From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-16.7 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 921EBC433F5 for ; Fri, 3 Sep 2021 04:29:53 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 762AD60EBA for ; Fri, 3 Sep 2021 04:29:53 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232562AbhICEas (ORCPT ); Fri, 3 Sep 2021 00:30:48 -0400 Received: from alexa-out.qualcomm.com ([129.46.98.28]:47062 "EHLO alexa-out.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229561AbhICEak (ORCPT ); Fri, 3 Sep 2021 00:30:40 -0400 Received: from ironmsg08-lv.qualcomm.com ([10.47.202.152]) by alexa-out.qualcomm.com with ESMTP; 02 Sep 2021 21:29:36 -0700 X-QCInternal: smtphost Received: from ironmsg01-blr.qualcomm.com ([10.86.208.130]) by ironmsg08-lv.qualcomm.com with ESMTP/TLS/AES256-SHA; 02 Sep 2021 21:29:34 -0700 X-QCInternal: smtphost Received: from rajpat-linux.qualcomm.com ([10.206.21.0]) by ironmsg01-blr.qualcomm.com with ESMTP; 03 Sep 2021 09:59:16 +0530 Received: by rajpat-linux.qualcomm.com (Postfix, from userid 2344945) id 5122821442; Fri, 3 Sep 2021 09:59:15 +0530 (IST) From: Rajesh Patil To: Andy Gross , Bjorn Andersson , Rob Herring Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, rnayak@codeaurora.org, saiprakash.ranjan@codeaurora.org, msavaliy@qti.qualcomm.com, skakit@codeaurora.org, sboyd@kernel.org, mka@chromium.org, dianders@chromium.org, Roja Rani Yarubandi , Rajesh Patil Subject: [PATCH V7 3/7] arm64: dts: sc7280: Add QUPv3 wrapper_0 nodes Date: Fri, 3 Sep 2021 09:58:56 +0530 Message-Id: <1630643340-10373-4-git-send-email-rajpat@codeaurora.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1630643340-10373-1-git-send-email-rajpat@codeaurora.org> References: <1630643340-10373-1-git-send-email-rajpat@codeaurora.org> Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Roja Rani Yarubandi Add QUPv3 wrapper_0 DT nodes for SC7280 SoC. Signed-off-by: Roja Rani Yarubandi Signed-off-by: Rajesh Patil --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 684 ++++++++++++++++++++++++++++++++++- 1 file changed, 682 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 7ec9871..5c6a1d7 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -536,24 +536,444 @@ qupv3_id_0: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x009c0000 0 0x2000>; - clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; #address-cells = <2>; #size-cells = <2>; ranges; + iommus = <&apps_smmu 0x123 0x0>; status = "disabled"; + qup_opp_table: qup-opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00980000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c0_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00980000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart0: serial@980000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00980000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart0_cts>, <&qup_uart0_rts>, <&qup_uart0_tx>, <&qup_uart0_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00984000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00984000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart1: serial@984000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00984000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart1_cts>, <&qup_uart1_rts>, <&qup_uart1_tx>, <&qup_uart1_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart2: serial@988000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>, <&qup_uart2_tx>, <&qup_uart2_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0098c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0098c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart3: serial@98c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0098c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart3_cts>, <&qup_uart3_rts>, <&qup_uart3_tx>, <&qup_uart3_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00990000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00990000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart4: serial@990000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00990000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>, <&qup_uart4_tx>, <&qup_uart4_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00994000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00994000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + uart5: serial@994000 { compatible = "qcom,geni-debug-uart"; reg = <0 0x00994000 0 0x4000>; - clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; pinctrl-names = "default"; pinctrl-0 = <&qup_uart5_default>; interrupts = ; status = "disabled"; }; + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00998000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00998000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart6: serial@998000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00998000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>, <&qup_uart6_tx>, <&qup_uart6_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c7: i2c@99c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0099c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi7: spi@99c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0099c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart7: serial@99c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0099c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart7_cts>, <&qup_uart7_rts>, <&qup_uart7_tx>, <&qup_uart7_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; }; cnoc2: interconnect@1500000 { @@ -1574,11 +1994,271 @@ function = "qspi_data"; }; + qup_i2c0_data_clk: qup-i2c0-data-clk { + pins = "gpio0", "gpio1"; + function = "qup00"; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk { + pins = "gpio4", "gpio5"; + function = "qup01"; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk { + pins = "gpio8", "gpio9"; + function = "qup02"; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk { + pins = "gpio12", "gpio13"; + function = "qup03"; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk { + pins = "gpio16", "gpio17"; + function = "qup04"; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk { + pins = "gpio20", "gpio21"; + function = "qup05"; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk { + pins = "gpio24", "gpio25"; + function = "qup06"; + }; + + qup_i2c7_data_clk: qup-i2c7-data-clk { + pins = "gpio28", "gpio29"; + function = "qup07"; + }; + + qup_spi0_data_clk: qup-spi0-data-clk { + pins = "gpio0", "gpio1", "gpio2"; + function = "qup00"; + }; + + qup_spi0_cs: qup-spi0-cs { + pins = "gpio3"; + function = "qup00"; + }; + + qup_spi1_data_clk: qup-spi1-data-clk { + pins = "gpio4", "gpio5", "gpio6"; + function = "qup01"; + }; + + qup_spi1_cs: qup-spi1-cs { + pins = "gpio7"; + function = "qup01"; + }; + + qup_spi2_data_clk: qup-spi2-data-clk { + pins = "gpio8", "gpio9", "gpio10"; + function = "qup02"; + }; + + qup_spi2_cs: qup-spi2-cs { + pins = "gpio11"; + function = "qup02"; + }; + + qup_spi3_data_clk: qup-spi3-data-clk { + pins = "gpio12", "gpio13", "gpio14"; + function = "qup03"; + }; + + qup_spi3_cs: qup-spi3-cs { + pins = "gpio15"; + function = "qup03"; + }; + + qup_spi4_data_clk: qup-spi4-data-clk { + pins = "gpio16", "gpio17", "gpio18"; + function = "qup04"; + }; + + qup_spi4_cs: qup-spi4-cs { + pins = "gpio19"; + function = "qup04"; + }; + + qup_spi5_data_clk: qup-spi5-data-clk { + pins = "gpio20", "gpio21", "gpio22"; + function = "qup05"; + }; + + qup_spi5_cs: qup-spi5-cs { + pins = "gpio23"; + function = "qup05"; + }; + + qup_spi6_data_clk: qup-spi6-data-clk { + pins = "gpio24", "gpio25", "gpio26"; + function = "qup06"; + }; + + qup_spi6_cs: qup-spi6-cs { + pins = "gpio27"; + function = "qup06"; + }; + + qup_spi7_data_clk: qup-spi7-data-clk { + pins = "gpio28", "gpio29", "gpio30"; + function = "qup07"; + }; + + qup_spi7_cs: qup-spi7-cs { + pins = "gpio31"; + function = "qup07"; + }; + + qup_uart0_cts: qup-uart0-cts { + pins = "gpio0"; + function = "qup00"; + }; + + qup_uart0_rts: qup-uart0-rts { + pins = "gpio1"; + function = "qup00"; + }; + + qup_uart0_tx: qup-uart0-tx { + pins = "gpio2"; + function = "qup00"; + }; + + qup_uart0_rx: qup-uart0-rx { + pins = "gpio3"; + function = "qup00"; + }; + + qup_uart1_cts: qup-uart1-cts { + pins = "gpio4"; + function = "qup01"; + }; + + qup_uart1_rts: qup-uart1-rts { + pins = "gpio5"; + function = "qup01"; + }; + + qup_uart1_tx: qup-uart1-tx { + pins = "gpio6"; + function = "qup01"; + }; + + qup_uart1_rx: qup-uart1-rx { + pins = "gpio7"; + function = "qup01"; + }; + + qup_uart2_cts: qup-uart2-cts { + pins = "gpio8"; + function = "qup02"; + }; + + qup_uart2_rts: qup-uart2-rts { + pins = "gpio9"; + function = "qup02"; + }; + + qup_uart2_tx: qup-uart2-tx { + pins = "gpio10"; + function = "qup02"; + }; + + qup_uart2_rx: qup-uart2-rx { + pins = "gpio11"; + function = "qup02"; + }; + + qup_uart3_cts: qup-uart3-cts { + pins = "gpio12"; + function = "qup03"; + }; + + qup_uart3_rts: qup-uart3-rts { + pins = "gpio13"; + function = "qup03"; + }; + + qup_uart3_tx: qup-uart3-tx { + pins = "gpio14"; + function = "qup03"; + }; + + qup_uart3_rx: qup-uart3-rx { + pins = "gpio15"; + function = "qup03"; + }; + + qup_uart4_cts: qup-uart4-cts { + pins = "gpio16"; + function = "qup04"; + }; + + qup_uart4_rts: qup-uart4-rts { + pins = "gpio17"; + function = "qup04"; + }; + + qup_uart4_tx: qup-uart4-tx { + pins = "gpio18"; + function = "qup04"; + }; + + qup_uart4_rx: qup-uart4-rx { + pins = "gpio19"; + function = "qup04"; + }; + qup_uart5_default: qup-uart5-default { pins = "gpio46", "gpio47"; function = "qup13"; }; + qup_uart6_cts: qup-uart6-cts { + pins = "gpio24"; + function = "qup06"; + }; + + qup_uart6_rts: qup-uart6-rts { + pins = "gpio25"; + function = "qup06"; + }; + + qup_uart6_tx: qup-uart6-tx { + pins = "gpio26"; + function = "qup06"; + }; + + qup_uart6_rx: qup-uart6-rx { + pins = "gpio27"; + function = "qup06"; + }; + + qup_uart7_cts: qup-uart7-cts { + pins = "gpio28"; + function = "qup07"; + }; + + qup_uart7_rts: qup-uart7-rts { + pins = "gpio29"; + function = "qup07"; + }; + + qup_uart7_tx: qup-uart7-tx { + pins = "gpio30"; + function = "qup07"; + }; + + qup_uart7_rx: qup-uart7-rx { + pins = "gpio31"; + function = "qup07"; + }; + sdc1_on: sdc1-on { clk { pins = "sdc1_clk"; -- QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation