From: Anshuman Khandual <anshuman.khandual@arm.com>
To: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: suzuki.poulose@arm.com, mark.rutland@arm.com, will@kernel.org,
catalin.marinas@arm.com, maz@kernel.org, james.morse@arm.com,
steven.price@arm.com,
Anshuman Khandual <anshuman.khandual@arm.com>
Subject: [RFC V3 07/13] arm64/mm: Add FEAT_LPA2 specific encoding
Date: Thu, 30 Sep 2021 16:05:10 +0530 [thread overview]
Message-ID: <1632998116-11552-8-git-send-email-anshuman.khandual@arm.com> (raw)
In-Reply-To: <1632998116-11552-1-git-send-email-anshuman.khandual@arm.com>
FEAT_LPA2 requires different PTE representation formats for both 4K and 16K
page size config. This adds FEAT_LPA2 specific new PTE encodings as per ARM
ARM (0487G.A) which updates [pte|phys]_to_[phys|pte](). The updated helpers
would be used when FEAT_LPA2 gets enabled via CONFIG_ARM64_PA_BITS_52 on 4K
and 16K page size. Although TTBR encoding and phys_to_ttbr() helper remains
the same as FEAT_LPA for FEAT_LPA2 as well. It updates 'phys_to_pte' helper
to accept a temporary variable and changes impacted call sites.
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
---
arch/arm64/include/asm/assembler.h | 14 +++++++++++---
arch/arm64/include/asm/pgtable-hwdef.h | 4 ++++
arch/arm64/include/asm/pgtable.h | 4 ++++
3 files changed, 19 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/include/asm/assembler.h b/arch/arm64/include/asm/assembler.h
index 3fbe04a..c1543067 100644
--- a/arch/arm64/include/asm/assembler.h
+++ b/arch/arm64/include/asm/assembler.h
@@ -628,6 +628,10 @@ alternative_endif
*/
orr \pte, \phys, \phys, lsr #36
and \pte, \pte, #PTE_ADDR_MASK
+#elif defined(CONFIG_ARM64_PA_BITS_52_LPA2)
+ orr \pte, \phys, \phys, lsr #42
+ and \pte, \pte, #PTE_ADDR_MASK | GENMASK(PAGE_SHIFT - 1, 10)
+ and \pte, \pte, #~GENMASK(PAGE_SHIFT - 1, 10)
#else /* !CONFIG_ARM64_PA_BITS_52_LPA */
mov \pte, \phys
#endif /* CONFIG_ARM64_PA_BITS_52_LPA */
@@ -635,9 +639,13 @@ alternative_endif
.macro pte_to_phys, phys, pte
#ifdef CONFIG_ARM64_PA_BITS_52_LPA
- ubfiz \phys, \pte, #(48 - 16 - 12), #16
- bfxil \phys, \pte, #16, #32
- lsl \phys, \phys, #16
+ ubfiz \phys, \pte, #(48 - PAGE_SHIFT - 12), #16
+ bfxil \phys, \pte, #PAGE_SHIFT, #(48 - PAGE_SHIFT)
+ lsl \phys, \phys, #PAGE_SHIFT
+#elif defined(CONFIG_ARM64_PA_BITS_52_LPA2)
+ ubfiz \phys, \pte, #(52 - PAGE_SHIFT - 10), #10
+ bfxil \phys, \pte, #PAGE_SHIFT, #(50 - PAGE_SHIFT)
+ lsl \phys, \phys, #PAGE_SHIFT
#else /* !CONFIG_ARM64_PA_BITS_52_LPA */
and \phys, \pte, #PTE_ADDR_MASK
#endif /* CONFIG_ARM64_PA_BITS_52_LPA */
diff --git a/arch/arm64/include/asm/pgtable-hwdef.h b/arch/arm64/include/asm/pgtable-hwdef.h
index f375bcf..c815a85 100644
--- a/arch/arm64/include/asm/pgtable-hwdef.h
+++ b/arch/arm64/include/asm/pgtable-hwdef.h
@@ -159,6 +159,10 @@
#define PTE_ADDR_LOW (((_AT(pteval_t, 1) << (48 - PAGE_SHIFT)) - 1) << PAGE_SHIFT)
#define PTE_ADDR_HIGH (_AT(pteval_t, 0xf) << 12)
#define PTE_ADDR_MASK (PTE_ADDR_LOW | PTE_ADDR_HIGH)
+#elif defined(CONFIG_ARM64_PA_BITS_52_LPA2)
+#define PTE_ADDR_LOW (((_AT(pteval_t, 1) << (50 - PAGE_SHIFT)) - 1) << PAGE_SHIFT)
+#define PTE_ADDR_HIGH (_AT(pteval_t, 0x3) << 8)
+#define PTE_ADDR_MASK (PTE_ADDR_LOW | PTE_ADDR_HIGH)
#else /* !CONFIG_ARM64_PA_BITS_52_LPA */
#define PTE_ADDR_LOW (((_AT(pteval_t, 1) << (48 - PAGE_SHIFT)) - 1) << PAGE_SHIFT)
#define PTE_ADDR_MASK PTE_ADDR_LOW
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index 09b081e..9038d05 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -70,6 +70,10 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
#define __pte_to_phys(pte) \
((pte_val(pte) & PTE_ADDR_LOW) | ((pte_val(pte) & PTE_ADDR_HIGH) << 36))
#define __phys_to_pte_val(phys) (((phys) | ((phys) >> 36)) & PTE_ADDR_MASK)
+#elif defined(CONFIG_ARM64_PA_BITS_52_LPA2)
+#define __pte_to_phys(pte) \
+ ((pte_val(pte) & PTE_ADDR_LOW) | ((pte_val(pte) & PTE_ADDR_HIGH) << 42))
+#define __phys_to_pte_val(phys) (((phys) | ((phys) >> 42)) & PTE_ADDR_MASK)
#else /* !CONFIG_ARM64_PA_BITS_52_LPA */
#define __pte_to_phys(pte) (pte_val(pte) & PTE_ADDR_MASK)
#define __phys_to_pte_val(phys) (phys)
--
2.7.4
next prev parent reply other threads:[~2021-09-30 10:34 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-30 10:35 [RFC V3 00/13] arm64/mm: Enable FEAT_LPA2 (52 bits PA support on 4K|16K pages) Anshuman Khandual
2021-09-30 10:35 ` [RFC V3 01/13] arm64/mm: Dynamically initialize protection_map[] Anshuman Khandual
2021-09-30 10:35 ` [RFC V3 02/13] arm64/mm: Consolidate TCR_EL1 fields Anshuman Khandual
2021-09-30 10:35 ` [RFC V3 03/13] arm64/mm: Add FEAT_LPA2 specific TCR_EL1.DS field Anshuman Khandual
2021-09-30 10:35 ` [RFC V3 04/13] arm64/mm: Add FEAT_LPA2 specific VTCR_EL2.DS field Anshuman Khandual
2021-09-30 10:35 ` [RFC V3 05/13] arm64/mm: Add FEAT_LPA2 specific ID_AA64MMFR0.TGRAN[2] Anshuman Khandual
2021-09-30 10:35 ` [RFC V3 06/13] arm64/mm: Add CONFIG_ARM64_PA_BITS_52_[LPA|LPA2] Anshuman Khandual
2021-09-30 10:35 ` Anshuman Khandual [this message]
2021-10-12 10:41 ` [RFC V3 07/13] arm64/mm: Add FEAT_LPA2 specific encoding Suzuki K Poulose
2021-10-13 2:55 ` Anshuman Khandual
2021-09-30 10:35 ` [RFC V3 08/13] arm64/mm: Detect and enable FEAT_LPA2 Anshuman Khandual
2021-09-30 10:35 ` [RFC V3 09/13] arm64/mm: Add __cpu_secondary_check52bitpa() Anshuman Khandual
2021-09-30 10:35 ` [RFC V3 10/13] arm64/mm: Add FEAT_LPA2 specific PTE_SHARED and PMD_SECT_S Anshuman Khandual
2021-09-30 10:35 ` [RFC V3 11/13] arm64/mm: Add FEAT_LPA2 specific fallback (48 bits PA) when not implemented Anshuman Khandual
2021-09-30 10:35 ` [RFC V3 12/13] arm64/mm: Enable CONFIG_ARM64_PA_BITS_52 on CONFIG_ARM64_[4K|16K]_PAGES Anshuman Khandual
2021-09-30 10:35 ` [RFC V3 13/13] KVM: arm64: Enable FEAT_LPA2 based 52 bits IPA size on 4K and 16K Anshuman Khandual
2021-10-11 10:16 ` Marc Zyngier
2021-10-12 4:24 ` Anshuman Khandual
2021-10-12 8:30 ` Marc Zyngier
2021-10-13 3:28 ` Anshuman Khandual
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1632998116-11552-8-git-send-email-anshuman.khandual@arm.com \
--to=anshuman.khandual@arm.com \
--cc=catalin.marinas@arm.com \
--cc=james.morse@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=maz@kernel.org \
--cc=steven.price@arm.com \
--cc=suzuki.poulose@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).