From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.8 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id C36ADC43214 for ; Fri, 27 Aug 2021 21:11:35 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id AB8A660EE7 for ; Fri, 27 Aug 2021 21:11:35 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231889AbhH0VMX (ORCPT ); Fri, 27 Aug 2021 17:12:23 -0400 Received: from m43-7.mailgun.net ([69.72.43.7]:51154 "EHLO m43-7.mailgun.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231858AbhH0VMW (ORCPT ); Fri, 27 Aug 2021 17:12:22 -0400 DKIM-Signature: a=rsa-sha256; v=1; c=relaxed/relaxed; d=mg.codeaurora.org; q=dns/txt; s=smtp; t=1630098693; h=Message-Id: Date: Subject: Cc: To: From: Sender; bh=LDAlhOovU1pCsnAF73lo+H2/9n+lPdFdscbNgyJUYIU=; b=NqmYLRp1DON3vfCbw2wFTLGFAfDXIBvxCF666/mjQkUy+HD1nn6YyM56XDmauZfA/Cyv0e1q XJb8NOe6djPT71zChDxi4PZdWMe6quBsjoilX+ZGsEGBewDAGR33slEmCdYc8IB2swgd5o2f 1ZlCfgo0wUAzek11Rq5sIOeJNy4= X-Mailgun-Sending-Ip: 69.72.43.7 X-Mailgun-Sid: WyI0MWYwYSIsICJsaW51eC1rZXJuZWxAdmdlci5rZXJuZWwub3JnIiwgImJlOWU0YSJd Received: from smtp.codeaurora.org (ec2-35-166-182-171.us-west-2.compute.amazonaws.com [35.166.182.171]) by smtp-out-n06.prod.us-west-2.postgun.com with SMTP id 612954eb4d644b7d1c7a5f39 (version=TLS1.2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256); Fri, 27 Aug 2021 21:11:07 GMT Sender: khsieh=codeaurora.org@mg.codeaurora.org Received: by smtp.codeaurora.org (Postfix, from userid 1001) id 5F9C3C4360D; Fri, 27 Aug 2021 21:11:07 +0000 (UTC) Received: from khsieh-linux1.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-SHA256 (128/128 bits)) (No client certificate requested) (Authenticated sender: khsieh) by smtp.codeaurora.org (Postfix) with ESMTPSA id D5E66C4338F; Fri, 27 Aug 2021 21:11:04 +0000 (UTC) DMARC-Filter: OpenDMARC Filter v1.4.1 smtp.codeaurora.org D5E66C4338F Authentication-Results: aws-us-west-2-caf-mail-1.web.codeaurora.org; dmarc=none (p=none dis=none) header.from=codeaurora.org Authentication-Results: aws-us-west-2-caf-mail-1.web.codeaurora.org; spf=fail smtp.mailfrom=codeaurora.org From: Kuogee Hsieh To: robdclark@gmail.com, sean@poorly.run, swboyd@chromium.org, vkoul@kernel.org, agross@kernel.org, bjorn.andersson@linaro.org, robh+dt@kernel.org, devicetree@vger.kernel.org Cc: abhinavk@codeaurora.org, aravindh@codeaurora.org, khsieh@codeaurora.org, freedreno@lists.freedesktop.org, linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, kishon@ti.com, p.zabel@pengutronix.de Subject: [PATCH v2] phy: qcom-qmp: add support for display port voltage and pre-emphasis swing Date: Fri, 27 Aug 2021 14:10:58 -0700 Message-Id: <1630098658-23149-1-git-send-email-khsieh@codeaurora.org> X-Mailer: git-send-email 2.7.4 Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Both voltage and pre-emphasis swing level are set during link training negotiation between host and sink. There are totally four tables added. A voltage swing table for both hbr and hbr1, a voltage table for both hbr2 and hbr3, a pre-emphasis table for both hbr and hbr1 and a pre-emphasis table for both hbr2 and hbr3. In addition, write 0x0a to TX_TX_POL_INV is added to complete the sequence of configure dp phy base on HPG. Chnages in v2: -- revise commit test -- add Fixes tag -- replaced voltage_swing_cfg with voltage -- replaced pre_emphasis_cfg with emphasis -- delete drv_lvl_reg and emp_post_reg parameters from qcom_qmp_v4_phy_configure_dp_swing() -- delete drv_lvl_reg and emp_post_reg parameters from qcom_qmp_phy_configure_dp_swing() Fixes: aff188feb5e1 ("phy: qcom-qmp: add support for sm8250-usb3-dp phy") Signed-off-by: Kuogee Hsieh --- drivers/phy/qualcomm/phy-qcom-qmp.c | 117 ++++++++++++++++++++++++++---------- 1 file changed, 85 insertions(+), 32 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c index 31036aa..021cbb0 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -3546,12 +3546,11 @@ static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = { { 0x1f, 0xff, 0xff, 0xff } }; -static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy, - unsigned int drv_lvl_reg, unsigned int emp_post_reg) +static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy) { const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; unsigned int v_level = 0, p_level = 0; - u8 voltage_swing_cfg, pre_emphasis_cfg; + u8 voltage, emphasis; int i; for (i = 0; i < dp_opts->lanes; i++) { @@ -3560,26 +3559,25 @@ static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy, } if (dp_opts->link_rate <= 2700) { - voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level]; - pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level]; + voltage = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level]; + emphasis = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level]; } else { - voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr3_hbr2[v_level][p_level]; - pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr3_hbr2[v_level][p_level]; + voltage = qmp_dp_v3_voltage_swing_hbr3_hbr2[v_level][p_level]; + emphasis = qmp_dp_v3_pre_emphasis_hbr3_hbr2[v_level][p_level]; } /* TODO: Move check to config check */ - if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF) + if (voltage == 0xFF && emphasis == 0xFF) return -EINVAL; /* Enable MUX to use Cursor values from these registers */ - voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN; - pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN; - - writel(voltage_swing_cfg, qphy->tx + drv_lvl_reg); - writel(pre_emphasis_cfg, qphy->tx + emp_post_reg); - writel(voltage_swing_cfg, qphy->tx2 + drv_lvl_reg); - writel(pre_emphasis_cfg, qphy->tx2 + emp_post_reg); + voltage |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN; + emphasis |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN; + writel(voltage, qphy->tx + QSERDES_V3_TX_TX_DRV_LVL); + writel(emphasis, qphy->tx + QSERDES_V3_TX_TX_EMP_POST1_LVL); + writel(voltage, qphy->tx2 + QSERDES_V3_TX_TX_DRV_LVL); + writel(emphasis, qphy->tx2 + QSERDES_V3_TX_TX_EMP_POST1_LVL); return 0; } @@ -3588,9 +3586,7 @@ static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy) const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; u32 bias_en, drvr_en; - if (qcom_qmp_phy_configure_dp_swing(qphy, - QSERDES_V3_TX_TX_DRV_LVL, - QSERDES_V3_TX_TX_EMP_POST1_LVL) < 0) + if (qcom_qmp_phy_configure_dp_swing(qphy) < 0) return; if (dp_opts->lanes == 1) { @@ -3728,6 +3724,71 @@ static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy) return 0; } +/* The values in these tables are given without MUX_EN (0x20) bit set */ +static const u8 qmp_dp_v4_pre_emphasis_hbr3_hbr2[4][4] = { + { 0x00, 0x0c, 0x15, 0x1b }, + { 0x02, 0x0e, 0x16, 0xff }, + { 0x02, 0x11, 0xff, 0xff }, + { 0x04, 0xff, 0xff, 0xff } +}; + +static const u8 qmp_dp_v4_voltage_swing_hbr3_hbr2[4][4] = { + { 0x02, 0x12, 0x16, 0x1a }, + { 0x09, 0x19, 0x1f, 0xff }, + { 0x10, 0x1f, 0xff, 0xff }, + { 0x1f, 0xff, 0xff, 0xff } +}; + +static const u8 qmp_dp_v4_pre_emphasis_hbr_rbr[4][4] = { + { 0x00, 0x0e, 0x15, 0x1b }, + { 0x00, 0x0e, 0x15, 0xff }, + { 0x00, 0x0e, 0xff, 0xff }, + { 0x04, 0xff, 0xff, 0xff } +}; + +static const u8 qmp_dp_v4_voltage_swing_hbr_rbr[4][4] = { + { 0x08, 0x0f, 0x16, 0x1f }, + { 0x11, 0x1e, 0x1f, 0xff }, + { 0x16, 0x1f, 0xff, 0xff }, + { 0x1f, 0xff, 0xff, 0xff } +}; + +static int qcom_qmp_v4_phy_configure_dp_swing(struct qmp_phy *qphy) +{ + const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts; + unsigned int v_level = 0, p_level = 0; + u8 voltage, emphasis; + int i; + + for (i = 0; i < dp_opts->lanes; i++) { + v_level = max(v_level, dp_opts->voltage[i]); + p_level = max(p_level, dp_opts->pre[i]); + } + + if (dp_opts->link_rate <= 2700) { + voltage = qmp_dp_v4_voltage_swing_hbr_rbr[v_level][p_level]; + emphasis = qmp_dp_v4_pre_emphasis_hbr_rbr[v_level][p_level]; + } else { + voltage = qmp_dp_v4_voltage_swing_hbr3_hbr2[v_level][p_level]; + emphasis = qmp_dp_v4_pre_emphasis_hbr3_hbr2[v_level][p_level]; + } + + /* TODO: Move check to config check */ + if (voltage == 0xFF && emphasis == 0xFF) + return -EINVAL; + + /* Enable MUX to use Cursor values from these registers */ + voltage |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN; + emphasis |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN; + + writel(voltage, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL); + writel(emphasis, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL); + writel(voltage, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL); + writel(emphasis, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL); + + return 0; +} + static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy) { writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN | @@ -3757,16 +3818,7 @@ static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy) static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy) { - /* Program default values before writing proper values */ - writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL); - writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL); - - writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL); - writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL); - - qcom_qmp_phy_configure_dp_swing(qphy, - QSERDES_V4_TX_TX_DRV_LVL, - QSERDES_V4_TX_TX_EMP_POST1_LVL); + qcom_qmp_v4_phy_configure_dp_swing(qphy); } static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy) @@ -3885,6 +3937,9 @@ static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy) writel(drvr1_en, qphy->tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN); writel(bias1_en, qphy->tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN); + writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV); + writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV); + writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG); udelay(2000); writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG); @@ -3896,11 +3951,9 @@ static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy) 10000)) return -ETIMEDOUT; - writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV); - writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV); - writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL); - writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL); + writel(0x22, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL); + writel(0x22, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL); writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL); writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL); -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project