linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rajendra Nayak <rnayak@codeaurora.org>
To: ulf.hansson@linaro.org, bjorn.andersson@linaro.org,
	viresh.kumar@linaro.org
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	swboyd@chromium.org, rojay@codeaurora.org, stephan@gerhold.net,
	Rajendra Nayak <rnayak@codeaurora.org>
Subject: [PATCH v4 1/2] PM / Domains: Add support for 'required-opps' to set default perf state
Date: Fri, 16 Jul 2021 15:30:57 +0530	[thread overview]
Message-ID: <1626429658-18961-2-git-send-email-rnayak@codeaurora.org> (raw)
In-Reply-To: <1626429658-18961-1-git-send-email-rnayak@codeaurora.org>

Some devics within power domains with performance states do not
support DVFS, but still need to vote on a default/static state
while they are active. They can express this using the 'required-opps'
property in device tree, which points to the phandle of the OPP
supported by the corresponding power-domains.

Add support to parse this information from DT and then set the
specified performance state during attach and drop it on detach.
Also drop/set as part of runtime suspend/resume callbacks.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
 drivers/base/power/domain.c | 37 ++++++++++++++++++++++++++++++++++---
 include/linux/pm_domain.h   |  1 +
 2 files changed, 35 insertions(+), 3 deletions(-)

diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c
index a934c67..dcc0b71 100644
--- a/drivers/base/power/domain.c
+++ b/drivers/base/power/domain.c
@@ -917,6 +917,10 @@ static int genpd_runtime_suspend(struct device *dev)
 	if (irq_safe_dev_in_no_sleep_domain(dev, genpd))
 		return 0;
 
+	/* Drop the default performance state */
+	if (dev_gpd_data(dev)->default_pstate)
+		dev_pm_genpd_set_performance_state(dev, 0);
+
 	genpd_lock(genpd);
 	gpd_data->rpm_pstate = genpd_drop_performance_state(dev);
 	genpd_power_off(genpd, true, 0);
@@ -937,6 +941,7 @@ static int genpd_runtime_resume(struct device *dev)
 {
 	struct generic_pm_domain *genpd;
 	struct generic_pm_domain_data *gpd_data = dev_gpd_data(dev);
+	unsigned int default_pstate = gpd_data->default_pstate;
 	struct gpd_timing_data *td = &gpd_data->td;
 	bool runtime_pm = pm_runtime_enabled(dev);
 	ktime_t time_start;
@@ -968,6 +973,9 @@ static int genpd_runtime_resume(struct device *dev)
 	if (ret)
 		return ret;
 
+	/* Set the default performance state */
+	if (default_pstate)
+		dev_pm_genpd_set_performance_state(dev, default_pstate);
  out:
 	/* Measure resume latency. */
 	time_start = 0;
@@ -1000,6 +1008,8 @@ static int genpd_runtime_resume(struct device *dev)
 	genpd_stop_dev(genpd, dev);
 err_poweroff:
 	if (!pm_runtime_is_irq_safe(dev) || genpd_is_irq_safe(genpd)) {
+		if (default_pstate)
+			dev_pm_genpd_set_performance_state(dev, 0);
 		genpd_lock(genpd);
 		gpd_data->rpm_pstate = genpd_drop_performance_state(dev);
 		genpd_power_off(genpd, true, 0);
@@ -2598,6 +2608,12 @@ static void genpd_dev_pm_detach(struct device *dev, bool power_off)
 
 	dev_dbg(dev, "removing from PM domain %s\n", pd->name);
 
+	/* Drop the default performance state */
+	if (dev_gpd_data(dev)->default_pstate) {
+		dev_pm_genpd_set_performance_state(dev, 0);
+		dev_gpd_data(dev)->default_pstate = 0;
+	}
+
 	for (i = 1; i < GENPD_RETRY_MAX_MS; i <<= 1) {
 		ret = genpd_remove_device(pd, dev);
 		if (ret != -EAGAIN)
@@ -2635,9 +2651,10 @@ static void genpd_dev_pm_sync(struct device *dev)
 static int __genpd_dev_pm_attach(struct device *dev, struct device *base_dev,
 				 unsigned int index, bool power_on)
 {
+	struct device_node *np;
 	struct of_phandle_args pd_args;
 	struct generic_pm_domain *pd;
-	int ret;
+	int ret, pstate;
 
 	ret = of_parse_phandle_with_args(dev->of_node, "power-domains",
 				"#power-domain-cells", index, &pd_args);
@@ -2675,10 +2692,24 @@ static int __genpd_dev_pm_attach(struct device *dev, struct device *base_dev,
 		genpd_unlock(pd);
 	}
 
-	if (ret)
+	if (ret) {
 		genpd_remove_device(pd, dev);
+		return -EPROBE_DEFER;
+	}
+
+	/* Set the default performance state */
+	np = base_dev->of_node;
+	if (of_parse_phandle(np, "required-opps", index)) {
+		pstate = of_get_required_opp_performance_state(np, index);
+		if (pstate < 0) {
+			dev_err(dev, "failed to set pstate:%d", pstate);
+			ret = pstate;
+		}
+		dev_pm_genpd_set_performance_state(dev, pstate);
+		dev_gpd_data(dev)->default_pstate = pstate;
+	}
 
-	return ret ? -EPROBE_DEFER : 1;
+	return ret ? ret : 1;
 }
 
 /**
diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h
index 21a0577..67017c9 100644
--- a/include/linux/pm_domain.h
+++ b/include/linux/pm_domain.h
@@ -198,6 +198,7 @@ struct generic_pm_domain_data {
 	struct notifier_block *power_nb;
 	int cpu;
 	unsigned int performance_state;
+	unsigned int default_pstate;
 	unsigned int rpm_pstate;
 	ktime_t	next_wakeup;
 	void *data;
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation


  reply	other threads:[~2021-07-16 10:02 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-16 10:00 [PATCH v4 0/2] PM / Domains: Add support for 'required-opps' to set default perf state Rajendra Nayak
2021-07-16 10:00 ` Rajendra Nayak [this message]
2021-07-16 20:19   ` [PATCH v4 1/2] " Stephen Boyd
2021-07-19 11:50     ` Rajendra Nayak
2021-07-16 10:00 ` [PATCH v4 2/2] arm64: dts: sc7180: Add required-opps for i2c Rajendra Nayak
2021-07-16 19:39   ` Stephen Boyd
2021-07-16 20:18   ` Bjorn Andersson
2021-07-16 20:21     ` Stephen Boyd
2021-07-16 20:52       ` Bjorn Andersson
2021-07-16 21:49         ` Stephen Boyd
2021-07-16 21:59           ` Bjorn Andersson
2021-07-19  9:37             ` Rajendra Nayak
2021-07-19 19:19               ` Bjorn Andersson
2021-07-20  4:29                 ` Rajendra Nayak
2021-07-25 17:01                   ` Bjorn Andersson
2021-07-27  7:35                     ` Rajendra Nayak
2021-07-28  3:46                       ` Bjorn Andersson
2021-07-28 14:01                         ` Dmitry Baryshkov
2021-07-28 18:47                           ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1626429658-18961-2-git-send-email-rnayak@codeaurora.org \
    --to=rnayak@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=rojay@codeaurora.org \
    --cc=stephan@gerhold.net \
    --cc=swboyd@chromium.org \
    --cc=ulf.hansson@linaro.org \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).