Re: [PATCH v3 2/3] Input: add a driver for GPIO controllable vibrators

[Luca Weiss <luca@z3ntu.xyz>]

On Freitag, 12. April 2019 19:43:52 CEST Stephen Boyd wrote:
> Quoting Luca Weiss (2019-04-12 08:06:24)
> 
> > diff --git a/drivers/input/misc/gpio-vibra.c
> > b/drivers/input/misc/gpio-vibra.c new file mode 100644
> > index 000000000000..3fd2dfd4f670
> > --- /dev/null
> > +++ b/drivers/input/misc/gpio-vibra.c
> > @@ -0,0 +1,209 @@
> > +
> > +static int gpio_vibrator_probe(struct platform_device *pdev)
> > +{
> 
> [...]
> 
> > +       vibrator->input->id.bustype = BUS_HOST;
> > +       vibrator->input->close = gpio_vibrator_close;
> > +
> > +       input_set_drvdata(vibrator->input, vibrator);
> > +       input_set_capability(vibrator->input, EV_FF, FF_RUMBLE);
> > +
> > +       err = input_ff_create_memless(vibrator->input, NULL,
> > +                                     gpio_vibrator_play_effect);
> > +       if (err) {
> > +               dev_err(&pdev->dev, "Couldn't create FF dev: %d", err);
> > +               return err;
> > +       }
> > +
> > +       err = input_register_device(vibrator->input);
> > +       if (err) {
> > +               dev_err(&pdev->dev, "Couldn't register input dev: %d",
> > err);
> All the printks in this file need a newline.
Fixed.
> > +               return err;
> > +       }
> > +
> > +       platform_set_drvdata(pdev, vibrator);
> > +
> > +       return 0;
> > +}
> > +
> > +
> > +#ifdef CONFIG_OF
> > +static const struct of_device_id gpio_vibra_dt_match_table[] = {
> > +       { .compatible = "gpio-vibrator" },
> > +       {},
> 
> Nitpick: Drop the comma on the sentinel so nothing can go after it
> without causing a compilation error.
Changed as well.
> > +};
> > +MODULE_DEVICE_TABLE(of, gpio_vibra_dt_match_table);
> > +#endif
> > +

Thanks for the review! Will send a v4 shortly.
Luca