linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
To: Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Matthias Brugger <matthias.bgg@gmail.com>
Cc: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<srv_heupstream@mediatek.com>,
	<Project_Global_Chrome_Upstream_Group@mediatek.com>
Subject: [PATCH v9 3/5] spmi: mediatek: Add support for MT6873/8192
Date: Sun, 4 Jul 2021 11:06:56 +0800	[thread overview]
Message-ID: <1625368018-17505-4-git-send-email-hsin-hsiung.wang@mediatek.com> (raw)
In-Reply-To: <1625368018-17505-1-git-send-email-hsin-hsiung.wang@mediatek.com>

Add spmi support for MT6873/8192.

Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
---
changes since v8:
- No change.
---
 drivers/spmi/Kconfig         |  10 +
 drivers/spmi/Makefile        |   2 +
 drivers/spmi/spmi-mtk-pmif.c | 465 +++++++++++++++++++++++++++++++++++
 3 files changed, 477 insertions(+)
 create mode 100644 drivers/spmi/spmi-mtk-pmif.c

diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig
index a53bad541f1a..692bac98a120 100644
--- a/drivers/spmi/Kconfig
+++ b/drivers/spmi/Kconfig
@@ -25,4 +25,14 @@ config SPMI_MSM_PMIC_ARB
 	  This is required for communicating with Qualcomm PMICs and
 	  other devices that have the SPMI interface.
 
+config SPMI_MTK_PMIF
+	tristate "Mediatek SPMI Controller (PMIC Arbiter)"
+	help
+	  If you say yes to this option, support will be included for the
+	  built-in SPMI PMIC Arbiter interface on Mediatek family
+	  processors.
+
+	  This is required for communicating with Mediatek PMICs and
+	  other devices that have the SPMI interface.
+
 endif
diff --git a/drivers/spmi/Makefile b/drivers/spmi/Makefile
index 55a94cadeffe..76fb3b3ab510 100644
--- a/drivers/spmi/Makefile
+++ b/drivers/spmi/Makefile
@@ -5,3 +5,5 @@
 obj-$(CONFIG_SPMI)	+= spmi.o
 
 obj-$(CONFIG_SPMI_MSM_PMIC_ARB)	+= spmi-pmic-arb.o
+obj-$(CONFIG_SPMI_MTK_PMIF)	+= spmi-mtk-pmif.o
+
diff --git a/drivers/spmi/spmi-mtk-pmif.c b/drivers/spmi/spmi-mtk-pmif.c
new file mode 100644
index 000000000000..94c45d46ab0c
--- /dev/null
+++ b/drivers/spmi/spmi-mtk-pmif.c
@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2021 MediaTek Inc.
+
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/spmi.h>
+
+#define SWINF_IDLE	0x00
+#define SWINF_WFVLDCLR	0x06
+
+#define GET_SWINF(x)	(((x) >> 1) & 0x7)
+
+#define PMIF_CMD_REG_0		0
+#define PMIF_CMD_REG		1
+#define PMIF_CMD_EXT_REG	2
+#define PMIF_CMD_EXT_REG_LONG	3
+
+#define PMIF_DELAY_US   10
+#define PMIF_TIMEOUT_US (10 * 1000)
+
+#define PMIF_CHAN_OFFSET 0x5
+
+#define PMIF_MAX_CLKS	3
+
+#define SPMI_OP_ST_BUSY 1
+
+struct ch_reg {
+	u32 ch_sta;
+	u32 wdata;
+	u32 rdata;
+	u32 ch_send;
+	u32 ch_rdy;
+};
+
+struct pmif_data {
+	const u32	*regs;
+	const u32	*spmimst_regs;
+	u32	soc_chan;
+};
+
+struct pmif {
+	void __iomem	*base;
+	void __iomem	*spmimst_base;
+	struct ch_reg	chan;
+	struct clk_bulk_data clks[PMIF_MAX_CLKS];
+	u32 nclks;
+	const struct pmif_data *data;
+};
+
+static const char * const pmif_clock_names[] = {
+	"pmif_sys_ck", "pmif_tmr_ck", "spmimst_clk_mux",
+};
+
+enum pmif_regs {
+	PMIF_INIT_DONE,
+	PMIF_INF_EN,
+	PMIF_ARB_EN,
+	PMIF_CMDISSUE_EN,
+	PMIF_TIMER_CTRL,
+	PMIF_SPI_MODE_CTRL,
+	PMIF_IRQ_EVENT_EN_0,
+	PMIF_IRQ_FLAG_0,
+	PMIF_IRQ_CLR_0,
+	PMIF_IRQ_EVENT_EN_1,
+	PMIF_IRQ_FLAG_1,
+	PMIF_IRQ_CLR_1,
+	PMIF_IRQ_EVENT_EN_2,
+	PMIF_IRQ_FLAG_2,
+	PMIF_IRQ_CLR_2,
+	PMIF_IRQ_EVENT_EN_3,
+	PMIF_IRQ_FLAG_3,
+	PMIF_IRQ_CLR_3,
+	PMIF_IRQ_EVENT_EN_4,
+	PMIF_IRQ_FLAG_4,
+	PMIF_IRQ_CLR_4,
+	PMIF_WDT_EVENT_EN_0,
+	PMIF_WDT_FLAG_0,
+	PMIF_WDT_EVENT_EN_1,
+	PMIF_WDT_FLAG_1,
+	PMIF_SWINF_0_STA,
+	PMIF_SWINF_0_WDATA_31_0,
+	PMIF_SWINF_0_RDATA_31_0,
+	PMIF_SWINF_0_ACC,
+	PMIF_SWINF_0_VLD_CLR,
+	PMIF_SWINF_1_STA,
+	PMIF_SWINF_1_WDATA_31_0,
+	PMIF_SWINF_1_RDATA_31_0,
+	PMIF_SWINF_1_ACC,
+	PMIF_SWINF_1_VLD_CLR,
+	PMIF_SWINF_2_STA,
+	PMIF_SWINF_2_WDATA_31_0,
+	PMIF_SWINF_2_RDATA_31_0,
+	PMIF_SWINF_2_ACC,
+	PMIF_SWINF_2_VLD_CLR,
+	PMIF_SWINF_3_STA,
+	PMIF_SWINF_3_WDATA_31_0,
+	PMIF_SWINF_3_RDATA_31_0,
+	PMIF_SWINF_3_ACC,
+	PMIF_SWINF_3_VLD_CLR,
+};
+
+static const u32 mt6873_regs[] = {
+	[PMIF_INIT_DONE] =	0x0000,
+	[PMIF_INF_EN] =		0x0024,
+	[PMIF_ARB_EN] =		0x0150,
+	[PMIF_CMDISSUE_EN] =	0x03B4,
+	[PMIF_TIMER_CTRL] =	0x03E0,
+	[PMIF_SPI_MODE_CTRL] =	0x0400,
+	[PMIF_IRQ_EVENT_EN_0] =	0x0418,
+	[PMIF_IRQ_FLAG_0] =	0x0420,
+	[PMIF_IRQ_CLR_0] =	0x0424,
+	[PMIF_IRQ_EVENT_EN_1] =	0x0428,
+	[PMIF_IRQ_FLAG_1] =	0x0430,
+	[PMIF_IRQ_CLR_1] =	0x0434,
+	[PMIF_IRQ_EVENT_EN_2] =	0x0438,
+	[PMIF_IRQ_FLAG_2] =	0x0440,
+	[PMIF_IRQ_CLR_2] =	0x0444,
+	[PMIF_IRQ_EVENT_EN_3] =	0x0448,
+	[PMIF_IRQ_FLAG_3] =	0x0450,
+	[PMIF_IRQ_CLR_3] =	0x0454,
+	[PMIF_IRQ_EVENT_EN_4] =	0x0458,
+	[PMIF_IRQ_FLAG_4] =	0x0460,
+	[PMIF_IRQ_CLR_4] =	0x0464,
+	[PMIF_WDT_EVENT_EN_0] =	0x046C,
+	[PMIF_WDT_FLAG_0] =	0x0470,
+	[PMIF_WDT_EVENT_EN_1] =	0x0474,
+	[PMIF_WDT_FLAG_1] =	0x0478,
+	[PMIF_SWINF_0_ACC] =	0x0C00,
+	[PMIF_SWINF_0_WDATA_31_0] =	0x0C04,
+	[PMIF_SWINF_0_RDATA_31_0] =	0x0C14,
+	[PMIF_SWINF_0_VLD_CLR] =	0x0C24,
+	[PMIF_SWINF_0_STA] =	0x0C28,
+	[PMIF_SWINF_1_ACC] =	0x0C40,
+	[PMIF_SWINF_1_WDATA_31_0] =	0x0C44,
+	[PMIF_SWINF_1_RDATA_31_0] =	0x0C54,
+	[PMIF_SWINF_1_VLD_CLR] =	0x0C64,
+	[PMIF_SWINF_1_STA] =	0x0C68,
+	[PMIF_SWINF_2_ACC] =	0x0C80,
+	[PMIF_SWINF_2_WDATA_31_0] =	0x0C84,
+	[PMIF_SWINF_2_RDATA_31_0] =	0x0C94,
+	[PMIF_SWINF_2_VLD_CLR] =	0x0CA4,
+	[PMIF_SWINF_2_STA] =	0x0CA8,
+	[PMIF_SWINF_3_ACC] =	0x0CC0,
+	[PMIF_SWINF_3_WDATA_31_0] =	0x0CC4,
+	[PMIF_SWINF_3_RDATA_31_0] =	0x0CD4,
+	[PMIF_SWINF_3_VLD_CLR] =	0x0CE4,
+	[PMIF_SWINF_3_STA] =	0x0CE8,
+};
+
+enum spmi_regs {
+	SPMI_OP_ST_CTRL,
+	SPMI_GRP_ID_EN,
+	SPMI_OP_ST_STA,
+	SPMI_MST_SAMPL,
+	SPMI_MST_REQ_EN,
+	SPMI_REC_CTRL,
+	SPMI_REC0,
+	SPMI_REC1,
+	SPMI_REC2,
+	SPMI_REC3,
+	SPMI_REC4,
+	SPMI_MST_DBG,
+};
+
+static const u32 mt6873_spmi_regs[] = {
+	[SPMI_OP_ST_CTRL] =	0x0000,
+	[SPMI_GRP_ID_EN] =	0x0004,
+	[SPMI_OP_ST_STA] =	0x0008,
+	[SPMI_MST_SAMPL] =	0x000c,
+	[SPMI_MST_REQ_EN] =	0x0010,
+	[SPMI_REC_CTRL] =	0x0040,
+	[SPMI_REC0] =		0x0044,
+	[SPMI_REC1] =		0x0048,
+	[SPMI_REC2] =		0x004c,
+	[SPMI_REC3] =		0x0050,
+	[SPMI_REC4] =		0x0054,
+	[SPMI_MST_DBG] =	0x00fc,
+};
+
+static u32 pmif_readl(struct pmif *arb, enum pmif_regs reg)
+{
+	return readl(arb->base + arb->data->regs[reg]);
+}
+
+static void pmif_writel(struct pmif *arb, u32 val, enum pmif_regs reg)
+{
+	writel(val, arb->base + arb->data->regs[reg]);
+}
+
+static void mtk_spmi_writel(struct pmif *arb, u32 val, enum spmi_regs reg)
+{
+	writel(val, arb->spmimst_base + arb->data->spmimst_regs[reg]);
+}
+
+static bool pmif_is_fsm_vldclr(struct pmif *arb)
+{
+	u32 reg_rdata;
+
+	reg_rdata = pmif_readl(arb, arb->chan.ch_sta);
+	return GET_SWINF(reg_rdata) == SWINF_WFVLDCLR;
+}
+
+static int pmif_arb_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid)
+{
+	struct pmif *arb = spmi_controller_get_drvdata(ctrl);
+	u32 rdata, cmd;
+	int ret;
+
+	/* Check the opcode */
+	if (opc < SPMI_CMD_RESET || opc > SPMI_CMD_WAKEUP)
+		return -EINVAL;
+
+	cmd = opc - SPMI_CMD_RESET;
+
+	mtk_spmi_writel(arb, (cmd << 0x4) | sid, SPMI_OP_ST_CTRL);
+	ret = readl_poll_timeout_atomic(arb->spmimst_base + arb->data->spmimst_regs[SPMI_OP_ST_STA],
+					rdata, (rdata & SPMI_OP_ST_BUSY) == SPMI_OP_ST_BUSY,
+					PMIF_DELAY_US, PMIF_TIMEOUT_US);
+	if (ret < 0)
+		dev_err(&ctrl->dev, "timeout, err = %d\n", ret);
+
+	return ret;
+}
+
+static int pmif_spmi_read_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
+			      u16 addr, u8 *buf, size_t len)
+{
+	struct pmif *arb = spmi_controller_get_drvdata(ctrl);
+	struct ch_reg *inf_reg;
+	int ret;
+	u32 data, cmd;
+
+	/* Check for argument validation. */
+	if (sid & ~0xf) {
+		dev_err(&ctrl->dev, "exceed the max slv id\n");
+		return -EINVAL;
+	}
+
+	if (len > 4) {
+		dev_err(&ctrl->dev, "pmif supports 1..4 bytes per trans, but:%zu requested", len);
+		return -EINVAL;
+	}
+
+	if (opc >= 0x60 && opc <= 0x7f)
+		opc = PMIF_CMD_REG;
+	else if ((opc >= 0x20 && opc <= 0x2f) || (opc >= 0x38 && opc <= 0x3f))
+		opc = PMIF_CMD_EXT_REG_LONG;
+	else
+		return -EINVAL;
+
+	/* Wait for Software Interface FSM state to be IDLE. */
+	inf_reg = &arb->chan;
+	ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta],
+					data, GET_SWINF(data) == SWINF_IDLE,
+					PMIF_DELAY_US, PMIF_TIMEOUT_US);
+	if (ret < 0) {
+		/* set channel ready if the data has transferred */
+		if (pmif_is_fsm_vldclr(arb))
+			pmif_writel(arb, 1, inf_reg->ch_rdy);
+		dev_err(&ctrl->dev, "failed to wait for SWINF_IDLE\n");
+		goto out;
+	}
+
+	/* Send the command. */
+	cmd = (opc << 30) | (sid << 24) | ((len - 1) << 16) | addr;
+	pmif_writel(arb, cmd, inf_reg->ch_send);
+
+	/*
+	 * Wait for Software Interface FSM state to be WFVLDCLR,
+	 * read the data and clear the valid flag.
+	 */
+	ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta],
+					data, GET_SWINF(data) == SWINF_WFVLDCLR,
+					PMIF_DELAY_US, PMIF_TIMEOUT_US);
+	if (ret < 0) {
+		dev_err(&ctrl->dev, "failed to wait for SWINF_WFVLDCLR\n");
+		goto out;
+	}
+
+	data = pmif_readl(arb, inf_reg->rdata);
+	memcpy(buf, &data, len);
+	pmif_writel(arb, 1, inf_reg->ch_rdy);
+
+out:
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int pmif_spmi_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
+			       u16 addr, const u8 *buf, size_t len)
+{
+	struct pmif *arb = spmi_controller_get_drvdata(ctrl);
+	struct ch_reg *inf_reg;
+	int ret;
+	u32 data, cmd;
+
+	if (len > 4) {
+		dev_err(&ctrl->dev, "pmif supports 1..4 bytes per trans, but:%zu requested", len);
+		return -EINVAL;
+	}
+
+	/* Check the opcode */
+	if (opc >= 0x40 && opc <= 0x5F)
+		opc = PMIF_CMD_REG;
+	else if ((opc <= 0xF) || (opc >= 0x30 && opc <= 0x37))
+		opc = PMIF_CMD_EXT_REG_LONG;
+	else if (opc >= 0x80)
+		opc = PMIF_CMD_REG_0;
+	else
+		return -EINVAL;
+
+	/* Wait for Software Interface FSM state to be IDLE. */
+	inf_reg = &arb->chan;
+	ret = readl_poll_timeout_atomic(arb->base + arb->data->regs[inf_reg->ch_sta],
+					data, GET_SWINF(data) == SWINF_IDLE,
+					PMIF_DELAY_US, PMIF_TIMEOUT_US);
+	if (ret < 0) {
+		/* set channel ready if the data has transferred */
+		if (pmif_is_fsm_vldclr(arb))
+			pmif_writel(arb, 1, inf_reg->ch_rdy);
+		dev_err(&ctrl->dev, "failed to wait for SWINF_IDLE\n");
+		goto out;
+	}
+
+	/* Set the write data. */
+	memcpy(&data, buf, len);
+	pmif_writel(arb, data, inf_reg->wdata);
+
+	/* Send the command. */
+	cmd = (opc << 30) | BIT(29) | (sid << 24) | ((len - 1) << 16) | addr;
+	pmif_writel(arb, cmd, inf_reg->ch_send);
+
+out:
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static const struct pmif_data mt6873_pmif_arb = {
+	.regs = mt6873_regs,
+	.spmimst_regs = mt6873_spmi_regs,
+	.soc_chan = 2,
+};
+
+static int mtk_spmi_probe(struct platform_device *pdev)
+{
+	struct pmif *arb;
+	struct spmi_controller *ctrl;
+	int err, i;
+	u32 chan_offset;
+
+	ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*arb));
+	if (!ctrl)
+		return -ENOMEM;
+
+	arb = spmi_controller_get_drvdata(ctrl);
+	arb->data = of_device_get_match_data(&pdev->dev);
+	if (!arb->data) {
+		err = -EINVAL;
+		dev_err(&pdev->dev, "Cannot get drv_data\n");
+		goto err_put_ctrl;
+	}
+
+	arb->base = devm_platform_ioremap_resource_byname(pdev, "pmif");
+	if (IS_ERR(arb->base)) {
+		err = PTR_ERR(arb->base);
+		dev_err(&pdev->dev, "pmif failed to get the remappped memory\n");
+		goto err_put_ctrl;
+	}
+
+	arb->spmimst_base = devm_platform_ioremap_resource_byname(pdev, "spmimst");
+	if (IS_ERR(arb->spmimst_base)) {
+		err = PTR_ERR(arb->spmimst_base);
+		dev_err(&pdev->dev, "spmimst failed to get the remappped memory\n");
+		goto err_put_ctrl;
+	}
+
+	arb->nclks = ARRAY_SIZE(pmif_clock_names);
+	if (arb->nclks > PMIF_MAX_CLKS) {
+		err = -EINVAL;
+		dev_err(&pdev->dev, "exceed the max clock numbers\n");
+		goto err_put_ctrl;
+	}
+
+	for (i = 0; i < arb->nclks; i++)
+		arb->clks[i].id = pmif_clock_names[i];
+
+	err = devm_clk_bulk_get(&pdev->dev, arb->nclks, arb->clks);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to get clocks: %d\n", err);
+		goto err_put_ctrl;
+	}
+
+	err = clk_bulk_prepare_enable(arb->nclks, arb->clks);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to enable clocks: %d\n", err);
+		goto err_put_ctrl;
+	}
+
+	ctrl->cmd = pmif_arb_cmd;
+	ctrl->read_cmd = pmif_spmi_read_cmd;
+	ctrl->write_cmd = pmif_spmi_write_cmd;
+
+	chan_offset = PMIF_CHAN_OFFSET * arb->data->soc_chan;
+	arb->chan.ch_sta = PMIF_SWINF_0_STA + chan_offset;
+	arb->chan.wdata = PMIF_SWINF_0_WDATA_31_0 + chan_offset;
+	arb->chan.rdata = PMIF_SWINF_0_RDATA_31_0 + chan_offset;
+	arb->chan.ch_send = PMIF_SWINF_0_ACC + chan_offset;
+	arb->chan.ch_rdy = PMIF_SWINF_0_VLD_CLR + chan_offset;
+
+	platform_set_drvdata(pdev, ctrl);
+
+	err = spmi_controller_add(ctrl);
+	if (err)
+		goto err_domain_remove;
+
+	return 0;
+
+err_domain_remove:
+	clk_bulk_disable_unprepare(arb->nclks, arb->clks);
+err_put_ctrl:
+	spmi_controller_put(ctrl);
+	return err;
+}
+
+static int mtk_spmi_remove(struct platform_device *pdev)
+{
+	struct spmi_controller *ctrl = platform_get_drvdata(pdev);
+	struct pmif *arb = spmi_controller_get_drvdata(ctrl);
+
+	clk_bulk_disable_unprepare(arb->nclks, arb->clks);
+	spmi_controller_remove(ctrl);
+	spmi_controller_put(ctrl);
+	return 0;
+}
+
+static const struct of_device_id mtk_spmi_match_table[] = {
+	{
+		.compatible = "mediatek,mt6873-spmi",
+		.data = &mt6873_pmif_arb,
+	}, {
+		/* sentinel */
+	},
+};
+MODULE_DEVICE_TABLE(of, mtk_spmi_match_table);
+
+static struct platform_driver mtk_spmi_driver = {
+	.driver		= {
+		.name	= "spmi-mtk",
+		.of_match_table = of_match_ptr(mtk_spmi_match_table),
+	},
+	.probe		= mtk_spmi_probe,
+	.remove		= mtk_spmi_remove,
+};
+module_platform_driver(mtk_spmi_driver);
+
+MODULE_AUTHOR("Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>");
+MODULE_DESCRIPTION("MediaTek SPMI Driver");
+MODULE_LICENSE("GPL");
-- 
2.18.0


  parent reply	other threads:[~2021-07-04  3:07 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-04  3:06 [PATCH v9 0/5] Add SPMI support for Mediatek SoC IC Hsin-Hsiung Wang
2021-07-04  3:06 ` [PATCH v9 1/5] dt-bindings: spmi: modify the constraint 'maxItems' to 'minItems' Hsin-Hsiung Wang
2021-07-04  3:06 ` [PATCH v9 2/5] dt-bindings: spmi: document binding for the Mediatek SPMI controller Hsin-Hsiung Wang
2021-07-12 15:05   ` Rob Herring
2021-07-04  3:06 ` Hsin-Hsiung Wang [this message]
2021-07-04  3:06 ` [PATCH v9 4/5] spmi: mediatek: Add support for MT8195 Hsin-Hsiung Wang
2021-07-04  3:06 ` [PATCH v9 5/5] arm64: dts: mt8192: add spmi node Hsin-Hsiung Wang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1625368018-17505-4-git-send-email-hsin-hsiung.wang@mediatek.com \
    --to=hsin-hsiung.wang@mediatek.com \
    --cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=srv_heupstream@mediatek.com \
    --subject='Re: [PATCH v9 3/5] spmi: mediatek: Add support for MT6873/8192' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).