[PATCH v9 2/5] usb: dwc3: core: Host wake up support from system suspend

[Sandeep Maheswaram <quic_c_sanm@quicinc.com>]

Avoiding phy powerdown when wakeup capable devices are connected
by checking wakeup property of xhci plat device.
Phy should be on to wake up the device from suspend using wakeup capable
devices such as keyboard and mouse.

Signed-off-by: Sandeep Maheswaram <quic_c_sanm@quicinc.com>
---
 drivers/usb/dwc3/core.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 643239d..a6ad0ed 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1787,7 +1787,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
 		dwc3_core_exit(dwc);
 		break;
 	case DWC3_GCTL_PRTCAP_HOST:
-		if (!PMSG_IS_AUTO(msg)) {
+		if (!PMSG_IS_AUTO(msg) && !device_may_wakeup(&dwc->xhci->dev)) {
 			dwc3_core_exit(dwc);
 			break;
 		}
@@ -1848,13 +1848,16 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
 		spin_unlock_irqrestore(&dwc->lock, flags);
 		break;
 	case DWC3_GCTL_PRTCAP_HOST:
-		if (!PMSG_IS_AUTO(msg)) {
+		if (!PMSG_IS_AUTO(msg) && !device_may_wakeup(&dwc->xhci->dev)) {
 			ret = dwc3_core_init_for_resume(dwc);
 			if (ret)
 				return ret;
 			dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
 			break;
+		} else {
+			dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
 		}
+
 		/* Restore GUSB2PHYCFG bits that were modified in suspend */
 		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
 		if (dwc->dis_u2_susphy_quirk)
-- 
2.7.4