* Linux 5.13.15
@ 2021-09-08 7:06 Greg Kroah-Hartman
2021-09-08 7:06 ` Greg Kroah-Hartman
0 siblings, 1 reply; 2+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-08 7:06 UTC (permalink / raw)
To: linux-kernel, akpm, torvalds, stable; +Cc: lwn, jslaby, Greg Kroah-Hartman
I'm announcing the release of the 5.13.15 kernel.
All users of the 5.13 kernel series must upgrade.
The updated 5.13.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-5.13.y
and can be browsed at the normal kernel.org git web browser:
https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary
thanks,
greg k-h
------------
Makefile | 2
arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts | 4 +
arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi | 2
arch/x86/events/amd/ibs.c | 8 +++
arch/x86/events/amd/power.c | 1
arch/x86/events/intel/pt.c | 2
arch/xtensa/Kconfig | 2
drivers/block/Kconfig | 4 -
drivers/block/cryptoloop.c | 2
drivers/gpu/ipu-v3/ipu-cpmem.c | 30 ++++++------
drivers/media/usb/stkwebcam/stk-webcam.c | 6 +-
drivers/net/dsa/mv88e6xxx/serdes.c | 11 ++--
drivers/net/ethernet/cadence/macb_ptp.c | 11 ++++
drivers/net/ethernet/qlogic/qed/qed_main.c | 7 ++
drivers/net/ethernet/qlogic/qede/qede_main.c | 2
drivers/reset/reset-zynqmp.c | 3 -
drivers/usb/serial/cp210x.c | 21 +++++---
drivers/usb/serial/pl2303.c | 1
fs/ceph/mdsmap.c | 8 ++-
fs/ext4/inline.c | 6 ++
fs/ext4/super.c | 8 +++
sound/core/pcm_lib.c | 2
sound/pci/hda/patch_realtek.c | 11 ++++
sound/usb/endpoint.c | 5 ++
24 files changed, 115 insertions(+), 44 deletions(-)
Bin Meng (2):
riscv: dts: microchip: Use 'local-mac-address' for emac1
riscv: dts: microchip: Add ethernet0 to the aliases node
Christoph Hellwig (1):
cryptoloop: add a deprecation warning
Greg Kroah-Hartman (1):
Linux 5.13.15
Harini Katakam (1):
net: macb: Add a NULL check on desc_ptp
Jan Kara (1):
ext4: fix e2fsprogs checksum failure for mounted filesystem
Johan Hovold (2):
USB: serial: cp210x: fix control-characters error handling
USB: serial: cp210x: fix flow-control error handling
Johnathon Clark (1):
ALSA: hda/realtek: Quirk for HP Spectre x360 14 amp setup
Kim Phillips (2):
perf/x86/amd/ibs: Work around erratum #1197
perf/x86/amd/power: Assign pmu.module
Krzysztof Hałasa (1):
gpu: ipu-v3: Fix i.MX IPU-v3 offset calculations for (semi)planar U/V formats
Nathan Rossi (1):
net: dsa: mv88e6xxx: Update mv88e6393x serdes errata
Pavel Skripkin (1):
media: stkwebcam: fix memory leak in stk_camera_probe
Randy Dunlap (1):
xtensa: fix kconfig unmet dependency warning for HAVE_FUTEX_CMPXCHG
Robert Marko (1):
USB: serial: pl2303: fix GL type detection
Sai Krishna Potthuri (1):
reset: reset-zynqmp: Fixed the argument data type
Shai Malin (2):
qed: Fix the VF msix vectors flow
qede: Fix memset corruption
Takashi Iwai (2):
ALSA: usb-audio: Fix regression on Sony WALKMAN NW-A45 DAC
ALSA: hda/realtek: Workaround for conflicting SSID on ASUS ROG Strix G17
Theodore Ts'o (1):
ext4: fix race writing to an inline_data file while its xattrs are changing
Tuo Li (1):
ceph: fix possible null-pointer dereference in ceph_mdsmap_decode()
Xiaoyao Li (1):
perf/x86/intel/pt: Fix mask of num_address_ranges
Zubin Mithra (1):
ALSA: pcm: fix divide error in snd_pcm_lib_ioctl
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Linux 5.13.15
2021-09-08 7:06 Linux 5.13.15 Greg Kroah-Hartman
@ 2021-09-08 7:06 ` Greg Kroah-Hartman
0 siblings, 0 replies; 2+ messages in thread
From: Greg Kroah-Hartman @ 2021-09-08 7:06 UTC (permalink / raw)
To: linux-kernel, akpm, torvalds, stable; +Cc: lwn, jslaby, Greg Kroah-Hartman
diff --git a/Makefile b/Makefile
index de1f9c79e27a..d0ea05957da6 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
VERSION = 5
PATCHLEVEL = 13
-SUBLEVEL = 14
+SUBLEVEL = 15
EXTRAVERSION =
NAME = Opossums on Parade
diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
index ec79944065c9..baea7d204639 100644
--- a/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
+++ b/arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts
@@ -14,6 +14,10 @@ / {
model = "Microchip PolarFire-SoC Icicle Kit";
compatible = "microchip,mpfs-icicle-kit";
+ aliases {
+ ethernet0 = &emac1;
+ };
+
chosen {
stdout-path = &serial0;
};
diff --git a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
index b9819570a7d1..9d2fbbc1f777 100644
--- a/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
+++ b/arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi
@@ -317,7 +317,7 @@ emac1: ethernet@20112000 {
reg = <0x0 0x20112000 0x0 0x2000>;
interrupt-parent = <&plic>;
interrupts = <70 71 72 73>;
- mac-address = [00 00 00 00 00 00];
+ local-mac-address = [00 00 00 00 00 00];
clocks = <&clkcfg 5>, <&clkcfg 2>;
status = "disabled";
clock-names = "pclk", "hclk";
diff --git a/arch/x86/events/amd/ibs.c b/arch/x86/events/amd/ibs.c
index 40669eac9d6d..921f47b9bb24 100644
--- a/arch/x86/events/amd/ibs.c
+++ b/arch/x86/events/amd/ibs.c
@@ -90,6 +90,7 @@ struct perf_ibs {
unsigned long offset_mask[1];
int offset_max;
unsigned int fetch_count_reset_broken : 1;
+ unsigned int fetch_ignore_if_zero_rip : 1;
struct cpu_perf_ibs __percpu *pcpu;
struct attribute **format_attrs;
@@ -672,6 +673,10 @@ static int perf_ibs_handle_irq(struct perf_ibs *perf_ibs, struct pt_regs *iregs)
if (check_rip && (ibs_data.regs[2] & IBS_RIP_INVALID)) {
regs.flags &= ~PERF_EFLAGS_EXACT;
} else {
+ /* Workaround for erratum #1197 */
+ if (perf_ibs->fetch_ignore_if_zero_rip && !(ibs_data.regs[1]))
+ goto out;
+
set_linear_ip(®s, ibs_data.regs[1]);
regs.flags |= PERF_EFLAGS_EXACT;
}
@@ -769,6 +774,9 @@ static __init void perf_event_ibs_init(void)
if (boot_cpu_data.x86 >= 0x16 && boot_cpu_data.x86 <= 0x18)
perf_ibs_fetch.fetch_count_reset_broken = 1;
+ if (boot_cpu_data.x86 == 0x19 && boot_cpu_data.x86_model < 0x10)
+ perf_ibs_fetch.fetch_ignore_if_zero_rip = 1;
+
perf_ibs_pmu_init(&perf_ibs_fetch, "ibs_fetch");
if (ibs_caps & IBS_CAPS_OPCNT) {
diff --git a/arch/x86/events/amd/power.c b/arch/x86/events/amd/power.c
index 16a2369c586e..37d5b380516e 100644
--- a/arch/x86/events/amd/power.c
+++ b/arch/x86/events/amd/power.c
@@ -213,6 +213,7 @@ static struct pmu pmu_class = {
.stop = pmu_event_stop,
.read = pmu_event_read,
.capabilities = PERF_PMU_CAP_NO_EXCLUDE,
+ .module = THIS_MODULE,
};
static int power_cpu_exit(unsigned int cpu)
diff --git a/arch/x86/events/intel/pt.c b/arch/x86/events/intel/pt.c
index 915847655c06..b044577785bb 100644
--- a/arch/x86/events/intel/pt.c
+++ b/arch/x86/events/intel/pt.c
@@ -62,7 +62,7 @@ static struct pt_cap_desc {
PT_CAP(single_range_output, 0, CPUID_ECX, BIT(2)),
PT_CAP(output_subsys, 0, CPUID_ECX, BIT(3)),
PT_CAP(payloads_lip, 0, CPUID_ECX, BIT(31)),
- PT_CAP(num_address_ranges, 1, CPUID_EAX, 0x3),
+ PT_CAP(num_address_ranges, 1, CPUID_EAX, 0x7),
PT_CAP(mtc_periods, 1, CPUID_EAX, 0xffff0000),
PT_CAP(cycle_thresholds, 1, CPUID_EBX, 0xffff),
PT_CAP(psb_periods, 1, CPUID_EBX, 0xffff0000),
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 2332b2156993..1bdb55c2d0c1 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -30,7 +30,7 @@ config XTENSA
select HAVE_DMA_CONTIGUOUS
select HAVE_EXIT_THREAD
select HAVE_FUNCTION_TRACER
- select HAVE_FUTEX_CMPXCHG if !MMU
+ select HAVE_FUTEX_CMPXCHG if !MMU && FUTEX
select HAVE_HW_BREAKPOINT if PERF_EVENTS
select HAVE_IRQ_TIME_ACCOUNTING
select HAVE_PCI
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 63056cfd4b62..fbb3a558139f 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -213,7 +213,7 @@ config BLK_DEV_LOOP_MIN_COUNT
dynamically allocated with the /dev/loop-control interface.
config BLK_DEV_CRYPTOLOOP
- tristate "Cryptoloop Support"
+ tristate "Cryptoloop Support (DEPRECATED)"
select CRYPTO
select CRYPTO_CBC
depends on BLK_DEV_LOOP
@@ -225,7 +225,7 @@ config BLK_DEV_CRYPTOLOOP
WARNING: This device is not safe for journaled file systems like
ext3 or Reiserfs. Please use the Device Mapper crypto module
instead, which can be configured to be on-disk compatible with the
- cryptoloop device.
+ cryptoloop device. cryptoloop support will be removed in Linux 5.16.
source "drivers/block/drbd/Kconfig"
diff --git a/drivers/block/cryptoloop.c b/drivers/block/cryptoloop.c
index 3cabc335ae74..f0a91faa43a8 100644
--- a/drivers/block/cryptoloop.c
+++ b/drivers/block/cryptoloop.c
@@ -189,6 +189,8 @@ init_cryptoloop(void)
if (rc)
printk(KERN_ERR "cryptoloop: loop_register_transfer failed\n");
+ else
+ pr_warn("the cryptoloop driver has been deprecated and will be removed in in Linux 5.16\n");
return rc;
}
diff --git a/drivers/gpu/ipu-v3/ipu-cpmem.c b/drivers/gpu/ipu-v3/ipu-cpmem.c
index a1c85d1521f5..82b244cb313e 100644
--- a/drivers/gpu/ipu-v3/ipu-cpmem.c
+++ b/drivers/gpu/ipu-v3/ipu-cpmem.c
@@ -585,21 +585,21 @@ static const struct ipu_rgb def_bgra_16 = {
.bits_per_pixel = 16,
};
-#define Y_OFFSET(pix, x, y) ((x) + pix->width * (y))
-#define U_OFFSET(pix, x, y) ((pix->width * pix->height) + \
- (pix->width * ((y) / 2) / 2) + (x) / 2)
-#define V_OFFSET(pix, x, y) ((pix->width * pix->height) + \
- (pix->width * pix->height / 4) + \
- (pix->width * ((y) / 2) / 2) + (x) / 2)
-#define U2_OFFSET(pix, x, y) ((pix->width * pix->height) + \
- (pix->width * (y) / 2) + (x) / 2)
-#define V2_OFFSET(pix, x, y) ((pix->width * pix->height) + \
- (pix->width * pix->height / 2) + \
- (pix->width * (y) / 2) + (x) / 2)
-#define UV_OFFSET(pix, x, y) ((pix->width * pix->height) + \
- (pix->width * ((y) / 2)) + (x))
-#define UV2_OFFSET(pix, x, y) ((pix->width * pix->height) + \
- (pix->width * y) + (x))
+#define Y_OFFSET(pix, x, y) ((x) + pix->bytesperline * (y))
+#define U_OFFSET(pix, x, y) ((pix->bytesperline * pix->height) + \
+ (pix->bytesperline * ((y) / 2) / 2) + (x) / 2)
+#define V_OFFSET(pix, x, y) ((pix->bytesperline * pix->height) + \
+ (pix->bytesperline * pix->height / 4) + \
+ (pix->bytesperline * ((y) / 2) / 2) + (x) / 2)
+#define U2_OFFSET(pix, x, y) ((pix->bytesperline * pix->height) + \
+ (pix->bytesperline * (y) / 2) + (x) / 2)
+#define V2_OFFSET(pix, x, y) ((pix->bytesperline * pix->height) + \
+ (pix->bytesperline * pix->height / 2) + \
+ (pix->bytesperline * (y) / 2) + (x) / 2)
+#define UV_OFFSET(pix, x, y) ((pix->bytesperline * pix->height) + \
+ (pix->bytesperline * ((y) / 2)) + (x))
+#define UV2_OFFSET(pix, x, y) ((pix->bytesperline * pix->height) + \
+ (pix->bytesperline * y) + (x))
#define NUM_ALPHA_CHANNELS 7
diff --git a/drivers/media/usb/stkwebcam/stk-webcam.c b/drivers/media/usb/stkwebcam/stk-webcam.c
index a45d464427c4..0e231e576dc3 100644
--- a/drivers/media/usb/stkwebcam/stk-webcam.c
+++ b/drivers/media/usb/stkwebcam/stk-webcam.c
@@ -1346,7 +1346,7 @@ static int stk_camera_probe(struct usb_interface *interface,
if (!dev->isoc_ep) {
pr_err("Could not find isoc-in endpoint\n");
err = -ENODEV;
- goto error;
+ goto error_put;
}
dev->vsettings.palette = V4L2_PIX_FMT_RGB565;
dev->vsettings.mode = MODE_VGA;
@@ -1359,10 +1359,12 @@ static int stk_camera_probe(struct usb_interface *interface,
err = stk_register_video_device(dev);
if (err)
- goto error;
+ goto error_put;
return 0;
+error_put:
+ usb_put_intf(interface);
error:
v4l2_ctrl_handler_free(hdl);
v4l2_device_unregister(&dev->v4l2_dev);
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.c b/drivers/net/dsa/mv88e6xxx/serdes.c
index b1d46dd8eaab..6ea003678798 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.c
+++ b/drivers/net/dsa/mv88e6xxx/serdes.c
@@ -1277,15 +1277,16 @@ static int mv88e6393x_serdes_port_errata(struct mv88e6xxx_chip *chip, int lane)
int err;
/* mv88e6393x family errata 4.6:
- * Cannot clear PwrDn bit on SERDES on port 0 if device is configured
- * CPU_MGD mode or P0_mode is configured for [x]MII.
- * Workaround: Set Port0 SERDES register 4.F002 bit 5=0 and bit 15=1.
+ * Cannot clear PwrDn bit on SERDES if device is configured CPU_MGD
+ * mode or P0_mode is configured for [x]MII.
+ * Workaround: Set SERDES register 4.F002 bit 5=0 and bit 15=1.
*
* It seems that after this workaround the SERDES is automatically
* powered up (the bit is cleared), so power it down.
*/
- if (lane == MV88E6393X_PORT0_LANE) {
- err = mv88e6390_serdes_read(chip, MV88E6393X_PORT0_LANE,
+ if (lane == MV88E6393X_PORT0_LANE || lane == MV88E6393X_PORT9_LANE ||
+ lane == MV88E6393X_PORT10_LANE) {
+ err = mv88e6390_serdes_read(chip, lane,
MDIO_MMD_PHYXS,
MV88E6393X_SERDES_POC, ®);
if (err)
diff --git a/drivers/net/ethernet/cadence/macb_ptp.c b/drivers/net/ethernet/cadence/macb_ptp.c
index 283918aeb741..09d64a29f56e 100644
--- a/drivers/net/ethernet/cadence/macb_ptp.c
+++ b/drivers/net/ethernet/cadence/macb_ptp.c
@@ -275,6 +275,12 @@ void gem_ptp_rxstamp(struct macb *bp, struct sk_buff *skb,
if (GEM_BFEXT(DMA_RXVALID, desc->addr)) {
desc_ptp = macb_ptp_desc(bp, desc);
+ /* Unlikely but check */
+ if (!desc_ptp) {
+ dev_warn_ratelimited(&bp->pdev->dev,
+ "Timestamp not supported in BD\n");
+ return;
+ }
gem_hw_timestamp(bp, desc_ptp->ts_1, desc_ptp->ts_2, &ts);
memset(shhwtstamps, 0, sizeof(struct skb_shared_hwtstamps));
shhwtstamps->hwtstamp = ktime_set(ts.tv_sec, ts.tv_nsec);
@@ -307,8 +313,11 @@ int gem_ptp_txstamp(struct macb_queue *queue, struct sk_buff *skb,
if (CIRC_SPACE(head, tail, PTP_TS_BUFFER_SIZE) == 0)
return -ENOMEM;
- skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
desc_ptp = macb_ptp_desc(queue->bp, desc);
+ /* Unlikely but check */
+ if (!desc_ptp)
+ return -EINVAL;
+ skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
tx_timestamp = &queue->tx_timestamps[head];
tx_timestamp->skb = skb;
/* ensure ts_1/ts_2 is loaded after ctrl (TX_USED check) */
diff --git a/drivers/net/ethernet/qlogic/qed/qed_main.c b/drivers/net/ethernet/qlogic/qed/qed_main.c
index 5bd58c65e163..6bb9ec98a12b 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_main.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_main.c
@@ -616,7 +616,12 @@ static int qed_enable_msix(struct qed_dev *cdev,
rc = cnt;
}
- if (rc > 0) {
+ /* For VFs, we should return with an error in case we didn't get the
+ * exact number of msix vectors as we requested.
+ * Not doing that will lead to a crash when starting queues for
+ * this VF.
+ */
+ if ((IS_PF(cdev) && rc > 0) || (IS_VF(cdev) && rc == cnt)) {
/* MSI-x configuration was achieved */
int_params->out.int_mode = QED_INT_MODE_MSIX;
int_params->out.num_vectors = rc;
diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c
index 7c6064baeba2..1c7f9ed6f1c1 100644
--- a/drivers/net/ethernet/qlogic/qede/qede_main.c
+++ b/drivers/net/ethernet/qlogic/qede/qede_main.c
@@ -1874,6 +1874,7 @@ static void qede_sync_free_irqs(struct qede_dev *edev)
}
edev->int_info.used_cnt = 0;
+ edev->int_info.msix_cnt = 0;
}
static int qede_req_msix_irqs(struct qede_dev *edev)
@@ -2427,7 +2428,6 @@ static int qede_load(struct qede_dev *edev, enum qede_load_mode mode,
goto out;
err4:
qede_sync_free_irqs(edev);
- memset(&edev->int_info.msix_cnt, 0, sizeof(struct qed_int_info));
err3:
qede_napi_disable_remove(edev);
err2:
diff --git a/drivers/reset/reset-zynqmp.c b/drivers/reset/reset-zynqmp.c
index ebd433fa09dd..8c51768e9a72 100644
--- a/drivers/reset/reset-zynqmp.c
+++ b/drivers/reset/reset-zynqmp.c
@@ -53,7 +53,8 @@ static int zynqmp_reset_status(struct reset_controller_dev *rcdev,
unsigned long id)
{
struct zynqmp_reset_data *priv = to_zynqmp_reset_data(rcdev);
- int val, err;
+ int err;
+ u32 val;
err = zynqmp_pm_reset_get_status(priv->data->reset_id + id, &val);
if (err)
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index ea2e2d925a96..737748529482 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -1110,10 +1110,8 @@ static int cp210x_set_chars(struct usb_serial_port *port,
kfree(dmabuf);
- if (result < 0) {
- dev_err(&port->dev, "failed to set special chars: %d\n", result);
+ if (result < 0)
return result;
- }
return 0;
}
@@ -1138,6 +1136,7 @@ static void cp210x_set_flow_control(struct tty_struct *tty,
struct cp210x_flow_ctl flow_ctl;
u32 flow_repl;
u32 ctl_hs;
+ bool crtscts;
int ret;
/*
@@ -1165,8 +1164,10 @@ static void cp210x_set_flow_control(struct tty_struct *tty,
chars.bXoffChar = STOP_CHAR(tty);
ret = cp210x_set_chars(port, &chars);
- if (ret)
- return;
+ if (ret) {
+ dev_err(&port->dev, "failed to set special chars: %d\n",
+ ret);
+ }
}
mutex_lock(&port_priv->mutex);
@@ -1195,14 +1196,14 @@ static void cp210x_set_flow_control(struct tty_struct *tty,
flow_repl |= CP210X_SERIAL_RTS_FLOW_CTL;
else
flow_repl |= CP210X_SERIAL_RTS_INACTIVE;
- port_priv->crtscts = true;
+ crtscts = true;
} else {
ctl_hs &= ~CP210X_SERIAL_CTS_HANDSHAKE;
if (port_priv->rts)
flow_repl |= CP210X_SERIAL_RTS_ACTIVE;
else
flow_repl |= CP210X_SERIAL_RTS_INACTIVE;
- port_priv->crtscts = false;
+ crtscts = false;
}
if (I_IXOFF(tty)) {
@@ -1225,8 +1226,12 @@ static void cp210x_set_flow_control(struct tty_struct *tty,
flow_ctl.ulControlHandshake = cpu_to_le32(ctl_hs);
flow_ctl.ulFlowReplace = cpu_to_le32(flow_repl);
- cp210x_write_reg_block(port, CP210X_SET_FLOW, &flow_ctl,
+ ret = cp210x_write_reg_block(port, CP210X_SET_FLOW, &flow_ctl,
sizeof(flow_ctl));
+ if (ret)
+ goto out_unlock;
+
+ port_priv->crtscts = crtscts;
out_unlock:
mutex_unlock(&port_priv->mutex);
}
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 2ce9cbf49e97..3b579966fe73 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -433,6 +433,7 @@ static int pl2303_detect_type(struct usb_serial *serial)
switch (bcdDevice) {
case 0x100:
case 0x305:
+ case 0x405:
/*
* Assume it's an HXN-type if the device doesn't
* support the old read request value.
diff --git a/fs/ceph/mdsmap.c b/fs/ceph/mdsmap.c
index abd9af7727ad..3c444b9cb17b 100644
--- a/fs/ceph/mdsmap.c
+++ b/fs/ceph/mdsmap.c
@@ -394,9 +394,11 @@ void ceph_mdsmap_destroy(struct ceph_mdsmap *m)
{
int i;
- for (i = 0; i < m->possible_max_rank; i++)
- kfree(m->m_info[i].export_targets);
- kfree(m->m_info);
+ if (m->m_info) {
+ for (i = 0; i < m->possible_max_rank; i++)
+ kfree(m->m_info[i].export_targets);
+ kfree(m->m_info);
+ }
kfree(m->m_data_pg_pools);
kfree(m);
}
diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index 3cf01629010d..0e85447022ae 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -750,6 +750,12 @@ int ext4_write_inline_data_end(struct inode *inode, loff_t pos, unsigned len,
ext4_write_lock_xattr(inode, &no_expand);
BUG_ON(!ext4_has_inline_data(inode));
+ /*
+ * ei->i_inline_off may have changed since ext4_write_begin()
+ * called ext4_try_to_write_inline_data()
+ */
+ (void) ext4_find_inline_data_nolock(inode);
+
kaddr = kmap_atomic(page);
ext4_write_inline_data(inode, &iloc, kaddr, pos, len);
kunmap_atomic(kaddr);
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 6a4e040ea9b3..079bb0f6b343 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -5051,6 +5051,14 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
err = percpu_counter_init(&sbi->s_freeinodes_counter, freei,
GFP_KERNEL);
}
+ /*
+ * Update the checksum after updating free space/inode
+ * counters. Otherwise the superblock can have an incorrect
+ * checksum in the buffer cache until it is written out and
+ * e2fsprogs programs trying to open a file system immediately
+ * after it is mounted can fail.
+ */
+ ext4_superblock_csum_set(sb);
if (!err)
err = percpu_counter_init(&sbi->s_dirs_counter,
ext4_count_dirs(sb), GFP_KERNEL);
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index b7e3d8f44511..23c58b62a58a 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -1746,7 +1746,7 @@ static int snd_pcm_lib_ioctl_fifo_size(struct snd_pcm_substream *substream,
channels = params_channels(params);
frame_size = snd_pcm_format_size(format, channels);
if (frame_size > 0)
- params->fifo_size /= (unsigned)frame_size;
+ params->fifo_size /= frame_size;
}
return 0;
}
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 0c6be8509855..82191d8f3d21 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8378,6 +8378,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x103c, 0x87f2, "HP ProBook 640 G8 Notebook PC", ALC236_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x87f4, "HP", ALC287_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x87f5, "HP", ALC287_FIXUP_HP_GPIO_LED),
+ SND_PCI_QUIRK(0x103c, 0x87f6, "HP Spectre x360 14", ALC245_FIXUP_HP_X360_AMP),
SND_PCI_QUIRK(0x103c, 0x87f7, "HP Spectre x360 14", ALC245_FIXUP_HP_X360_AMP),
SND_PCI_QUIRK(0x103c, 0x8805, "HP ProBook 650 G8 Notebook PC", ALC236_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x880d, "HP EliteBook 830 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED),
@@ -9456,6 +9457,16 @@ static int patch_alc269(struct hda_codec *codec)
snd_hda_pick_fixup(codec, alc269_fixup_models,
alc269_fixup_tbl, alc269_fixups);
+ /* FIXME: both TX300 and ROG Strix G17 have the same SSID, and
+ * the quirk breaks the latter (bko#214101).
+ * Clear the wrong entry.
+ */
+ if (codec->fixup_id == ALC282_FIXUP_ASUS_TX300 &&
+ codec->core.vendor_id == 0x10ec0294) {
+ codec_dbg(codec, "Clear wrong fixup for ASUS ROG Strix G17\n");
+ codec->fixup_id = HDA_FIXUP_ID_NOT_SET;
+ }
+
snd_hda_pick_pin_fixup(codec, alc269_pin_fixup_tbl, alc269_fixups, true);
snd_hda_pick_pin_fixup(codec, alc269_fallback_pin_fixup_tbl, alc269_fixups, false);
snd_hda_pick_fixup(codec, NULL, alc269_fixup_vendor_tbl,
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index 014c43862826..3cb1a584bf80 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -1286,6 +1286,11 @@ int snd_usb_endpoint_configure(struct snd_usb_audio *chip,
* to be set up before parameter setups
*/
iface_first = ep->cur_audiofmt->protocol == UAC_VERSION_1;
+ /* Workaround for Sony WALKMAN NW-A45 DAC;
+ * it requires the interface setup at first like UAC1
+ */
+ if (chip->usb_id == USB_ID(0x054c, 0x0b8c))
+ iface_first = true;
if (iface_first) {
err = endpoint_set_interface(chip, ep, true);
if (err < 0)
^ permalink raw reply related [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-09-08 7:07 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-09-08 7:06 Linux 5.13.15 Greg Kroah-Hartman
2021-09-08 7:06 ` Greg Kroah-Hartman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).