Re: [PATCH v5 2/3] dt-bindings: touchscreen: Add HY46XX bindings

From: Rob Herring <robh@kernel.org>
To: Giulio Benetti <giulio.benetti@benettiengineering.com>
Cc: "Dmitry Torokhov" <dmitry.torokhov@gmail.com>,
	linux-input@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	"Henrik Rydberg" <rydberg@bitmath.org>,
	"Jonathan Neuschäfer" <j.neuschaefer@gmx.net>
Subject: Re: [PATCH v5 2/3] dt-bindings: touchscreen: Add HY46XX bindings
Date: Mon, 12 Apr 2021 08:20:00 -0500	[thread overview]
Message-ID: <1618233600.204061.3757975.nullmailer@robh.at.kernel.org> (raw)
In-Reply-To: <20210411114804.151754-3-giulio.benetti@benettiengineering.com>

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 3209 bytes --]

On Sun, 11 Apr 2021 13:48:03 +0200, Giulio Benetti wrote:
> This adds device tree bindings for the Hycon HY46XX touchscreen series.
> 
> Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
> ---
> V1->V2:
> As suggested by Rob Herring:
> * fixed $id: address
> * added "hycon," in front of every custom property
> * changed all possible property to boolean type
> * removed proximity-sensor-switch property since it's not handled in driver
> V2->V3:
> As suggested by Jonathan Neuschäfer:
> * fixed some typo
> * fixed description indentation
> * improved boolean properties descriptions
> * improved hycon,report-speed description
> V3->V4:
> * fixed binding compatible string in example as suggested by Jonathan Neuschäfer
> V4->V5:
> As suggested by Rob Herring:
> * drop hycon- prefix from compatible
> * use Hertz unit suffix for hycon,report-speed instead of u32
> * set hycon,report-speed minimum to 1Hz, 0Hz make controller to do nothing
> * change hycon,power-noise-enable property name to hycon,noise-filter-enable
> * improve hycon,filter-data property description
> * use generic touchscreen node name in example
> ---
>  .../input/touchscreen/hycon,hy46xx.yaml       | 119 ++++++++++++++++++
>  MAINTAINERS                                   |   6 +
>  2 files changed, 125 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml: properties:hycon,report-speed: 'oneOf' conditional failed, one must be fixed:
	'type' is a required property
	Additional properties are not allowed ('minimum', 'maximum' were unexpected)
	/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml: properties:hycon,report-speed: 'oneOf' conditional failed, one must be fixed:
		'enum' is a required property
		'const' is a required property
	/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml: properties:hycon,report-speed: 'oneOf' conditional failed, one must be fixed:
		'$ref' is a required property
		'allOf' is a required property
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml: ignoring, error in schema: properties: hycon,report-speed
warning: no schema found in file: ./Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.example.dt.yaml:0:0: /example-0/i2c/touchscreen@1c: failed to match any schema with compatible: ['hycon,hy4633']

See https://patchwork.ozlabs.org/patch/1464803

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.