* [PATCH] blk-cgroup: fix missing put device in error path from blkg_conf_pref()
@ 2021-11-02 2:07 Yu Kuai
2021-11-06 9:12 ` yukuai (C)
` (3 more replies)
0 siblings, 4 replies; 5+ messages in thread
From: Yu Kuai @ 2021-11-02 2:07 UTC (permalink / raw)
To: tj, axboe, yukuai3; +Cc: cgroups, linux-block, linux-kernel, yi.zhang
If blk_queue_enter() failed due to queue is dying, the
blkdev_put_no_open() is needed because blkcg_conf_open_bdev() succeeded.
Fixes: 0c9d338c8443 ("blk-cgroup: synchronize blkg creation against policy deactivation")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
---
block/blk-cgroup.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index 88b1fce90520..663aabfeba18 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -640,7 +640,7 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol,
*/
ret = blk_queue_enter(q, 0);
if (ret)
- return ret;
+ goto fail;
rcu_read_lock();
spin_lock_irq(&q->queue_lock);
@@ -676,13 +676,13 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol,
new_blkg = blkg_alloc(pos, q, GFP_KERNEL);
if (unlikely(!new_blkg)) {
ret = -ENOMEM;
- goto fail;
+ goto fail_exit_queue;
}
if (radix_tree_preload(GFP_KERNEL)) {
blkg_free(new_blkg);
ret = -ENOMEM;
- goto fail;
+ goto fail_exit_queue;
}
rcu_read_lock();
@@ -722,9 +722,10 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol,
fail_unlock:
spin_unlock_irq(&q->queue_lock);
rcu_read_unlock();
+fail_exit_queue:
+ blk_queue_exit(q);
fail:
blkdev_put_no_open(bdev);
- blk_queue_exit(q);
/*
* If queue was bypassing, we should retry. Do so after a
* short msleep(). It isn't strictly necessary but queue
--
2.31.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH] blk-cgroup: fix missing put device in error path from blkg_conf_pref()
2021-11-02 2:07 [PATCH] blk-cgroup: fix missing put device in error path from blkg_conf_pref() Yu Kuai
@ 2021-11-06 9:12 ` yukuai (C)
2021-11-15 21:37 ` Tejun Heo
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: yukuai (C) @ 2021-11-06 9:12 UTC (permalink / raw)
To: tj, axboe; +Cc: cgroups, linux-block, linux-kernel, yi.zhang
On 2021/11/02 10:07, Yu Kuai wrote:
friendly ping...
> If blk_queue_enter() failed due to queue is dying, the
> blkdev_put_no_open() is needed because blkcg_conf_open_bdev() succeeded.
>
> Fixes: 0c9d338c8443 ("blk-cgroup: synchronize blkg creation against policy deactivation")
> Signed-off-by: Yu Kuai <yukuai3@huawei.com>
> ---
> block/blk-cgroup.c | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
> index 88b1fce90520..663aabfeba18 100644
> --- a/block/blk-cgroup.c
> +++ b/block/blk-cgroup.c
> @@ -640,7 +640,7 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol,
> */
> ret = blk_queue_enter(q, 0);
> if (ret)
> - return ret;
> + goto fail;
>
> rcu_read_lock();
> spin_lock_irq(&q->queue_lock);
> @@ -676,13 +676,13 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol,
> new_blkg = blkg_alloc(pos, q, GFP_KERNEL);
> if (unlikely(!new_blkg)) {
> ret = -ENOMEM;
> - goto fail;
> + goto fail_exit_queue;
> }
>
> if (radix_tree_preload(GFP_KERNEL)) {
> blkg_free(new_blkg);
> ret = -ENOMEM;
> - goto fail;
> + goto fail_exit_queue;
> }
>
> rcu_read_lock();
> @@ -722,9 +722,10 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol,
> fail_unlock:
> spin_unlock_irq(&q->queue_lock);
> rcu_read_unlock();
> +fail_exit_queue:
> + blk_queue_exit(q);
> fail:
> blkdev_put_no_open(bdev);
> - blk_queue_exit(q);
> /*
> * If queue was bypassing, we should retry. Do so after a
> * short msleep(). It isn't strictly necessary but queue
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] blk-cgroup: fix missing put device in error path from blkg_conf_pref()
2021-11-02 2:07 [PATCH] blk-cgroup: fix missing put device in error path from blkg_conf_pref() Yu Kuai
2021-11-06 9:12 ` yukuai (C)
@ 2021-11-15 21:37 ` Tejun Heo
2021-11-19 8:09 ` yukuai (C)
2021-11-19 13:27 ` Jens Axboe
3 siblings, 0 replies; 5+ messages in thread
From: Tejun Heo @ 2021-11-15 21:37 UTC (permalink / raw)
To: Yu Kuai; +Cc: axboe, cgroups, linux-block, linux-kernel, yi.zhang
On Tue, Nov 02, 2021 at 10:07:05AM +0800, Yu Kuai wrote:
> If blk_queue_enter() failed due to queue is dying, the
> blkdev_put_no_open() is needed because blkcg_conf_open_bdev() succeeded.
>
> Fixes: 0c9d338c8443 ("blk-cgroup: synchronize blkg creation against policy deactivation")
> Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Thanks.
--
tejun
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] blk-cgroup: fix missing put device in error path from blkg_conf_pref()
2021-11-02 2:07 [PATCH] blk-cgroup: fix missing put device in error path from blkg_conf_pref() Yu Kuai
2021-11-06 9:12 ` yukuai (C)
2021-11-15 21:37 ` Tejun Heo
@ 2021-11-19 8:09 ` yukuai (C)
2021-11-19 13:27 ` Jens Axboe
3 siblings, 0 replies; 5+ messages in thread
From: yukuai (C) @ 2021-11-19 8:09 UTC (permalink / raw)
To: tj, axboe; +Cc: cgroups, linux-block, linux-kernel, yi.zhang
On 2021/11/02 10:07, Yu Kuai wrote:
Hi, Jens
friendly ping ...
Thanks,
Kuai
> If blk_queue_enter() failed due to queue is dying, the
> blkdev_put_no_open() is needed because blkcg_conf_open_bdev() succeeded.
>
> Fixes: 0c9d338c8443 ("blk-cgroup: synchronize blkg creation against policy deactivation")
> Signed-off-by: Yu Kuai <yukuai3@huawei.com>
> ---
> block/blk-cgroup.c | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
> index 88b1fce90520..663aabfeba18 100644
> --- a/block/blk-cgroup.c
> +++ b/block/blk-cgroup.c
> @@ -640,7 +640,7 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol,
> */
> ret = blk_queue_enter(q, 0);
> if (ret)
> - return ret;
> + goto fail;
>
> rcu_read_lock();
> spin_lock_irq(&q->queue_lock);
> @@ -676,13 +676,13 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol,
> new_blkg = blkg_alloc(pos, q, GFP_KERNEL);
> if (unlikely(!new_blkg)) {
> ret = -ENOMEM;
> - goto fail;
> + goto fail_exit_queue;
> }
>
> if (radix_tree_preload(GFP_KERNEL)) {
> blkg_free(new_blkg);
> ret = -ENOMEM;
> - goto fail;
> + goto fail_exit_queue;
> }
>
> rcu_read_lock();
> @@ -722,9 +722,10 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol,
> fail_unlock:
> spin_unlock_irq(&q->queue_lock);
> rcu_read_unlock();
> +fail_exit_queue:
> + blk_queue_exit(q);
> fail:
> blkdev_put_no_open(bdev);
> - blk_queue_exit(q);
> /*
> * If queue was bypassing, we should retry. Do so after a
> * short msleep(). It isn't strictly necessary but queue
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] blk-cgroup: fix missing put device in error path from blkg_conf_pref()
2021-11-02 2:07 [PATCH] blk-cgroup: fix missing put device in error path from blkg_conf_pref() Yu Kuai
` (2 preceding siblings ...)
2021-11-19 8:09 ` yukuai (C)
@ 2021-11-19 13:27 ` Jens Axboe
3 siblings, 0 replies; 5+ messages in thread
From: Jens Axboe @ 2021-11-19 13:27 UTC (permalink / raw)
To: tj, Yu Kuai; +Cc: linux-kernel, cgroups, linux-block, yi.zhang
On Tue, 2 Nov 2021 10:07:05 +0800, Yu Kuai wrote:
> If blk_queue_enter() failed due to queue is dying, the
> blkdev_put_no_open() is needed because blkcg_conf_open_bdev() succeeded.
>
>
Applied, thanks!
[1/1] blk-cgroup: fix missing put device in error path from blkg_conf_pref()
commit: 15c30104965101b8e76b24d27035569d6613a7d6
Best regards,
--
Jens Axboe
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-11-19 13:27 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-02 2:07 [PATCH] blk-cgroup: fix missing put device in error path from blkg_conf_pref() Yu Kuai
2021-11-06 9:12 ` yukuai (C)
2021-11-15 21:37 ` Tejun Heo
2021-11-19 8:09 ` yukuai (C)
2021-11-19 13:27 ` Jens Axboe
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).