linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Zijun Hu <zijuhu@codeaurora.org>
To: marcel@holtmann.org, johan.hedberg@gmail.com, luiz.dentz@gmail.com
Cc: linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, bgodavar@codeaurora.org,
	c-hbandi@codeaurora.org, hemantg@codeaurora.org,
	mka@chromium.org, rjliao@codeaurora.org, zijuhu@codeaurora.org,
	tjiang@codeaurora.org
Subject: [PATCH v4] Bluetooth: btusb: Add support using different nvm for variant WCN6855 controller
Date: Mon, 23 Aug 2021 16:58:20 +0800	[thread overview]
Message-ID: <1629709100-9099-1-git-send-email-zijuhu@codeaurora.org> (raw)

From: Tim Jiang <tjiang@codeaurora.org>

we have variant wcn6855 soc chip from different vendors, so we should
use different nvm file with suffix to distinguish them.

Signed-off-by: Tim Jiang <tjiang@codeaurora.org>
---
 drivers/bluetooth/btusb.c | 46 ++++++++++++++++++++++++++++++++++++----------
 1 file changed, 36 insertions(+), 10 deletions(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 60d2fce59a71..9b4408307138 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3141,6 +3141,9 @@ static int btusb_set_bdaddr_wcn6855(struct hci_dev *hdev,
 #define QCA_DFU_TIMEOUT		3000
 #define QCA_FLAG_MULTI_NVM      0x80
 
+#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200
+#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211
+
 struct qca_version {
 	__le32	rom_version;
 	__le32	patch_version;
@@ -3172,6 +3175,7 @@ static const struct qca_device_info qca_devices_table[] = {
 	{ 0x00000302, 28, 4, 16 }, /* Rome 3.2 */
 	{ 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */
 	{ 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */
+	{ 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */
 };
 
 static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request,
@@ -3326,22 +3330,24 @@ static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev,
 	return err;
 }
 
-static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
-				    struct qca_version *ver,
-				    const struct qca_device_info *info)
+static void btusb_generate_qca_nvm_name(char **fwname,
+					int max_size,
+					struct qca_version *ver,
+					char *separator,
+					char *vendor)
 {
-	const struct firmware *fw;
-	char fwname[64];
-	int err;
-
 	if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
 		/* if boardid equal 0, use default nvm without surfix */
 		if (le16_to_cpu(ver->board_id) == 0x0) {
-			snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
-				 le32_to_cpu(ver->rom_version));
+			snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x%s%s.bin",
+				 le32_to_cpu(ver->rom_version),
+				 separator,
+				 vendor);
 		} else {
-			snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x_%04x.bin",
+			snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x%s%s%04x.bin",
 				le32_to_cpu(ver->rom_version),
+				separator,
+				vendor,
 				le16_to_cpu(ver->board_id));
 		}
 	} else {
@@ -3349,6 +3355,26 @@ static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
 			 le32_to_cpu(ver->rom_version));
 	}
 
+}
+
+static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
+				    struct qca_version *ver,
+				    const struct qca_device_info *info)
+{
+	const struct firmware *fw;
+	char fwname[64];
+	int err;
+
+	switch (ver->ram_version) {
+	case WCN6855_2_0_RAM_VERSION_GF:
+	case WCN6855_2_1_RAM_VERSION_GF:
+			btusb_generate_qca_nvm_name(&fwname, sizeof(fwname), ver, "_", "gf");
+		break;
+	default:
+			btusb_generate_qca_nvm_name(&fwname, sizeof(fwname), ver, NULL, NULL);
+		break;
+	}
+
 	err = request_firmware(&fw, fwname, &hdev->dev);
 	if (err) {
 		bt_dev_err(hdev, "failed to request NVM file: %s (%d)",
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project


             reply	other threads:[~2021-08-23  8:58 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-23  8:58 Zijun Hu [this message]
2021-08-23 13:58 ` [PATCH v4] Bluetooth: btusb: Add support using different nvm for variant WCN6855 controller kernel test robot
2021-08-23 15:25 ` kernel test robot
2021-08-23 17:43 ` Matthias Kaehlcke

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1629709100-9099-1-git-send-email-zijuhu@codeaurora.org \
    --to=zijuhu@codeaurora.org \
    --cc=bgodavar@codeaurora.org \
    --cc=c-hbandi@codeaurora.org \
    --cc=hemantg@codeaurora.org \
    --cc=johan.hedberg@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luiz.dentz@gmail.com \
    --cc=marcel@holtmann.org \
    --cc=mka@chromium.org \
    --cc=rjliao@codeaurora.org \
    --cc=tjiang@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).