[PATCH 0/4] crypto: hisilicon - adapt hardware error type

[PATCH 0/4] crypto: hisilicon - adapt hardware error type

[Weili Qian]

This patchset changes 'err_info' to dynamic configuration and enables
new hardware error types for Kunpeng930.

Weili Qian (4):
  crypto: hisilicon - dynamic configuration 'err_info'
  crypto: hisilicon - support new error types for ZIP
  crypto: hisilicon - add new error type for SEC
  crypto: hisilicon - enable new error types for QM

 drivers/crypto/hisilicon/hpre/hpre_main.c | 26 ++++++++++------
 drivers/crypto/hisilicon/qm.c             | 28 ++++++++---------
 drivers/crypto/hisilicon/qm.h             |  8 +++--
 drivers/crypto/hisilicon/sec2/sec_main.c  | 52 +++++++++++++++++++++++--------
 drivers/crypto/hisilicon/zip/zip_main.c   | 34 +++++++++++++-------
 5 files changed, 97 insertions(+), 51 deletions(-)

-- 
2.8.1

[PATCH 1/4] crypto: hisilicon - dynamic configuration 'err_info'

[Weili Qian]

'err_info' does not support dynamic configuration since it is const type.
Therefore, in order to support new error type later, 'err_info' is changed
to dynamic configuration.

Signed-off-by: Weili Qian <qianweili@huawei.com>
---
 drivers/crypto/hisilicon/hpre/hpre_main.c | 26 ++++++++++++++++----------
 drivers/crypto/hisilicon/qm.c             | 22 ++++++++++------------
 drivers/crypto/hisilicon/qm.h             |  3 ++-
 drivers/crypto/hisilicon/sec2/sec_main.c  | 26 ++++++++++++++++----------
 drivers/crypto/hisilicon/zip/zip_main.c   | 25 +++++++++++++++----------
 5 files changed, 59 insertions(+), 43 deletions(-)

diff --git a/drivers/crypto/hisilicon/hpre/hpre_main.c b/drivers/crypto/hisilicon/hpre/hpre_main.c
index a8c7921..7fe7434 100644
--- a/drivers/crypto/hisilicon/hpre/hpre_main.c
+++ b/drivers/crypto/hisilicon/hpre/hpre_main.c
@@ -807,6 +807,20 @@ static void hpre_open_axi_master_ooo(struct hisi_qm *qm)
 	       HPRE_ADDR(qm, HPRE_AM_OOO_SHUTDOWN_ENB));
 }
 
+static void hpre_err_info_init(struct hisi_qm *qm)
+{
+	struct hisi_qm_err_info *err_info = &qm->err_info;
+
+	err_info->ce = QM_BASE_CE;
+	err_info->fe = 0;
+	err_info->ecc_2bits_mask = HPRE_CORE_ECC_2BIT_ERR |
+				   HPRE_OOO_ECC_2BIT_ERR;
+	err_info->dev_ce_mask = HPRE_HAC_RAS_CE_ENABLE;
+	err_info->msi_wr_port = HPRE_WR_MSI_PORT;
+	err_info->acpi_rst = "HRST";
+	err_info->nfe = QM_BASE_NFE | QM_ACC_DO_TASK_TIMEOUT;
+}
+
 static const struct hisi_qm_err_ini hpre_err_ini = {
 	.hw_init		= hpre_set_user_domain_and_cache,
 	.hw_err_enable		= hpre_hw_error_enable,
@@ -815,16 +829,7 @@ static const struct hisi_qm_err_ini hpre_err_ini = {
 	.clear_dev_hw_err_status = hpre_clear_hw_err_status,
 	.log_dev_hw_err		= hpre_log_hw_error,
 	.open_axi_master_ooo	= hpre_open_axi_master_ooo,
-	.err_info		= {
-		.ce			= QM_BASE_CE,
-		.nfe			= QM_BASE_NFE | QM_ACC_DO_TASK_TIMEOUT,
-		.fe			= 0,
-		.ecc_2bits_mask		= HPRE_CORE_ECC_2BIT_ERR |
-					  HPRE_OOO_ECC_2BIT_ERR,
-		.dev_ce_mask		= HPRE_HAC_RAS_CE_ENABLE,
-		.msi_wr_port		= HPRE_WR_MSI_PORT,
-		.acpi_rst		= "HRST",
-	}
+	.err_info_init		= hpre_err_info_init,
 };
 
 static int hpre_pf_probe_init(struct hpre *hpre)
@@ -837,6 +842,7 @@ static int hpre_pf_probe_init(struct hpre *hpre)
 		return ret;
 
 	qm->err_ini = &hpre_err_ini;
+	qm->err_ini->err_info_init(qm);
 	hisi_qm_dev_err_init(qm);
 
 	return 0;
diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c
index 35e6b58..deab797 100644
--- a/drivers/crypto/hisilicon/qm.c
+++ b/drivers/crypto/hisilicon/qm.c
@@ -1700,7 +1700,7 @@ static enum acc_err_result qm_hw_error_handle_v2(struct hisi_qm *qm)
 		if (val == (QM_DB_RANDOM_INVALID | QM_BASE_CE)) {
 			writel(error_status, qm->io_base +
 			       QM_ABNORMAL_INT_SOURCE);
-			writel(qm->err_ini->err_info.nfe,
+			writel(qm->err_info.nfe,
 			       qm->io_base + QM_RAS_NFE_ENABLE);
 			return ACC_ERR_RECOVERED;
 		}
@@ -3080,7 +3080,7 @@ EXPORT_SYMBOL_GPL(hisi_qm_debug_regs_clear);
 
 static void qm_hw_error_init(struct hisi_qm *qm)
 {
-	const struct hisi_qm_err_info *err_info = &qm->err_ini->err_info;
+	struct hisi_qm_err_info *err_info = &qm->err_info;
 
 	if (!qm->ops->hw_error_init) {
 		dev_err(&qm->pdev->dev, "QM doesn't support hw error handling!\n");
@@ -3432,15 +3432,15 @@ static enum acc_err_result qm_dev_err_handle(struct hisi_qm *qm)
 	/* get device hardware error status */
 	err_sts = qm->err_ini->get_dev_hw_err_status(qm);
 	if (err_sts) {
-		if (err_sts & qm->err_ini->err_info.ecc_2bits_mask)
+		if (err_sts & qm->err_info.ecc_2bits_mask)
 			qm->err_status.is_dev_ecc_mbit = true;
 
 		if (qm->err_ini->log_dev_hw_err)
 			qm->err_ini->log_dev_hw_err(qm, err_sts);
 
 		/* ce error does not need to be reset */
-		if ((err_sts | qm->err_ini->err_info.dev_ce_mask) ==
-		     qm->err_ini->err_info.dev_ce_mask) {
+		if ((err_sts | qm->err_info.dev_ce_mask) ==
+		     qm->err_info.dev_ce_mask) {
 			if (qm->err_ini->clear_dev_hw_err_status)
 				qm->err_ini->clear_dev_hw_err_status(qm,
 								err_sts);
@@ -3753,7 +3753,7 @@ static int qm_soft_reset(struct hisi_qm *qm)
 		acpi_status s;
 
 		s = acpi_evaluate_integer(ACPI_HANDLE(&pdev->dev),
-					  qm->err_ini->err_info.acpi_rst,
+					  qm->err_info.acpi_rst,
 					  NULL, &value);
 		if (ACPI_FAILURE(s)) {
 			pci_err(pdev, "NO controller reset method!\n");
@@ -3821,12 +3821,11 @@ static void qm_restart_prepare(struct hisi_qm *qm)
 
 	/* temporarily close the OOO port used for PEH to write out MSI */
 	value = readl(qm->io_base + ACC_AM_CFG_PORT_WR_EN);
-	writel(value & ~qm->err_ini->err_info.msi_wr_port,
+	writel(value & ~qm->err_info.msi_wr_port,
 	       qm->io_base + ACC_AM_CFG_PORT_WR_EN);
 
 	/* clear dev ecc 2bit error source if having */
-	value = qm_get_dev_err_status(qm) &
-		qm->err_ini->err_info.ecc_2bits_mask;
+	value = qm_get_dev_err_status(qm) & qm->err_info.ecc_2bits_mask;
 	if (value && qm->err_ini->clear_dev_hw_err_status)
 		qm->err_ini->clear_dev_hw_err_status(qm, value);
 
@@ -3850,7 +3849,7 @@ static void qm_restart_done(struct hisi_qm *qm)
 
 	/* open the OOO port for PEH to write out MSI */
 	value = readl(qm->io_base + ACC_AM_CFG_PORT_WR_EN);
-	value |= qm->err_ini->err_info.msi_wr_port;
+	value |= qm->err_info.msi_wr_port;
 	writel(value, qm->io_base + ACC_AM_CFG_PORT_WR_EN);
 
 	qm->err_status.is_qm_ecc_mbit = false;
@@ -3989,8 +3988,7 @@ static int qm_check_dev_error(struct hisi_qm *qm)
 	if (ret)
 		return ret;
 
-	return (qm_get_dev_err_status(qm) &
-		qm->err_ini->err_info.ecc_2bits_mask);
+	return (qm_get_dev_err_status(qm) & qm->err_info.ecc_2bits_mask);
 }
 
 void hisi_qm_reset_prepare(struct pci_dev *pdev)
diff --git a/drivers/crypto/hisilicon/qm.h b/drivers/crypto/hisilicon/qm.h
index 34e69fe..8c67712 100644
--- a/drivers/crypto/hisilicon/qm.h
+++ b/drivers/crypto/hisilicon/qm.h
@@ -186,7 +186,7 @@ struct hisi_qm_err_ini {
 	void (*open_axi_master_ooo)(struct hisi_qm *qm);
 	void (*close_axi_master_ooo)(struct hisi_qm *qm);
 	void (*log_dev_hw_err)(struct hisi_qm *qm, u32 err_sts);
-	struct hisi_qm_err_info err_info;
+	void (*err_info_init)(struct hisi_qm *qm);
 };
 
 struct hisi_qm_list {
@@ -226,6 +226,7 @@ struct hisi_qm {
 
 	struct hisi_qm_status status;
 	const struct hisi_qm_err_ini *err_ini;
+	struct hisi_qm_err_info err_info;
 	struct hisi_qm_err_status err_status;
 	unsigned long misc_ctl; /* driver removing and reset sched */
 
diff --git a/drivers/crypto/hisilicon/sec2/sec_main.c b/drivers/crypto/hisilicon/sec2/sec_main.c
index 1affa1b..26b9904 100644
--- a/drivers/crypto/hisilicon/sec2/sec_main.c
+++ b/drivers/crypto/hisilicon/sec2/sec_main.c
@@ -701,6 +701,20 @@ static void sec_open_axi_master_ooo(struct hisi_qm *qm)
 	writel(val | SEC_AXI_SHUTDOWN_ENABLE, qm->io_base + SEC_CONTROL_REG);
 }
 
+static void sec_err_info_init(struct hisi_qm *qm)
+{
+	struct hisi_qm_err_info *err_info = &qm->err_info;
+
+	err_info->ce = QM_BASE_CE;
+	err_info->fe = 0;
+	err_info->ecc_2bits_mask = SEC_CORE_INT_STATUS_M_ECC;
+	err_info->dev_ce_mask = SEC_RAS_CE_ENB_MSK;
+	err_info->msi_wr_port = BIT(0);
+	err_info->acpi_rst = "SRST";
+	err_info->nfe = QM_BASE_NFE | QM_ACC_DO_TASK_TIMEOUT |
+			QM_ACC_WB_NOT_READY_TIMEOUT;
+}
+
 static const struct hisi_qm_err_ini sec_err_ini = {
 	.hw_init		= sec_set_user_domain_and_cache,
 	.hw_err_enable		= sec_hw_error_enable,
@@ -709,16 +723,7 @@ static const struct hisi_qm_err_ini sec_err_ini = {
 	.clear_dev_hw_err_status = sec_clear_hw_err_status,
 	.log_dev_hw_err		= sec_log_hw_error,
 	.open_axi_master_ooo	= sec_open_axi_master_ooo,
-	.err_info		= {
-		.ce		= QM_BASE_CE,
-		.nfe		= QM_BASE_NFE | QM_ACC_DO_TASK_TIMEOUT |
-				  QM_ACC_WB_NOT_READY_TIMEOUT,
-		.fe		= 0,
-		.ecc_2bits_mask	= SEC_CORE_INT_STATUS_M_ECC,
-		.dev_ce_mask	= SEC_RAS_CE_ENB_MSK,
-		.msi_wr_port	= BIT(0),
-		.acpi_rst	= "SRST",
-	}
+	.err_info_init		= sec_err_info_init,
 };
 
 static int sec_pf_probe_init(struct sec_dev *sec)
@@ -727,6 +732,7 @@ static int sec_pf_probe_init(struct sec_dev *sec)
 	int ret;
 
 	qm->err_ini = &sec_err_ini;
+	qm->err_ini->err_info_init(qm);
 
 	ret = sec_set_user_domain_and_cache(qm);
 	if (ret)
diff --git a/drivers/crypto/hisilicon/zip/zip_main.c b/drivers/crypto/hisilicon/zip/zip_main.c
index 4d2e9c8..50407bb 100644
--- a/drivers/crypto/hisilicon/zip/zip_main.c
+++ b/drivers/crypto/hisilicon/zip/zip_main.c
@@ -657,6 +657,19 @@ static void hisi_zip_close_axi_master_ooo(struct hisi_qm *qm)
 	       qm->io_base + HZIP_CORE_INT_SET);
 }
 
+static void hisi_zip_err_info_init(struct hisi_qm *qm)
+{
+	struct hisi_qm_err_info *err_info = &qm->err_info;
+
+	err_info->ce = QM_BASE_CE;
+	err_info->fe = 0;
+	err_info->ecc_2bits_mask = HZIP_CORE_INT_STATUS_M_ECC;
+	err_info->dev_ce_mask = HZIP_CORE_INT_RAS_CE_ENABLE;
+	err_info->msi_wr_port = HZIP_WR_PORT;
+	err_info->acpi_rst = "ZRST";
+	err_info->nfe = QM_BASE_NFE | QM_ACC_WB_NOT_READY_TIMEOUT;
+}
+
 static const struct hisi_qm_err_ini hisi_zip_err_ini = {
 	.hw_init		= hisi_zip_set_user_domain_and_cache,
 	.hw_err_enable		= hisi_zip_hw_error_enable,
@@ -666,16 +679,7 @@ static const struct hisi_qm_err_ini hisi_zip_err_ini = {
 	.log_dev_hw_err		= hisi_zip_log_hw_error,
 	.open_axi_master_ooo	= hisi_zip_open_axi_master_ooo,
 	.close_axi_master_ooo	= hisi_zip_close_axi_master_ooo,
-	.err_info		= {
-		.ce			= QM_BASE_CE,
-		.nfe			= QM_BASE_NFE |
-					  QM_ACC_WB_NOT_READY_TIMEOUT,
-		.fe			= 0,
-		.ecc_2bits_mask		= HZIP_CORE_INT_STATUS_M_ECC,
-		.dev_ce_mask		= HZIP_CORE_INT_RAS_CE_ENABLE,
-		.msi_wr_port		= HZIP_WR_PORT,
-		.acpi_rst		= "ZRST",
-	}
+	.err_info_init		= hisi_zip_err_info_init,
 };
 
 static int hisi_zip_pf_probe_init(struct hisi_zip *hisi_zip)
@@ -690,6 +694,7 @@ static int hisi_zip_pf_probe_init(struct hisi_zip *hisi_zip)
 	hisi_zip->ctrl = ctrl;
 	ctrl->hisi_zip = hisi_zip;
 	qm->err_ini = &hisi_zip_err_ini;
+	qm->err_ini->err_info_init(qm);
 
 	hisi_zip_set_user_domain_and_cache(qm);
 	hisi_qm_dev_err_init(qm);
-- 
2.8.1

[PATCH 2/4] crypto: hisilicon - support new error types for ZIP

[Weili Qian]

Kunpeng930 ZIP adds 'zip_axi_poison_err' 'zip_sva_err' and
'QM_ACC_DO_TASK_TIMEOUT' hardware error types. This patch enables the error
types and configures the error types as NFE.

Signed-off-by: Weili Qian <qianweili@huawei.com>
---
 drivers/crypto/hisilicon/zip/zip_main.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/crypto/hisilicon/zip/zip_main.c b/drivers/crypto/hisilicon/zip/zip_main.c
index 50407bb..2178b40 100644
--- a/drivers/crypto/hisilicon/zip/zip_main.c
+++ b/drivers/crypto/hisilicon/zip/zip_main.c
@@ -68,10 +68,10 @@
 #define HZIP_CORE_INT_RAS_CE_ENABLE	0x1
 #define HZIP_CORE_INT_RAS_NFE_ENB	0x301164
 #define HZIP_CORE_INT_RAS_FE_ENB        0x301168
-#define HZIP_CORE_INT_RAS_NFE_ENABLE	0x7FE
+#define HZIP_CORE_INT_RAS_NFE_ENABLE	0x1FFE
 #define HZIP_SRAM_ECC_ERR_NUM_SHIFT	16
 #define HZIP_SRAM_ECC_ERR_ADDR_SHIFT	24
-#define HZIP_CORE_INT_MASK_ALL		GENMASK(10, 0)
+#define HZIP_CORE_INT_MASK_ALL		GENMASK(12, 0)
 #define HZIP_COMP_CORE_NUM		2
 #define HZIP_DECOMP_CORE_NUM		6
 #define HZIP_CORE_NUM			(HZIP_COMP_CORE_NUM + \
@@ -133,6 +133,8 @@ static const struct hisi_zip_hw_error zip_hw_error[] = {
 	{ .int_msk = BIT(8), .msg = "zip_com_inf_err" },
 	{ .int_msk = BIT(9), .msg = "zip_enc_inf_err" },
 	{ .int_msk = BIT(10), .msg = "zip_pre_out_err" },
+	{ .int_msk = BIT(11), .msg = "zip_axi_poison_err" },
+	{ .int_msk = BIT(12), .msg = "zip_sva_err" },
 	{ /* sentinel */ }
 };
 
@@ -668,6 +670,9 @@ static void hisi_zip_err_info_init(struct hisi_qm *qm)
 	err_info->msi_wr_port = HZIP_WR_PORT;
 	err_info->acpi_rst = "ZRST";
 	err_info->nfe = QM_BASE_NFE | QM_ACC_WB_NOT_READY_TIMEOUT;
+
+	if (qm->ver >= QM_HW_V3)
+		err_info->nfe |= QM_ACC_DO_TASK_TIMEOUT;
 }
 
 static const struct hisi_qm_err_ini hisi_zip_err_ini = {
-- 
2.8.1

[PATCH 3/4] crypto: hisilicon - add new error type for SEC

[Weili Qian]

Kunpeng930 SEC adds several new hardware error types. This patch enables
the new error types and configures the error types as NFE.

Signed-off-by: Weili Qian <qianweili@huawei.com>
---
 drivers/crypto/hisilicon/sec2/sec_main.c | 26 +++++++++++++++++++++++---
 1 file changed, 23 insertions(+), 3 deletions(-)

diff --git a/drivers/crypto/hisilicon/sec2/sec_main.c b/drivers/crypto/hisilicon/sec2/sec_main.c
index 26b9904..6f0062d 100644
--- a/drivers/crypto/hisilicon/sec2/sec_main.c
+++ b/drivers/crypto/hisilicon/sec2/sec_main.c
@@ -42,8 +42,8 @@
 #define SEC_ECC_NUM			16
 #define SEC_ECC_MASH			0xFF
 #define SEC_CORE_INT_DISABLE		0x0
-#define SEC_CORE_INT_ENABLE		0x1ff
-#define SEC_CORE_INT_CLEAR		0x1ff
+#define SEC_CORE_INT_ENABLE		0x7c1ff
+#define SEC_CORE_INT_CLEAR		0x7c1ff
 #define SEC_SAA_ENABLE			0x17f
 
 #define SEC_RAS_CE_REG			0x301050
@@ -51,7 +51,7 @@
 #define SEC_RAS_NFE_REG			0x301058
 #define SEC_RAS_CE_ENB_MSK		0x88
 #define SEC_RAS_FE_ENB_MSK		0x0
-#define SEC_RAS_NFE_ENB_MSK		0x177
+#define SEC_RAS_NFE_ENB_MSK		0x7c177
 #define SEC_RAS_DISABLE		0x0
 #define SEC_MEM_START_INIT_REG	0x301100
 #define SEC_MEM_INIT_DONE_REG		0x301104
@@ -147,6 +147,26 @@ static const struct sec_hw_error sec_hw_errors[] = {
 		.int_msk = BIT(8),
 		.msg = "sec_chain_buff_err_rint"
 	},
+	{
+		.int_msk = BIT(14),
+		.msg = "sec_no_secure_access"
+	},
+	{
+		.int_msk = BIT(15),
+		.msg = "sec_wrapping_key_auth_err"
+	},
+	{
+		.int_msk = BIT(16),
+		.msg = "sec_km_key_crc_fail"
+	},
+	{
+		.int_msk = BIT(17),
+		.msg = "sec_axi_poison_err"
+	},
+	{
+		.int_msk = BIT(18),
+		.msg = "sec_sva_err"
+	},
 	{}
 };
 
-- 
2.8.1

[PATCH 4/4] crypto: hisilicon - enable new error types for QM

[Weili Qian]

QM adds 'qm_mailbox_timeout' and 'qm_flr_timeout' hardware error types on
Kunpeng930. This patch enables the new error types and configures the error
types as NFE.

Signed-off-by: Weili Qian <qianweili@huawei.com>
---
 drivers/crypto/hisilicon/qm.c | 6 ++++--
 drivers/crypto/hisilicon/qm.h | 5 ++++-
 2 files changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c
index deab797..20dbd13 100644
--- a/drivers/crypto/hisilicon/qm.c
+++ b/drivers/crypto/hisilicon/qm.c
@@ -135,9 +135,9 @@
 #define QM_DFX_CNT_CLR_CE		0x100118
 
 #define QM_ABNORMAL_INT_SOURCE		0x100000
-#define QM_ABNORMAL_INT_SOURCE_CLR	GENMASK(12, 0)
+#define QM_ABNORMAL_INT_SOURCE_CLR	GENMASK(14, 0)
 #define QM_ABNORMAL_INT_MASK		0x100004
-#define QM_ABNORMAL_INT_MASK_VALUE	0x1fff
+#define QM_ABNORMAL_INT_MASK_VALUE	0x7fff
 #define QM_ABNORMAL_INT_STATUS		0x100008
 #define QM_ABNORMAL_INT_SET		0x10000c
 #define QM_ABNORMAL_INF00		0x100010
@@ -389,6 +389,8 @@ static const struct hisi_qm_hw_error qm_hw_error[] = {
 	{ .int_msk = BIT(10), .msg = "qm_db_timeout" },
 	{ .int_msk = BIT(11), .msg = "qm_of_fifo_of" },
 	{ .int_msk = BIT(12), .msg = "qm_db_random_invalid" },
+	{ .int_msk = BIT(13), .msg = "qm_mailbox_timeout" },
+	{ .int_msk = BIT(14), .msg = "qm_flr_timeout" },
 	{ /* sentinel */ }
 };
 
diff --git a/drivers/crypto/hisilicon/qm.h b/drivers/crypto/hisilicon/qm.h
index 8c67712..acefdf8 100644
--- a/drivers/crypto/hisilicon/qm.h
+++ b/drivers/crypto/hisilicon/qm.h
@@ -64,10 +64,13 @@
 #define QM_DB_TIMEOUT			BIT(10)
 #define QM_OF_FIFO_OF			BIT(11)
 #define QM_DB_RANDOM_INVALID		BIT(12)
+#define QM_MAILBOX_TIMEOUT		BIT(13)
+#define QM_FLR_TIMEOUT			BIT(14)
 
 #define QM_BASE_NFE	(QM_AXI_RRESP | QM_AXI_BRESP | QM_ECC_MBIT | \
 			 QM_ACC_GET_TASK_TIMEOUT | QM_DB_TIMEOUT | \
-			 QM_OF_FIFO_OF | QM_DB_RANDOM_INVALID)
+			 QM_OF_FIFO_OF | QM_DB_RANDOM_INVALID | \
+			 QM_MAILBOX_TIMEOUT | QM_FLR_TIMEOUT)
 #define QM_BASE_CE			QM_ECC_1BIT
 
 #define QM_Q_DEPTH			1024
-- 
2.8.1

Re: [PATCH 0/4] crypto: hisilicon - adapt hardware error type

[Herbert Xu]

On Mon, Apr 12, 2021 at 08:31:31PM +0800, Weili Qian wrote:
> This patchset changes 'err_info' to dynamic configuration and enables
> new hardware error types for Kunpeng930.
> 
> Weili Qian (4):
>   crypto: hisilicon - dynamic configuration 'err_info'
>   crypto: hisilicon - support new error types for ZIP
>   crypto: hisilicon - add new error type for SEC
>   crypto: hisilicon - enable new error types for QM
> 
>  drivers/crypto/hisilicon/hpre/hpre_main.c | 26 ++++++++++------
>  drivers/crypto/hisilicon/qm.c             | 28 ++++++++---------
>  drivers/crypto/hisilicon/qm.h             |  8 +++--
>  drivers/crypto/hisilicon/sec2/sec_main.c  | 52 +++++++++++++++++++++++--------
>  drivers/crypto/hisilicon/zip/zip_main.c   | 34 +++++++++++++-------
>  5 files changed, 97 insertions(+), 51 deletions(-)

All applied.  Thanks.
-- 
Email: Herbert Xu <herbert@gondor.apana.org.au>
Home Page: http://gondor.apana.org.au/~herbert/
PGP Key: http://gondor.apana.org.au/~herbert/pubkey.txt