LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Sibi Sankar <sibis@codeaurora.org>
To: bjorn.andersson@linaro.org
Cc: ohad@wizery.com, linux-arm-msm@vger.kernel.org,
	linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org,
	agross@kernel.org, evgreen@chromium.org,
	Sibi Sankar <sibis@codeaurora.org>
Subject: [PATCH 2/2] remoteproc: qcom_q6v5_mss: map/unmap MBA region before/after use
Date: Wed,  4 Nov 2020 12:33:42 +0530
Message-ID: <1604473422-29639-2-git-send-email-sibis@codeaurora.org> (raw)
In-Reply-To: <1604473422-29639-1-git-send-email-sibis@codeaurora.org>

The application processor accessing the MBA region after assigning it to
the remote Q6 would lead to an XPU violation. Fix this by un-mapping the
MBA region post firmware copy and MBA text log dumps.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
 drivers/remoteproc/qcom_q6v5_mss.c | 37 ++++++++++++++++++++++---------------
 1 file changed, 22 insertions(+), 15 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 2c866b6da23c..1b4a34325788 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -189,7 +189,6 @@ struct q6v5 {
 	size_t total_dump_size;
 
 	phys_addr_t mba_phys;
-	void *mba_region;
 	size_t mba_size;
 	size_t dp_size;
 
@@ -408,7 +407,7 @@ static int q6v5_xfer_mem_ownership(struct q6v5 *qproc, int *current_perm,
 				   current_perm, next, perms);
 }
 
-static void q6v5_debug_policy_load(struct q6v5 *qproc)
+static void q6v5_debug_policy_load(struct q6v5 *qproc, void *ptr)
 {
 	const struct firmware *dp_fw;
 
@@ -416,7 +415,7 @@ static void q6v5_debug_policy_load(struct q6v5 *qproc)
 		return;
 
 	if (SZ_1M + dp_fw->size <= qproc->mba_size) {
-		memcpy(qproc->mba_region + SZ_1M, dp_fw->data, dp_fw->size);
+		memcpy(ptr + SZ_1M, dp_fw->data, dp_fw->size);
 		qproc->dp_size = dp_fw->size;
 	}
 
@@ -426,6 +425,7 @@ static void q6v5_debug_policy_load(struct q6v5 *qproc)
 static int q6v5_load(struct rproc *rproc, const struct firmware *fw)
 {
 	struct q6v5 *qproc = rproc->priv;
+	void *ptr;
 
 	/* MBA is restricted to a maximum size of 1M */
 	if (fw->size > qproc->mba_size || fw->size > SZ_1M) {
@@ -433,8 +433,16 @@ static int q6v5_load(struct rproc *rproc, const struct firmware *fw)
 		return -EINVAL;
 	}
 
-	memcpy(qproc->mba_region, fw->data, fw->size);
-	q6v5_debug_policy_load(qproc);
+	ptr = memremap(qproc->mba_phys, qproc->mba_size, MEMREMAP_WC);
+	if (!ptr) {
+		dev_err(qproc->dev, "unable to map memory region: %pa+%zx\n",
+			&qproc->mba_phys, qproc->mba_size);
+		return -EBUSY;
+	}
+
+	memcpy(ptr, fw->data, fw->size);
+	q6v5_debug_policy_load(qproc, ptr);
+	memunmap(ptr);
 
 	return 0;
 }
@@ -541,6 +549,7 @@ static void q6v5_dump_mba_logs(struct q6v5 *qproc)
 {
 	struct rproc *rproc = qproc->rproc;
 	void *data;
+	void *ptr;
 
 	if (!qproc->has_mba_logs)
 		return;
@@ -549,12 +558,16 @@ static void q6v5_dump_mba_logs(struct q6v5 *qproc)
 				    qproc->mba_size))
 		return;
 
-	data = vmalloc(MBA_LOG_SIZE);
-	if (!data)
+	ptr = memremap(qproc->mba_phys, qproc->mba_size, MEMREMAP_WC);
+	if (!ptr)
 		return;
 
-	memcpy(data, qproc->mba_region, MBA_LOG_SIZE);
-	dev_coredumpv(&rproc->dev, data, MBA_LOG_SIZE, GFP_KERNEL);
+	data = vmalloc(MBA_LOG_SIZE);
+	if (data) {
+		memcpy(data, ptr, MBA_LOG_SIZE);
+		dev_coredumpv(&rproc->dev, data, MBA_LOG_SIZE, GFP_KERNEL);
+	}
+	memunmap(ptr);
 }
 
 static int q6v5proc_reset(struct q6v5 *qproc)
@@ -1605,12 +1618,6 @@ static int q6v5_alloc_memory_region(struct q6v5 *qproc)
 
 	qproc->mba_phys = r.start;
 	qproc->mba_size = resource_size(&r);
-	qproc->mba_region = devm_ioremap_wc(qproc->dev, qproc->mba_phys, qproc->mba_size);
-	if (!qproc->mba_region) {
-		dev_err(qproc->dev, "unable to map memory region: %pa+%zx\n",
-			&r.start, qproc->mba_size);
-		return -EBUSY;
-	}
 
 	if (!child) {
 		node = of_parse_phandle(qproc->dev->of_node,
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  reply index

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-04  7:03 [PATCH 1/2] remoteproc: qcom_q6v5_mss: Replace ioremap with memremap Sibi Sankar
2020-11-04  7:03 ` Sibi Sankar [this message]
2020-11-24 16:22   ` [PATCH 2/2] remoteproc: qcom_q6v5_mss: map/unmap MBA region before/after use Bjorn Andersson
2020-11-18 17:58 ` [PATCH 1/2] remoteproc: qcom_q6v5_mss: Replace ioremap with memremap Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1604473422-29639-2-git-send-email-sibis@codeaurora.org \
    --to=sibis@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=evgreen@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=ohad@wizery.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git