From: Peter Chubb <peter@chubb.wattle.id.au>
To: trivial@rustcorp.com
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH] Fix loose->lose typos in 2.6.0-test2
Date: Mon, 28 Jul 2003 19:09:02 +1000 [thread overview]
Message-ID: <16164.59438.761414.665378@wombat.chubb.wattle.id.au> (raw)
I cringe every time I see `loose' used where `lose' is intended.
Here's a fix for the few that escaped the attentions of the spelling mafia...
# This is a BitKeeper generated patch for the following project:
# Project Name: Linux kernel tree
# This patch format is intended for GNU patch command version 2.5 or higher.
# This patch includes the following deltas:
# ChangeSet 1.1595 -> 1.1596
# include/linux/securebits.h 1.2 -> 1.3
# drivers/scsi/arm/fas216.c 1.23 -> 1.24
# drivers/char/sx.c 1.37 -> 1.38
# drivers/char/serial167.c 1.29 -> 1.30
# arch/alpha/kernel/time.c 1.20 -> 1.21
# drivers/scsi/sym53c8xx_comm.h 1.12 -> 1.13
# arch/mips/ddb5xxx/ddb5476/setup.c 1.3 -> 1.4
# drivers/scsi/sym53c8xx.c 1.39 -> 1.40
# drivers/net/irda/irport.c 1.20 -> 1.21
# arch/i386/kernel/timers/timer_tsc.c 1.22 -> 1.23
# drivers/block/elevator.c 1.49 -> 1.50
# drivers/usb/serial/ftdi_sio.c 1.45 -> 1.46
# net/irda/qos.c 1.12 -> 1.13
# drivers/net/bonding/bond_main.c 1.26 -> 1.27
#
# The following is the BitKeeper ChangeSet Log
# --------------------------------------------
# 03/07/28 peterc@gelato.unsw.edu.au 1.1596
# Spelling fix: Loose->Lose (remember: loose -> free; lose -> can't find, or come last)
# --------------------------------------------
#
diff -Nru a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c
--- a/arch/alpha/kernel/time.c Mon Jul 28 14:18:43 2003
+++ b/arch/alpha/kernel/time.c Mon Jul 28 14:18:43 2003
@@ -375,8 +375,8 @@
wall_to_monotonic.tv_nsec = 0;
if (HZ > (1<<16)) {
- extern void __you_loose (void);
- __you_loose();
+ extern void __you_lose (void);
+ __you_lose();
}
state.last_time = cc1;
diff -Nru a/arch/i386/kernel/timers/timer_tsc.c b/arch/i386/kernel/timers/timer_tsc.c
--- a/arch/i386/kernel/timers/timer_tsc.c Mon Jul 28 14:18:43 2003
+++ b/arch/i386/kernel/timers/timer_tsc.c Mon Jul 28 14:18:43 2003
@@ -182,9 +182,9 @@
if (lost >= 2) {
jiffies += lost-1;
- /* sanity check to ensure we're not always loosing ticks */
+ /* sanity check to ensure we're not always losing ticks */
if (lost_count++ > 100) {
- printk(KERN_WARNING "Loosing too many ticks!\n");
+ printk(KERN_WARNING "Losing too many ticks!\n");
printk(KERN_WARNING "TSC cannot be used as a timesource."
" (Are you running with SpeedStep?)\n");
printk(KERN_WARNING "Falling back to a sane timesource.\n");
diff -Nru a/arch/mips/ddb5xxx/ddb5476/setup.c b/arch/mips/ddb5xxx/ddb5476/setup.c
--- a/arch/mips/ddb5xxx/ddb5476/setup.c Mon Jul 28 14:18:43 2003
+++ b/arch/mips/ddb5xxx/ddb5476/setup.c Mon Jul 28 14:18:43 2003
@@ -232,7 +232,7 @@
ddb_set_pmr(DDB_PCIINIT1, DDB_PCICMD_MEM, DDB_PCI_MEM_BASE, DDB_PCI_ACCESS_32);
/* ----------- setup PDARs ------------ */
- /* this is problematic - it will reset Aladin which cause we loose
+ /* this is problematic - it will reset Aladin which cause we lose
* serial port, and we don't know how to set up Aladin chip again.
*/
// ddb_pci_reset_bus();
diff -Nru a/drivers/block/elevator.c b/drivers/block/elevator.c
--- a/drivers/block/elevator.c Mon Jul 28 14:18:43 2003
+++ b/drivers/block/elevator.c Mon Jul 28 14:18:43 2003
@@ -20,7 +20,7 @@
*
* Jens:
* - Rework again to work with bio instead of buffer_heads
- * - loose bi_dev comparisons, partition handling is right now
+ * - lose bi_dev comparisons, partition handling is right now
* - completely modularize elevator setup and teardown
*
*/
diff -Nru a/drivers/char/serial167.c b/drivers/char/serial167.c
--- a/drivers/char/serial167.c Mon Jul 28 14:18:43 2003
+++ b/drivers/char/serial167.c Mon Jul 28 14:18:43 2003
@@ -451,7 +451,7 @@
*tty->flip.char_buf_ptr++ = 0;
/*
If the flip buffer itself is
- overflowing, we still loose
+ overflowing, we still lose
the next incoming character.
*/
if(tty->flip.count < TTY_FLIPBUF_SIZE){
diff -Nru a/drivers/char/sx.c b/drivers/char/sx.c
--- a/drivers/char/sx.c Mon Jul 28 14:18:43 2003
+++ b/drivers/char/sx.c Mon Jul 28 14:18:43 2003
@@ -166,7 +166,7 @@
* cleanup. Not good.
*
* Revision 0.10 1999/03/28 08:09:43 wolff
- * Fixed loosing characters on close.
+ * Fixed losing characters on close.
*
* Revision 0.9 1999/03/21 22:52:01 wolff
* Ported back to 2.2.... (minor things)
diff -Nru a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
--- a/drivers/net/bonding/bond_main.c Mon Jul 28 14:18:43 2003
+++ b/drivers/net/bonding/bond_main.c Mon Jul 28 14:18:43 2003
@@ -362,7 +362,7 @@
* so specific modes can take actions when the primary adapter is
* changed.
* - Take the updelay parameter into consideration during bond_enslave
- * since some adapters loose their link during setting the device.
+ * since some adapters lose their link during setting the device.
* - Renamed bond_3ad_link_status_changed() to
* bond_3ad_handle_link_change() for compatibility with TLB.
* new version - 2.1.0
diff -Nru a/drivers/net/irda/irport.c b/drivers/net/irda/irport.c
--- a/drivers/net/irda/irport.c Mon Jul 28 14:18:43 2003
+++ b/drivers/net/irda/irport.c Mon Jul 28 14:18:43 2003
@@ -724,7 +724,7 @@
*
* Called only from irport_interrupt()
* Make sure this function is *not* called while we are receiving,
- * otherwise we will reset fifo and loose data :-(
+ * otherwise we will reset fifo and lose data :-(
*/
static inline void irport_write_wakeup(struct irport_cb *self)
{
diff -Nru a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
--- a/drivers/scsi/arm/fas216.c Mon Jul 28 14:18:43 2003
+++ b/drivers/scsi/arm/fas216.c Mon Jul 28 14:18:43 2003
@@ -2132,7 +2132,7 @@
* executed, unless a target connects to us.
*/
if (info->reqSCpnt)
- printk(KERN_WARNING "scsi%d.%c: loosing request command\n",
+ printk(KERN_WARNING "scsi%d.%c: losing request command\n",
info->host->host_no, '0' + SCpnt->device->id);
info->reqSCpnt = SCpnt;
}
diff -Nru a/drivers/scsi/sym53c8xx.c b/drivers/scsi/sym53c8xx.c
--- a/drivers/scsi/sym53c8xx.c Mon Jul 28 14:18:43 2003
+++ b/drivers/scsi/sym53c8xx.c Mon Jul 28 14:18:43 2003
@@ -619,7 +619,7 @@
** use several SCSI adapters, we are using one lock per controller
** instead of some global one. For the moment (linux-2.1.95), driver's
** entry points are called with the 'io_request_lock' lock held, so:
-** - We are uselessly loosing a couple of micro-seconds to lock the
+** - We are uselessly losing a couple of micro-seconds to lock the
** controller data structure.
** - But the driver is not broken by design for SMP and so can be
** more resistant to bugs or bad changes in the IO sub-system code.
diff -Nru a/drivers/scsi/sym53c8xx_comm.h b/drivers/scsi/sym53c8xx_comm.h
--- a/drivers/scsi/sym53c8xx_comm.h Mon Jul 28 14:18:43 2003
+++ b/drivers/scsi/sym53c8xx_comm.h Mon Jul 28 14:18:43 2003
@@ -417,7 +417,7 @@
** one. For the moment (linux-2.1.95), driver's entry
** points are called with the 'io_request_lock' lock
** held, so:
-** - We are uselessly loosing a couple of micro-seconds
+** - We are uselessly losing a couple of micro-seconds
** to lock the controller data structure.
** - But the driver is not broken by design for SMP and
** so can be more resistant to bugs or bad changes in
diff -Nru a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
--- a/drivers/usb/serial/ftdi_sio.c Mon Jul 28 14:18:43 2003
+++ b/drivers/usb/serial/ftdi_sio.c Mon Jul 28 14:18:43 2003
@@ -1152,7 +1152,7 @@
0, buf, 0, WDR_TIMEOUT);
/* Termios defaults are set by usb_serial_init. We don't change
- port->tty->termios - this would loose speed settings, etc.
+ port->tty->termios - this would lose speed settings, etc.
This is same behaviour as serial.c/rs_open() - Kuba */
/* ftdi_set_termios will send usb control messages */
diff -Nru a/include/linux/securebits.h b/include/linux/securebits.h
--- a/include/linux/securebits.h Mon Jul 28 14:18:43 2003
+++ b/include/linux/securebits.h Mon Jul 28 14:18:43 2003
@@ -14,7 +14,7 @@
#define SECURE_NOROOT 0
/* When set, setuid to/from uid 0 does not trigger capability-"fixes"
- to be compatible with old programs relying on set*uid to loose
+ to be compatible with old programs relying on set*uid to lose
privileges. When unset, setuid doesn't change privileges. */
#define SECURE_NO_SETUID_FIXUP 2
diff -Nru a/net/irda/qos.c b/net/irda/qos.c
--- a/net/irda/qos.c Mon Jul 28 14:18:43 2003
+++ b/net/irda/qos.c Mon Jul 28 14:18:43 2003
@@ -417,7 +417,7 @@
* Fix tx data size according to user limits - Jean II
*/
if (qos->data_size.value > sysctl_max_tx_data_size)
- /* Allow non discrete adjustement to avoid loosing capacity */
+ /* Allow non discrete adjustement to avoid losing capacity */
qos->data_size.value = sysctl_max_tx_data_size;
/*
* Override Tx window if user request it. - Jean II
next reply other threads:[~2003-07-28 8:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-07-28 9:09 Peter Chubb [this message]
2003-08-15 17:12 [PATCH] Fix loose->lose typos in 2.6.0-test2 Rusty Russell
2003-08-15 19:12 ` Randy.Dunlap
2003-08-22 18:29 ` Rusty Russell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=16164.59438.761414.665378@wombat.chubb.wattle.id.au \
--to=peter@chubb.wattle.id.au \
--cc=linux-kernel@vger.kernel.org \
--cc=trivial@rustcorp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).