt_reg = 0x5064,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x5064,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_csi2phytimer_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_csi2phytimer_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csi3phytimer_clk = {
+ .halt_reg = 0x5088,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x5088,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_csi3phytimer_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_csi3phytimer_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csiphy0_clk = {
+ .halt_reg = 0x5020,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x5020,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_csiphy0_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_cphy_rx_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csiphy1_clk = {
+ .halt_reg = 0x5044,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x5044,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_csiphy1_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_cphy_rx_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csiphy2_clk = {
+ .halt_reg = 0x5068,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x5068,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_csiphy2_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_cphy_rx_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_csiphy3_clk = {
+ .halt_reg = 0x508c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x508c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_csiphy3_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_cphy_rx_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_icp_clk = {
+ .halt_reg = 0xb0a0,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xb0a0,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_icp_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_icp_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_0_axi_clk = {
+ .halt_reg = 0x9080,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x9080,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_ife_0_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_0_clk = {
+ .halt_reg = 0x9028,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x9028,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_ife_0_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_ife_0_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_0_cphy_rx_clk = {
+ .halt_reg = 0x907c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x907c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_ife_0_cphy_rx_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_cphy_rx_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_0_csid_clk = {
+ .halt_reg = 0x9054,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x9054,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_ife_0_csid_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_ife_0_csid_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_0_dsp_clk = {
+ .halt_reg = 0x9038,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x9038,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_ife_0_dsp_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_ife_0_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_1_axi_clk = {
+ .halt_reg = 0xa058,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xa058,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_ife_1_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_1_clk = {
+ .halt_reg = 0xa028,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xa028,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_ife_1_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_ife_1_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_1_cphy_rx_clk = {
+ .halt_reg = 0xa054,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xa054,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_ife_1_cphy_rx_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_cphy_rx_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_1_csid_clk = {
+ .halt_reg = 0xa04c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xa04c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_ife_1_csid_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_ife_1_csid_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_1_dsp_clk = {
+ .halt_reg = 0xa030,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xa030,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_ife_1_dsp_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_ife_1_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_lite_clk = {
+ .halt_reg = 0xb01c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xb01c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_ife_lite_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_ife_lite_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_lite_cphy_rx_clk = {
+ .halt_reg = 0xb044,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xb044,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_ife_lite_cphy_rx_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_cphy_rx_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ife_lite_csid_clk = {
+ .halt_reg = 0xb03c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xb03c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_ife_lite_csid_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_ife_lite_csid_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ipe_0_ahb_clk = {
+ .halt_reg = 0x7040,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x7040,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_ipe_0_ahb_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_slow_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ipe_0_areg_clk = {
+ .halt_reg = 0x703c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x703c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_ipe_0_areg_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_fast_ahb_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ipe_0_axi_clk = {
+ .halt_reg = 0x7038,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x7038,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_ipe_0_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_ipe_0_clk = {
+ .halt_reg = 0x7028,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x7028,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_ipe_0_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_ipe_0_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_jpeg_clk = {
+ .halt_reg = 0xb064,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xb064,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_jpeg_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_jpeg_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_lrme_clk = {
+ .halt_reg = 0xb110,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xb110,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_lrme_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_lrme_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_mclk0_clk = {
+ .halt_reg = 0x401c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x401c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_mclk0_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_mclk0_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_mclk1_clk = {
+ .halt_reg = 0x403c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x403c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_mclk1_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_mclk1_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_mclk2_clk = {
+ .halt_reg = 0x405c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x405c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_mclk2_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_mclk2_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_mclk3_clk = {
+ .halt_reg = 0x407c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x407c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_mclk3_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_mclk3_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_mclk4_clk = {
+ .halt_reg = 0x409c,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0x409c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_mclk4_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .hw = &cam_cc_mclk4_clk_src.clkr.hw,
+ },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_soc_ahb_clk = {
+ .halt_reg = 0xb140,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xb140,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_soc_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch cam_cc_sys_tmr_clk = {
+ .halt_reg = 0xb0a8,
+ .halt_check = BRANCH_HALT,
+ .clkr = {
+ .enable_reg = 0xb0a8,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "cam_cc_sys_tmr_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct gdsc bps_gdsc = {
+ .gdscr = 0x6004,
+ .pd = {
+ .name = "bps_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .flags = HW_CTRL,
+};
+
+static struct gdsc ife_0_gdsc = {
+ .gdscr = 0x9004,
+ .pd = {
+ .name = "ife_0_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc ife_1_gdsc = {
+ .gdscr = 0xa004,
+ .pd = {
+ .name = "ife_1_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc ipe_0_gdsc = {
+ .gdscr = 0x7004,
+ .pd = {
+ .name = "ipe_0_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+ .flags = HW_CTRL,
+};
+
+static struct gdsc titan_top_gdsc = {
+ .gdscr = 0xb134,
+ .pd = {
+ .name = "titan_top_gdsc",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+struct clk_hw *cam_cc_sc7180_hws[] = {
+ [CAM_CC_PLL2_OUT_EARLY] = &cam_cc_pll2_out_early.hw,
+};
+
+static struct clk_regmap *cam_cc_sc7180_clocks[] = {
+ [CAM_CC_BPS_AHB_CLK] = &cam_cc_bps_ahb_clk.clkr,
+ [CAM_CC_BPS_AREG_CLK] = &cam_cc_bps_areg_clk.clkr,
+ [CAM_CC_BPS_AXI_CLK] = &cam_cc_bps_axi_clk.clkr,
+ [CAM_CC_BPS_CLK] = &cam_cc_bps_clk.clkr,
+ [CAM_CC_BPS_CLK_SRC] = &cam_cc_bps_clk_src.clkr,
+ [CAM_CC_CAMNOC_AXI_CLK] = &cam_cc_camnoc_axi_clk.clkr,
+ [CAM_CC_CCI_0_CLK] = &cam_cc_cci_0_clk.clkr,
+ [CAM_CC_CCI_0_CLK_SRC] = &cam_cc_cci_0_clk_src.clkr,
+ [CAM_CC_CCI_1_CLK] = &cam_cc_cci_1_clk.clkr,
+ [CAM_CC_CCI_1_CLK_SRC] = &cam_cc_cci_1_clk_src.clkr,
+ [CAM_CC_CORE_AHB_CLK] = &cam_cc_core_ahb_clk.clkr,
+ [CAM_CC_CPAS_AHB_CLK] = &cam_cc_cpas_ahb_clk.clkr,
+ [CAM_CC_CPHY_RX_CLK_SRC] = &cam_cc_cphy_rx_clk_src.clkr,
+ [CAM_CC_CSI0PHYTIMER_CLK] = &cam_cc_csi0phytimer_clk.clkr,
+ [CAM_CC_CSI0PHYTIMER_CLK_SRC] = &cam_cc_csi0phytimer_clk_src.clkr,
+ [CAM_CC_CSI1PHYTIMER_CLK] = &cam_cc_csi1phytimer_clk.clkr,
+ [CAM_CC_CSI1PHYTIMER_CLK_SRC] = &cam_cc_csi1phytimer_clk_src.clkr,
+ [CAM_CC_CSI2PHYTIMER_CLK] = &cam_cc_csi2phytimer_clk.clkr,
+ [CAM_CC_CSI2PHYTIMER_CLK_SRC] = &cam_cc_csi2phytimer_clk_src.clkr,
+ [CAM_CC_CSI3PHYTIMER_CLK] = &cam_cc_csi3phytimer_clk.clkr,
+ [CAM_CC_CSI3PHYTIMER_CLK_SRC] = &cam_cc_csi3phytimer_clk_src.clkr,
+ [CAM_CC_CSIPHY0_CLK] = &cam_cc_csiphy0_clk.clkr,
+ [CAM_CC_CSIPHY1_CLK] = &cam_cc_csiphy1_clk.clkr,
+ [CAM_CC_CSIPHY2_CLK] = &cam_cc_csiphy2_clk.clkr,
+ [CAM_CC_CSIPHY3_CLK] = &cam_cc_csiphy3_clk.clkr,
+ [CAM_CC_FAST_AHB_CLK_SRC] = &cam_cc_fast_ahb_clk_src.clkr,
+ [CAM_CC_ICP_CLK] = &cam_cc_icp_clk.clkr,
+ [CAM_CC_ICP_CLK_SRC] = &cam_cc_icp_clk_src.clkr,
+ [CAM_CC_IFE_0_AXI_CLK] = &cam_cc_ife_0_axi_clk.clkr,
+ [CAM_CC_IFE_0_CLK] = &cam_cc_ife_0_clk.clkr,
+ [CAM_CC_IFE_0_CLK_SRC] = &cam_cc_ife_0_clk_src.clkr,
+ [CAM_CC_IFE_0_CPHY_RX_CLK] = &cam_cc_ife_0_cphy_rx_clk.clkr,
+ [CAM_CC_IFE_0_CSID_CLK] = &cam_cc_ife_0_csid_clk.clkr,
+ [CAM_CC_IFE_0_CSID_CLK_SRC] = &cam_cc_ife_0_csid_clk_src.clkr,
+ [CAM_CC_IFE_0_DSP_CLK] = &cam_cc_ife_0_dsp_clk.clkr,
+ [CAM_CC_IFE_1_AXI_CLK] = &cam_cc_ife_1_axi_clk.clkr,
+ [CAM_CC_IFE_1_CLK] = &cam_cc_ife_1_clk.clkr,
+ [CAM_CC_IFE_1_CLK_SRC] = &cam_cc_ife_1_clk_src.clkr,
+ [CAM_CC_IFE_1_CPHY_RX_CLK] = &cam_cc_ife_1_cphy_rx_clk.clkr,
+ [CAM_CC_IFE_1_CSID_CLK] = &cam_cc_ife_1_csid_clk.clkr,
+ [CAM_CC_IFE_1_CSID_CLK_SRC] = &cam_cc_ife_1_csid_clk_src.clkr,
+ [CAM_CC_IFE_1_DSP_CLK] = &cam_cc_ife_1_dsp_clk.clkr,
+ [CAM_CC_IFE_LITE_CLK] = &cam_cc_ife_lite_clk.clkr,
+ [CAM_CC_IFE_LITE_CLK_SRC] = &cam_cc_ife_lite_clk_src.clkr,
+ [CAM_CC_IFE_LITE_CPHY_RX_CLK] = &cam_cc_ife_lite_cphy_rx_clk.clkr,
+ [CAM_CC_IFE_LITE_CSID_CLK] = &cam_cc_ife_lite_csid_clk.clkr,
+ [CAM_CC_IFE_LITE_CSID_CLK_SRC] = &cam_cc_ife_lite_csid_clk_src.clkr,
+ [CAM_CC_IPE_0_AHB_CLK] = &cam_cc_ipe_0_ahb_clk.clkr,
+ [CAM_CC_IPE_0_AREG_CLK] = &cam_cc_ipe_0_areg_clk.clkr,
+ [CAM_CC_IPE_0_AXI_CLK] = &cam_cc_ipe_0_axi_clk.clkr,
+ [CAM_CC_IPE_0_CLK] = &cam_cc_ipe_0_clk.clkr,
+ [CAM_CC_IPE_0_CLK_SRC] = &cam_cc_ipe_0_clk_src.clkr,
+ [CAM_CC_JPEG_CLK] = &cam_cc_jpeg_clk.clkr,
+ [CAM_CC_JPEG_CLK_SRC] = &cam_cc_jpeg_clk_src.clkr,
+ [CAM_CC_LRME_CLK] = &cam_cc_lrme_clk.clkr,
+ [CAM_CC_LRME_CLK_SRC] = &cam_cc_lrme_clk_src.clkr,
+ [CAM_CC_MCLK0_CLK] = &cam_cc_mclk0_clk.clkr,
+ [CAM_CC_MCLK0_CLK_SRC] = &cam_cc_mclk0_clk_src.clkr,
+ [CAM_CC_MCLK1_CLK] = &cam_cc_mclk1_clk.clkr,
+ [CAM_CC_MCLK1_CLK_SRC] = &cam_cc_mclk1_clk_src.clkr,
+ [CAM_CC_MCLK2_CLK] = &cam_cc_mclk2_clk.clkr,
+ [CAM_CC_MCLK2_CLK_SRC] = &cam_cc_mclk2_clk_src.clkr,
+ [CAM_CC_MCLK3_CLK] = &cam_cc_mclk3_clk.clkr,
+ [CAM_CC_MCLK3_CLK_SRC] = &cam_cc_mclk3_clk_src.clkr,
+ [CAM_CC_MCLK4_CLK] = &cam_cc_mclk4_clk.clkr,
+ [CAM_CC_MCLK4_CLK_SRC] = &cam_cc_mclk4_clk_src.clkr,
+ [CAM_CC_PLL0] = &cam_cc_pll0.clkr,
+ [CAM_CC_PLL1] = &cam_cc_pll1.clkr,
+ [CAM_CC_PLL2] = &cam_cc_pll2.clkr,
+ [CAM_CC_PLL2_OUT_AUX] = &cam_cc_pll2_out_aux.clkr,
+ [CAM_CC_PLL3] = &cam_cc_pll3.clkr,
+ [CAM_CC_SLOW_AHB_CLK_SRC] = &cam_cc_slow_ahb_clk_src.clkr,
+ [CAM_CC_SOC_AHB_CLK] = &cam_cc_soc_ahb_clk.clkr,
+ [CAM_CC_SYS_TMR_CLK] = &cam_cc_sys_tmr_clk.clkr,
+};
+static struct gdsc *cam_cc_sc7180_gdscs[] = {
+ [BPS_GDSC] = &bps_gdsc,
+ [IFE_0_GDSC] = &ife_0_gdsc,
+ [IFE_1_GDSC] = &ife_1_gdsc,
+ [IPE_0_GDSC] = &ipe_0_gdsc,
+ [TITAN_TOP_GDSC] = &titan_top_gdsc,
+};
+
+static const struct regmap_config cam_cc_sc7180_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0xd028,
+ .fast_io = true,
+};
+
+static const struct qcom_cc_desc cam_cc_sc7180_desc = {
+ .config = &cam_cc_sc7180_regmap_config,
+ .clk_hws = cam_cc_sc7180_hws,
+ .num_clk_hws = ARRAY_SIZE(cam_cc_sc7180_hws),
+ .clks = cam_cc_sc7180_clocks,
+ .num_clks = ARRAY_SIZE(cam_cc_sc7180_clocks),
+ .gdscs = cam_cc_sc7180_gdscs,
+ .num_gdscs = ARRAY_SIZE(cam_cc_sc7180_gdscs),
+};
+
+static const struct of_device_id cam_cc_sc7180_match_table[] = {
+ { .compatible = "qcom,sc7180-camcc" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, cam_cc_sc7180_match_table);
+
+static int cam_cc_sc7180_probe(struct platform_device *pdev)
+{
+ struct regmap *regmap;
+ int ret;
+
+ pm_runtime_enable(&pdev->dev);
+ ret = pm_clk_create(&pdev->dev);
+ if (ret)
+ return ret;
+
+ ret = pm_clk_add(&pdev->dev, "xo");
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to acquire XO clock\n");
+ goto disable_pm_runtime;
+ }
+
+ ret = pm_clk_add(&pdev->dev, "iface");
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to acquire iface clock\n");
+ goto disable_pm_runtime;
+ }
+
+ ret = pm_clk_runtime_resume(&pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev, "pm runtime resume failed\n");
+ goto destroy_pm_clk;
+ }
+
+ regmap = qcom_cc_map(pdev, &cam_cc_sc7180_desc);
+ if (IS_ERR(regmap)) {
+ ret = PTR_ERR(regmap);
+ goto destroy_pm_clk;
+ }
+
+ clk_fabia_pll_configure(&cam_cc_pll0, regmap, &cam_cc_pll0_config);
+ clk_fabia_pll_configure(&cam_cc_pll1, regmap, &cam_cc_pll1_config);
+ clk_agera_pll_configure(&cam_cc_pll2, regmap, &cam_cc_pll2_config);
+ clk_fabia_pll_configure(&cam_cc_pll3, regmap, &cam_cc_pll3_config);
+
+ ret = qcom_cc_really_probe(pdev, &cam_cc_sc7180_desc, regmap);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register CAM CC clocks\n");
+ goto suspend_pm_runtime;
+ }
+
+suspend_pm_runtime:
+ ret = pm_clk_runtime_suspend(&pdev->dev);
+ if (ret)
+ dev_err(&pdev->dev, "pm runtime suspend failed\n");
+
+ return 0;
+
+destroy_pm_clk:
+ pm_clk_destroy(&pdev->dev);
+
+disable_pm_runtime:
+ pm_runtime_disable(&pdev->dev);
+
+ return ret;
+}
+
+static const struct dev_pm_ops cam_cc_pm_ops = {
+ SET_RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
+};
+
+static struct platform_driver cam_cc_sc7180_driver = {
+ .probe = cam_cc_sc7180_probe,
+ .driver = {
+ .name = "cam_cc-sc7180",
+ .of_match_table = cam_cc_sc7180_match_table,
+ .pm = &cam_cc_pm_ops,
+ },
+};
+
+static int __init cam_cc_sc7180_init(void)
+{
+ return platform_driver_register(&cam_cc_sc7180_driver);
+}
+subsys_initcall(cam_cc_sc7180_init);
+
+static void __exit cam_cc_sc7180_exit(void)
+{
+ platform_driver_unregister(&cam_cc_sc7180_driver);
+}
+module_exit(cam_cc_sc7180_exit);
+
+MODULE_DESCRIPTION("QTI CAM_CC SC7180 Driver");
+MODULE_LICENSE("GPL v2");
--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the Linux Foundation.
^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH v2 3/3] clk: qcom: camcc: Add camera clock controller driver for SC7180
2020-10-13 17:11 ` [PATCH v2 3/3] clk: qcom: camcc: Add camera clock controller driver for SC7180 Taniya Das
@ 2020-10-14 1:59 ` Stephen Boyd
2020-10-16 18:40 ` Taniya Das
0 siblings, 1 reply; 11+ messages in thread
From: Stephen Boyd @ 2020-10-14 1:59 UTC (permalink / raw)
To: Michael Turquette, Taniya Das
Cc: David Brown, Rajendra Nayak, linux-arm-msm, linux-soc, linux-clk,
linux-kernel, Andy Gross, devicetree, robh, robh+dt, Taniya Das
Quoting Taniya Das (2020-10-13 10:11:50)
> diff --git a/drivers/clk/qcom/camcc-sc7180.c b/drivers/clk/qcom/camcc-sc7180.c
> new file mode 100644
> index 0000000..e954d21
> --- /dev/null
> +++ b/drivers/clk/qcom/camcc-sc7180.c
> @@ -0,0 +1,1737 @@
[...]
> +
> +enum {
> + P_BI_TCXO,
> + P_CAM_CC_PLL0_OUT_EVEN,
> + P_CAM_CC_PLL1_OUT_EVEN,
> + P_CAM_CC_PLL2_OUT_AUX,
> + P_CAM_CC_PLL2_OUT_EARLY,
> + P_CAM_CC_PLL3_OUT_MAIN,
> + P_CORE_BI_PLL_TEST_SE,
> +};
> +
> +static struct pll_vco agera_vco[] = {
Can this be const?
> + { 600000000, 3300000000, 0 },
> +};
> +
> +static struct pll_vco fabia_vco[] = {
Can this be const?
> + { 249600000, 2000000000, 0 },
> +};
> +
[...]
> +
> +static int cam_cc_sc7180_probe(struct platform_device *pdev)
> +{
> + struct regmap *regmap;
> + int ret;
> +
> + pm_runtime_enable(&pdev->dev);
> + ret = pm_clk_create(&pdev->dev);
> + if (ret)
> + return ret;
> +
> + ret = pm_clk_add(&pdev->dev, "xo");
> + if (ret < 0) {
> + dev_err(&pdev->dev, "Failed to acquire XO clock\n");
> + goto disable_pm_runtime;
> + }
> +
> + ret = pm_clk_add(&pdev->dev, "iface");
> + if (ret < 0) {
> + dev_err(&pdev->dev, "Failed to acquire iface clock\n");
> + goto disable_pm_runtime;
> + }
> +
> + ret = pm_clk_runtime_resume(&pdev->dev);
> + if (ret) {
> + dev_err(&pdev->dev, "pm runtime resume failed\n");
> + goto destroy_pm_clk;
> + }
> +
> + regmap = qcom_cc_map(pdev, &cam_cc_sc7180_desc);
> + if (IS_ERR(regmap)) {
> + ret = PTR_ERR(regmap);
> + goto destroy_pm_clk;
> + }
> +
> + clk_fabia_pll_configure(&cam_cc_pll0, regmap, &cam_cc_pll0_config);
> + clk_fabia_pll_configure(&cam_cc_pll1, regmap, &cam_cc_pll1_config);
> + clk_agera_pll_configure(&cam_cc_pll2, regmap, &cam_cc_pll2_config);
> + clk_fabia_pll_configure(&cam_cc_pll3, regmap, &cam_cc_pll3_config);
> +
> + ret = qcom_cc_really_probe(pdev, &cam_cc_sc7180_desc, regmap);
> + if (ret) {
> + dev_err(&pdev->dev, "Failed to register CAM CC clocks\n");
> + goto suspend_pm_runtime;
ret is non-zero here
> + }
> +
> +suspend_pm_runtime:
> + ret = pm_clk_runtime_suspend(&pdev->dev);
But then it is overwritten here.
> + if (ret)
> + dev_err(&pdev->dev, "pm runtime suspend failed\n");
> +
> + return 0;
And we return 0 when there was a failure to probe the clks?
> +
> +destroy_pm_clk:
> + pm_clk_destroy(&pdev->dev);
> +
> +disable_pm_runtime:
> + pm_runtime_disable(&pdev->dev);
> +
> + return ret;
> +}
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v2 1/3] clk: qcom: clk-alpha-pll: Add support for controlling Agera PLLs
2020-10-13 17:11 ` [PATCH v2 1/3] clk: qcom: clk-alpha-pll: Add support for controlling Agera PLLs Taniya Das
@ 2020-10-14 2:07 ` Stephen Boyd
2020-10-16 18:38 ` Taniya Das
0 siblings, 1 reply; 11+ messages in thread
From: Stephen Boyd @ 2020-10-14 2:07 UTC (permalink / raw)
To: Michael Turquette, Taniya Das
Cc: David Brown, Rajendra Nayak, linux-arm-msm, linux-soc, linux-clk,
linux-kernel, Andy Gross, devicetree, robh, robh+dt, Taniya Das
Quoting Taniya Das (2020-10-13 10:11:48)
> diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
> index 26139ef..17e1fc0 100644
> --- a/drivers/clk/qcom/clk-alpha-pll.c
> +++ b/drivers/clk/qcom/clk-alpha-pll.c
> @@ -1561,3 +1571,73 @@ const struct clk_ops clk_alpha_pll_postdiv_lucid_ops = {
> .set_rate = clk_alpha_pll_postdiv_fabia_set_rate,
> };
> EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_lucid_ops);
> +
> +void clk_agera_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
> + const struct alpha_pll_config *config)
> +{
> + if (config->l)
> + regmap_write(regmap, PLL_L_VAL(pll), config->l);
Maybe make a helper function for this too. That way we can't mix up the
if condition with the value in the write.
clk_alpha_pll_write_config(regmap, PLL_L_VAL(pll), config->l);
static void clk_alpha_pll_write_config(struct regmap *regmap,
unsigned int reg,
unsigned int val) {
if (val)
regmap_write(regmap, reg, val);
}
and how are we so lucky that zero isn't a value that we may need to
write?
> +
> + if (config->alpha)
> + regmap_write(regmap, PLL_ALPHA_VAL(pll), config->alpha);
> +
> + if (config->user_ctl_val)
> + regmap_write(regmap, PLL_USER_CTL(pll), config->user_ctl_val);
> +
> + if (config->config_ctl_val)
> + regmap_write(regmap, PLL_CONFIG_CTL(pll),
> + config->config_ctl_val);
> +
> + if (config->config_ctl_hi_val)
> + regmap_write(regmap, PLL_CONFIG_CTL_U(pll),
> + config->config_ctl_hi_val);
> +
> + if (config->test_ctl_val)
> + regmap_write(regmap, PLL_TEST_CTL(pll),
> + config->test_ctl_val);
> +
> + if (config->test_ctl_hi_val)
> + regmap_write(regmap, PLL_TEST_CTL_U(pll),
> + config->test_ctl_hi_val);
> +}
> +EXPORT_SYMBOL_GPL(clk_agera_pll_configure);
> +
> +static int clk_alpha_pll_agera_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long prate)
> +{
> + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
> + u32 l, alpha_width = pll_alpha_width(pll);
> + unsigned long rrate, max = rate + PLL_RATE_MARGIN;
> + u64 a;
> +
> + rrate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
> +
> + /*
> + * Due to limited number of bits for fractional rate programming, the
> + * rounded up rate could be marginally higher than the requested rate.
> + */
> + if (rrate > (rate + PLL_RATE_MARGIN) || rrate < rate) {
> + pr_err("%s: Rounded rate %lu not within range [%lu, %lu)\n",
> + clk_hw_get_name(hw), rrate, rate, max);
> + return -EINVAL;
> + }
Can this be extracted into a helper function?
> +
> + /* change L_VAL without having to go through the power on sequence */
> + regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
> + regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
> +
> + if (clk_hw_is_enabled(hw))
> + return wait_for_pll_enable_lock(pll);
> +
> + return 0;
> +}
> +
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v2 2/3] dt-bindings: clock: Add YAML schemas for the QCOM Camera clock bindings.
2020-10-13 17:11 ` [PATCH v2 2/3] dt-bindings: clock: Add YAML schemas for the QCOM Camera clock bindings Taniya Das
@ 2020-10-14 2:09 ` Stephen Boyd
2020-10-16 18:39 ` Taniya Das
2020-10-16 17:25 ` Rob Herring
1 sibling, 1 reply; 11+ messages in thread
From: Stephen Boyd @ 2020-10-14 2:09 UTC (permalink / raw)
To: Michael Turquette, Taniya Das
Cc: David Brown, Rajendra Nayak, linux-arm-msm, linux-soc, linux-clk,
linux-kernel, Andy Gross, devicetree, robh, robh+dt, Taniya Das
Quoting Taniya Das (2020-10-13 10:11:49)
> diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
> new file mode 100644
> index 0000000..07bd38e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
> @@ -0,0 +1,73 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/qcom,sc7180-camcc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Camera Clock & Reset Controller Binding for SC7180
> +
> +maintainers:
> + - Taniya Das <tdas@codeaurora.org>
> +
> +description: |
> + Qualcomm camera clock control module which supports the clocks, resets and
> + power domains on SC7180.
> +
> + See also:
> + - dt-bindings/clock/qcom,camcc-sc7180.h.
Maybe just
- dt-bindings/clock/qcom,camcc-sc7180.h
so that us copy/pasters don't have to delete anything.
> +
> +properties:
> + compatible:
> + const: qcom,sc7180-camcc
> +
> + clocks:
> + items:
> + - description: Board XO source
> + - description: Camera_ahb clock from GCC
> + - description: Camera XO clock from GCC
> +
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v2 2/3] dt-bindings: clock: Add YAML schemas for the QCOM Camera clock bindings.
2020-10-13 17:11 ` [PATCH v2 2/3] dt-bindings: clock: Add YAML schemas for the QCOM Camera clock bindings Taniya Das
2020-10-14 2:09 ` Stephen Boyd
@ 2020-10-16 17:25 ` Rob Herring
1 sibling, 0 replies; 11+ messages in thread
From: Rob Herring @ 2020-10-16 17:25 UTC (permalink / raw)
To: Taniya Das
Cc: robh+dt, Michael Turquette, David Brown, Andy Gross, linux-clk,
linux-arm-msm, Rajendra Nayak, linux-kernel, linux-soc,
devicetree, Stephen Boyd
On Tue, 13 Oct 2020 22:41:49 +0530, Taniya Das wrote:
> The Camera Subsystem clock provider have a bunch of generic properties
> that are needed in a device tree. Add a YAML schemas for those.
>
> Add clock ids for camera clocks which are required to bring the camera
> subsystem out of reset.
>
> Signed-off-by: Taniya Das <tdas@codeaurora.org>
> ---
> .../bindings/clock/qcom,sc7180-camcc.yaml | 73 +++++++++++++
> include/dt-bindings/clock/qcom,camcc-sc7180.h | 121 +++++++++++++++++++++
> 2 files changed, 194 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
> create mode 100644 include/dt-bindings/clock/qcom,camcc-sc7180.h
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v2 1/3] clk: qcom: clk-alpha-pll: Add support for controlling Agera PLLs
2020-10-14 2:07 ` Stephen Boyd
@ 2020-10-16 18:38 ` Taniya Das
0 siblings, 0 replies; 11+ messages in thread
From: Taniya Das @ 2020-10-16 18:38 UTC (permalink / raw)
To: Stephen Boyd, Michael Turquette
Cc: David Brown, Rajendra Nayak, linux-arm-msm, linux-soc, linux-clk,
linux-kernel, Andy Gross, devicetree, robh, robh+dt
Thanks Stephen for the review comments.
On 10/14/2020 7:37 AM, Stephen Boyd wrote:
> Quoting Taniya Das (2020-10-13 10:11:48)
>> diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
>> index 26139ef..17e1fc0 100644
>> --- a/drivers/clk/qcom/clk-alpha-pll.c
>> +++ b/drivers/clk/qcom/clk-alpha-pll.c
>> @@ -1561,3 +1571,73 @@ const struct clk_ops clk_alpha_pll_postdiv_lucid_ops = {
>> .set_rate = clk_alpha_pll_postdiv_fabia_set_rate,
>> };
>> EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_lucid_ops);
>> +
>> +void clk_agera_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
>> + const struct alpha_pll_config *config)
>> +{
>> + if (config->l)
>> + regmap_write(regmap, PLL_L_VAL(pll), config->l);
>
> Maybe make a helper function for this too. That way we can't mix up the
> if condition with the value in the write.
>
Sure, I will add a helper function.
> clk_alpha_pll_write_config(regmap, PLL_L_VAL(pll), config->l);
>
> static void clk_alpha_pll_write_config(struct regmap *regmap,
> unsigned int reg,
> unsigned int val) {
> if (val)
> regmap_write(regmap, reg, val);
> }
>
> and how are we so lucky that zero isn't a value that we may need to
> write?
>
>> +
>> + if (config->alpha)
>> + regmap_write(regmap, PLL_ALPHA_VAL(pll), config->alpha);
>> +
>> + if (config->user_ctl_val)
>> + regmap_write(regmap, PLL_USER_CTL(pll), config->user_ctl_val);
>> +
>> + if (config->config_ctl_val)
>> + regmap_write(regmap, PLL_CONFIG_CTL(pll),
>> + config->config_ctl_val);
>> +
>> + if (config->config_ctl_hi_val)
>> + regmap_write(regmap, PLL_CONFIG_CTL_U(pll),
>> + config->config_ctl_hi_val);
>> +
>> + if (config->test_ctl_val)
>> + regmap_write(regmap, PLL_TEST_CTL(pll),
>> + config->test_ctl_val);
>> +
>> + if (config->test_ctl_hi_val)
>> + regmap_write(regmap, PLL_TEST_CTL_U(pll),
>> + config->test_ctl_hi_val);
>> +}
>> +EXPORT_SYMBOL_GPL(clk_agera_pll_configure);
>> +
>> +static int clk_alpha_pll_agera_set_rate(struct clk_hw *hw, unsigned long rate,
>> + unsigned long prate)
>> +{
>> + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
>> + u32 l, alpha_width = pll_alpha_width(pll);
>> + unsigned long rrate, max = rate + PLL_RATE_MARGIN;
>> + u64 a;
>> +
>> + rrate = alpha_pll_round_rate(rate, prate, &l, &a, alpha_width);
>> +
>> + /*
>> + * Due to limited number of bits for fractional rate programming, the
>> + * rounded up rate could be marginally higher than the requested rate.
>> + */
>> + if (rrate > (rate + PLL_RATE_MARGIN) || rrate < rate) {
>> + pr_err("%s: Rounded rate %lu not within range [%lu, %lu)\n",
>> + clk_hw_get_name(hw), rrate, rate, max);
>> + return -EINVAL;
>> + }
>
> Can this be extracted into a helper function?
>
Yes, I will add this too.
>> +
>> + /* change L_VAL without having to go through the power on sequence */
>> + regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
>> + regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
>> +
>> + if (clk_hw_is_enabled(hw))
>> + return wait_for_pll_enable_lock(pll);
>> +
>> + return 0;
>> +}
>> +
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.
--
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v2 2/3] dt-bindings: clock: Add YAML schemas for the QCOM Camera clock bindings.
2020-10-14 2:09 ` Stephen Boyd
@ 2020-10-16 18:39 ` Taniya Das
0 siblings, 0 replies; 11+ messages in thread
From: Taniya Das @ 2020-10-16 18:39 UTC (permalink / raw)
To: Stephen Boyd, Michael Turquette
Cc: David Brown, Rajendra Nayak, linux-arm-msm, linux-soc, linux-clk,
linux-kernel, Andy Gross, devicetree, robh, robh+dt
Thanks for your review Stephen.
On 10/14/2020 7:39 AM, Stephen Boyd wrote:
> Quoting Taniya Das (2020-10-13 10:11:49)
>> diff --git a/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
>> new file mode 100644
>> index 0000000..07bd38e
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/clock/qcom,sc7180-camcc.yaml
>> @@ -0,0 +1,73 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/clock/qcom,sc7180-camcc.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm Camera Clock & Reset Controller Binding for SC7180
>> +
>> +maintainers:
>> + - Taniya Das <tdas@codeaurora.org>
>> +
>> +description: |
>> + Qualcomm camera clock control module which supports the clocks, resets and
>> + power domains on SC7180.
>> +
>> + See also:
>> + - dt-bindings/clock/qcom,camcc-sc7180.h.
>
> Maybe just
>
> - dt-bindings/clock/qcom,camcc-sc7180.h
>
> so that us copy/pasters don't have to delete anything.
>
Will be fixed in the next patch.
>> +
>> +properties:
>> + compatible:
>> + const: qcom,sc7180-camcc
>> +
>> + clocks:
>> + items:
>> + - description: Board XO source
>> + - description: Camera_ahb clock from GCC
>> + - description: Camera XO clock from GCC
>> +
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.
--
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH v2 3/3] clk: qcom: camcc: Add camera clock controller driver for SC7180
2020-10-14 1:59 ` Stephen Boyd
@ 2020-10-16 18:40 ` Taniya Das
0 siblings, 0 replies; 11+ messages in thread
From: Taniya Das @ 2020-10-16 18:40 UTC (permalink / raw)
To: Stephen Boyd, Michael Turquette
Cc: David Brown, Rajendra Nayak, linux-arm-msm, linux-soc, linux-clk,
linux-kernel, Andy Gross, devicetree, robh, robh+dt
Thanks for your review Stephen.
On 10/14/2020 7:29 AM, Stephen Boyd wrote:
> Quoting Taniya Das (2020-10-13 10:11:50)
>> diff --git a/drivers/clk/qcom/camcc-sc7180.c b/drivers/clk/qcom/camcc-sc7180.c
>> new file mode 100644
>> index 0000000..e954d21
>> --- /dev/null
>> +++ b/drivers/clk/qcom/camcc-sc7180.c
>> @@ -0,0 +1,1737 @@
> [...]
>> +
>> +enum {
>> + P_BI_TCXO,
>> + P_CAM_CC_PLL0_OUT_EVEN,
>> + P_CAM_CC_PLL1_OUT_EVEN,
>> + P_CAM_CC_PLL2_OUT_AUX,
>> + P_CAM_CC_PLL2_OUT_EARLY,
>> + P_CAM_CC_PLL3_OUT_MAIN,
>> + P_CORE_BI_PLL_TEST_SE,
>> +};
>> +
>> +static struct pll_vco agera_vco[] = {
>
> Can this be const?
>
>> + { 600000000, 3300000000, 0 },
>> +};
>> +
>> +static struct pll_vco fabia_vco[] = {
>
> Can this be const?
>
>> + { 249600000, 2000000000, 0 },
>> +};
>> +
> [...]
Will take care of the above in the next patch.
>> +
>> +static int cam_cc_sc7180_probe(struct platform_device *pdev)
>> +{
>> + struct regmap *regmap;
>> + int ret;
>> +
>> + pm_runtime_enable(&pdev->dev);
>> + ret = pm_clk_create(&pdev->dev);
>> + if (ret)
>> + return ret;
>> +
>> + ret = pm_clk_add(&pdev->dev, "xo");
>> + if (ret < 0) {
>> + dev_err(&pdev->dev, "Failed to acquire XO clock\n");
>> + goto disable_pm_runtime;
>> + }
>> +
>> + ret = pm_clk_add(&pdev->dev, "iface");
>> + if (ret < 0) {
>> + dev_err(&pdev->dev, "Failed to acquire iface clock\n");
>> + goto disable_pm_runtime;
>> + }
>> +
>> + ret = pm_clk_runtime_resume(&pdev->dev);
>> + if (ret) {
>> + dev_err(&pdev->dev, "pm runtime resume failed\n");
>> + goto destroy_pm_clk;
>> + }
>> +
>> + regmap = qcom_cc_map(pdev, &cam_cc_sc7180_desc);
>> + if (IS_ERR(regmap)) {
>> + ret = PTR_ERR(regmap);
>> + goto destroy_pm_clk;
>> + }
>> +
>> + clk_fabia_pll_configure(&cam_cc_pll0, regmap, &cam_cc_pll0_config);
>> + clk_fabia_pll_configure(&cam_cc_pll1, regmap, &cam_cc_pll1_config);
>> + clk_agera_pll_configure(&cam_cc_pll2, regmap, &cam_cc_pll2_config);
>> + clk_fabia_pll_configure(&cam_cc_pll3, regmap, &cam_cc_pll3_config);
>> +
>> + ret = qcom_cc_really_probe(pdev, &cam_cc_sc7180_desc, regmap);
>> + if (ret) {
>> + dev_err(&pdev->dev, "Failed to register CAM CC clocks\n");
>> + goto suspend_pm_runtime;
>
> ret is non-zero here
>
>> + }
>> +
>> +suspend_pm_runtime:
>> + ret = pm_clk_runtime_suspend(&pdev->dev);
>
> But then it is overwritten here.
>
>> + if (ret)
>> + dev_err(&pdev->dev, "pm runtime suspend failed\n");
>> +
>> + return 0;
>
> And we return 0 when there was a failure to probe the clks?
>
I will clean the error path in the next patch.
>> +
>> +destroy_pm_clk:
>> + pm_clk_destroy(&pdev->dev);
>> +
>> +disable_pm_runtime:
>> + pm_runtime_disable(&pdev->dev);
>> +
>> + return ret;
>> +}
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.
--
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2020-10-16 18:40 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-13 17:11 [PATCH v2 0/3] Add Camera clock controller driver for SC7180 Taniya Das
2020-10-13 17:11 ` [PATCH v2 1/3] clk: qcom: clk-alpha-pll: Add support for controlling Agera PLLs Taniya Das
2020-10-14 2:07 ` Stephen Boyd
2020-10-16 18:38 ` Taniya Das
2020-10-13 17:11 ` [PATCH v2 2/3] dt-bindings: clock: Add YAML schemas for the QCOM Camera clock bindings Taniya Das
2020-10-14 2:09 ` Stephen Boyd
2020-10-16 18:39 ` Taniya Das
2020-10-16 17:25 ` Rob Herring
2020-10-13 17:11 ` [PATCH v2 3/3] clk: qcom: camcc: Add camera clock controller driver for SC7180 Taniya Das
2020-10-14 1:59 ` Stephen Boyd
2020-10-16 18:40 ` Taniya Das
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).