From: Richard Zhu <hongxing.zhu@nxp.com>
To: l.stach@pengutronix.de, marcel.ziswiler@toradex.com,
tharvey@gateworks.com, kishon@ti.com, vkoul@kernel.org,
robh@kernel.org, galak@kernel.crashing.org, shawnguo@kernel.org
Cc: linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@pengutronix.de,
linux-imx@nxp.com, Richard Zhu <hongxing.zhu@nxp.com>
Subject: [PATCH v6 8/8] PCI: imx: Add the imx8mm pcie support
Date: Tue, 16 Nov 2021 10:16:16 +0800 [thread overview]
Message-ID: <1637028976-9201-9-git-send-email-hongxing.zhu@nxp.com> (raw)
In-Reply-To: <1637028976-9201-1-git-send-email-hongxing.zhu@nxp.com>
i.MX8MM PCIe works mostly like the i.MX8MQ one, but has a different PHY
and allows to output the internal PHY reference clock via the refclk pad.
Add the i.MX8MM PCIe support based on the standalone PHY driver.
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
---
drivers/pci/controller/dwc/pci-imx6.c | 73 ++++++++++++++++++++++++---
1 file changed, 66 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 26f49f797b0f..d8c587b4d54f 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -29,6 +29,7 @@
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/reset.h>
+#include <linux/phy/phy.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
@@ -49,6 +50,7 @@ enum imx6_pcie_variants {
IMX6QP,
IMX7D,
IMX8MQ,
+ IMX8MM,
};
#define IMX6_PCIE_FLAG_IMX6_PHY BIT(0)
@@ -88,6 +90,7 @@ struct imx6_pcie {
struct device *pd_pcie;
/* power domain for pcie phy */
struct device *pd_pcie_phy;
+ struct phy *phy;
const struct imx6_pcie_drvdata *drvdata;
};
@@ -372,6 +375,8 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
case IMX7D:
case IMX8MQ:
reset_control_assert(imx6_pcie->pciephy_reset);
+ fallthrough;
+ case IMX8MM:
reset_control_assert(imx6_pcie->apps_reset);
break;
case IMX6SX:
@@ -407,7 +412,8 @@ static void imx6_pcie_assert_core_reset(struct imx6_pcie *imx6_pcie)
static unsigned int imx6_pcie_grp_offset(const struct imx6_pcie *imx6_pcie)
{
- WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ);
+ WARN_ON(imx6_pcie->drvdata->variant != IMX8MQ &&
+ imx6_pcie->drvdata->variant != IMX8MM);
return imx6_pcie->controller_id == 1 ? IOMUXC_GPR16 : IOMUXC_GPR14;
}
@@ -446,6 +452,13 @@ static int imx6_pcie_enable_ref_clk(struct imx6_pcie *imx6_pcie)
break;
case IMX7D:
break;
+ case IMX8MM:
+ ret = clk_prepare_enable(imx6_pcie->pcie_aux);
+ if (ret) {
+ dev_err(dev, "unable to enable pcie_aux clock\n");
+ break;
+ }
+ break;
case IMX8MQ:
ret = clk_prepare_enable(imx6_pcie->pcie_aux);
if (ret) {
@@ -522,6 +535,14 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
goto err_ref_clk;
}
+ switch (imx6_pcie->drvdata->variant) {
+ case IMX8MM:
+ if (phy_power_on(imx6_pcie->phy))
+ dev_err(dev, "unable to power on PHY\n");
+ break;
+ default:
+ break;
+ }
/* allow the clocks to stabilize */
usleep_range(200, 500);
@@ -538,6 +559,10 @@ static void imx6_pcie_deassert_core_reset(struct imx6_pcie *imx6_pcie)
case IMX8MQ:
reset_control_deassert(imx6_pcie->pciephy_reset);
break;
+ case IMX8MM:
+ if (phy_init(imx6_pcie->phy) != 0)
+ dev_err(dev, "Waiting for PHY ready timeout!\n");
+ break;
case IMX7D:
reset_control_deassert(imx6_pcie->pciephy_reset);
@@ -614,6 +639,8 @@ static void imx6_pcie_configure_type(struct imx6_pcie *imx6_pcie)
static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
{
switch (imx6_pcie->drvdata->variant) {
+ case IMX8MM:
+ break;
case IMX8MQ:
/*
* TODO: Currently this code assumes external
@@ -753,6 +780,7 @@ static void imx6_pcie_ltssm_enable(struct device *dev)
break;
case IMX7D:
case IMX8MQ:
+ case IMX8MM:
reset_control_deassert(imx6_pcie->apps_reset);
break;
}
@@ -871,6 +899,7 @@ static void imx6_pcie_ltssm_disable(struct device *dev)
IMX6Q_GPR12_PCIE_CTL_2, 0);
break;
case IMX7D:
+ case IMX8MM:
reset_control_assert(imx6_pcie->apps_reset);
break;
default:
@@ -930,6 +959,7 @@ static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie)
IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
break;
case IMX8MQ:
+ case IMX8MM:
clk_disable_unprepare(imx6_pcie->pcie_aux);
break;
default:
@@ -1043,11 +1073,6 @@ static int imx6_pcie_probe(struct platform_device *pdev)
}
/* Fetch clocks */
- imx6_pcie->pcie_phy = devm_clk_get(dev, "pcie_phy");
- if (IS_ERR(imx6_pcie->pcie_phy))
- return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_phy),
- "pcie_phy clock source missing or invalid\n");
-
imx6_pcie->pcie_bus = devm_clk_get(dev, "pcie_bus");
if (IS_ERR(imx6_pcie->pcie_bus))
return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_bus),
@@ -1089,10 +1114,39 @@ static int imx6_pcie_probe(struct platform_device *pdev)
dev_err(dev, "Failed to get PCIE APPS reset control\n");
return PTR_ERR(imx6_pcie->apps_reset);
}
+ break;
+ case IMX8MM:
+ imx6_pcie->pcie_aux = devm_clk_get(dev, "pcie_aux");
+ if (IS_ERR(imx6_pcie->pcie_aux))
+ return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_aux),
+ "pcie_aux clock source missing or invalid\n");
+ imx6_pcie->apps_reset = devm_reset_control_get_exclusive(dev,
+ "apps");
+ if (IS_ERR(imx6_pcie->apps_reset)) {
+ dev_err(dev, "Failed to get PCIE APPS reset control\n");
+ return PTR_ERR(imx6_pcie->apps_reset);
+ }
+
+ imx6_pcie->phy = devm_phy_get(dev, "pcie-phy");
+ if (IS_ERR(imx6_pcie->phy)) {
+ if (PTR_ERR(imx6_pcie->phy) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ dev_err(dev, "Failed to get PCIE PHY\n");
+ return PTR_ERR(imx6_pcie->phy);
+ }
+
break;
default:
break;
}
+ /* Don't fetch the pcie_phy clock, if it has abstract PHY driver */
+ if (imx6_pcie->phy == NULL) {
+ imx6_pcie->pcie_phy = devm_clk_get(dev, "pcie_phy");
+ if (IS_ERR(imx6_pcie->pcie_phy))
+ return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_phy),
+ "pcie_phy clock source missing or invalid\n");
+ }
+
/* Grab turnoff reset */
imx6_pcie->turnoff_reset = devm_reset_control_get_optional_exclusive(dev, "turnoff");
@@ -1202,6 +1256,10 @@ static const struct imx6_pcie_drvdata drvdata[] = {
[IMX8MQ] = {
.variant = IMX8MQ,
},
+ [IMX8MM] = {
+ .variant = IMX8MM,
+ .flags = IMX6_PCIE_FLAG_SUPPORTS_SUSPEND,
+ },
};
static const struct of_device_id imx6_pcie_of_match[] = {
@@ -1209,7 +1267,8 @@ static const struct of_device_id imx6_pcie_of_match[] = {
{ .compatible = "fsl,imx6sx-pcie", .data = &drvdata[IMX6SX], },
{ .compatible = "fsl,imx6qp-pcie", .data = &drvdata[IMX6QP], },
{ .compatible = "fsl,imx7d-pcie", .data = &drvdata[IMX7D], },
- { .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], } ,
+ { .compatible = "fsl,imx8mq-pcie", .data = &drvdata[IMX8MQ], },
+ { .compatible = "fsl,imx8mm-pcie", .data = &drvdata[IMX8MM], },
{},
};
--
2.25.1
next prev parent reply other threads:[~2021-11-16 2:46 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-16 2:16 [PATCH v6 0/8] Add the imx8m pcie phy driver and imx8mm pcie support Richard Zhu
2021-11-16 2:16 ` [PATCH v6 1/8] dt-bindings: phy: phy-imx8-pcie: Add binding for the pad modes of imx8 pcie phy Richard Zhu
2021-11-16 2:16 ` [PATCH v6 2/8] dt-bindings: phy: Add imx8 pcie phy driver support Richard Zhu
2021-11-16 2:16 ` [PATCH v6 3/8] dt-bindings: imx6q-pcie: Add PHY phandles and name properties Richard Zhu
2021-11-16 2:16 ` [PATCH v6 4/8] arm64: dts: imx8mm: Add the pcie phy support Richard Zhu
2021-11-16 2:16 ` [PATCH v6 5/8] phy: freescale: pcie: Initialize the imx8 pcie standalone phy driver Richard Zhu
2021-11-16 2:16 ` [PATCH v6 6/8] arm64: dts: imx8mm: Add the pcie support Richard Zhu
2021-11-16 2:16 ` [PATCH v6 7/8] arm64: dts: imx8mm-evk: Add the pcie support on imx8mm evk board Richard Zhu
2021-11-16 2:16 ` Richard Zhu [this message]
2021-11-18 1:54 [PATCH v6 0/8] Add the imx8m pcie phy driver and imx8mm pcie support Richard Zhu
2021-11-18 1:54 ` [PATCH v6 8/8] PCI: imx: Add the " Richard Zhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1637028976-9201-9-git-send-email-hongxing.zhu@nxp.com \
--to=hongxing.zhu@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@kernel.crashing.org \
--cc=kernel@pengutronix.de \
--cc=kishon@ti.com \
--cc=l.stach@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=marcel.ziswiler@toradex.com \
--cc=robh@kernel.org \
--cc=shawnguo@kernel.org \
--cc=tharvey@gateworks.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).