linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v3] ASoC: Intel: sof_rt5682: Add ALC1015Q-VB speaker amp support
@ 2021-03-17 11:08 Brent Lu
  2021-03-17 14:02 ` Pierre-Louis Bossart
  2021-03-18 18:36 ` Mark Brown
  0 siblings, 2 replies; 8+ messages in thread
From: Brent Lu @ 2021-03-17 11:08 UTC (permalink / raw)
  To: alsa-devel
  Cc: Oder Chiou, Liam Girdwood, Mark Brown, Jaroslav Kysela,
	Takashi Iwai, Cezary Rojewski, Pierre-Louis Bossart, Jie Yang,
	Kai Vehmanen, Guennadi Liakhovetski, Rander Wang, Brent Lu,
	Yong Zhi, Libin Yang, Ranjani Sridharan, Sathyanarayana Nujella,
	Dharageswari R, Kuninori Morimoto, Fred Oh, Tzung-Bi Shih,
	linux-kernel

This patch adds jsl_rt5682_rt1015p which supports the RT5682 headset
codec and ALC1015Q-VB speaker amplifier combination on JasperLake
platform.

This driver also supports ALC1015Q-CG if running in auto-mode.
Following table shows the audio interface support of the two
amplifiers.

          | ALC1015Q-CG | ALC1015Q-VB
=====================================
I2C       | Yes         | No
Auto-mode | 48K, 64fs   | 16k, 32fs
                        | 48k, 32fs
                        | 48k, 64fs

Signed-off-by: Brent Lu <brent.lu@intel.com>
---
 sound/soc/intel/boards/Kconfig                |   1 +
 sound/soc/intel/boards/sof_realtek_common.c   | 105 ++++++++++++++++++
 sound/soc/intel/boards/sof_realtek_common.h   |   7 ++
 sound/soc/intel/boards/sof_rt5682.c           |  19 +++-
 .../intel/common/soc-acpi-intel-jsl-match.c   |  13 +++
 5 files changed, 143 insertions(+), 2 deletions(-)

diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
index d1d28129a32b..58379393b8e4 100644
--- a/sound/soc/intel/boards/Kconfig
+++ b/sound/soc/intel/boards/Kconfig
@@ -457,6 +457,7 @@ config SND_SOC_INTEL_SOF_RT5682_MACH
 	select SND_SOC_MAX98373_I2C
 	select SND_SOC_RT1011
 	select SND_SOC_RT1015
+	select SND_SOC_RT1015P
 	select SND_SOC_RT5682_I2C
 	select SND_SOC_DMIC
 	select SND_SOC_HDAC_HDMI
diff --git a/sound/soc/intel/boards/sof_realtek_common.c b/sound/soc/intel/boards/sof_realtek_common.c
index f3cf73c620ba..2ec34f8df9e1 100644
--- a/sound/soc/intel/boards/sof_realtek_common.c
+++ b/sound/soc/intel/boards/sof_realtek_common.c
@@ -7,6 +7,7 @@
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
 #include <sound/soc.h>
+#include <sound/soc-acpi.h>
 #include <sound/soc-dai.h>
 #include <sound/soc-dapm.h>
 #include <uapi/sound/asound.h>
@@ -136,3 +137,107 @@ void sof_rt1011_codec_conf(struct snd_soc_card *card)
 	card->codec_conf = rt1011_codec_confs;
 	card->num_configs = ARRAY_SIZE(rt1011_codec_confs);
 }
+
+/*
+ * rt1015:  i2c mode driver for ALC1015 and ALC1015Q
+ * rt1015p: auto-mode driver for ALC1015, ALC1015Q, and ALC1015Q-VB
+ *
+ * For stereo output, there are always two amplifiers on the board.
+ * However, the ACPI implements only one device instance (UID=0) if they
+ * are sharing the same enable pin. The code will detect the number of
+ * device instance and use corresponding DAPM structures for
+ * initialization.
+ */
+static const struct snd_soc_dapm_route rt1015p_1dev_dapm_routes[] = {
+	/* speaker */
+	{ "Left Spk", NULL, "Speaker" },
+	{ "Right Spk", NULL, "Speaker" },
+};
+
+static const struct snd_soc_dapm_route rt1015p_2dev_dapm_routes[] = {
+	/* speaker */
+	{ "Left Spk", NULL, "Left Speaker" },
+	{ "Right Spk", NULL, "Right Speaker" },
+};
+
+static struct snd_soc_codec_conf rt1015p_codec_confs[] = {
+	{
+		.dlc = COMP_CODEC_CONF(RT1015P_DEV0_NAME),
+		.name_prefix = "Left",
+	},
+	{
+		.dlc = COMP_CODEC_CONF(RT1015P_DEV1_NAME),
+		.name_prefix = "Right",
+	},
+};
+
+static struct snd_soc_dai_link_component rt1015p_dai_link_components[] = {
+	{
+		.name = RT1015P_DEV0_NAME,
+		.dai_name = RT1015P_CODEC_DAI,
+	},
+	{
+		.name = RT1015P_DEV1_NAME,
+		.dai_name = RT1015P_CODEC_DAI,
+	},
+};
+
+static int rt1015p_get_num_codecs(void)
+{
+	static int dev_num;
+
+	if (dev_num)
+		return dev_num;
+
+	if (!acpi_dev_present("RTL1015", "1", -1))
+		dev_num = 1;
+	else
+		dev_num = 2;
+
+	return dev_num;
+}
+
+static int rt1015p_hw_params(struct snd_pcm_substream *substream,
+			     struct snd_pcm_hw_params *params)
+{
+	/* reserved for debugging purpose */
+
+	return 0;
+}
+
+static const struct snd_soc_ops rt1015p_ops = {
+	.hw_params = rt1015p_hw_params,
+};
+
+static int rt1015p_init(struct snd_soc_pcm_runtime *rtd)
+{
+	struct snd_soc_card *card = rtd->card;
+	int ret;
+
+	if (rt1015p_get_num_codecs() == 1)
+		ret = snd_soc_dapm_add_routes(&card->dapm, rt1015p_1dev_dapm_routes,
+					      ARRAY_SIZE(rt1015p_1dev_dapm_routes));
+	else
+		ret = snd_soc_dapm_add_routes(&card->dapm, rt1015p_2dev_dapm_routes,
+					      ARRAY_SIZE(rt1015p_2dev_dapm_routes));
+	if (ret)
+		dev_err(rtd->dev, "Speaker map addition failed: %d\n", ret);
+	return ret;
+}
+
+void sof_rt1015p_dai_link(struct snd_soc_dai_link *link)
+{
+	link->codecs = rt1015p_dai_link_components;
+	link->num_codecs = rt1015p_get_num_codecs();
+	link->init = rt1015p_init;
+	link->ops = &rt1015p_ops;
+}
+
+void sof_rt1015p_codec_conf(struct snd_soc_card *card)
+{
+	if (rt1015p_get_num_codecs() == 1)
+		return;
+
+	card->codec_conf = rt1015p_codec_confs;
+	card->num_configs = ARRAY_SIZE(rt1015p_codec_confs);
+}
diff --git a/sound/soc/intel/boards/sof_realtek_common.h b/sound/soc/intel/boards/sof_realtek_common.h
index 87cb3812b926..cb0b49b2855c 100644
--- a/sound/soc/intel/boards/sof_realtek_common.h
+++ b/sound/soc/intel/boards/sof_realtek_common.h
@@ -21,4 +21,11 @@
 void sof_rt1011_dai_link(struct snd_soc_dai_link *link);
 void sof_rt1011_codec_conf(struct snd_soc_card *card);
 
+#define RT1015P_CODEC_DAI	"HiFi"
+#define RT1015P_DEV0_NAME	"RTL1015:00"
+#define RT1015P_DEV1_NAME	"RTL1015:01"
+
+void sof_rt1015p_dai_link(struct snd_soc_dai_link *link);
+void sof_rt1015p_codec_conf(struct snd_soc_card *card);
+
 #endif /* __SOF_REALTEK_COMMON_H */
diff --git a/sound/soc/intel/boards/sof_rt5682.c b/sound/soc/intel/boards/sof_rt5682.c
index 55505e207bc0..f4b898c1719f 100644
--- a/sound/soc/intel/boards/sof_rt5682.c
+++ b/sound/soc/intel/boards/sof_rt5682.c
@@ -45,8 +45,9 @@
 #define SOF_RT1011_SPEAKER_AMP_PRESENT		BIT(13)
 #define SOF_RT1015_SPEAKER_AMP_PRESENT		BIT(14)
 #define SOF_RT1015_SPEAKER_AMP_100FS		BIT(15)
-#define SOF_MAX98373_SPEAKER_AMP_PRESENT	BIT(16)
-#define SOF_MAX98360A_SPEAKER_AMP_PRESENT	BIT(17)
+#define SOF_RT1015P_SPEAKER_AMP_PRESENT		BIT(16)
+#define SOF_MAX98373_SPEAKER_AMP_PRESENT	BIT(17)
+#define SOF_MAX98360A_SPEAKER_AMP_PRESENT	BIT(18)
 
 /* Default: MCLK on, MCLK 19.2M, SSP0  */
 static unsigned long sof_rt5682_quirk = SOF_RT5682_MCLK_EN |
@@ -723,6 +724,8 @@ static struct snd_soc_dai_link *sof_card_dai_links_create(struct device *dev,
 			links[id].num_codecs = ARRAY_SIZE(rt1015_components);
 			links[id].init = speaker_codec_init_lr;
 			links[id].ops = &sof_rt1015_ops;
+		} else if (sof_rt5682_quirk & SOF_RT1015P_SPEAKER_AMP_PRESENT) {
+			sof_rt1015p_dai_link(&links[id]);
 		} else if (sof_rt5682_quirk &
 				SOF_MAX98373_SPEAKER_AMP_PRESENT) {
 			links[id].codecs = max_98373_components;
@@ -851,6 +854,8 @@ static int sof_audio_probe(struct platform_device *pdev)
 		sof_max98373_codec_conf(&sof_audio_card_rt5682);
 	else if (sof_rt5682_quirk & SOF_RT1011_SPEAKER_AMP_PRESENT)
 		sof_rt1011_codec_conf(&sof_audio_card_rt5682);
+	else if (sof_rt5682_quirk & SOF_RT1015P_SPEAKER_AMP_PRESENT)
+		sof_rt1015p_codec_conf(&sof_audio_card_rt5682);
 
 	dai_links = sof_card_dai_links_create(&pdev->dev, ssp_codec, ssp_amp,
 					      dmic_be_num, hdmi_num);
@@ -940,6 +945,15 @@ static const struct platform_device_id board_ids[] = {
 					SOF_RT5682_SSP_AMP(1) |
 					SOF_RT5682_NUM_HDMIDEV(4)),
 	},
+	{
+		.name = "jsl_rt5682_rt1015p",
+		.driver_data = (kernel_ulong_t)(SOF_RT5682_MCLK_EN |
+					SOF_RT5682_MCLK_24MHZ |
+					SOF_RT5682_SSP_CODEC(0) |
+					SOF_SPEAKER_AMP_PRESENT |
+					SOF_RT1015P_SPEAKER_AMP_PRESENT |
+					SOF_RT5682_SSP_AMP(1)),
+	},
 	{ }
 };
 
@@ -966,3 +980,4 @@ MODULE_ALIAS("platform:tgl_max98373_rt5682");
 MODULE_ALIAS("platform:jsl_rt5682_max98360a");
 MODULE_ALIAS("platform:cml_rt1015_rt5682");
 MODULE_ALIAS("platform:tgl_rt1011_rt5682");
+MODULE_ALIAS("platform:jsl_rt5682_rt1015p");
diff --git a/sound/soc/intel/common/soc-acpi-intel-jsl-match.c b/sound/soc/intel/common/soc-acpi-intel-jsl-match.c
index 52238db0bcb5..73fe4f89a82d 100644
--- a/sound/soc/intel/common/soc-acpi-intel-jsl-match.c
+++ b/sound/soc/intel/common/soc-acpi-intel-jsl-match.c
@@ -19,6 +19,11 @@ static struct snd_soc_acpi_codecs rt1015_spk = {
 	.codecs = {"10EC1015"}
 };
 
+static struct snd_soc_acpi_codecs rt1015p_spk = {
+	.num_codecs = 1,
+	.codecs = {"RTL1015"}
+};
+
 static struct snd_soc_acpi_codecs mx98360a_spk = {
 	.num_codecs = 1,
 	.codecs = {"MX98360A"}
@@ -52,6 +57,14 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_jsl_machines[] = {
 		.quirk_data = &rt1015_spk,
 		.sof_tplg_filename = "sof-jsl-rt5682-rt1015.tplg",
 	},
+	{
+		.id = "10EC5682",
+		.drv_name = "jsl_rt5682_rt1015p",
+		.sof_fw_filename = "sof-jsl.ri",
+		.machine_quirk = snd_soc_acpi_codec_list,
+		.quirk_data = &rt1015p_spk,
+		.sof_tplg_filename = "sof-jsl-rt5682-rt1015.tplg",
+	},
 	{
 		.id = "10EC5682",
 		.drv_name = "jsl_rt5682_max98360a",
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 8+ messages in thread
end of thread, other threads:[~2021-03-18 18:36 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-17 11:08 [PATCH v3] ASoC: Intel: sof_rt5682: Add ALC1015Q-VB speaker amp support Brent Lu
2021-03-17 14:02 ` Pierre-Louis Bossart
2021-03-17 15:37   ` Lu, Brent
2021-03-18  1:21     ` Jack Yu
2021-03-18  2:19       ` kent_chen@realtek.com [陳建宏]
2021-03-18  1:21   ` Jack Yu
2021-03-18 10:57     ` Pierre-Louis Bossart
2021-03-18 18:36 ` Mark Brown

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).