linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
To: marcel@holtmann.org, johan.hedberg@gmail.com, devicetree@vger.kernel.org
Cc: mka@chromium.org, linux-kernel@vger.kernel.org,
	linux-bluetooth@vger.kernel.org, hemantg@codeaurora.org,
	linux-arm-msm@vger.kernel.org, bgodavar@codeaurora.org,
	rjliao@codeaurora.org, hbandi@codeaurora.org,
	abhishekpandit@chromium.org,
	Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
Subject: [PATCH v4 4/5] dt-bindings: net: bluetooth: Convert Qualcomm BT binding to DT schema
Date: Tue, 18 May 2021 22:04:45 +0530	[thread overview]
Message-ID: <1621355686-29550-5-git-send-email-gubbaven@codeaurora.org> (raw)
In-Reply-To: <1621355686-29550-1-git-send-email-gubbaven@codeaurora.org>

Converted Qualcomm Bluetooth binidings to DT schema.

Signed-off-by: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org>
---
 .../devicetree/bindings/net/qualcomm-bluetooth.txt |  69 -------------
 .../bindings/net/qualcomm-bluetooth.yaml           | 112 +++++++++++++++++++++
 2 files changed, 112 insertions(+), 69 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
 create mode 100644 Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml

diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
deleted file mode 100644
index 709ca6d..0000000
--- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
+++ /dev/null
@@ -1,69 +0,0 @@
-Qualcomm Bluetooth Chips
----------------------
-
-This documents the binding structure and common properties for serial
-attached Qualcomm devices.
-
-Serial attached Qualcomm devices shall be a child node of the host UART
-device the slave device is attached to.
-
-Required properties:
- - compatible: should contain one of the following:
-   * "qcom,qca6174-bt"
-   * "qcom,qca9377-bt"
-   * "qcom,wcn3990-bt"
-   * "qcom,wcn3991-bt"
-   * "qcom,wcn3998-bt"
-   * "qcom,qca6390-bt"
-
-Optional properties for compatible string qcom,qca6174-bt:
-
- - enable-gpios: gpio specifier used to enable chip
- - clocks: clock provided to the controller (SUSCLK_32KHZ)
- - firmware-name: specify the name of nvm firmware to load
-
-Optional properties for compatible string qcom,qca9377-bt:
-
- - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml
-
-Required properties for compatible string qcom,wcn399x-bt:
-
- - vddio-supply: VDD_IO supply regulator handle.
- - vddxo-supply: VDD_XO supply regulator handle.
- - vddrf-supply: VDD_RF supply regulator handle.
- - vddch0-supply: VDD_CH0 supply regulator handle.
-
-Optional properties for compatible string qcom,wcn399x-bt:
-
- - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml
- - firmware-name: specify the name of nvm firmware to load
- - clocks: clock provided to the controller
-
-Examples:
-
-serial@7570000 {
-	label = "BT-UART";
-	status = "okay";
-
-	bluetooth {
-		compatible = "qcom,qca6174-bt";
-
-		enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
-		clocks = <&divclk4>;
-		firmware-name = "nvm_00440302.bin";
-	};
-};
-
-serial@898000 {
-	bluetooth {
-		compatible = "qcom,wcn3990-bt";
-
-		vddio-supply = <&vreg_s4a_1p8>;
-		vddxo-supply = <&vreg_l7a_1p8>;
-		vddrf-supply = <&vreg_l17a_1p3>;
-		vddch0-supply = <&vreg_l25a_3p3>;
-		max-speed = <3200000>;
-		firmware-name = "crnv21.bin";
-		clocks = <&rpmhcc RPMH_RF_CLK2>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
new file mode 100644
index 0000000..772689b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/qualcomm-bluetooth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Bluetooth Chips
+
+maintainers:
+  - Balakrishna Godavarthi <bgodavar@codeaurora.org>
+  - Rocky Liao <rjliao@codeaurora.org>
+
+description:
+  This binding describes Qualcomm UART-attached bluetooth chips.
+
+properties:
+  compatible:
+    enum:
+      - qcom,qca6174-bt
+      - qcom,qca9377-bt
+      - qcom,wcn3990-bt
+      - qcom,wcn3991-bt
+      - qcom,wcn3998-bt
+      - qcom,qca6390-bt
+
+  enable-gpios:
+    maxItems: 1
+    description: gpio specifier used to enable chip
+
+  clocks:
+    maxItems: 1
+    description: clock provided to the controller (SUSCLK_32KHZ)
+
+  vddio-supply:
+    description: VDD_IO supply regulator handle
+
+  vddxo-supply:
+    description: VDD_XO supply regulator handle
+
+  vddrf-supply:
+    description: VDD_RF supply regulator handle
+
+  vddch0-supply:
+    description: VDD_CH0 supply regulator handle
+
+  max-speed:
+    description: see Documentation/devicetree/bindings/serial/serial.yaml
+
+  firmware-name:
+    description: specify the name of nvm firmware to load
+
+  local-bd-address:
+    description: see Documentation/devicetree/bindings/net/bluetooth.txt
+
+
+required:
+  - compatible
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qca6174-bt
+    then:
+      required:
+        - enable-gpios
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,wcn3990-bt
+              - qcom,wcn3991-bt
+              - qcom,wcn3998-bt
+    then:
+      required:
+        - vddio-supply
+        - vddxo-supply
+        - vddrf-supply
+        - vddch0-supply
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    serial {
+
+        bluetooth {
+            compatible = "qcom,qca6174-bt";
+            enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+            clocks = <&divclk4>;
+            firmware-name = "nvm_00440302.bin";
+        };
+    };
+  - |
+    serial {
+
+        bluetooth {
+            compatible = "qcom,wcn3990-bt";
+            vddio-supply = <&vreg_s4a_1p8>;
+            vddxo-supply = <&vreg_l7a_1p8>;
+            vddrf-supply = <&vreg_l17a_1p3>;
+            vddch0-supply = <&vreg_l25a_3p3>;
+            max-speed = <3200000>;
+            firmware-name = "crnv21.bin";
+        };
+    };
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation


  parent reply	other threads:[~2021-05-18 16:35 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-18 16:34 [PATCH v4 0/5] Enable Bluetooth functionality for WCN6750 Venkata Lakshmi Narayana Gubba
2021-05-18 16:34 ` [PATCH v4 1/5] Bluetooth: hci_qca: Add support for QTI Bluetooth chip wcn6750 Venkata Lakshmi Narayana Gubba
2021-05-18 16:34 ` [PATCH v4 2/5] Bluetooth: btqca: Add support for firmware image with mbn type for WCN6750 Venkata Lakshmi Narayana Gubba
2021-05-18 16:34 ` [PATCH v4 3/5] Bluetooth: btqca: Moved extracting rom version info to common place Venkata Lakshmi Narayana Gubba
2021-05-18 16:34 ` Venkata Lakshmi Narayana Gubba [this message]
2021-05-19 18:41   ` [PATCH v4 4/5] dt-bindings: net: bluetooth: Convert Qualcomm BT binding to DT schema Rob Herring
2021-05-18 16:34 ` [PATCH v4 5/5] dt-bindings: net: bluetooth: Add device tree bindings for QTI chip wcn6750 Venkata Lakshmi Narayana Gubba
2021-05-19 18:41   ` Rob Herring
2021-05-20 15:10 ` [PATCH v4 0/5] Enable Bluetooth functionality for WCN6750 Marcel Holtmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1621355686-29550-5-git-send-email-gubbaven@codeaurora.org \
    --to=gubbaven@codeaurora.org \
    --cc=abhishekpandit@chromium.org \
    --cc=bgodavar@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=hbandi@codeaurora.org \
    --cc=hemantg@codeaurora.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcel@holtmann.org \
    --cc=mka@chromium.org \
    --cc=rjliao@codeaurora.org \
    --subject='Re: [PATCH v4 4/5] dt-bindings: net: bluetooth: Convert Qualcomm BT binding to DT schema' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).