[PATCH v3 1/2] spi: move cs spi_delay to spi_device

[PATCH v3 1/2] spi: move cs spi_delay to spi_device

[Mason Zhang]

As we know, spi core layer has removed spi_set_cs_timing() API.
So this patch moved spi_delay for cs_timing from spi_controller
to spi_device, because cs timing should be set by spi_device but
not controller.

Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com>
---
 drivers/spi/spi.c       |  6 +++---
 include/linux/spi/spi.h | 20 +++++++++-----------
 2 files changed, 12 insertions(+), 14 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index c99181165321..5d68e6cd2a18 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -842,9 +842,9 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
 	if (spi->cs_gpiod || gpio_is_valid(spi->cs_gpio) ||
 	    !spi->controller->set_cs_timing) {
 		if (activate)
-			spi_delay_exec(&spi->controller->cs_setup, NULL);
+			spi_delay_exec(&spi->cs_setup, NULL);
 		else
-			spi_delay_exec(&spi->controller->cs_hold, NULL);
+			spi_delay_exec(&spi->cs_hold, NULL);
 	}
 
 	if (spi->mode & SPI_CS_HIGH)
@@ -887,7 +887,7 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
 	if (spi->cs_gpiod || gpio_is_valid(spi->cs_gpio) ||
 	    !spi->controller->set_cs_timing) {
 		if (!activate)
-			spi_delay_exec(&spi->controller->cs_inactive, NULL);
+			spi_delay_exec(&spi->cs_inactive, NULL);
 	}
 }
 
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 97b8d12b5f2b..651e19ba3415 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -147,7 +147,11 @@ extern int spi_delay_exec(struct spi_delay *_delay, struct spi_transfer *xfer);
  *	not using a GPIO line)
  * @word_delay: delay to be inserted between consecutive
  *	words of a transfer
- *
+ * @cs_setup: delay to be introduced by the controller after CS is asserted
+ * @cs_hold: delay to be introduced by the controller before CS is deasserted
+ * @cs_inactive: delay to be introduced by the controller after CS is
+ *	deasserted. If @cs_change_delay is used from @spi_transfer, then the
+ *	two delays will be added up.
  * @statistics: statistics for the spi_device
  *
  * A @spi_device is used to interchange data between an SPI slave
@@ -188,6 +192,10 @@ struct spi_device {
 	int			cs_gpio;	/* LEGACY: chip select gpio */
 	struct gpio_desc	*cs_gpiod;	/* chip select gpio desc */
 	struct spi_delay	word_delay; /* inter-word delay */
+	/* CS delays */
+	struct spi_delay	cs_setup;
+	struct spi_delay	cs_hold;
+	struct spi_delay	cs_inactive;
 
 	/* the statistics */
 	struct spi_statistics	statistics;
@@ -412,11 +420,6 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch
  *	     controller has native support for memory like operations.
  * @unprepare_message: undo any work done by prepare_message().
  * @slave_abort: abort the ongoing transfer request on an SPI slave controller
- * @cs_setup: delay to be introduced by the controller after CS is asserted
- * @cs_hold: delay to be introduced by the controller before CS is deasserted
- * @cs_inactive: delay to be introduced by the controller after CS is
- *	deasserted. If @cs_change_delay is used from @spi_transfer, then the
- *	two delays will be added up.
  * @cs_gpios: LEGACY: array of GPIO descs to use as chip select lines; one per
  *	CS number. Any individual value may be -ENOENT for CS lines that
  *	are not GPIOs (driven by the SPI controller itself). Use the cs_gpiods
@@ -638,11 +641,6 @@ struct spi_controller {
 	/* Optimized handlers for SPI memory-like operations. */
 	const struct spi_controller_mem_ops *mem_ops;
 
-	/* CS delays */
-	struct spi_delay	cs_setup;
-	struct spi_delay	cs_hold;
-	struct spi_delay	cs_inactive;
-
 	/* gpio chip select */
 	int			*cs_gpios;
 	struct gpio_desc	**cs_gpiods;
-- 
2.18.0

Re: [PATCH v3 1/2] spi: move cs spi_delay to spi_device

[Mark Brown]

On Wed, 4 Aug 2021 21:37:17 +0800, Mason Zhang wrote:
> As we know, spi core layer has removed spi_set_cs_timing() API.
> So this patch moved spi_delay for cs_timing from spi_controller
> to spi_device, because cs timing should be set by spi_device but
> not controller.
> 
> 
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[1/2] spi: move cs spi_delay to spi_device
      commit: 8c33ebfeeb597ea953df93f84ea25482d29c664f

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark