LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Zheyu Ma <zheyuma97@gmail.com>
To: stefanr@s5r6.in-berlin.de
Cc: linux1394-devel@lists.sourceforge.net,
	linux-kernel@vger.kernel.org, security@kernel.org,
	greg@kroah.com, Zheyu Ma <zheyuma97@gmail.com>
Subject: [PATCH] firewire: nosy: Fix a use-after-free bug in nosy_ioctl()
Date: Sat,  3 Apr 2021 06:58:36 +0000
Message-ID: <1617433116-5930-1-git-send-email-zheyuma97@gmail.com> (raw)

For each device, the nosy driver allocates a pcilynx structure.
A use-after-free might happen in the following scenario:

1. Open nosy device for the first time and call ioctl with command
    NOSY_IOC_START, then a new client A will be malloced and added
    to doubly linked list.
2. Open nosy device for the second time and call ioctl with command
    NOSY_IOC_START, then a new client B will be malloced and added
    to doubly linked list.
3. Call ioctl with command NOSY_IOC_START for client A, then client A
    will be readded to the doubly linked list. Now the doubly linked
    list is messed up.
4. Close the first nosy device and nosy_release will be called.
    In nosy_release, client A will be unlinked and freed.
5. Close the second nosy device, and client A will be referenced,
    resulting in UAF.

The root cause of this bug is that the element in the doubly linked list
is reentered into the list.
Fix this bug by adding a check before inserting a client. If a client
is already in the linked list, don't insert it.

The following KASAN report reveals it:

    [   14.672676 ] BUG: KASAN: use-after-free in nosy_release+0x1ea/0x210
    [   14.673113 ] Write of size 8 at addr ffff888102ad7360 by task poc
    [   14.673609 ] CPU: 3 PID: 337 Comm: poc Not tainted 5.12.0-rc5+ #6
    [   14.673988 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009),
    BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
    [   14.674686 ] Call Trace:
    [   14.674843 ]  dump_stack+0x8a/0xb5
    [   14.675061 ]  print_address_description.constprop.0+0x18/0x130
    [   14.675428 ]  ? nosy_release+0x1ea/0x210
    [   14.675676 ]  ? nosy_release+0x1ea/0x210
    [   14.675916 ]  kasan_report.cold+0x7f/0x111
    [   14.676169 ]  ? nosy_release+0x1ea/0x210
    [   14.676409 ]  nosy_release+0x1ea/0x210
    [   14.676642 ]  __fput+0x1e2/0x840
    [   14.676844 ]  task_work_run+0xe8/0x180
    [   14.677083 ]  exit_to_user_mode_prepare+0x114/0x120
    [   14.677388 ]  syscall_exit_to_user_mode+0x1d/0x40
    [   14.677678 ]  entry_SYSCALL_64_after_hwframe+0x44/0xae
    [   14.677995 ] RIP: 0033:0x7fc5a8666f30
    [   14.678229 ] Code: 00 64 c7 00 0d 00 00 00 b8 ff ff ff ff eb 90
    b8 ff ff ff ff eb 89 0f 1f 40 00 83 3d d9 27 2c 00 00 75 10 b8 03
    00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e84
    [   14.679385 ] RSP: 002b:00007ffe9e94cd68 EFLAGS: 00000246
    ORIG_RAX: 0000000000000003
    [   14.679862 ] RAX: 0000000000000000 RBX: 0000000000000000
    RCX: 00007fc5a8666f30
    [   14.680301 ] RDX: 00007ffe9e94ce78 RSI: 0000000000002601
    RDI: 0000000000000004
    [   14.680743 ] RBP: 00007ffe9e94cd80 R08: 0000564727400850
    R09: 00007fc5a8939ba0
    [   14.681180 ] R10: 0000000000000692 R11: 0000000000000246
    R12: 0000564727400610
    [   14.681624 ] R13: 00007ffe9e94ce60 R14: 0000000000000000
    R15: 0000000000000000
    [   14.682072 ]
    [   14.682168 ] Allocated by task 337:
    [   14.682387 ]  kasan_save_stack+0x1b/0x40
    [   14.682633 ]  __kasan_kmalloc+0x7a/0x90
    [   14.682868 ]  nosy_open+0x154/0x4d0
    [   14.683089 ]  misc_open+0x2ec/0x410
    [   14.683313 ]  chrdev_open+0x20d/0x5a0
    [   14.683541 ]  do_dentry_open+0x40f/0xe80
    [   14.683787 ]  path_openat+0x1cf9/0x37b0
    [   14.684025 ]  do_filp_open+0x16d/0x390
    [   14.684253 ]  do_sys_openat2+0x11d/0x360
    [   14.684497 ]  __x64_sys_open+0xfd/0x1a0
    [   14.684736 ]  do_syscall_64+0x33/0x40
    [   14.684964 ]  entry_SYSCALL_64_after_hwframe+0x44/0xae
    [   14.685283 ]
    [   14.685384 ] Freed by task 337:
    [   14.685580 ]  kasan_save_stack+0x1b/0x40
    [   14.685822 ]  kasan_set_track+0x1c/0x30
    [   14.686062 ]  kasan_set_free_info+0x20/0x30
    [   14.686324 ]  __kasan_slab_free+0xe5/0x110
    [   14.686581 ]  kfree+0x8f/0x210
    [   14.686775 ]  nosy_release+0x158/0x210
    [   14.687011 ]  __fput+0x1e2/0x840
    [   14.687213 ]  task_work_run+0xe8/0x180
    [   14.687449 ]  exit_to_user_mode_prepare+0x114/0x120
    [   14.687750 ]  syscall_exit_to_user_mode+0x1d/0x40
    [   14.688040 ]  entry_SYSCALL_64_after_hwframe+0x44/0xae
    [   14.688356 ]
    [   14.688454 ] The buggy address belongs to the object at
    ffff888102ad7300
    [   14.688454 ]  which belongs to the cache kmalloc-128 of size 128
    [   14.689232 ] The buggy address is located 96 bytes inside of
    [   14.689232 ]  128-byte region [ffff888102ad7300, ffff888102ad7380)
    [   14.689955 ] The buggy address belongs to the page:
    [   14.690258 ] page:0000000046ca3dc1 refcount:1 mapcount:0
    mapping:0000000000000000 index:0xffff888102ad7100 pfn:0x102ad6
    [   14.690917 ] head:0000000046ca3dc1 order:1 compound_mapcount:0
    [   14.691278 ] flags: 0x200000000010200(slab|head)
    [   14.691562 ] raw: 0200000000010200 dead000000000100
    dead000000000122  ffff8881000428c0
    [   14.692044 ] raw: ffff888102ad7100 0000000080200013
    00000001ffffffff  0000000000000000
    [   14.692531 ] page dumped because: kasan: bad access detected
    [   14.692877 ]
    [   14.692978 ] Memory state around the buggy address:
    [   14.693282 ]  ffff888102ad7200: fa fb fb fb fb fb fb fb fb fb
    fb fb fb fb fb fb
    [   14.693737 ]  ffff888102ad7280: fc fc fc fc fc fc fc fc fc fc
    fc fc fc fc fc fc
    [   14.694191 ] >ffff888102ad7300: fa fb fb fb fb fb fb fb fb fb
    fb fb fb fb fb fb
    [   14.695061 ]  ffff888102ad7380: fc fc fc fc fc fc fc fc fc fc
    fc fc fc fc fc fc
    [   14.695518 ]  ffff888102ad7400: 00 00 00 00 00 00 00 00 00 00
    00 00 00 00 fc fc
    [   14.695964 ]
    ==================================================================]

Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
---
 drivers/firewire/nosy.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/firewire/nosy.c b/drivers/firewire/nosy.c
index 5fd6a60b6741..c746aedbaa70 100644
--- a/drivers/firewire/nosy.c
+++ b/drivers/firewire/nosy.c
@@ -343,7 +343,7 @@ nosy_read(struct file *file, char __user *buffer, size_t count, loff_t *offset)
 static long
 nosy_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
-	struct client *client = file->private_data;
+	struct client *tmp, *client = file->private_data;
 	spinlock_t *client_list_lock = &client->lynx->client_list_lock;
 	struct nosy_stats stats;
 
@@ -360,6 +360,10 @@ nosy_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 			return 0;
 
 	case NOSY_IOC_START:
+		list_for_each_entry(tmp, &client->lynx->client_list, link)
+			if (tmp == client)
+				return -EINVAL;
+
 		spin_lock_irq(client_list_lock);
 		list_add_tail(&client->link, &client->lynx->client_list);
 		spin_unlock_irq(client_list_lock);
-- 
2.17.1


             reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-03  6:58 Zheyu Ma [this message]
2021-04-03  7:06 ` Greg KH
2021-04-03 16:05 ` Linus Torvalds

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1617433116-5930-1-git-send-email-zheyuma97@gmail.com \
    --to=zheyuma97@gmail.com \
    --cc=greg@kroah.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux1394-devel@lists.sourceforge.net \
    --cc=security@kernel.org \
    --cc=stefanr@s5r6.in-berlin.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lore.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git