[PATCH net-next] net: dsa: b53: Add debug prints in b53_vlan_enable()

[PATCH net-next] net: dsa: b53: Add debug prints in b53_vlan_enable()

[Florian Fainelli]

Having dynamic debug prints in b53_vlan_enable() has been helpful to
uncover a recent but update the function to indicate the port being
configured (or -1 for initial setup) and include the global VLAN enabled
and VLAN filtering enable status.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/net/dsa/b53/b53_common.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index a162499bcafc..9bd51c2a51d2 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -349,7 +349,7 @@ static void b53_set_forwarding(struct b53_device *dev, int enable)
 	b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt);
 }
 
-static void b53_enable_vlan(struct b53_device *dev, bool enable,
+static void b53_enable_vlan(struct b53_device *dev, int port, bool enable,
 			    bool enable_filtering)
 {
 	u8 mgmt, vc0, vc1, vc4 = 0, vc5;
@@ -431,6 +431,9 @@ static void b53_enable_vlan(struct b53_device *dev, bool enable,
 	b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt);
 
 	dev->vlan_enabled = enable;
+
+	dev_dbg(dev->dev, "Port %d VLAN enabled: %d, filtering: %d\n",
+		port, enable, enable_filtering);
 }
 
 static int b53_set_jumbo(struct b53_device *dev, bool enable, bool allow_10_100)
@@ -743,7 +746,7 @@ int b53_configure_vlan(struct dsa_switch *ds)
 		b53_do_vlan_op(dev, VTA_CMD_CLEAR);
 	}
 
-	b53_enable_vlan(dev, dev->vlan_enabled, ds->vlan_filtering);
+	b53_enable_vlan(dev, -1, dev->vlan_enabled, ds->vlan_filtering);
 
 	b53_for_each_port(dev, i)
 		b53_write16(dev, B53_VLAN_PAGE,
@@ -1429,7 +1432,7 @@ int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering,
 {
 	struct b53_device *dev = ds->priv;
 
-	b53_enable_vlan(dev, dev->vlan_enabled, vlan_filtering);
+	b53_enable_vlan(dev, port, dev->vlan_enabled, vlan_filtering);
 
 	return 0;
 }
@@ -1454,7 +1457,7 @@ static int b53_vlan_prepare(struct dsa_switch *ds, int port,
 	if (vlan->vid >= dev->num_vlans)
 		return -ERANGE;
 
-	b53_enable_vlan(dev, true, ds->vlan_filtering);
+	b53_enable_vlan(dev, port, true, ds->vlan_filtering);
 
 	return 0;
 }
-- 
2.25.1

Re: [PATCH net-next] net: dsa: b53: Add debug prints in b53_vlan_enable()

[Andrew Lunn]

On Wed, Mar 10, 2021 at 10:52:26AM -0800, Florian Fainelli wrote:
> Having dynamic debug prints in b53_vlan_enable() has been helpful to
> uncover a recent but update the function to indicate the port being
> configured (or -1 for initial setup) and include the global VLAN enabled
> and VLAN filtering enable status.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew

Re: [PATCH net-next] net: dsa: b53: Add debug prints in b53_vlan_enable()

[patchwork-bot+netdevbpf]

Hello:

This patch was applied to netdev/net-next.git (refs/heads/master):

On Wed, 10 Mar 2021 10:52:26 -0800 you wrote:
> Having dynamic debug prints in b53_vlan_enable() has been helpful to
> uncover a recent but update the function to indicate the port being
> configured (or -1 for initial setup) and include the global VLAN enabled
> and VLAN filtering enable status.
> 
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> 
> [...]

Here is the summary with links:
  - [net-next] net: dsa: b53: Add debug prints in b53_vlan_enable()
    https://git.kernel.org/netdev/net-next/c/ee47ed08d75e

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html