From: Kewei Xu <kewei.xu@mediatek.com>
To: <wsa@the-dreams.de>
Cc: <matthias.bgg@gmail.com>, <robh+dt@kernel.org>,
<linux-i2c@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
<linux-mediatek@lists.infradead.org>,
<srv_heupstream@mediatek.com>, <leilk.liu@mediatek.com>,
<qii.wang@mediatek.com>, <qiangming.xia@mediatek.com>,
<kewei.xu@mediatek.com>
Subject: [PATCH 2/3] i2c: mediatek: Dump i2c/dma register when a timeout occurs
Date: Tue, 8 Jun 2021 11:16:39 +0800 [thread overview]
Message-ID: <1623122200-1896-3-git-send-email-kewei.xu@mediatek.com> (raw)
In-Reply-To: <1623122200-1896-1-git-send-email-kewei.xu@mediatek.com>
From: "Kewei.Xu" <kewei.xu@mediatek.com>
When a timeout error occurs in i2c transter, it is usually related
to the i2c/dma IP hardware configuration. Therefore, the purpose of
this patch is to dump the key register values of i2c/dma when a
timeout occurs in i2c for debugging.
Signed-off-by: Kewei.Xu <kewei.xu@mediatek.com>
---
drivers/i2c/busses/i2c-mt65xx.c | 97 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 95 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 5ddfa4e..e65a41e 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -125,6 +125,7 @@ enum I2C_REGS_OFFSET {
OFFSET_HS,
OFFSET_SOFTRESET,
OFFSET_DCM_EN,
+ OFFSET_MULTI_DMA,
OFFSET_PATH_DIR,
OFFSET_DEBUGSTAT,
OFFSET_DEBUGCTRL,
@@ -192,8 +193,9 @@ enum I2C_REGS_OFFSET {
[OFFSET_TRANSFER_LEN_AUX] = 0x44,
[OFFSET_CLOCK_DIV] = 0x48,
[OFFSET_SOFTRESET] = 0x50,
+ [OFFSET_MULTI_DMA] = 0x84,
[OFFSET_SCL_MIS_COMP_POINT] = 0x90,
- [OFFSET_DEBUGSTAT] = 0xe0,
+ [OFFSET_DEBUGSTAT] = 0xe4,
[OFFSET_DEBUGCTRL] = 0xe8,
[OFFSET_FIFO_STAT] = 0xf4,
[OFFSET_FIFO_THRESH] = 0xf8,
@@ -828,6 +830,96 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
return 0;
}
+static void i2c_dump_register(struct mtk_i2c *i2c)
+{
+ dev_err(i2c->dev, "SLAVE_ADDR[0x%x]: 0x%x, INTR_MASK[0x%x]: 0x%x\n",
+ OFFSET_SLAVE_ADDR,
+ (mtk_i2c_readw(i2c, OFFSET_SLAVE_ADDR)),
+ OFFSET_INTR_MASK,
+ (mtk_i2c_readw(i2c, OFFSET_INTR_MASK)));
+ dev_err(i2c->dev, "INTR_STAT[0x%x]: 0x%x, CONTROL[0x%x]: 0x%x\n",
+ OFFSET_INTR_STAT,
+ (mtk_i2c_readw(i2c, OFFSET_INTR_STAT)),
+ OFFSET_CONTROL,
+ (mtk_i2c_readw(i2c, OFFSET_CONTROL)));
+ dev_err(i2c->dev, "TRANSFER_LEN[0x%x]: 0x%x, TRANSAC_LEN[0x%x]: 0x%x\n",
+ OFFSET_TRANSFER_LEN,
+ (mtk_i2c_readw(i2c, OFFSET_TRANSFER_LEN)),
+ OFFSET_TRANSAC_LEN,
+ (mtk_i2c_readw(i2c, OFFSET_TRANSAC_LEN)));
+ dev_err(i2c->dev, "DELAY_LEN[0x%x]: 0x%x, HTIMING[0x%x]: 0x%x\n",
+ OFFSET_DELAY_LEN,
+ (mtk_i2c_readw(i2c, OFFSET_DELAY_LEN)),
+ OFFSET_TIMING,
+ (mtk_i2c_readw(i2c, OFFSET_TIMING)));
+ dev_err(i2c->dev, "OFFSET_START[0x%x]: 0x%x\n",
+ OFFSET_START,
+ mtk_i2c_readw(i2c, OFFSET_START));
+ dev_err(i2c->dev, "OFFSET_EXT_CONF[0x%x]: 0x%x\n",
+ OFFSET_EXT_CONF,
+ mtk_i2c_readw(i2c, OFFSET_EXT_CONF));
+ dev_err(i2c->dev, "OFFSET_HS[0x%x]: 0x%x\n",
+ OFFSET_HS,
+ mtk_i2c_readw(i2c, OFFSET_HS));
+ dev_err(i2c->dev, "OFFSET_IO_CONFIG[0x%x]: 0x%x\n",
+ OFFSET_IO_CONFIG,
+ mtk_i2c_readw(i2c, OFFSET_IO_CONFIG));
+ dev_err(i2c->dev, "OFFSET_FIFO_ADDR_CLR[0x%x]: 0x%x\n",
+ OFFSET_FIFO_ADDR_CLR,
+ mtk_i2c_readw(i2c, OFFSET_FIFO_ADDR_CLR));
+ dev_err(i2c->dev, "TRANSFER_LEN_AUX[0x%x]: 0x%x\n",
+ OFFSET_TRANSFER_LEN_AUX,
+ mtk_i2c_readw(i2c, OFFSET_TRANSFER_LEN_AUX));
+ dev_err(i2c->dev, "CLOCK_DIV[0x%x]: 0x%x\n",
+ OFFSET_CLOCK_DIV,
+ mtk_i2c_readw(i2c, OFFSET_CLOCK_DIV));
+ dev_err(i2c->dev, "FIFO_STAT[0x%x]: 0x%x, FIFO_THRESH[0x%x]: 0x%x\n",
+ OFFSET_FIFO_STAT,
+ mtk_i2c_readw(i2c, OFFSET_FIFO_STAT),
+ OFFSET_FIFO_THRESH,
+ mtk_i2c_readw(i2c, OFFSET_FIFO_THRESH));
+ dev_err(i2c->dev, "DCM_EN[0x%x] 0x%x\n",
+ OFFSET_DCM_EN,
+ mtk_i2c_readw(i2c, OFFSET_DCM_EN));
+ dev_err(i2c->dev, "DEBUGSTAT[0x%x]: 0x%x, DEBUGCTRL[0x%x]: 0x%x\n",
+ OFFSET_DEBUGSTAT,
+ (mtk_i2c_readw(i2c, OFFSET_DEBUGSTAT)),
+ OFFSET_DEBUGCTRL,
+ (mtk_i2c_readw(i2c, OFFSET_DEBUGCTRL)));
+
+ if (i2c->dev_comp->regs == mt_i2c_regs_v2) {
+ dev_err(i2c->dev, "OFFSET_LTIMING[0x%x]: 0x%x\n",
+ OFFSET_LTIMING,
+ mtk_i2c_readw(i2c, OFFSET_LTIMING));
+ dev_err(i2c->dev, "MULTI_DMA[0x%x]: 0x%x\n",
+ OFFSET_MULTI_DMA,
+ (mtk_i2c_readw(i2c, OFFSET_MULTI_DMA)));
+ }
+
+ dev_err(i2c->dev, "OFFSET_INT_FLAG = 0x%x\n",
+ readl(i2c->pdmabase + OFFSET_INT_FLAG));
+ dev_err(i2c->dev, "OFFSET_INT_EN = 0x%x\n",
+ readl(i2c->pdmabase + OFFSET_INT_EN));
+ dev_err(i2c->dev, "OFFSET_EN = 0x%x\n",
+ readl(i2c->pdmabase + OFFSET_EN));
+ dev_err(i2c->dev, "OFFSET_RST = 0x%x\n",
+ readl(i2c->pdmabase + OFFSET_RST));
+ dev_err(i2c->dev, "OFFSET_CON = 0x%x\n",
+ readl(i2c->pdmabase + OFFSET_CON));
+ dev_err(i2c->dev, "OFFSET_TX_MEM_ADDR = 0x%x\n",
+ readl(i2c->pdmabase + OFFSET_TX_MEM_ADDR));
+ dev_err(i2c->dev, "OFFSET_RX_MEM_ADDR = 0x%x\n",
+ readl(i2c->pdmabase + OFFSET_RX_MEM_ADDR));
+ dev_err(i2c->dev, "OFFSET_TX_LEN = 0x%x\n",
+ readl(i2c->pdmabase + OFFSET_TX_LEN));
+ dev_err(i2c->dev, "OFFSET_RX_LEN = 0x%x\n",
+ readl(i2c->pdmabase + OFFSET_RX_LEN));
+ dev_err(i2c->dev, "OFFSET_TX_4G_MODE = 0x%x\n",
+ readl(i2c->pdmabase + OFFSET_TX_4G_MODE));
+ dev_err(i2c->dev, "OFFSET_RX_4G_MODE = 0x%x\n",
+ readl(i2c->pdmabase + OFFSET_RX_4G_MODE));
+}
+
static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
int num, int left_num)
{
@@ -1034,7 +1126,8 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
}
if (ret == 0) {
- dev_dbg(i2c->dev, "addr: %x, transfer timeout\n", msgs->addr);
+ dev_err(i2c->dev, "addr: %x, transfer timeout\n", msgs->addr);
+ i2c_dump_register(i2c);
mtk_i2c_init_hw(i2c);
return -ETIMEDOUT;
}
--
1.9.1
next prev parent reply other threads:[~2021-06-08 3:17 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-08 3:16 [PATCH 0/3] add i2c support for mt8195 Kewei Xu
2021-06-08 3:16 ` [PATCH 1/3] dt-bindings: i2c: update bindings for MT8195 SoC Kewei Xu
2021-06-08 13:59 ` Matthias Brugger
2021-06-18 20:27 ` Rob Herring
2021-06-08 3:16 ` Kewei Xu [this message]
2021-06-08 14:01 ` [PATCH 2/3] i2c: mediatek: Dump i2c/dma register when a timeout occurs Matthias Brugger
2021-06-09 2:43 ` Kewei Xu
2021-06-29 4:19 ` Tzung-Bi Shih
2021-06-29 12:12 ` Kewei Xu
2021-06-08 3:16 ` [PATCH 3/3] i2c: mediatek: Reset the handshake signal between i2c and dma Kewei Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1623122200-1896-3-git-send-email-kewei.xu@mediatek.com \
--to=kewei.xu@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=leilk.liu@mediatek.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=qiangming.xia@mediatek.com \
--cc=qii.wang@mediatek.com \
--cc=robh+dt@kernel.org \
--cc=srv_heupstream@mediatek.com \
--cc=wsa@the-dreams.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).