linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: Rob Herring <robh+dt@kernel.org>,
	Sander Vanheule <sander@svanheule.net>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	devicetree@vger.kernel.org, Pavel Machek <pavel@ucw.cz>,
	Lee Jones <lee.jones@linaro.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	linux-gpio@vger.kernel.org, Michael Walle <michael@walle.cc>,
	linux-leds@vger.kernel.org,
	"Rafael J . Wysocki" <rafael@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mark Brown <broonie@kernel.org>,
	linux-kernel@vger.kernel.org,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>
Subject: Re: (subset) [PATCH v2 0/7] RTL8231 GPIO expander support
Date: Wed, 19 May 2021 17:10:13 +0100	[thread overview]
Message-ID: <162144031656.37163.14427082237323398944.b4-ty@kernel.org> (raw)
In-Reply-To: <cover.1621279162.git.sander@svanheule.net>

On Mon, 17 May 2021 21:28:02 +0200, Sander Vanheule wrote:
> The RTL8231 GPIO and LED expander can be configured for use as an MDIO or SMI
> bus device. Currently only the MDIO mode is supported, although SMI mode
> support should be fairly straightforward, once an SMI bus driver is available.
> 
> Provided features by the RTL8231:
>   - Up to 37 GPIOs
>     - Configurable drive strength: 8mA or 4mA (currently unsupported)
>     - Input debouncing on high GPIOs (currently unsupported)
>   - Up to 88 LEDs in multiple scan matrix groups
>     - On, off, or one of six toggling intervals
>     - "single-color mode": 2×36 single color LEDs + 8 bi-color LEDs
>     - "bi-color mode": (12 + 2×6) bi-color LEDs + 24 single color LEDs
>   - Up to one PWM output (currently unsupported)
>     - Fixed duty cycle, 8 selectable frequencies (1.2kHz - 4.8kHz)
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git for-next

Thanks!

[1/7] regmap: Add MDIO bus support
      commit: 1f89d2fe16072a74b34bdb895160910091427891

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

  parent reply	other threads:[~2021-05-19 16:11 UTC|newest]

Thread overview: 114+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-11 12:25 [PATCH 0/5] RTL8231 GPIO expander support Sander Vanheule
2021-05-11 12:25 ` [PATCH 1/5] dt-bindings: leds: Binding for RTL8231 scan matrix Sander Vanheule
2021-05-17 22:31   ` Rob Herring
2021-05-19 16:39     ` Sander Vanheule
2021-05-11 12:25 ` [PATCH 2/5] dt-bindings: mfd: Binding for RTL8231 Sander Vanheule
2021-05-17 22:38   ` Rob Herring
2021-05-19 16:53     ` Sander Vanheule
2021-05-11 12:25 ` [PATCH 3/5] mfd: Add RTL8231 core device Sander Vanheule
2021-05-12 12:29   ` kernel test robot
2021-05-12 13:13   ` kernel test robot
2021-05-19 14:58     ` Lee Jones
2021-05-19 15:11       ` Sander Vanheule
2021-05-11 12:25 ` [PATCH 4/5] pinctrl: Add RTL8231 pin control and GPIO support Sander Vanheule
2021-05-11 12:25 ` [PATCH 5/5] leds: Add support for RTL8231 LED scan matrix Sander Vanheule
     [not found] ` <CAHp75VffoKyyPJbdtKMLx575c9LT0S8+EHOk7Mw36j=aTL6Q4Q@mail.gmail.com>
2021-05-16 21:40   ` [PATCH 0/5] RTL8231 GPIO expander support Sander Vanheule
2021-05-17  8:13     ` Andy Shevchenko
2021-05-17  8:50       ` Sander Vanheule
2021-05-17 19:32     ` Sander Vanheule
2021-05-17 19:28 ` [PATCH v2 0/7] " Sander Vanheule
2021-05-17 19:28   ` [PATCH v2 1/7] regmap: Add MDIO bus support Sander Vanheule
2021-05-19 16:12     ` Mark Brown
2021-05-17 19:28   ` [PATCH v2 2/7] gpio: regmap: Add configurable dir/value order Sander Vanheule
2021-05-17 21:06     ` Andy Shevchenko
2021-05-18  1:40     ` Andrew Lunn
2021-05-18 11:39       ` Sander Vanheule
2021-05-23 22:21       ` Sander Vanheule
2021-05-18  8:39     ` Michael Walle
2021-05-18 10:39       ` Andy Shevchenko
2021-05-23 21:19       ` Sander Vanheule
2021-05-17 19:28   ` [PATCH v2 3/7] dt-bindings: leds: Binding for RTL8231 scan matrix Sander Vanheule
2021-05-17 19:28   ` [PATCH v2 4/7] dt-bindings: mfd: Binding for RTL8231 Sander Vanheule
2021-05-18 22:02     ` Linus Walleij
2021-05-17 19:28   ` [PATCH v2 5/7] mfd: Add RTL8231 core device Sander Vanheule
2021-05-17 21:18     ` Andy Shevchenko
2021-05-23 21:28       ` Sander Vanheule
2021-05-24  7:49         ` Andy Shevchenko
2021-05-24  7:50       ` Sander Vanheule
2021-05-24  7:55         ` Andy Shevchenko
2021-05-24  8:04           ` Sander Vanheule
2021-05-17 19:28   ` [PATCH v2 6/7] pinctrl: Add RTL8231 pin control and GPIO support Sander Vanheule
2021-05-17 21:42     ` Andy Shevchenko
2021-05-17 21:46       ` Andy Shevchenko
2021-05-23 21:42       ` Sander Vanheule
2021-05-17 19:28   ` [PATCH v2 7/7] leds: Add support for RTL8231 LED scan matrix Sander Vanheule
2021-05-17 22:00     ` Andy Shevchenko
2021-05-23 21:53       ` Sander Vanheule
2021-05-19 16:10   ` Mark Brown [this message]
2021-05-23 22:33 ` [PATCH v3 0/6] RTL8231 GPIO expander support Sander Vanheule
2021-05-23 22:33   ` [PATCH v3 1/6] gpio: regmap: Add quirk for output data register Sander Vanheule
2021-05-28  6:40     ` Michael Walle
2021-06-03 10:03       ` Sander Vanheule
2021-05-31  7:25     ` Bartosz Golaszewski
2021-05-23 22:34   ` [PATCH v3 2/6] dt-bindings: leds: Binding for RTL8231 scan matrix Sander Vanheule
2021-06-02 18:58     ` Rob Herring
2021-05-23 22:34   ` [PATCH v3 3/6] dt-bindings: mfd: Binding for RTL8231 Sander Vanheule
2021-05-27 23:31     ` Linus Walleij
2021-06-02 19:02     ` Rob Herring
2021-05-23 22:34   ` [PATCH v3 4/6] mfd: Add RTL8231 core device Sander Vanheule
2021-05-24  8:02     ` Andy Shevchenko
2021-05-24  8:23       ` Sander Vanheule
2021-05-24 10:18         ` Andy Shevchenko
2021-05-24 11:41           ` Sander Vanheule
2021-05-23 22:34   ` [PATCH v3 5/6] pinctrl: Add RTL8231 pin control and GPIO support Sander Vanheule
2021-05-28  6:29     ` Michael Walle
2021-05-28  6:42       ` Sander Vanheule
2021-05-28  6:43         ` Michael Walle
2021-05-23 22:34   ` [PATCH v3 6/6] leds: Add support for RTL8231 LED scan matrix Sander Vanheule
2021-05-24 10:24     ` Andy Shevchenko
2021-05-24 12:04       ` Sander Vanheule
2021-05-24 12:47         ` Andy Shevchenko
2021-05-24 15:30           ` Sander Vanheule
2021-05-24  1:10   ` [PATCH v3 0/6] RTL8231 GPIO expander support Andrew Lunn
2021-05-24  7:53     ` Andy Shevchenko
2021-05-24 11:41       ` Sander Vanheule
2021-05-24 12:54         ` Andy Shevchenko
2021-05-24 15:03           ` Sander Vanheule
2021-05-24 16:30             ` Andy Shevchenko
2021-05-25 17:11               ` Andy Shevchenko
2021-05-25 18:00                 ` Sander Vanheule
2021-05-26 21:02                 ` Sander Vanheule
2021-05-27 10:38                   ` Andy Shevchenko
2021-05-27 10:41                     ` Hans de Goede
2021-05-24 15:20           ` Sander Vanheule
2021-05-28  6:37         ` Michael Walle
2021-05-30 16:19           ` Sander Vanheule
2021-05-30 16:51             ` Hans de Goede
2021-05-30 18:16               ` Andy Shevchenko
2021-05-30 21:22                 ` Michael Walle
2021-05-31  8:36                   ` Sander Vanheule
2021-05-31 10:02                     ` Michael Walle
     [not found]                       ` <CAHp75VfOrUBRQH1vrXEwHN4ZPojQfQju-_wp_3djZeozEaatug@mail.gmail.com>
2021-05-31 15:33                         ` [PATCH 0/5] " Sander Vanheule
2021-05-31 15:48                           ` Andy Shevchenko
2021-06-01 11:49                             ` Michael Walle
2021-06-01 15:24                               ` Andy Shevchenko
2021-06-02 20:20                                 ` Sander Vanheule
2021-06-01  9:59                 ` [PATCH v3 0/6] " Linus Walleij
2021-06-01 10:18                   ` Michael Walle
2021-06-01 10:51                     ` Linus Walleij
2021-06-01 11:41                       ` Michael Walle
2021-06-01 11:48                         ` Linus Walleij
2021-06-03 10:00 ` [PATCH v4 0/5] " Sander Vanheule
2021-06-03 10:00   ` [PATCH v4 1/5] dt-bindings: leds: Binding for RTL8231 scan matrix Sander Vanheule
2021-06-03 10:00   ` [PATCH v4 2/5] dt-bindings: mfd: Binding for RTL8231 Sander Vanheule
2021-06-03 10:00   ` [PATCH v4 3/5] mfd: Add RTL8231 core device Sander Vanheule
2021-06-03 10:58     ` Andy Shevchenko
2021-06-03 11:28       ` Sander Vanheule
2021-06-03 14:03         ` Andrew Lunn
2021-06-03 15:20           ` Sander Vanheule
2021-06-05 11:07       ` Sander Vanheule
2021-06-03 10:00   ` [PATCH v4 4/5] pinctrl: Add RTL8231 pin control and GPIO support Sander Vanheule
2021-06-03 10:18     ` Andy Shevchenko
2021-06-04 22:10     ` Linus Walleij
2021-06-03 10:00   ` [PATCH v4 5/5] leds: Add support for RTL8231 LED scan matrix Sander Vanheule
2021-06-03 11:01     ` Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=162144031656.37163.14427082237323398944.b4-ty@kernel.org \
    --to=broonie@kernel.org \
    --cc=andrew@lunn.ch \
    --cc=andy.shevchenko@gmail.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=lee.jones@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=michael@walle.cc \
    --cc=pavel@ucw.cz \
    --cc=rafael@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sander@svanheule.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).