linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 00/13] Use qmp_send to update co-processor load state
@ 2021-07-20  4:36 Sibi Sankar
  2021-07-20  4:36 ` [PATCH v4 01/13] dt-bindings: soc: qcom: aoss: Drop the load state power-domain Sibi Sankar
                   ` (12 more replies)
  0 siblings, 13 replies; 25+ messages in thread
From: Sibi Sankar @ 2021-07-20  4:36 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

The power domains exposed by the AOSS QMP driver control the load state
resources linked to modem, adsp, cdsp remoteprocs. These are used to
notify the Always on Subsystem (AOSS) that a particular co-processor is
up/down. AOSS uses this information to wait for the co-processors to
suspend before starting its sleep sequence. These co-processors enter
low-power modes independent to that of the application processor and
the load state resources linked to them are expected to remain unaltered
across system suspend/resume cycles. To achieve this behavior let's stop
modeling them as power-domains and replace them with generic qmp_send
interface instead.

https://lore.kernel.org/lkml/20200913034603.GV3715@yoga/
Previous discussion on dropping power-domain support from AOSS QMP driver

Depends on:
aoss yaml: https://patchwork.kernel.org/project/linux-arm-msm/cover/20210709174142.1274554-1-bjorn.andersson@linaro.org/
qmp_send: https://patchwork.kernel.org/project/linux-arm-msm/cover/1623237532-20829-1-git-send-email-sibis@codeaurora.org/

V4:
 * Rebase patch 1 due to the aoss-qmp yaml conversion (Dropping Rb).
 * Commit message change and sc8180x co-processor addition
   to patch 2. [Rob/Bjorn]
 * Drop unused pdev and kfree the load state string in q6v5_deinit
   /probe path for patch 4. [Matthias]
 * Replaced "binding" with "property" across the series. [Matthias]
 * Commit message change and drop incorrect cleanup on cooling
   device probe failures. [Matthias]

V3:
 * Misc. documentation fixes [patch 2]:
  - Reduce power-domain maxItems due to load_state pd removal
  - Combine compatibles where possible with the load_state pd removal
  - Fixup the qcom,qmp ref to phandle type

V2:
 * load_state is currently broken on mainline so be safely dropped
   without side-effects.
 * Rebased on top of qmp_send v3 series.
 * Dropped R-b from Stephen and Rob on patch 3 due to the yaml
   conversion.
 * New patch [12] to drop unused aoss-qmp header.
 * Commit message update [patch 1] [Rob]
 * Reorder the series [Stephen]

Sibi Sankar (13):
  dt-bindings: soc: qcom: aoss: Drop the load state power-domain
  dt-bindings: remoteproc: qcom: pas: Add QMP property
  dt-bindings: remoteproc: qcom: Add QMP property
  remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state
  arm64: dts: qcom: sc7180: Use QMP property to control load state
  arm64: dts: qcom: sc7280: Use QMP property to control load state
  arm64: dts: qcom: sdm845: Use QMP property to control load state
  arm64: dts: qcom: sm8150: Use QMP property to control load state
  arm64: dts: qcom: sm8250: Use QMP property to control load state
  arm64: dts: qcom: sm8350: Use QMP property to control load state
  soc: qcom: aoss: Drop power domain support
  dt-bindings: msm/dp: Remove aoss-qmp header
  dt-bindings: soc: qcom: aoss: Delete unused power-domain definitions

 .../bindings/display/msm/dp-controller.yaml        |   1 -
 .../devicetree/bindings/remoteproc/qcom,adsp.yaml  |  65 +++++++------
 .../devicetree/bindings/remoteproc/qcom,q6v5.txt   |   7 +-
 .../bindings/soc/qcom/qcom,aoss-qmp.yaml           |  11 +--
 arch/arm64/boot/dts/qcom/sc7180.dtsi               |   9 +-
 arch/arm64/boot/dts/qcom/sc7280.dtsi               |   2 -
 arch/arm64/boot/dts/qcom/sdm845.dtsi               |   8 +-
 arch/arm64/boot/dts/qcom/sm8150.dtsi               |  28 +++---
 arch/arm64/boot/dts/qcom/sm8250.dtsi               |  22 ++---
 arch/arm64/boot/dts/qcom/sm8350.dtsi               |  30 +++---
 drivers/remoteproc/qcom_q6v5.c                     |  57 ++++++++++-
 drivers/remoteproc/qcom_q6v5.h                     |   7 +-
 drivers/remoteproc/qcom_q6v5_adsp.c                |   7 +-
 drivers/remoteproc/qcom_q6v5_mss.c                 |  44 ++-------
 drivers/remoteproc/qcom_q6v5_pas.c                 |  85 ++++------------
 drivers/remoteproc/qcom_q6v5_wcss.c                |   4 +-
 drivers/soc/qcom/qcom_aoss.c                       | 107 ---------------------
 include/dt-bindings/power/qcom-aoss-qmp.h          |  14 ---
 18 files changed, 185 insertions(+), 323 deletions(-)
 delete mode 100644 include/dt-bindings/power/qcom-aoss-qmp.h

-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v4 01/13] dt-bindings: soc: qcom: aoss: Drop the load state power-domain
  2021-07-20  4:36 [PATCH v4 00/13] Use qmp_send to update co-processor load state Sibi Sankar
@ 2021-07-20  4:36 ` Sibi Sankar
  2021-07-20 21:10   ` Matthias Kaehlcke
                     ` (2 more replies)
  2021-07-20  4:36 ` [PATCH v4 02/13] dt-bindings: remoteproc: qcom: pas: Add QMP property Sibi Sankar
                   ` (11 subsequent siblings)
  12 siblings, 3 replies; 25+ messages in thread
From: Sibi Sankar @ 2021-07-20  4:36 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

The power-domains exposed by AOSS QMP node are used to notify the Always
on Subsystem (AOSS) that a particular co-processor is up/down. These
co-processors enter low-power modes independent to that of the application
processor and their states are expected to remain unaltered across system
suspend/resume cycles. To achieve this behavior let's drop the load
power-domain and replace them with generic qmp_send interface instead.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---

v4:
 * Rebase patch due to the recent aoss-qmp yaml conversion (Dropping Rb).

 Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml | 11 +----------
 1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
index 93e4b737ee1b..c55e98fc14fa 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml
@@ -19,8 +19,7 @@ description:
 
   The AOSS side channel exposes control over a set of resources, used to control
   a set of debug related clocks and to affect the low power state of resources
-  related to the secondary subsystems. These resources are exposed as a set of
-  power-domains.
+  related to the secondary subsystems.
 
 properties:
   compatible:
@@ -57,13 +56,6 @@ properties:
     description:
       The single clock represents the QDSS clock.
 
-  "#power-domain-cells":
-    const: 1
-    description: |
-        The provided power-domains are:
-        CDSP state (0), LPASS state (1), modem state (2), SLPI
-        state (3), SPSS state (4) and Venus state (5).
-
 required:
   - compatible
   - reg
@@ -101,7 +93,6 @@ examples:
       mboxes = <&apss_shared 0>;
 
       #clock-cells = <0>;
-      #power-domain-cells = <1>;
 
       cx_cdev: cx {
         #cooling-cells = <2>;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v4 02/13] dt-bindings: remoteproc: qcom: pas: Add QMP property
  2021-07-20  4:36 [PATCH v4 00/13] Use qmp_send to update co-processor load state Sibi Sankar
  2021-07-20  4:36 ` [PATCH v4 01/13] dt-bindings: soc: qcom: aoss: Drop the load state power-domain Sibi Sankar
@ 2021-07-20  4:36 ` Sibi Sankar
  2021-07-20 23:10   ` Matthias Kaehlcke
  2021-07-20  4:36 ` [PATCH v4 03/13] dt-bindings: remoteproc: qcom: " Sibi Sankar
                   ` (10 subsequent siblings)
  12 siblings, 1 reply; 25+ messages in thread
From: Sibi Sankar @ 2021-07-20  4:36 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

The load state power-domain, used by the co-processors to notify the
Always on Subsystem (AOSS) that a particular co-processor is up/down,
suffers from the side-effect of changing states during suspend/resume.
However the co-processors enter low-power modes independent to that of
the application processor and their states are expected to remain
unaltered across system suspend/resume cycles. To achieve this behavior
let's drop the load state power-domain and replace them with the qmp
property for all SoCs supporting low power mode signalling.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---

v4:
 * Commit message change and sc8180x co-processor addition. [Rob/Bjorn]

 .../devicetree/bindings/remoteproc/qcom,adsp.yaml  | 65 +++++++++++-----------
 1 file changed, 33 insertions(+), 32 deletions(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index c597ccced623..1182afb5f593 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -78,11 +78,11 @@ properties:
 
   power-domains:
     minItems: 1
-    maxItems: 3
+    maxItems: 2
 
   power-domain-names:
     minItems: 1
-    maxItems: 3
+    maxItems: 2
 
   firmware-name:
     $ref: /schemas/types.yaml#/definitions/string
@@ -92,6 +92,10 @@ properties:
     maxItems: 1
     description: Reference to the reserved-memory for the Hexagon core
 
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
   qcom,smem-states:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description: States used by the AP to signal the Hexagon core
@@ -368,13 +372,11 @@ allOf:
       properties:
         power-domains:
           items:
-            - description: Load State power domain
             - description: CX power domain
             - description: MX power domain
             - description: MSS power domain
         power-domain-names:
           items:
-            - const: load_state
             - const: cx
             - const: mx
             - const: mss
@@ -390,43 +392,20 @@ allOf:
       properties:
         power-domains:
           items:
-            - description: Load State power domain
             - description: CX power domain
-        power-domain-names:
-          items:
-            - const: load_state
-            - const: cx
 
   - if:
       properties:
         compatible:
           contains:
             enum:
+              - qcom,sdx55-mpss-pas
               - qcom,sm8150-mpss-pas
               - qcom,sm8350-mpss-pas
     then:
       properties:
         power-domains:
           items:
-            - description: Load State power domain
-            - description: CX power domain
-            - description: MSS power domain
-        power-domain-names:
-          items:
-            - const: load_state
-            - const: cx
-            - const: mss
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sdx55-mpss-pas
-    then:
-      properties:
-        power-domains:
-          items:
             - description: CX power domain
             - description: MSS power domain
         power-domain-names:
@@ -450,12 +429,10 @@ allOf:
       properties:
         power-domains:
           items:
-            - description: Load State power domain
             - description: LCX power domain
             - description: LMX power domain
         power-domain-names:
           items:
-            - const: load_state
             - const: lcx
             - const: lmx
 
@@ -469,12 +446,10 @@ allOf:
       properties:
         power-domains:
           items:
-            - description: Load State power domain
             - description: CX power domain
             - description: MXC power domain
         power-domain-names:
           items:
-            - const: load_state
             - const: cx
             - const: mxc
 
@@ -510,6 +485,32 @@ allOf:
             - const: mss_restart
             - const: pdc_reset
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7180-mpss-pas
+              - qcom,sc8180x-adsp-pas
+              - qcom,sc8180x-cdsp-pas
+              - qcom,sc8180x-mpss-pas
+              - qcom,sm8150-adsp-pas
+              - qcom,sm8150-cdsp-pas
+              - qcom,sm8150-mpss-pas
+              - qcom,sm8150-slpi-pas
+              - qcom,sm8250-adsp-pas
+              - qcom,sm8250-cdsp-pas
+              - qcom,sm8250-slpi-pas
+              - qcom,sm8350-adsp-pas
+              - qcom,sm8350-cdsp-pas
+              - qcom,sm8350-mpss-pas
+              - qcom,sm8350-slpi-pas
+    then:
+      properties:
+        qcom,qmp:
+          items:
+            - description: Reference to the AOSS side-channel message RAM.
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,rpmcc.h>
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v4 03/13] dt-bindings: remoteproc: qcom: Add QMP property
  2021-07-20  4:36 [PATCH v4 00/13] Use qmp_send to update co-processor load state Sibi Sankar
  2021-07-20  4:36 ` [PATCH v4 01/13] dt-bindings: soc: qcom: aoss: Drop the load state power-domain Sibi Sankar
  2021-07-20  4:36 ` [PATCH v4 02/13] dt-bindings: remoteproc: qcom: pas: Add QMP property Sibi Sankar
@ 2021-07-20  4:36 ` Sibi Sankar
  2021-07-20  4:36 ` [PATCH v4 04/13] remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state Sibi Sankar
                   ` (9 subsequent siblings)
  12 siblings, 0 replies; 25+ messages in thread
From: Sibi Sankar @ 2021-07-20  4:36 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

Add Qualcomm Mailbox Protocol (QMP) property to replace the power domain
exposed by the AOSS QMP node.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 69c49c7b2cff..494257010629 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -174,7 +174,12 @@ For the compatible string below the following supplies are required:
 		    must be "cx", "mx"
 	qcom,sc7180-mss-pil:
 	qcom,sdm845-mss-pil:
-		    must be "cx", "mx", "mss", "load_state"
+		    must be "cx", "mx", "mss"
+
+- qcom,qmp:
+	Usage: optional
+	Value type: <phandle>
+	Definition: reference to the AOSS side-channel message RAM.
 
 - qcom,smem-states:
 	Usage: required
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v4 04/13] remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state
  2021-07-20  4:36 [PATCH v4 00/13] Use qmp_send to update co-processor load state Sibi Sankar
                   ` (2 preceding siblings ...)
  2021-07-20  4:36 ` [PATCH v4 03/13] dt-bindings: remoteproc: qcom: " Sibi Sankar
@ 2021-07-20  4:36 ` Sibi Sankar
  2021-07-21  5:26   ` Stephen Boyd
  2021-07-30 16:36   ` Bjorn Andersson
  2021-07-20  4:36 ` [PATCH v4 05/13] arm64: dts: qcom: sc7180: Use QMP property to control " Sibi Sankar
                   ` (8 subsequent siblings)
  12 siblings, 2 replies; 25+ messages in thread
From: Sibi Sankar @ 2021-07-20  4:36 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

The power domains exposed by the AOSS QMP driver control the load state
resources linked to modem, adsp, cdsp remoteprocs. These are used to
notify the Always on Subsystem (AOSS) that a particular co-processor is
up/down. AOSS uses this information to wait for the co-processors to
suspend before starting its sleep sequence.

These co-processors enter low-power modes independent to that of the
application processor and the load state resources linked to them are
expected to remain unaltered across system suspend/resume cycles. To
achieve this behavior lets stop using the power-domains exposed by the
AOSS QMP node and replace them with generic qmp_send interface instead.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---

v4:
 * Drop unused pdev and kfree the load state string in q6v5_deinit
   /probe path for patch 4. [Matthias]

 drivers/remoteproc/qcom_q6v5.c      | 57 ++++++++++++++++++++++++-
 drivers/remoteproc/qcom_q6v5.h      |  7 ++-
 drivers/remoteproc/qcom_q6v5_adsp.c |  7 ++-
 drivers/remoteproc/qcom_q6v5_mss.c  | 44 ++++---------------
 drivers/remoteproc/qcom_q6v5_pas.c  | 85 +++++++++----------------------------
 drivers/remoteproc/qcom_q6v5_wcss.c |  4 +-
 6 files changed, 96 insertions(+), 108 deletions(-)

diff --git a/drivers/remoteproc/qcom_q6v5.c b/drivers/remoteproc/qcom_q6v5.c
index 7e9244c748da..997ff21271f7 100644
--- a/drivers/remoteproc/qcom_q6v5.c
+++ b/drivers/remoteproc/qcom_q6v5.c
@@ -16,8 +16,28 @@
 #include "qcom_common.h"
 #include "qcom_q6v5.h"
 
+#define Q6V5_LOAD_STATE_MSG_LEN	64
 #define Q6V5_PANIC_DELAY_MS	200
 
+static int q6v5_load_state_toggle(struct qcom_q6v5 *q6v5, bool enable)
+{
+	char buf[Q6V5_LOAD_STATE_MSG_LEN] = {};
+	int ret;
+
+	if (IS_ERR(q6v5->qmp))
+		return 0;
+
+	snprintf(buf, sizeof(buf),
+		 "{class: image, res: load_state, name: %s, val: %s}",
+		 q6v5->load_state, enable ? "on" : "off");
+
+	ret = qmp_send(q6v5->qmp, buf, sizeof(buf));
+	if (ret)
+		dev_err(q6v5->dev, "failed to toggle load state\n");
+
+	return ret;
+}
+
 /**
  * qcom_q6v5_prepare() - reinitialize the qcom_q6v5 context before start
  * @q6v5:	reference to qcom_q6v5 context to be reinitialized
@@ -26,6 +46,12 @@
  */
 int qcom_q6v5_prepare(struct qcom_q6v5 *q6v5)
 {
+	int ret;
+
+	ret = q6v5_load_state_toggle(q6v5, true);
+	if (ret)
+		return ret;
+
 	reinit_completion(&q6v5->start_done);
 	reinit_completion(&q6v5->stop_done);
 
@@ -47,6 +73,7 @@ EXPORT_SYMBOL_GPL(qcom_q6v5_prepare);
 int qcom_q6v5_unprepare(struct qcom_q6v5 *q6v5)
 {
 	disable_irq(q6v5->handover_irq);
+	q6v5_load_state_toggle(q6v5, false);
 
 	return !q6v5->handover_issued;
 }
@@ -196,12 +223,13 @@ EXPORT_SYMBOL_GPL(qcom_q6v5_panic);
  * @pdev:	platform_device reference for acquiring resources
  * @rproc:	associated remoteproc instance
  * @crash_reason: SMEM id for crash reason string, or 0 if none
+ * @load_state: load state resource string
  * @handover:	function to be called when proxy resources should be released
  *
  * Return: 0 on success, negative errno on failure
  */
 int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
-		   struct rproc *rproc, int crash_reason,
+		   struct rproc *rproc, int crash_reason, const char *load_state,
 		   void (*handover)(struct qcom_q6v5 *q6v5))
 {
 	int ret;
@@ -286,9 +314,36 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
 		return PTR_ERR(q6v5->state);
 	}
 
+	q6v5->load_state = kstrdup_const(load_state, GFP_KERNEL);
+	q6v5->qmp = qmp_get(&pdev->dev);
+	if (IS_ERR(q6v5->qmp)) {
+		if (PTR_ERR(q6v5->qmp) != -ENODEV) {
+			if (PTR_ERR(q6v5->qmp) != -EPROBE_DEFER)
+				dev_err(&pdev->dev, "failed to acquire load state\n");
+			kfree_const(q6v5->load_state);
+			return PTR_ERR(q6v5->qmp);
+		}
+	} else {
+		if (!q6v5->load_state) {
+			dev_err(&pdev->dev, "load state resource string empty\n");
+			return -EINVAL;
+		}
+	}
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(qcom_q6v5_init);
 
+/**
+ * qcom_q6v5_deinit() - deinitialize the q6v5 common struct
+ * @q6v5:	reference to qcom_q6v5 context to be deinitialized
+ */
+void qcom_q6v5_deinit(struct qcom_q6v5 *q6v5)
+{
+	kfree_const(q6v5->load_state);
+	qmp_put(q6v5->qmp);
+}
+EXPORT_SYMBOL_GPL(qcom_q6v5_deinit);
+
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("Qualcomm Peripheral Image Loader for Q6V5");
diff --git a/drivers/remoteproc/qcom_q6v5.h b/drivers/remoteproc/qcom_q6v5.h
index 1c212f670cbc..f35e04471ed7 100644
--- a/drivers/remoteproc/qcom_q6v5.h
+++ b/drivers/remoteproc/qcom_q6v5.h
@@ -5,6 +5,7 @@
 
 #include <linux/kernel.h>
 #include <linux/completion.h>
+#include <linux/soc/qcom/qcom_aoss.h>
 
 struct rproc;
 struct qcom_smem_state;
@@ -15,6 +16,8 @@ struct qcom_q6v5 {
 	struct rproc *rproc;
 
 	struct qcom_smem_state *state;
+	struct qmp *qmp;
+
 	unsigned stop_bit;
 
 	int wdog_irq;
@@ -32,12 +35,14 @@ struct qcom_q6v5 {
 
 	bool running;
 
+	const char *load_state;
 	void (*handover)(struct qcom_q6v5 *q6v5);
 };
 
 int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
-		   struct rproc *rproc, int crash_reason,
+		   struct rproc *rproc, int crash_reason, const char *load_state,
 		   void (*handover)(struct qcom_q6v5 *q6v5));
+void qcom_q6v5_deinit(struct qcom_q6v5 *q6v5);
 
 int qcom_q6v5_prepare(struct qcom_q6v5 *q6v5);
 int qcom_q6v5_unprepare(struct qcom_q6v5 *q6v5);
diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
index 8b0d8bbacd2e..098362e6e233 100644
--- a/drivers/remoteproc/qcom_q6v5_adsp.c
+++ b/drivers/remoteproc/qcom_q6v5_adsp.c
@@ -185,7 +185,9 @@ static int adsp_start(struct rproc *rproc)
 	int ret;
 	unsigned int val;
 
-	qcom_q6v5_prepare(&adsp->q6v5);
+	ret = qcom_q6v5_prepare(&adsp->q6v5);
+	if (ret)
+		return ret;
 
 	ret = clk_prepare_enable(adsp->xo);
 	if (ret)
@@ -465,7 +467,7 @@ static int adsp_probe(struct platform_device *pdev)
 	if (ret)
 		goto disable_pm;
 
-	ret = qcom_q6v5_init(&adsp->q6v5, pdev, rproc, desc->crash_reason_smem,
+	ret = qcom_q6v5_init(&adsp->q6v5, pdev, rproc, desc->crash_reason_smem, NULL,
 			     qcom_adsp_pil_handover);
 	if (ret)
 		goto disable_pm;
@@ -500,6 +502,7 @@ static int adsp_remove(struct platform_device *pdev)
 
 	rproc_del(adsp->rproc);
 
+	qcom_q6v5_deinit(&adsp->q6v5);
 	qcom_remove_glink_subdev(adsp->rproc, &adsp->glink_subdev);
 	qcom_remove_sysmon_subdev(adsp->sysmon);
 	qcom_remove_ssr_subdev(adsp->rproc, &adsp->ssr_subdev);
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index 423b31dfa574..7a1422bd7925 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -137,7 +137,6 @@ struct rproc_hexagon_res {
 	char **proxy_clk_names;
 	char **reset_clk_names;
 	char **active_clk_names;
-	char **active_pd_names;
 	char **proxy_pd_names;
 	int version;
 	bool need_mem_protection;
@@ -169,12 +168,10 @@ struct q6v5 {
 	struct clk *active_clks[8];
 	struct clk *reset_clks[4];
 	struct clk *proxy_clks[4];
-	struct device *active_pds[1];
 	struct device *proxy_pds[3];
 	int active_clk_count;
 	int reset_clk_count;
 	int proxy_clk_count;
-	int active_pd_count;
 	int proxy_pd_count;
 
 	struct reg_info active_regs[1];
@@ -895,18 +892,14 @@ static int q6v5_mba_load(struct q6v5 *qproc)
 	int xfermemop_ret;
 	bool mba_load_err = false;
 
-	qcom_q6v5_prepare(&qproc->q6v5);
-
-	ret = q6v5_pds_enable(qproc, qproc->active_pds, qproc->active_pd_count);
-	if (ret < 0) {
-		dev_err(qproc->dev, "failed to enable active power domains\n");
-		goto disable_irqs;
-	}
+	ret = qcom_q6v5_prepare(&qproc->q6v5);
+	if (ret)
+		return ret;
 
 	ret = q6v5_pds_enable(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
 	if (ret < 0) {
 		dev_err(qproc->dev, "failed to enable proxy power domains\n");
-		goto disable_active_pds;
+		goto disable_irqs;
 	}
 
 	ret = q6v5_regulator_enable(qproc, qproc->fallback_proxy_regs,
@@ -1039,8 +1032,6 @@ static int q6v5_mba_load(struct q6v5 *qproc)
 			       qproc->fallback_proxy_reg_count);
 disable_proxy_pds:
 	q6v5_pds_disable(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
-disable_active_pds:
-	q6v5_pds_disable(qproc, qproc->active_pds, qproc->active_pd_count);
 disable_irqs:
 	qcom_q6v5_unprepare(&qproc->q6v5);
 
@@ -1076,7 +1067,6 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
 			 qproc->active_clk_count);
 	q6v5_regulator_disable(qproc, qproc->active_regs,
 			       qproc->active_reg_count);
-	q6v5_pds_disable(qproc, qproc->active_pds, qproc->active_pd_count);
 
 	/* In case of failure or coredump scenario where reclaiming MBA memory
 	 * could not happen reclaim it here.
@@ -1756,14 +1746,6 @@ static int q6v5_probe(struct platform_device *pdev)
 	}
 	qproc->active_reg_count = ret;
 
-	ret = q6v5_pds_attach(&pdev->dev, qproc->active_pds,
-			      desc->active_pd_names);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to attach active power domains\n");
-		goto free_rproc;
-	}
-	qproc->active_pd_count = ret;
-
 	ret = q6v5_pds_attach(&pdev->dev, qproc->proxy_pds,
 			      desc->proxy_pd_names);
 	/* Fallback to regulators for old device trees */
@@ -1773,12 +1755,12 @@ static int q6v5_probe(struct platform_device *pdev)
 					  desc->fallback_proxy_supply);
 		if (ret < 0) {
 			dev_err(&pdev->dev, "Failed to get fallback proxy regulators.\n");
-			goto detach_active_pds;
+			goto free_rproc;
 		}
 		qproc->fallback_proxy_reg_count = ret;
 	} else if (ret < 0) {
 		dev_err(&pdev->dev, "Failed to init power domains\n");
-		goto detach_active_pds;
+		goto free_rproc;
 	} else {
 		qproc->proxy_pd_count = ret;
 	}
@@ -1792,7 +1774,7 @@ static int q6v5_probe(struct platform_device *pdev)
 	qproc->need_mem_protection = desc->need_mem_protection;
 	qproc->has_mba_logs = desc->has_mba_logs;
 
-	ret = qcom_q6v5_init(&qproc->q6v5, pdev, rproc, MPSS_CRASH_REASON_SMEM,
+	ret = qcom_q6v5_init(&qproc->q6v5, pdev, rproc, MPSS_CRASH_REASON_SMEM, "modem",
 			     qcom_msa_handover);
 	if (ret)
 		goto detach_proxy_pds;
@@ -1822,8 +1804,6 @@ static int q6v5_probe(struct platform_device *pdev)
 	qcom_remove_glink_subdev(rproc, &qproc->glink_subdev);
 detach_proxy_pds:
 	q6v5_pds_detach(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
-detach_active_pds:
-	q6v5_pds_detach(qproc, qproc->active_pds, qproc->active_pd_count);
 free_rproc:
 	rproc_free(rproc);
 
@@ -1837,13 +1817,13 @@ static int q6v5_remove(struct platform_device *pdev)
 
 	rproc_del(rproc);
 
+	qcom_q6v5_deinit(&qproc->q6v5);
 	qcom_remove_sysmon_subdev(qproc->sysmon);
 	qcom_remove_ssr_subdev(rproc, &qproc->ssr_subdev);
 	qcom_remove_smd_subdev(rproc, &qproc->smd_subdev);
 	qcom_remove_glink_subdev(rproc, &qproc->glink_subdev);
 
 	q6v5_pds_detach(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
-	q6v5_pds_detach(qproc, qproc->active_pds, qproc->active_pd_count);
 
 	rproc_free(rproc);
 
@@ -1867,10 +1847,6 @@ static const struct rproc_hexagon_res sc7180_mss = {
 		"nav",
 		NULL
 	},
-	.active_pd_names = (char*[]){
-		"load_state",
-		NULL
-	},
 	.proxy_pd_names = (char*[]){
 		"cx",
 		"mx",
@@ -1903,10 +1879,6 @@ static const struct rproc_hexagon_res sdm845_mss = {
 			"mnoc_axi",
 			NULL
 	},
-	.active_pd_names = (char*[]){
-			"load_state",
-			NULL
-	},
 	.proxy_pd_names = (char*[]){
 			"cx",
 			"mx",
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index a79bee901e9b..333a072121fb 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -37,9 +37,9 @@ struct adsp_data {
 	bool has_aggre2_clk;
 	bool auto_boot;
 
-	char **active_pd_names;
 	char **proxy_pd_names;
 
+	const char *load_state;
 	const char *ssr_name;
 	const char *sysmon_name;
 	int ssctl_id;
@@ -57,10 +57,8 @@ struct qcom_adsp {
 	struct regulator *cx_supply;
 	struct regulator *px_supply;
 
-	struct device *active_pds[1];
 	struct device *proxy_pds[3];
 
-	int active_pd_count;
 	int proxy_pd_count;
 
 	int pas_id;
@@ -149,15 +147,13 @@ static int adsp_start(struct rproc *rproc)
 	struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
 	int ret;
 
-	qcom_q6v5_prepare(&adsp->q6v5);
-
-	ret = adsp_pds_enable(adsp, adsp->active_pds, adsp->active_pd_count);
-	if (ret < 0)
-		goto disable_irqs;
+	ret = qcom_q6v5_prepare(&adsp->q6v5);
+	if (ret)
+		return ret;
 
 	ret = adsp_pds_enable(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
 	if (ret < 0)
-		goto disable_active_pds;
+		goto disable_irqs;
 
 	ret = clk_prepare_enable(adsp->xo);
 	if (ret)
@@ -201,8 +197,6 @@ static int adsp_start(struct rproc *rproc)
 	clk_disable_unprepare(adsp->xo);
 disable_proxy_pds:
 	adsp_pds_disable(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
-disable_active_pds:
-	adsp_pds_disable(adsp, adsp->active_pds, adsp->active_pd_count);
 disable_irqs:
 	qcom_q6v5_unprepare(&adsp->q6v5);
 
@@ -234,7 +228,6 @@ static int adsp_stop(struct rproc *rproc)
 	if (ret)
 		dev_err(adsp->dev, "failed to shutdown: %d\n", ret);
 
-	adsp_pds_disable(adsp, adsp->active_pds, adsp->active_pd_count);
 	handover = qcom_q6v5_unprepare(&adsp->q6v5);
 	if (handover)
 		qcom_pas_handover(&adsp->q6v5);
@@ -456,19 +449,13 @@ static int adsp_probe(struct platform_device *pdev)
 	if (ret)
 		goto free_rproc;
 
-	ret = adsp_pds_attach(&pdev->dev, adsp->active_pds,
-			      desc->active_pd_names);
-	if (ret < 0)
-		goto free_rproc;
-	adsp->active_pd_count = ret;
-
 	ret = adsp_pds_attach(&pdev->dev, adsp->proxy_pds,
 			      desc->proxy_pd_names);
 	if (ret < 0)
-		goto detach_active_pds;
+		goto free_rproc;
 	adsp->proxy_pd_count = ret;
 
-	ret = qcom_q6v5_init(&adsp->q6v5, pdev, rproc, desc->crash_reason_smem,
+	ret = qcom_q6v5_init(&adsp->q6v5, pdev, rproc, desc->crash_reason_smem, desc->load_state,
 			     qcom_pas_handover);
 	if (ret)
 		goto detach_proxy_pds;
@@ -492,8 +479,6 @@ static int adsp_probe(struct platform_device *pdev)
 
 detach_proxy_pds:
 	adsp_pds_detach(adsp, adsp->proxy_pds, adsp->proxy_pd_count);
-detach_active_pds:
-	adsp_pds_detach(adsp, adsp->active_pds, adsp->active_pd_count);
 free_rproc:
 	rproc_free(rproc);
 
@@ -506,6 +491,7 @@ static int adsp_remove(struct platform_device *pdev)
 
 	rproc_del(adsp->rproc);
 
+	qcom_q6v5_deinit(&adsp->q6v5);
 	qcom_remove_glink_subdev(adsp->rproc, &adsp->glink_subdev);
 	qcom_remove_sysmon_subdev(adsp->sysmon);
 	qcom_remove_smd_subdev(adsp->rproc, &adsp->smd_subdev);
@@ -532,14 +518,11 @@ static const struct adsp_data sm8150_adsp_resource = {
 		.pas_id = 1,
 		.has_aggre2_clk = false,
 		.auto_boot = true,
-		.active_pd_names = (char*[]){
-			"load_state",
-			NULL
-		},
 		.proxy_pd_names = (char*[]){
 			"cx",
 			NULL
 		},
+		.load_state = "adsp",
 		.ssr_name = "lpass",
 		.sysmon_name = "adsp",
 		.ssctl_id = 0x14,
@@ -551,15 +534,12 @@ static const struct adsp_data sm8250_adsp_resource = {
 	.pas_id = 1,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
-	.active_pd_names = (char*[]){
-		"load_state",
-		NULL
-	},
 	.proxy_pd_names = (char*[]){
 		"lcx",
 		"lmx",
 		NULL
 	},
+	.load_state = "adsp",
 	.ssr_name = "lpass",
 	.sysmon_name = "adsp",
 	.ssctl_id = 0x14,
@@ -571,15 +551,12 @@ static const struct adsp_data sm8350_adsp_resource = {
 	.pas_id = 1,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
-	.active_pd_names = (char*[]){
-		"load_state",
-		NULL
-	},
 	.proxy_pd_names = (char*[]){
 		"lcx",
 		"lmx",
 		NULL
 	},
+	.load_state = "adsp",
 	.ssr_name = "lpass",
 	.sysmon_name = "adsp",
 	.ssctl_id = 0x14,
@@ -617,14 +594,11 @@ static const struct adsp_data sm8150_cdsp_resource = {
 	.pas_id = 18,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
-	.active_pd_names = (char*[]){
-		"load_state",
-		NULL
-	},
 	.proxy_pd_names = (char*[]){
 		"cx",
 		NULL
 	},
+	.load_state = "cdsp",
 	.ssr_name = "cdsp",
 	.sysmon_name = "cdsp",
 	.ssctl_id = 0x17,
@@ -636,14 +610,11 @@ static const struct adsp_data sm8250_cdsp_resource = {
 	.pas_id = 18,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
-	.active_pd_names = (char*[]){
-		"load_state",
-		NULL
-	},
 	.proxy_pd_names = (char*[]){
 		"cx",
 		NULL
 	},
+	.load_state = "cdsp",
 	.ssr_name = "cdsp",
 	.sysmon_name = "cdsp",
 	.ssctl_id = 0x17,
@@ -655,14 +626,11 @@ static const struct adsp_data sm8350_cdsp_resource = {
 	.pas_id = 18,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
-	.active_pd_names = (char*[]){
-		"load_state",
-		NULL
-	},
 	.proxy_pd_names = (char*[]){
 		"cx",
 		NULL
 	},
+	.load_state = "cdsp",
 	.ssr_name = "cdsp",
 	.sysmon_name = "cdsp",
 	.ssctl_id = 0x17,
@@ -675,15 +643,12 @@ static const struct adsp_data mpss_resource_init = {
 	.minidump_id = 3,
 	.has_aggre2_clk = false,
 	.auto_boot = false,
-	.active_pd_names = (char*[]){
-		"load_state",
-		NULL
-	},
 	.proxy_pd_names = (char*[]){
 		"cx",
 		"mss",
 		NULL
 	},
+	.load_state = "modem",
 	.ssr_name = "mpss",
 	.sysmon_name = "modem",
 	.ssctl_id = 0x12,
@@ -695,14 +660,11 @@ static const struct adsp_data sc8180x_mpss_resource = {
 	.pas_id = 4,
 	.has_aggre2_clk = false,
 	.auto_boot = false,
-	.active_pd_names = (char*[]){
-		"load_state",
-		NULL
-	},
 	.proxy_pd_names = (char*[]){
 		"cx",
 		NULL
 	},
+	.load_state = "modem",
 	.ssr_name = "mpss",
 	.sysmon_name = "modem",
 	.ssctl_id = 0x12,
@@ -725,15 +687,12 @@ static const struct adsp_data sm8150_slpi_resource = {
 		.pas_id = 12,
 		.has_aggre2_clk = false,
 		.auto_boot = true,
-		.active_pd_names = (char*[]){
-			"load_state",
-			NULL
-		},
 		.proxy_pd_names = (char*[]){
 			"lcx",
 			"lmx",
 			NULL
 		},
+		.load_state = "slpi",
 		.ssr_name = "dsps",
 		.sysmon_name = "slpi",
 		.ssctl_id = 0x16,
@@ -745,15 +704,12 @@ static const struct adsp_data sm8250_slpi_resource = {
 	.pas_id = 12,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
-	.active_pd_names = (char*[]){
-		"load_state",
-		NULL
-	},
 	.proxy_pd_names = (char*[]){
 		"lcx",
 		"lmx",
 		NULL
 	},
+	.load_state = "slpi",
 	.ssr_name = "dsps",
 	.sysmon_name = "slpi",
 	.ssctl_id = 0x16,
@@ -765,15 +721,12 @@ static const struct adsp_data sm8350_slpi_resource = {
 	.pas_id = 12,
 	.has_aggre2_clk = false,
 	.auto_boot = true,
-	.active_pd_names = (char*[]){
-		"load_state",
-		NULL
-	},
 	.proxy_pd_names = (char*[]){
 		"lcx",
 		"lmx",
 		NULL
 	},
+	.load_state = "slpi",
 	.ssr_name = "dsps",
 	.sysmon_name = "slpi",
 	.ssctl_id = 0x16,
diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c b/drivers/remoteproc/qcom_q6v5_wcss.c
index 20d50ec7eff1..0689288a2425 100644
--- a/drivers/remoteproc/qcom_q6v5_wcss.c
+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
@@ -1044,8 +1044,7 @@ static int q6v5_wcss_probe(struct platform_device *pdev)
 	if (ret)
 		goto free_rproc;
 
-	ret = qcom_q6v5_init(&wcss->q6v5, pdev, rproc, desc->crash_reason_smem,
-			     NULL);
+	ret = qcom_q6v5_init(&wcss->q6v5, pdev, rproc, desc->crash_reason_smem, NULL, NULL);
 	if (ret)
 		goto free_rproc;
 
@@ -1075,6 +1074,7 @@ static int q6v5_wcss_remove(struct platform_device *pdev)
 {
 	struct rproc *rproc = platform_get_drvdata(pdev);
 
+	qcom_q6v5_deinit(&qproc->q6v5);
 	rproc_del(rproc);
 	rproc_free(rproc);
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v4 05/13] arm64: dts: qcom: sc7180: Use QMP property to control load state
  2021-07-20  4:36 [PATCH v4 00/13] Use qmp_send to update co-processor load state Sibi Sankar
                   ` (3 preceding siblings ...)
  2021-07-20  4:36 ` [PATCH v4 04/13] remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state Sibi Sankar
@ 2021-07-20  4:36 ` Sibi Sankar
  2021-07-20  4:36 ` [PATCH v4 06/13] arm64: dts: qcom: sc7280: " Sibi Sankar
                   ` (7 subsequent siblings)
  12 siblings, 0 replies; 25+ messages in thread
From: Sibi Sankar @ 2021-07-20  4:36 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

Use the Qualcomm Mailbox Protocol (QMP) property to control the load
state resources on SC7180 SoCs and drop deprecated power-domains exposed
by AOSS QMP node.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index a5d58eb92896..d3e5b67afcb4 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -15,7 +15,6 @@
 #include <dt-bindings/interconnect/qcom,sc7180.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
-#include <dt-bindings/power/qcom-aoss-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
 #include <dt-bindings/reset/qcom,sdm845-pdc.h>
@@ -1893,14 +1892,15 @@
 			clock-names = "iface", "bus", "nav", "snoc_axi",
 				      "mnoc_axi", "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
-					<&rpmhpd SC7180_CX>,
+			power-domains = <&rpmhpd SC7180_CX>,
 					<&rpmhpd SC7180_MX>,
 					<&rpmhpd SC7180_MSS>;
-			power-domain-names = "load_state", "cx", "mx", "mss";
+			power-domain-names = "cx", "mx", "mss";
 
 			memory-region = <&mpss_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&modem_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -3116,7 +3116,6 @@
 			mboxes = <&apss_shared 0>;
 
 			#clock-cells = <0>;
-			#power-domain-cells = <1>;
 		};
 
 		spmi_bus: spmi@c440000 {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v4 06/13] arm64: dts: qcom: sc7280: Use QMP property to control load state
  2021-07-20  4:36 [PATCH v4 00/13] Use qmp_send to update co-processor load state Sibi Sankar
                   ` (4 preceding siblings ...)
  2021-07-20  4:36 ` [PATCH v4 05/13] arm64: dts: qcom: sc7180: Use QMP property to control " Sibi Sankar
@ 2021-07-20  4:36 ` Sibi Sankar
  2021-07-20  4:36 ` [PATCH v4 07/13] arm64: dts: qcom: sdm845: " Sibi Sankar
                   ` (6 subsequent siblings)
  12 siblings, 0 replies; 25+ messages in thread
From: Sibi Sankar @ 2021-07-20  4:36 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

Use the Qualcomm Mailbox Protocol (QMP) property to control the load
state resources on SC7280 SoCs and drop deprecated power-domains exposed
by AOSS QMP node.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index a8c274ad74c4..d1adf64e21e9 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -9,7 +9,6 @@
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
-#include <dt-bindings/power/qcom-aoss-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/reset/qcom,sdm845-aoss.h>
 #include <dt-bindings/reset/qcom,sdm845-pdc.h>
@@ -1149,7 +1148,6 @@
 					IPCC_MPROC_SIGNAL_GLINK_QMP>;
 
 			#clock-cells = <0>;
-			#power-domain-cells = <1>;
 		};
 
 		spmi_bus: spmi@c440000 {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v4 07/13] arm64: dts: qcom: sdm845: Use QMP property to control load state
  2021-07-20  4:36 [PATCH v4 00/13] Use qmp_send to update co-processor load state Sibi Sankar
                   ` (5 preceding siblings ...)
  2021-07-20  4:36 ` [PATCH v4 06/13] arm64: dts: qcom: sc7280: " Sibi Sankar
@ 2021-07-20  4:36 ` Sibi Sankar
  2021-07-20  4:36 ` [PATCH v4 08/13] arm64: dts: qcom: sm8150: " Sibi Sankar
                   ` (5 subsequent siblings)
  12 siblings, 0 replies; 25+ messages in thread
From: Sibi Sankar @ 2021-07-20  4:36 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

Use the Qualcomm Mailbox Protocol (QMP) property to control the load
state resources on SDM845 SoCs and drop deprecated power-domains exposed
by AOSS QMP node.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 1796ae8372be..8c3601810fb2 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2984,6 +2984,8 @@
 			clock-names = "iface", "bus", "mem", "gpll0_mss",
 				      "snoc_axi", "mnoc_axi", "prng", "xo";
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&modem_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -2993,11 +2995,10 @@
 
 			qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>;
 
-			power-domains = <&aoss_qmp 2>,
-					<&rpmhpd SDM845_CX>,
+			power-domains = <&rpmhpd SDM845_CX>,
 					<&rpmhpd SDM845_MX>,
 					<&rpmhpd SDM845_MSS>;
-			power-domain-names = "load_state", "cx", "mx", "mss";
+			power-domain-names = "cx", "mx", "mss";
 
 			mba {
 				memory-region = <&mba_region>;
@@ -4582,7 +4583,6 @@
 			mboxes = <&apss_shared 0>;
 
 			#clock-cells = <0>;
-			#power-domain-cells = <1>;
 
 			cx_cdev: cx {
 				#cooling-cells = <2>;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v4 08/13] arm64: dts: qcom: sm8150: Use QMP property to control load state
  2021-07-20  4:36 [PATCH v4 00/13] Use qmp_send to update co-processor load state Sibi Sankar
                   ` (6 preceding siblings ...)
  2021-07-20  4:36 ` [PATCH v4 07/13] arm64: dts: qcom: sdm845: " Sibi Sankar
@ 2021-07-20  4:36 ` Sibi Sankar
  2021-07-20  4:36 ` [PATCH v4 09/13] arm64: dts: qcom: sm8250: " Sibi Sankar
                   ` (4 subsequent siblings)
  12 siblings, 0 replies; 25+ messages in thread
From: Sibi Sankar @ 2021-07-20  4:36 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

Use the Qualcomm Mailbox Protocol (QMP) property to control the load
state resources on SM8150 SoCs and drop deprecated power-domains exposed
by AOSS QMP node.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 arch/arm64/boot/dts/qcom/sm8150.dtsi | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 612dda0fef43..7a040b74ef5a 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -6,7 +6,6 @@
 
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/power/qcom-aoss-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
@@ -1110,13 +1109,14 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>,
-					<&rpmhpd 3>,
+			power-domains = <&rpmhpd 3>,
 					<&rpmhpd 2>;
-			power-domain-names = "load_state", "lcx", "lmx";
+			power-domain-names = "lcx", "lmx";
 
 			memory-region = <&slpi_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&slpi_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -1560,13 +1560,14 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
-					<&rpmhpd 7>,
+			power-domains = <&rpmhpd 7>,
 					<&rpmhpd 0>;
-			power-domain-names = "load_state", "cx", "mss";
+			power-domain-names = "cx", "mss";
 
 			memory-region = <&mpss_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&modem_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -2186,12 +2187,12 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>,
-					<&rpmhpd 7>;
-			power-domain-names = "load_state", "cx";
+			power-domains = <&rpmhpd 7>;
 
 			memory-region = <&cdsp_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&cdsp_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -2415,7 +2416,6 @@
 			mboxes = <&apss_shared 0>;
 
 			#clock-cells = <0>;
-			#power-domain-cells = <1>;
 		};
 
 		tsens0: thermal-sensor@c263000 {
@@ -2562,12 +2562,12 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>,
-					<&rpmhpd 7>;
-			power-domain-names = "load_state", "cx";
+			power-domains = <&rpmhpd 7>;
 
 			memory-region = <&adsp_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&adsp_smp2p_out 0>;
 			qcom,smem-state-names = "stop";
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v4 09/13] arm64: dts: qcom: sm8250: Use QMP property to control load state
  2021-07-20  4:36 [PATCH v4 00/13] Use qmp_send to update co-processor load state Sibi Sankar
                   ` (7 preceding siblings ...)
  2021-07-20  4:36 ` [PATCH v4 08/13] arm64: dts: qcom: sm8150: " Sibi Sankar
@ 2021-07-20  4:36 ` Sibi Sankar
  2021-07-20  4:36 ` [PATCH v4 10/13] arm64: dts: qcom: sm8350: " Sibi Sankar
                   ` (3 subsequent siblings)
  12 siblings, 0 replies; 25+ messages in thread
From: Sibi Sankar @ 2021-07-20  4:36 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

Use the Qualcomm Mailbox Protocol (QMP) property to control the load
state resources on SM8250 SoCs and drop deprecated power-domains exposed
by AOSS QMP node.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 4798368b02ef..535b488575f1 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -13,7 +13,6 @@
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sm8250.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
-#include <dt-bindings/power/qcom-aoss-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
@@ -1968,13 +1967,14 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>,
-					<&rpmhpd SM8250_LCX>,
+			power-domains = <&rpmhpd SM8250_LCX>,
 					<&rpmhpd SM8250_LMX>;
-			power-domain-names = "load_state", "lcx", "lmx";
+			power-domain-names = "lcx", "lmx";
 
 			memory-region = <&slpi_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&smp2p_slpi_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -2034,12 +2034,12 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>,
-					<&rpmhpd SM8250_CX>;
-			power-domain-names = "load_state", "cx";
+			power-domains = <&rpmhpd SM8250_CX>;
 
 			memory-region = <&cdsp_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&smp2p_cdsp_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -2782,7 +2782,6 @@
 					IPCC_MPROC_SIGNAL_GLINK_QMP>;
 
 			#clock-cells = <0>;
-			#power-domain-cells = <1>;
 		};
 
 		spmi_bus: spmi@c440000 {
@@ -3699,13 +3698,14 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>,
-					<&rpmhpd SM8250_LCX>,
+			power-domains = <&rpmhpd SM8250_LCX>,
 					<&rpmhpd SM8250_LMX>;
-			power-domain-names = "load_state", "lcx", "lmx";
+			power-domain-names = "lcx", "lmx";
 
 			memory-region = <&adsp_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&smp2p_adsp_out 0>;
 			qcom,smem-state-names = "stop";
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v4 10/13] arm64: dts: qcom: sm8350: Use QMP property to control load state
  2021-07-20  4:36 [PATCH v4 00/13] Use qmp_send to update co-processor load state Sibi Sankar
                   ` (8 preceding siblings ...)
  2021-07-20  4:36 ` [PATCH v4 09/13] arm64: dts: qcom: sm8250: " Sibi Sankar
@ 2021-07-20  4:36 ` Sibi Sankar
  2021-07-20  4:36 ` [PATCH v4 11/13] soc: qcom: aoss: Drop power domain support Sibi Sankar
                   ` (2 subsequent siblings)
  12 siblings, 0 replies; 25+ messages in thread
From: Sibi Sankar @ 2021-07-20  4:36 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

Use the Qualcomm Mailbox Protocol (QMP) property to control the load
state resources on SM8350 SoCs and drop deprecated power-domains exposed
by AOSS QMP node.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 30 ++++++++++++++++--------------
 1 file changed, 16 insertions(+), 14 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 0d16392bb976..2d78a55f33c2 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -8,7 +8,6 @@
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/interconnect/qcom,sm8350.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
-#include <dt-bindings/power/qcom-aoss-qmp.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/thermal/thermal.h>
@@ -703,15 +702,16 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>,
-					<&rpmhpd 0>,
+			power-domains = <&rpmhpd 0>,
 					<&rpmhpd 12>;
-			power-domain-names = "load_state", "cx", "mss";
+			power-domain-names = "cx", "mss";
 
 			interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>;
 
 			memory-region = <&pil_modem_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&smp2p_modem_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -771,7 +771,6 @@
 			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
 
 			#clock-cells = <0>;
-			#power-domain-cells = <1>;
 		};
 
 		spmi_bus: spmi@c440000 {
@@ -1070,13 +1069,14 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>,
-					<&rpmhpd 4>,
+			power-domains = <&rpmhpd 4>,
 					<&rpmhpd 5>;
-			power-domain-names = "load_state", "lcx", "lmx";
+			power-domain-names = "lcx", "lmx";
 
 			memory-region = <&pil_slpi_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&smp2p_slpi_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -1110,15 +1110,16 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>,
-					<&rpmhpd 0>,
+			power-domains = <&rpmhpd 0>,
 					<&rpmhpd 10>;
-			power-domain-names = "load_state", "cx", "mxc";
+			power-domain-names = "cx", "mxc";
 
 			interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>;
 
 			memory-region = <&pil_cdsp_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&smp2p_cdsp_out 0>;
 			qcom,smem-state-names = "stop";
 
@@ -1344,13 +1345,14 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>,
-					<&rpmhpd 4>,
+			power-domains = <&rpmhpd 4>,
 					<&rpmhpd 5>;
-			power-domain-names = "load_state", "lcx", "lmx";
+			power-domain-names = "lcx", "lmx";
 
 			memory-region = <&pil_adsp_mem>;
 
+			qcom,qmp = <&aoss_qmp>;
+
 			qcom,smem-states = <&smp2p_adsp_out 0>;
 			qcom,smem-state-names = "stop";
 
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v4 11/13] soc: qcom: aoss: Drop power domain support
  2021-07-20  4:36 [PATCH v4 00/13] Use qmp_send to update co-processor load state Sibi Sankar
                   ` (9 preceding siblings ...)
  2021-07-20  4:36 ` [PATCH v4 10/13] arm64: dts: qcom: sm8350: " Sibi Sankar
@ 2021-07-20  4:36 ` Sibi Sankar
  2021-07-20 22:53   ` Matthias Kaehlcke
  2021-07-21  5:35   ` Stephen Boyd
  2021-07-20  4:36 ` [PATCH v4 12/13] dt-bindings: msm/dp: Remove aoss-qmp header Sibi Sankar
  2021-07-20  4:36 ` [PATCH v4 13/13] dt-bindings: soc: qcom: aoss: Delete unused power-domain definitions Sibi Sankar
  12 siblings, 2 replies; 25+ messages in thread
From: Sibi Sankar @ 2021-07-20  4:36 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

Strip out the load state power-domain support from the driver since the
low power mode signalling for the co-processors is now accessible through
the direct qmp message send interface.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---

v4:
 * Commit message change and drop incorrect cleanup on cooling
   device probe failures. [Matthias]

 drivers/soc/qcom/qcom_aoss.c | 107 -------------------------------------------
 1 file changed, 107 deletions(-)

diff --git a/drivers/soc/qcom/qcom_aoss.c b/drivers/soc/qcom/qcom_aoss.c
index 3f588921a7b1..dccc5d96fe0a 100644
--- a/drivers/soc/qcom/qcom_aoss.c
+++ b/drivers/soc/qcom/qcom_aoss.c
@@ -2,7 +2,6 @@
 /*
  * Copyright (c) 2019, Linaro Ltd
  */
-#include <dt-bindings/power/qcom-aoss-qmp.h>
 #include <linux/clk-provider.h>
 #include <linux/debugfs.h>
 #include <linux/interrupt.h>
@@ -11,7 +10,6 @@
 #include <linux/module.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
-#include <linux/pm_domain.h>
 #include <linux/thermal.h>
 #include <linux/slab.h>
 #include <linux/soc/qcom/qcom_aoss.h>
@@ -68,7 +66,6 @@ struct qmp_cooling_device {
  * @event: wait_queue for synchronization with the IRQ
  * @tx_lock: provides synchronization between multiple callers of qmp_send()
  * @qdss_clk: QDSS clock hw struct
- * @pd_data: genpd data
  * @cooling_devs: thermal cooling devices
  */
 struct qmp {
@@ -88,20 +85,12 @@ struct qmp {
 	struct mutex tx_lock;
 
 	struct clk_hw qdss_clk;
-	struct genpd_onecell_data pd_data;
 	struct qmp_cooling_device *cooling_devs;
 #if IS_ENABLED(CONFIG_DEBUG_FS)
 	struct dentry *debugfs_file;
 #endif /* CONFIG_DEBUG_FS */
 };
 
-struct qmp_pd {
-	struct qmp *qmp;
-	struct generic_pm_domain pd;
-};
-
-#define to_qmp_pd_resource(res) container_of(res, struct qmp_pd, pd)
-
 static void qmp_kick(struct qmp *qmp)
 {
 	mbox_send_message(qmp->mbox_chan, NULL);
@@ -330,95 +319,6 @@ static void qmp_qdss_clk_remove(struct qmp *qmp)
 	clk_hw_unregister(&qmp->qdss_clk);
 }
 
-static int qmp_pd_power_toggle(struct qmp_pd *res, bool enable)
-{
-	char buf[QMP_MSG_LEN] = {};
-
-	snprintf(buf, sizeof(buf),
-		 "{class: image, res: load_state, name: %s, val: %s}",
-		 res->pd.name, enable ? "on" : "off");
-	return qmp_send(res->qmp, buf, sizeof(buf));
-}
-
-static int qmp_pd_power_on(struct generic_pm_domain *domain)
-{
-	return qmp_pd_power_toggle(to_qmp_pd_resource(domain), true);
-}
-
-static int qmp_pd_power_off(struct generic_pm_domain *domain)
-{
-	return qmp_pd_power_toggle(to_qmp_pd_resource(domain), false);
-}
-
-static const char * const sdm845_resources[] = {
-	[AOSS_QMP_LS_CDSP] = "cdsp",
-	[AOSS_QMP_LS_LPASS] = "adsp",
-	[AOSS_QMP_LS_MODEM] = "modem",
-	[AOSS_QMP_LS_SLPI] = "slpi",
-	[AOSS_QMP_LS_SPSS] = "spss",
-	[AOSS_QMP_LS_VENUS] = "venus",
-};
-
-static int qmp_pd_add(struct qmp *qmp)
-{
-	struct genpd_onecell_data *data = &qmp->pd_data;
-	struct device *dev = qmp->dev;
-	struct qmp_pd *res;
-	size_t num = ARRAY_SIZE(sdm845_resources);
-	int ret;
-	int i;
-
-	res = devm_kcalloc(dev, num, sizeof(*res), GFP_KERNEL);
-	if (!res)
-		return -ENOMEM;
-
-	data->domains = devm_kcalloc(dev, num, sizeof(*data->domains),
-				     GFP_KERNEL);
-	if (!data->domains)
-		return -ENOMEM;
-
-	for (i = 0; i < num; i++) {
-		res[i].qmp = qmp;
-		res[i].pd.name = sdm845_resources[i];
-		res[i].pd.power_on = qmp_pd_power_on;
-		res[i].pd.power_off = qmp_pd_power_off;
-
-		ret = pm_genpd_init(&res[i].pd, NULL, true);
-		if (ret < 0) {
-			dev_err(dev, "failed to init genpd\n");
-			goto unroll_genpds;
-		}
-
-		data->domains[i] = &res[i].pd;
-	}
-
-	data->num_domains = i;
-
-	ret = of_genpd_add_provider_onecell(dev->of_node, data);
-	if (ret < 0)
-		goto unroll_genpds;
-
-	return 0;
-
-unroll_genpds:
-	for (i--; i >= 0; i--)
-		pm_genpd_remove(data->domains[i]);
-
-	return ret;
-}
-
-static void qmp_pd_remove(struct qmp *qmp)
-{
-	struct genpd_onecell_data *data = &qmp->pd_data;
-	struct device *dev = qmp->dev;
-	int i;
-
-	of_genpd_del_provider(dev->of_node);
-
-	for (i = 0; i < data->num_domains; i++)
-		pm_genpd_remove(data->domains[i]);
-}
-
 static int qmp_cdev_get_max_state(struct thermal_cooling_device *cdev,
 				  unsigned long *state)
 {
@@ -650,10 +550,6 @@ static int qmp_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_close_qmp;
 
-	ret = qmp_pd_add(qmp);
-	if (ret)
-		goto err_remove_qdss_clk;
-
 	ret = qmp_cooling_devices_register(qmp);
 	if (ret)
 		dev_err(&pdev->dev, "failed to register aoss cooling devices\n");
@@ -669,8 +565,6 @@ static int qmp_probe(struct platform_device *pdev)
 
 	return 0;
 
-err_remove_qdss_clk:
-	qmp_qdss_clk_remove(qmp);
 err_close_qmp:
 	qmp_close(qmp);
 err_free_mbox:
@@ -689,7 +583,6 @@ static int qmp_remove(struct platform_device *pdev)
 #endif /* CONFIG_DEBUG_FS */
 
 	qmp_qdss_clk_remove(qmp);
-	qmp_pd_remove(qmp);
 	qmp_cooling_devices_remove(qmp);
 
 	qmp_close(qmp);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v4 12/13] dt-bindings: msm/dp: Remove aoss-qmp header
  2021-07-20  4:36 [PATCH v4 00/13] Use qmp_send to update co-processor load state Sibi Sankar
                   ` (10 preceding siblings ...)
  2021-07-20  4:36 ` [PATCH v4 11/13] soc: qcom: aoss: Drop power domain support Sibi Sankar
@ 2021-07-20  4:36 ` Sibi Sankar
  2021-07-21  5:16   ` Stephen Boyd
  2021-07-20  4:36 ` [PATCH v4 13/13] dt-bindings: soc: qcom: aoss: Delete unused power-domain definitions Sibi Sankar
  12 siblings, 1 reply; 25+ messages in thread
From: Sibi Sankar @ 2021-07-20  4:36 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

Remove the unused aoss-qmp header from the list of includes.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/display/msm/dp-controller.yaml | 1 -
 1 file changed, 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
index 64d8d9e5e47a..d89b3c510c27 100644
--- a/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dp-controller.yaml
@@ -95,7 +95,6 @@ examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/clock/qcom,dispcc-sc7180.h>
-    #include <dt-bindings/power/qcom-aoss-qmp.h>
     #include <dt-bindings/power/qcom-rpmpd.h>
 
     displayport-controller@ae90000 {
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 25+ messages in thread

* [PATCH v4 13/13] dt-bindings: soc: qcom: aoss: Delete unused power-domain definitions
  2021-07-20  4:36 [PATCH v4 00/13] Use qmp_send to update co-processor load state Sibi Sankar
                   ` (11 preceding siblings ...)
  2021-07-20  4:36 ` [PATCH v4 12/13] dt-bindings: msm/dp: Remove aoss-qmp header Sibi Sankar
@ 2021-07-20  4:36 ` Sibi Sankar
  12 siblings, 0 replies; 25+ messages in thread
From: Sibi Sankar @ 2021-07-20  4:36 UTC (permalink / raw)
  To: mka, swboyd, bjorn.andersson, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup, Sibi Sankar

Delete unused power-domain definitions exposed by AOSS QMP.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
 include/dt-bindings/power/qcom-aoss-qmp.h | 14 --------------
 1 file changed, 14 deletions(-)
 delete mode 100644 include/dt-bindings/power/qcom-aoss-qmp.h

diff --git a/include/dt-bindings/power/qcom-aoss-qmp.h b/include/dt-bindings/power/qcom-aoss-qmp.h
deleted file mode 100644
index ec336d31dee4..000000000000
--- a/include/dt-bindings/power/qcom-aoss-qmp.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Copyright (c) 2018, Linaro Ltd. */
-
-#ifndef __DT_BINDINGS_POWER_QCOM_AOSS_QMP_H
-#define __DT_BINDINGS_POWER_QCOM_AOSS_QMP_H
-
-#define AOSS_QMP_LS_CDSP		0
-#define AOSS_QMP_LS_LPASS	1
-#define AOSS_QMP_LS_MODEM	2
-#define AOSS_QMP_LS_SLPI		3
-#define AOSS_QMP_LS_SPSS		4
-#define AOSS_QMP_LS_VENUS	5
-
-#endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 01/13] dt-bindings: soc: qcom: aoss: Drop the load state power-domain
  2021-07-20  4:36 ` [PATCH v4 01/13] dt-bindings: soc: qcom: aoss: Drop the load state power-domain Sibi Sankar
@ 2021-07-20 21:10   ` Matthias Kaehlcke
  2021-07-21  5:31   ` Stephen Boyd
  2021-07-26 22:37   ` Rob Herring
  2 siblings, 0 replies; 25+ messages in thread
From: Matthias Kaehlcke @ 2021-07-20 21:10 UTC (permalink / raw)
  To: Sibi Sankar
  Cc: swboyd, bjorn.andersson, robh+dt, ulf.hansson, rjw, agross, ohad,
	mathieu.poirier, linux-arm-msm, linux-remoteproc, devicetree,
	linux-kernel, dianders, rishabhb, sidgup

On Tue, Jul 20, 2021 at 10:06:35AM +0530, Sibi Sankar wrote:
> The power-domains exposed by AOSS QMP node are used to notify the Always
> on Subsystem (AOSS) that a particular co-processor is up/down. These
> co-processors enter low-power modes independent to that of the application
> processor and their states are expected to remain unaltered across system
> suspend/resume cycles. To achieve this behavior let's drop the load
> power-domain and replace them with generic qmp_send interface instead.
> 
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 11/13] soc: qcom: aoss: Drop power domain support
  2021-07-20  4:36 ` [PATCH v4 11/13] soc: qcom: aoss: Drop power domain support Sibi Sankar
@ 2021-07-20 22:53   ` Matthias Kaehlcke
  2021-07-21  5:35   ` Stephen Boyd
  1 sibling, 0 replies; 25+ messages in thread
From: Matthias Kaehlcke @ 2021-07-20 22:53 UTC (permalink / raw)
  To: Sibi Sankar
  Cc: swboyd, bjorn.andersson, robh+dt, ulf.hansson, rjw, agross, ohad,
	mathieu.poirier, linux-arm-msm, linux-remoteproc, devicetree,
	linux-kernel, dianders, rishabhb, sidgup

On Tue, Jul 20, 2021 at 10:06:45AM +0530, Sibi Sankar wrote:
> Strip out the load state power-domain support from the driver since the
> low power mode signalling for the co-processors is now accessible through
> the direct qmp message send interface.
> 
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 02/13] dt-bindings: remoteproc: qcom: pas: Add QMP property
  2021-07-20  4:36 ` [PATCH v4 02/13] dt-bindings: remoteproc: qcom: pas: Add QMP property Sibi Sankar
@ 2021-07-20 23:10   ` Matthias Kaehlcke
  2021-07-21 16:58     ` Sibi Sankar
  0 siblings, 1 reply; 25+ messages in thread
From: Matthias Kaehlcke @ 2021-07-20 23:10 UTC (permalink / raw)
  To: Sibi Sankar
  Cc: swboyd, bjorn.andersson, robh+dt, ulf.hansson, rjw, agross, ohad,
	mathieu.poirier, linux-arm-msm, linux-remoteproc, devicetree,
	linux-kernel, dianders, rishabhb, sidgup

On Tue, Jul 20, 2021 at 10:06:36AM +0530, Sibi Sankar wrote:
> The load state power-domain, used by the co-processors to notify the
> Always on Subsystem (AOSS) that a particular co-processor is up/down,
> suffers from the side-effect of changing states during suspend/resume.
> However the co-processors enter low-power modes independent to that of
> the application processor and their states are expected to remain
> unaltered across system suspend/resume cycles. To achieve this behavior
> let's drop the load state power-domain and replace them with the qmp
> property for all SoCs supporting low power mode signalling.
> 
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> ---
> 
> v4:
>  * Commit message change and sc8180x co-processor addition. [Rob/Bjorn]
> 
>  .../devicetree/bindings/remoteproc/qcom,adsp.yaml  | 65 +++++++++++-----------
>  1 file changed, 33 insertions(+), 32 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
> index c597ccced623..1182afb5f593 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
> @@ -78,11 +78,11 @@ properties:
>  
>    power-domains:
>      minItems: 1
> -    maxItems: 3
> +    maxItems: 2
>  
>    power-domain-names:
>      minItems: 1
> -    maxItems: 3
> +    maxItems: 2

It seems maxItems should have been 4 in the first place and should remain
unchanged after removing the load state power domain. With this patch:

  - if:
      properties:
        compatible:
          contains:
            enum:
              - qcom,sc7180-mpss-pas
    then:
      properties:
        power-domains:
          items:
            - description: CX power domain
            - description: MX power domain
            - description: MSS power domain
        power-domain-names:
          items:
            - const: cx
            - const: mx
            - const: mss


^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 12/13] dt-bindings: msm/dp: Remove aoss-qmp header
  2021-07-20  4:36 ` [PATCH v4 12/13] dt-bindings: msm/dp: Remove aoss-qmp header Sibi Sankar
@ 2021-07-21  5:16   ` Stephen Boyd
  0 siblings, 0 replies; 25+ messages in thread
From: Stephen Boyd @ 2021-07-21  5:16 UTC (permalink / raw)
  To: Sibi Sankar, bjorn.andersson, mka, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup

Quoting Sibi Sankar (2021-07-19 21:36:46)
> Remove the unused aoss-qmp header from the list of includes.
>
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> Acked-by: Rob Herring <robh@kernel.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 04/13] remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state
  2021-07-20  4:36 ` [PATCH v4 04/13] remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state Sibi Sankar
@ 2021-07-21  5:26   ` Stephen Boyd
  2021-07-21 17:27     ` Sibi Sankar
  2021-07-30 16:36   ` Bjorn Andersson
  1 sibling, 1 reply; 25+ messages in thread
From: Stephen Boyd @ 2021-07-21  5:26 UTC (permalink / raw)
  To: Sibi Sankar, bjorn.andersson, mka, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup

Quoting Sibi Sankar (2021-07-19 21:36:38)
> diff --git a/drivers/remoteproc/qcom_q6v5.c b/drivers/remoteproc/qcom_q6v5.c
> index 7e9244c748da..997ff21271f7 100644
> --- a/drivers/remoteproc/qcom_q6v5.c
> +++ b/drivers/remoteproc/qcom_q6v5.c
> @@ -16,8 +16,28 @@
>  #include "qcom_common.h"
>  #include "qcom_q6v5.h"
>
> +#define Q6V5_LOAD_STATE_MSG_LEN        64
>  #define Q6V5_PANIC_DELAY_MS    200
>
> +static int q6v5_load_state_toggle(struct qcom_q6v5 *q6v5, bool enable)
> +{
> +       char buf[Q6V5_LOAD_STATE_MSG_LEN] = {};

Just to confirm, we want to set the whole buffer to zero before writing
it? Sounds good to not send stack junk over to to the other side but
maybe we could skip initializing to zero for the first part of the
buffer that isn't used?

> +       int ret;
> +
> +       if (IS_ERR(q6v5->qmp))
> +               return 0;
> +
> +       snprintf(buf, sizeof(buf),
> +                "{class: image, res: load_state, name: %s, val: %s}",
> +                q6v5->load_state, enable ? "on" : "off");

Should we WARN_ON() if the message doesn't fit into the 64-bytes?

> +
> +       ret = qmp_send(q6v5->qmp, buf, sizeof(buf));
> +       if (ret)
> +               dev_err(q6v5->dev, "failed to toggle load state\n");
> +
> +       return ret;
> +}
> +
>  /**
>   * qcom_q6v5_prepare() - reinitialize the qcom_q6v5 context before start
>   * @q6v5:      reference to qcom_q6v5 context to be reinitialized
> @@ -196,12 +223,13 @@ EXPORT_SYMBOL_GPL(qcom_q6v5_panic);
>   * @pdev:      platform_device reference for acquiring resources
>   * @rproc:     associated remoteproc instance
>   * @crash_reason: SMEM id for crash reason string, or 0 if none
> + * @load_state: load state resource string
>   * @handover:  function to be called when proxy resources should be released
>   *
>   * Return: 0 on success, negative errno on failure
>   */
>  int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
> -                  struct rproc *rproc, int crash_reason,
> +                  struct rproc *rproc, int crash_reason, const char *load_state,
>                    void (*handover)(struct qcom_q6v5 *q6v5))
>  {
>         int ret;
> @@ -286,9 +314,36 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
>                 return PTR_ERR(q6v5->state);
>         }
>
> +       q6v5->load_state = kstrdup_const(load_state, GFP_KERNEL);
> +       q6v5->qmp = qmp_get(&pdev->dev);
> +       if (IS_ERR(q6v5->qmp)) {
> +               if (PTR_ERR(q6v5->qmp) != -ENODEV) {
> +                       if (PTR_ERR(q6v5->qmp) != -EPROBE_DEFER)
> +                               dev_err(&pdev->dev, "failed to acquire load state\n");

Use dev_err_probe()?

> +                       kfree_const(q6v5->load_state);
> +                       return PTR_ERR(q6v5->qmp);
> +               }
> +       } else {
> +               if (!q6v5->load_state) {

Use else if and deindent?

> +                       dev_err(&pdev->dev, "load state resource string empty\n");
> +                       return -EINVAL;
> +               }
> +       }
> +
>         return 0;
>  }
>  EXPORT_SYMBOL_GPL(qcom_q6v5_init);
>

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 01/13] dt-bindings: soc: qcom: aoss: Drop the load state power-domain
  2021-07-20  4:36 ` [PATCH v4 01/13] dt-bindings: soc: qcom: aoss: Drop the load state power-domain Sibi Sankar
  2021-07-20 21:10   ` Matthias Kaehlcke
@ 2021-07-21  5:31   ` Stephen Boyd
  2021-07-26 22:37   ` Rob Herring
  2 siblings, 0 replies; 25+ messages in thread
From: Stephen Boyd @ 2021-07-21  5:31 UTC (permalink / raw)
  To: Sibi Sankar, bjorn.andersson, mka, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup

Quoting Sibi Sankar (2021-07-19 21:36:35)
> The power-domains exposed by AOSS QMP node are used to notify the Always
> on Subsystem (AOSS) that a particular co-processor is up/down. These
> co-processors enter low-power modes independent to that of the application
> processor and their states are expected to remain unaltered across system
> suspend/resume cycles. To achieve this behavior let's drop the load
> power-domain and replace them with generic qmp_send interface instead.
>
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 11/13] soc: qcom: aoss: Drop power domain support
  2021-07-20  4:36 ` [PATCH v4 11/13] soc: qcom: aoss: Drop power domain support Sibi Sankar
  2021-07-20 22:53   ` Matthias Kaehlcke
@ 2021-07-21  5:35   ` Stephen Boyd
  1 sibling, 0 replies; 25+ messages in thread
From: Stephen Boyd @ 2021-07-21  5:35 UTC (permalink / raw)
  To: Sibi Sankar, bjorn.andersson, mka, robh+dt
  Cc: ulf.hansson, rjw, agross, ohad, mathieu.poirier, linux-arm-msm,
	linux-remoteproc, devicetree, linux-kernel, dianders, rishabhb,
	sidgup

Quoting Sibi Sankar (2021-07-19 21:36:45)
> Strip out the load state power-domain support from the driver since the
> low power mode signalling for the co-processors is now accessible through
> the direct qmp message send interface.
>
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 02/13] dt-bindings: remoteproc: qcom: pas: Add QMP property
  2021-07-20 23:10   ` Matthias Kaehlcke
@ 2021-07-21 16:58     ` Sibi Sankar
  0 siblings, 0 replies; 25+ messages in thread
From: Sibi Sankar @ 2021-07-21 16:58 UTC (permalink / raw)
  To: Matthias Kaehlcke
  Cc: swboyd, bjorn.andersson, robh+dt, ulf.hansson, rjw, agross, ohad,
	mathieu.poirier, linux-arm-msm, linux-remoteproc, devicetree,
	linux-kernel, dianders, rishabhb, sidgup

Hey Matthias,

Thanks for taking time to review
the series.

On 2021-07-21 04:40, Matthias Kaehlcke wrote:
> On Tue, Jul 20, 2021 at 10:06:36AM +0530, Sibi Sankar wrote:
>> The load state power-domain, used by the co-processors to notify the
>> Always on Subsystem (AOSS) that a particular co-processor is up/down,
>> suffers from the side-effect of changing states during suspend/resume.
>> However the co-processors enter low-power modes independent to that of
>> the application processor and their states are expected to remain
>> unaltered across system suspend/resume cycles. To achieve this 
>> behavior
>> let's drop the load state power-domain and replace them with the qmp
>> property for all SoCs supporting low power mode signalling.
>> 
>> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
>> ---
>> 
>> v4:
>>  * Commit message change and sc8180x co-processor addition. 
>> [Rob/Bjorn]
>> 
>>  .../devicetree/bindings/remoteproc/qcom,adsp.yaml  | 65 
>> +++++++++++-----------
>>  1 file changed, 33 insertions(+), 32 deletions(-)
>> 
>> diff --git 
>> a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml 
>> b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
>> index c597ccced623..1182afb5f593 100644
>> --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
>> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
>> @@ -78,11 +78,11 @@ properties:
>> 
>>    power-domains:
>>      minItems: 1
>> -    maxItems: 3
>> +    maxItems: 2
>> 
>>    power-domain-names:
>>      minItems: 1
>> -    maxItems: 3
>> +    maxItems: 2
> 
> It seems maxItems should have been 4 in the first place and should 
> remain
> unchanged after removing the load state power domain. With this patch:

sc7180-mpss-pas actually uses only
cx and mss. The mpss-pas compatible
is overridden by the mss-pil compatible
for all the platforms present upstream
for sc7180, that's the reason we probably
haven't run into any binding check failures.
I'll keep the max-items to 2 and fix-up
the sc7180 power-domain requirements
instead.

> 
>   - if:
>       properties:
>         compatible:
>           contains:
>             enum:
>               - qcom,sc7180-mpss-pas
>     then:
>       properties:
>         power-domains:
>           items:
>             - description: CX power domain
>             - description: MX power domain
>             - description: MSS power domain
>         power-domain-names:
>           items:
>             - const: cx
>             - const: mx
>             - const: mss

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 04/13] remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state
  2021-07-21  5:26   ` Stephen Boyd
@ 2021-07-21 17:27     ` Sibi Sankar
  0 siblings, 0 replies; 25+ messages in thread
From: Sibi Sankar @ 2021-07-21 17:27 UTC (permalink / raw)
  To: Stephen Boyd
  Cc: bjorn.andersson, mka, robh+dt, ulf.hansson, rjw, agross, ohad,
	mathieu.poirier, linux-arm-msm, linux-remoteproc, devicetree,
	linux-kernel, dianders, rishabhb, sidgup

On 2021-07-21 10:56, Stephen Boyd wrote:
> Quoting Sibi Sankar (2021-07-19 21:36:38)
>> diff --git a/drivers/remoteproc/qcom_q6v5.c 
>> b/drivers/remoteproc/qcom_q6v5.c
>> index 7e9244c748da..997ff21271f7 100644
>> --- a/drivers/remoteproc/qcom_q6v5.c
>> +++ b/drivers/remoteproc/qcom_q6v5.c
>> @@ -16,8 +16,28 @@
>>  #include "qcom_common.h"
>>  #include "qcom_q6v5.h"
>> 
>> +#define Q6V5_LOAD_STATE_MSG_LEN        64
>>  #define Q6V5_PANIC_DELAY_MS    200
>> 
>> +static int q6v5_load_state_toggle(struct qcom_q6v5 *q6v5, bool 
>> enable)
>> +{
>> +       char buf[Q6V5_LOAD_STATE_MSG_LEN] = {};
> 
> Just to confirm, we want to set the whole buffer to zero before writing
> it? Sounds good to not send stack junk over to to the other side but
> maybe we could skip initializing to zero for the first part of the
> buffer that isn't used?

Sure, it makes sense to incorporate
a warn_on and memset the remainder
of the buffer after populating it.

> 
>> +       int ret;
>> +
>> +       if (IS_ERR(q6v5->qmp))
>> +               return 0;
>> +
>> +       snprintf(buf, sizeof(buf),
>> +                "{class: image, res: load_state, name: %s, val: %s}",
>> +                q6v5->load_state, enable ? "on" : "off");
> 
> Should we WARN_ON() if the message doesn't fit into the 64-bytes?
> 
>> +
>> +       ret = qmp_send(q6v5->qmp, buf, sizeof(buf));
>> +       if (ret)
>> +               dev_err(q6v5->dev, "failed to toggle load state\n");
>> +
>> +       return ret;
>> +}
>> +
>>  /**
>>   * qcom_q6v5_prepare() - reinitialize the qcom_q6v5 context before 
>> start
>>   * @q6v5:      reference to qcom_q6v5 context to be reinitialized
>> @@ -196,12 +223,13 @@ EXPORT_SYMBOL_GPL(qcom_q6v5_panic);
>>   * @pdev:      platform_device reference for acquiring resources
>>   * @rproc:     associated remoteproc instance
>>   * @crash_reason: SMEM id for crash reason string, or 0 if none
>> + * @load_state: load state resource string
>>   * @handover:  function to be called when proxy resources should be 
>> released
>>   *
>>   * Return: 0 on success, negative errno on failure
>>   */
>>  int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device 
>> *pdev,
>> -                  struct rproc *rproc, int crash_reason,
>> +                  struct rproc *rproc, int crash_reason, const char 
>> *load_state,
>>                    void (*handover)(struct qcom_q6v5 *q6v5))
>>  {
>>         int ret;
>> @@ -286,9 +314,36 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct 
>> platform_device *pdev,
>>                 return PTR_ERR(q6v5->state);
>>         }
>> 
>> +       q6v5->load_state = kstrdup_const(load_state, GFP_KERNEL);
>> +       q6v5->qmp = qmp_get(&pdev->dev);
>> +       if (IS_ERR(q6v5->qmp)) {
>> +               if (PTR_ERR(q6v5->qmp) != -ENODEV) {
>> +                       if (PTR_ERR(q6v5->qmp) != -EPROBE_DEFER)
>> +                               dev_err(&pdev->dev, "failed to acquire 
>> load state\n");
> 
> Use dev_err_probe()?

sure I'll use it.

> 
>> +                       kfree_const(q6v5->load_state);
>> +                       return PTR_ERR(q6v5->qmp);
>> +               }
>> +       } else {
>> +               if (!q6v5->load_state) {
> 
> Use else if and deindent?

lol, my bad.

> 
>> +                       dev_err(&pdev->dev, "load state resource 
>> string empty\n");
>> +                       return -EINVAL;
>> +               }
>> +       }
>> +
>>         return 0;
>>  }
>>  EXPORT_SYMBOL_GPL(qcom_q6v5_init);
>> 

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project.

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 01/13] dt-bindings: soc: qcom: aoss: Drop the load state power-domain
  2021-07-20  4:36 ` [PATCH v4 01/13] dt-bindings: soc: qcom: aoss: Drop the load state power-domain Sibi Sankar
  2021-07-20 21:10   ` Matthias Kaehlcke
  2021-07-21  5:31   ` Stephen Boyd
@ 2021-07-26 22:37   ` Rob Herring
  2 siblings, 0 replies; 25+ messages in thread
From: Rob Herring @ 2021-07-26 22:37 UTC (permalink / raw)
  To: Sibi Sankar
  Cc: rishabhb, devicetree, dianders, linux-kernel, agross,
	mathieu.poirier, linux-arm-msm, linux-remoteproc, sidgup, ohad,
	swboyd, bjorn.andersson, ulf.hansson, robh+dt, rjw, mka

On Tue, 20 Jul 2021 10:06:35 +0530, Sibi Sankar wrote:
> The power-domains exposed by AOSS QMP node are used to notify the Always
> on Subsystem (AOSS) that a particular co-processor is up/down. These
> co-processors enter low-power modes independent to that of the application
> processor and their states are expected to remain unaltered across system
> suspend/resume cycles. To achieve this behavior let's drop the load
> power-domain and replace them with generic qmp_send interface instead.
> 
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> ---
> 
> v4:
>  * Rebase patch due to the recent aoss-qmp yaml conversion (Dropping Rb).
> 
>  Documentation/devicetree/bindings/soc/qcom/qcom,aoss-qmp.yaml | 11 +----------
>  1 file changed, 1 insertion(+), 10 deletions(-)
> 

Acked-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 25+ messages in thread

* Re: [PATCH v4 04/13] remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state
  2021-07-20  4:36 ` [PATCH v4 04/13] remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state Sibi Sankar
  2021-07-21  5:26   ` Stephen Boyd
@ 2021-07-30 16:36   ` Bjorn Andersson
  1 sibling, 0 replies; 25+ messages in thread
From: Bjorn Andersson @ 2021-07-30 16:36 UTC (permalink / raw)
  To: Sibi Sankar
  Cc: mka, swboyd, robh+dt, ulf.hansson, rjw, agross, ohad,
	mathieu.poirier, linux-arm-msm, linux-remoteproc, devicetree,
	linux-kernel, dianders, rishabhb, sidgup

On Mon 19 Jul 23:36 CDT 2021, Sibi Sankar wrote:

> The power domains exposed by the AOSS QMP driver control the load state
> resources linked to modem, adsp, cdsp remoteprocs. These are used to
> notify the Always on Subsystem (AOSS) that a particular co-processor is
> up/down. AOSS uses this information to wait for the co-processors to
> suspend before starting its sleep sequence.
> 
> These co-processors enter low-power modes independent to that of the
> application processor and the load state resources linked to them are
> expected to remain unaltered across system suspend/resume cycles. To
> achieve this behavior lets stop using the power-domains exposed by the
> AOSS QMP node and replace them with generic qmp_send interface instead.
> 
> Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
> ---
> 
> v4:
>  * Drop unused pdev and kfree the load state string in q6v5_deinit
>    /probe path for patch 4. [Matthias]
> 
>  drivers/remoteproc/qcom_q6v5.c      | 57 ++++++++++++++++++++++++-
>  drivers/remoteproc/qcom_q6v5.h      |  7 ++-
>  drivers/remoteproc/qcom_q6v5_adsp.c |  7 ++-
>  drivers/remoteproc/qcom_q6v5_mss.c  | 44 ++++---------------
>  drivers/remoteproc/qcom_q6v5_pas.c  | 85 +++++++++----------------------------
>  drivers/remoteproc/qcom_q6v5_wcss.c |  4 +-
>  6 files changed, 96 insertions(+), 108 deletions(-)
> 
> diff --git a/drivers/remoteproc/qcom_q6v5.c b/drivers/remoteproc/qcom_q6v5.c
> index 7e9244c748da..997ff21271f7 100644
> --- a/drivers/remoteproc/qcom_q6v5.c
> +++ b/drivers/remoteproc/qcom_q6v5.c
> @@ -16,8 +16,28 @@
>  #include "qcom_common.h"
>  #include "qcom_q6v5.h"
>  
> +#define Q6V5_LOAD_STATE_MSG_LEN	64
>  #define Q6V5_PANIC_DELAY_MS	200
>  
> +static int q6v5_load_state_toggle(struct qcom_q6v5 *q6v5, bool enable)
> +{
> +	char buf[Q6V5_LOAD_STATE_MSG_LEN] = {};
> +	int ret;
> +
> +	if (IS_ERR(q6v5->qmp))

I would prefer that you keep it NULL when there's no qmp.

> +		return 0;
> +
> +	snprintf(buf, sizeof(buf),
> +		 "{class: image, res: load_state, name: %s, val: %s}",
> +		 q6v5->load_state, enable ? "on" : "off");
> +
> +	ret = qmp_send(q6v5->qmp, buf, sizeof(buf));
> +	if (ret)
> +		dev_err(q6v5->dev, "failed to toggle load state\n");
> +
> +	return ret;
> +}
> +
>  /**
>   * qcom_q6v5_prepare() - reinitialize the qcom_q6v5 context before start
>   * @q6v5:	reference to qcom_q6v5 context to be reinitialized
> @@ -26,6 +46,12 @@
>   */
>  int qcom_q6v5_prepare(struct qcom_q6v5 *q6v5)
>  {
> +	int ret;
> +
> +	ret = q6v5_load_state_toggle(q6v5, true);
> +	if (ret)
> +		return ret;
> +
>  	reinit_completion(&q6v5->start_done);
>  	reinit_completion(&q6v5->stop_done);
>  
> @@ -47,6 +73,7 @@ EXPORT_SYMBOL_GPL(qcom_q6v5_prepare);
>  int qcom_q6v5_unprepare(struct qcom_q6v5 *q6v5)
>  {
>  	disable_irq(q6v5->handover_irq);
> +	q6v5_load_state_toggle(q6v5, false);
>  
>  	return !q6v5->handover_issued;
>  }
> @@ -196,12 +223,13 @@ EXPORT_SYMBOL_GPL(qcom_q6v5_panic);
>   * @pdev:	platform_device reference for acquiring resources
>   * @rproc:	associated remoteproc instance
>   * @crash_reason: SMEM id for crash reason string, or 0 if none
> + * @load_state: load state resource string
>   * @handover:	function to be called when proxy resources should be released
>   *
>   * Return: 0 on success, negative errno on failure
>   */
>  int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
> -		   struct rproc *rproc, int crash_reason,
> +		   struct rproc *rproc, int crash_reason, const char *load_state,
>  		   void (*handover)(struct qcom_q6v5 *q6v5))
>  {
>  	int ret;
> @@ -286,9 +314,36 @@ int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
>  		return PTR_ERR(q6v5->state);
>  	}
>  
> +	q6v5->load_state = kstrdup_const(load_state, GFP_KERNEL);

Can't you use devm_kstrdup_const(&pdev->dev, ...) for this?

> +	q6v5->qmp = qmp_get(&pdev->dev);
> +	if (IS_ERR(q6v5->qmp)) {
> +		if (PTR_ERR(q6v5->qmp) != -ENODEV) {
> +			if (PTR_ERR(q6v5->qmp) != -EPROBE_DEFER)
> +				dev_err(&pdev->dev, "failed to acquire load state\n");
> +			kfree_const(q6v5->load_state);

Then you don't need to free it here.

> +			return PTR_ERR(q6v5->qmp);
> +		}
> +	} else {
> +		if (!q6v5->load_state) {
> +			dev_err(&pdev->dev, "load state resource string empty\n");
> +			return -EINVAL;

I see two cases here:

1) kstrdup_const() failed to allocate memory, the error print is
unnecessary and misleading and it would be more appropriate to return
-ENOMEM.

2) kstrdup_const() failed because you passed load_state == NULL, in
which case the error message could be more helpful by saying "unexpected
qcom,qmp property found" or something like that.

> +		}
> +	}
> +
>  	return 0;
>  }
>  EXPORT_SYMBOL_GPL(qcom_q6v5_init);
>  
> +/**
> + * qcom_q6v5_deinit() - deinitialize the q6v5 common struct
> + * @q6v5:	reference to qcom_q6v5 context to be deinitialized
> + */
> +void qcom_q6v5_deinit(struct qcom_q6v5 *q6v5)
> +{
> +	kfree_const(q6v5->load_state);
> +	qmp_put(q6v5->qmp);
> +}
> +EXPORT_SYMBOL_GPL(qcom_q6v5_deinit);
> +
>  MODULE_LICENSE("GPL v2");
>  MODULE_DESCRIPTION("Qualcomm Peripheral Image Loader for Q6V5");
> diff --git a/drivers/remoteproc/qcom_q6v5.h b/drivers/remoteproc/qcom_q6v5.h
> index 1c212f670cbc..f35e04471ed7 100644
> --- a/drivers/remoteproc/qcom_q6v5.h
> +++ b/drivers/remoteproc/qcom_q6v5.h
> @@ -5,6 +5,7 @@
>  
>  #include <linux/kernel.h>
>  #include <linux/completion.h>
> +#include <linux/soc/qcom/qcom_aoss.h>
>  
>  struct rproc;
>  struct qcom_smem_state;
> @@ -15,6 +16,8 @@ struct qcom_q6v5 {
>  	struct rproc *rproc;
>  
>  	struct qcom_smem_state *state;
> +	struct qmp *qmp;
> +
>  	unsigned stop_bit;
>  
>  	int wdog_irq;
> @@ -32,12 +35,14 @@ struct qcom_q6v5 {
>  
>  	bool running;
>  
> +	const char *load_state;
>  	void (*handover)(struct qcom_q6v5 *q6v5);
>  };
>  
>  int qcom_q6v5_init(struct qcom_q6v5 *q6v5, struct platform_device *pdev,
> -		   struct rproc *rproc, int crash_reason,
> +		   struct rproc *rproc, int crash_reason, const char *load_state,
>  		   void (*handover)(struct qcom_q6v5 *q6v5));
> +void qcom_q6v5_deinit(struct qcom_q6v5 *q6v5);
>  
>  int qcom_q6v5_prepare(struct qcom_q6v5 *q6v5);
>  int qcom_q6v5_unprepare(struct qcom_q6v5 *q6v5);
> diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
> index 8b0d8bbacd2e..098362e6e233 100644
> --- a/drivers/remoteproc/qcom_q6v5_adsp.c
> +++ b/drivers/remoteproc/qcom_q6v5_adsp.c
> @@ -185,7 +185,9 @@ static int adsp_start(struct rproc *rproc)
>  	int ret;
>  	unsigned int val;
>  
> -	qcom_q6v5_prepare(&adsp->q6v5);
> +	ret = qcom_q6v5_prepare(&adsp->q6v5);
> +	if (ret)
> +		return ret;

In the (hopefully unlikely) case that we have instances of
qcom_q6v5_prepare() failing today, the switch to the new qmp interface
would also introduce a regression in the same commit.

Could you please add the error handling in a separate commit? Just so
that we can pinpoint which of the two changes caused any issues if we
need to bisect this?

Regards,
Bjorn

^ permalink raw reply	[flat|nested] 25+ messages in thread

end of thread, other threads:[~2021-07-30 16:36 UTC | newest]

Thread overview: 25+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-20  4:36 [PATCH v4 00/13] Use qmp_send to update co-processor load state Sibi Sankar
2021-07-20  4:36 ` [PATCH v4 01/13] dt-bindings: soc: qcom: aoss: Drop the load state power-domain Sibi Sankar
2021-07-20 21:10   ` Matthias Kaehlcke
2021-07-21  5:31   ` Stephen Boyd
2021-07-26 22:37   ` Rob Herring
2021-07-20  4:36 ` [PATCH v4 02/13] dt-bindings: remoteproc: qcom: pas: Add QMP property Sibi Sankar
2021-07-20 23:10   ` Matthias Kaehlcke
2021-07-21 16:58     ` Sibi Sankar
2021-07-20  4:36 ` [PATCH v4 03/13] dt-bindings: remoteproc: qcom: " Sibi Sankar
2021-07-20  4:36 ` [PATCH v4 04/13] remoteproc: qcom: q6v5: Use qmp_send to update co-processor load state Sibi Sankar
2021-07-21  5:26   ` Stephen Boyd
2021-07-21 17:27     ` Sibi Sankar
2021-07-30 16:36   ` Bjorn Andersson
2021-07-20  4:36 ` [PATCH v4 05/13] arm64: dts: qcom: sc7180: Use QMP property to control " Sibi Sankar
2021-07-20  4:36 ` [PATCH v4 06/13] arm64: dts: qcom: sc7280: " Sibi Sankar
2021-07-20  4:36 ` [PATCH v4 07/13] arm64: dts: qcom: sdm845: " Sibi Sankar
2021-07-20  4:36 ` [PATCH v4 08/13] arm64: dts: qcom: sm8150: " Sibi Sankar
2021-07-20  4:36 ` [PATCH v4 09/13] arm64: dts: qcom: sm8250: " Sibi Sankar
2021-07-20  4:36 ` [PATCH v4 10/13] arm64: dts: qcom: sm8350: " Sibi Sankar
2021-07-20  4:36 ` [PATCH v4 11/13] soc: qcom: aoss: Drop power domain support Sibi Sankar
2021-07-20 22:53   ` Matthias Kaehlcke
2021-07-21  5:35   ` Stephen Boyd
2021-07-20  4:36 ` [PATCH v4 12/13] dt-bindings: msm/dp: Remove aoss-qmp header Sibi Sankar
2021-07-21  5:16   ` Stephen Boyd
2021-07-20  4:36 ` [PATCH v4 13/13] dt-bindings: soc: qcom: aoss: Delete unused power-domain definitions Sibi Sankar

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).