From: satya priya <skakit@codeaurora.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>,
rnayak@codeaurora.org, linux-arm-msm@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
kgunda@codeaurora.org, satya priya <skakit@codeaurora.org>
Subject: [PATCH V3 2/5] regulator: qcom-rpmh: Add PM7325/PMR735A regulator support
Date: Wed, 31 Mar 2021 17:35:36 +0530 [thread overview]
Message-ID: <1617192339-3760-3-git-send-email-skakit@codeaurora.org> (raw)
In-Reply-To: <1617192339-3760-1-git-send-email-skakit@codeaurora.org>
Add support for PM7325/PMR735A regulators. This ensures
that consumers are able to modify the physical state of PMIC
regulators.
Signed-off-by: satya priya <skakit@codeaurora.org>
---
Changes in V2:
- No change.
Changes in V3:
- No change.
drivers/regulator/qcom-rpmh-regulator.c | 53 ++++++++++++++++++++++++++++++++-
1 file changed, 52 insertions(+), 1 deletion(-)
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 2bd2439..22fec37 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0
-// Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
+// Copyright (c) 2018-2021, The Linux Foundation. All rights reserved.
#define pr_fmt(fmt) "%s: " fmt, __func__
@@ -1042,6 +1042,49 @@ static const struct rpmh_vreg_init_data pmx55_vreg_data[] = {
{},
};
+static const struct rpmh_vreg_init_data pm7325_vreg_data[] = {
+ RPMH_VREG("smps1", "smp%s1", &pmic5_hfsmps510, "vdd-s1"),
+ RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps520, "vdd-s2"),
+ RPMH_VREG("smps3", "smp%s3", &pmic5_ftsmps520, "vdd-s3"),
+ RPMH_VREG("smps4", "smp%s4", &pmic5_ftsmps520, "vdd-s4"),
+ RPMH_VREG("smps5", "smp%s5", &pmic5_ftsmps520, "vdd-s5"),
+ RPMH_VREG("smps6", "smp%s6", &pmic5_ftsmps520, "vdd-s6"),
+ RPMH_VREG("smps7", "smp%s7", &pmic5_ftsmps520, "vdd-s7"),
+ RPMH_VREG("smps8", "smp%s8", &pmic5_hfsmps510, "vdd-s8"),
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1-l4-l12-l15"),
+ RPMH_VREG("ldo2", "ldo%s2", &pmic5_pldo, "vdd-l2-l7"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"),
+ RPMH_VREG("ldo4", "ldo%s4", &pmic5_nldo, "vdd-l1-l4-l12-l15"),
+ RPMH_VREG("ldo5", "ldo%s5", &pmic5_nldo, "vdd-l5"),
+ RPMH_VREG("ldo6", "ldo%s6", &pmic5_nldo, "vdd-l6-l9-l10"),
+ RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, "vdd-l2-l7"),
+ RPMH_VREG("ldo8", "ldo%s8", &pmic5_nldo, "vdd-l8"),
+ RPMH_VREG("ldo9", "ldo%s9", &pmic5_nldo, "vdd-l6-l9-l10"),
+ RPMH_VREG("ldo10", "ldo%s10", &pmic5_nldo, "vdd-l6-l9-l10"),
+ RPMH_VREG("ldo11", "ldo%s11", &pmic5_pldo_lv, "vdd-l11-l17-l18-l19"),
+ RPMH_VREG("ldo12", "ldo%s12", &pmic5_nldo, "vdd-l1-l4-l12-l15"),
+ RPMH_VREG("ldo13", "ldo%s13", &pmic5_nldo, "vdd-l13"),
+ RPMH_VREG("ldo14", "ldo%s14", &pmic5_nldo, "vdd-l14-l16"),
+ RPMH_VREG("ldo15", "ldo%s15", &pmic5_nldo, "vdd-l1-l4-l12-l15"),
+ RPMH_VREG("ldo16", "ldo%s16", &pmic5_nldo, "vdd-l14-l16"),
+ RPMH_VREG("ldo17", "ldo%s17", &pmic5_pldo_lv, "vdd-l11-l17-l18-l19"),
+ RPMH_VREG("ldo18", "ldo%s18", &pmic5_pldo_lv, "vdd-l11-l17-l18-l19"),
+ RPMH_VREG("ldo19", "ldo%s19", &pmic5_pldo_lv, "vdd-l11-l17-l18-l19"),
+};
+
+static const struct rpmh_vreg_init_data pmr735a_vreg_data[] = {
+ RPMH_VREG("smps1", "smp%s1", &pmic5_ftsmps520, "vdd-s1"),
+ RPMH_VREG("smps2", "smp%s2", &pmic5_ftsmps520, "vdd-s2"),
+ RPMH_VREG("smps3", "smp%s3", &pmic5_hfsmps510, "vdd-s3"),
+ RPMH_VREG("ldo1", "ldo%s1", &pmic5_nldo, "vdd-l1-l2"),
+ RPMH_VREG("ldo2", "ldo%s2", &pmic5_nldo, "vdd-l1-l2"),
+ RPMH_VREG("ldo3", "ldo%s3", &pmic5_nldo, "vdd-l3"),
+ RPMH_VREG("ldo4", "ldo%s4", &pmic5_pldo_lv, "vdd-l4"),
+ RPMH_VREG("ldo5", "ldo%s5", &pmic5_nldo, "vdd-l5-l6"),
+ RPMH_VREG("ldo6", "ldo%s6", &pmic5_nldo, "vdd-l5-l6"),
+ RPMH_VREG("ldo7", "ldo%s7", &pmic5_pldo, "vdd-l7-bob"),
+};
+
static int rpmh_regulator_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1136,6 +1179,14 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
.compatible = "qcom,pmx55-rpmh-regulators",
.data = pmx55_vreg_data,
},
+ {
+ .compatible = "qcom,pm7325-rpmh-regulators",
+ .data = pm7325_vreg_data,
+ },
+ {
+ .compatible = "qcom,pmr735a-rpmh-regulators",
+ .data = pmr735a_vreg_data,
+ },
{}
};
MODULE_DEVICE_TABLE(of, rpmh_regulator_match_table);
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2021-03-31 12:07 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-31 12:05 [PATCH V3 0/5] Add PM7325/PM8350C/PMR735A regulator support satya priya
2021-03-31 12:05 ` [PATCH V3 1/5] regulator: qcom-rpmh: Add pmic5_ftsmps520 buck satya priya
2021-03-31 12:05 ` satya priya [this message]
2021-03-31 18:10 ` [PATCH V3 2/5] regulator: qcom-rpmh: Add PM7325/PMR735A regulator support Matthias Kaehlcke
2021-03-31 12:05 ` [PATCH V3 3/5] arm64: dts: qcom: sc7280: Add RPMh regulators for sc7280-idp satya priya
2021-03-31 18:30 ` Matthias Kaehlcke
2021-03-31 12:05 ` [PATCH V3 4/5] dt-bindings: regulator: Convert RPMh regulator bindings to YAML satya priya
2021-03-31 12:18 ` Mark Brown
2021-04-01 16:56 ` Rob Herring
2021-03-31 12:05 ` [PATCH V3 5/5] dt-bindings: regulator: Add compatibles for PM7325/PMR735A satya priya
2021-04-01 20:43 ` [PATCH V3 0/5] Add PM7325/PM8350C/PMR735A regulator support Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1617192339-3760-3-git-send-email-skakit@codeaurora.org \
--to=skakit@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kgunda@codeaurora.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=rnayak@codeaurora.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).