From: Jes Sorensen <jes@trained-monkey.org>
To: linux-kernel@vger.kernel.org
Cc: acpi-devel@lists.sourceforge.net, jbarnes@sgi.com, steiner@sgi.com
Subject: RFC: ACPI table overflow handling
Date: Thu, 8 Jan 2004 09:45:20 -0500 [thread overview]
Message-ID: <16381.27904.580087.442358@gargle.gargle.HOWL> (raw)
Hi,
We ran into a problem with the current ACPI NUMA code overflowing an
array if the number of CPUs found in the SRAT was greater than NR_CPUS.
Looking at the acpi_table_parse_madt() I noticed that it doesn't do
anything to handle overflows, instead it relies on hacks in the
call-back functions to come up with a check instead, the various checks
in place are somewhat inconsistent in their implementation.
I could just hack the NUMA srat_num_cpus handling code to have a limit
as IMHO it is a lot cleaner to improve the acpi_table_parse_madt() API
by adding a max_entries argument and then have acpi_table_parse_madt
spit out a warning if it found too many entries.
Patch attached, it was generated against 2.6.0-test11 but applies fine
with a little fuzz to 2.6.1-rc2 (my apologies for not having fixed
x86_64 yet, it should be trivial to apply the i386 changes to the x86_64
tree as well).
I'd appreciate comments/oppinions/suggestions?
Thanks,
Jes
diff -urN -X /usr/people/jes/exclude-linux --exclude=io --exclude=sn --exclude='qla1280.[ch]' orig/linux-2.6.0-test11-ia64/arch/i386/kernel/acpi/boot.c linux-2.6.0-test11-ia64/arch/i386/kernel/acpi/boot.c
--- orig/linux-2.6.0-test11-ia64/arch/i386/kernel/acpi/boot.c Wed Nov 26 12:45:28 2003
+++ linux-2.6.0-test11-ia64/arch/i386/kernel/acpi/boot.c Thu Jan 8 05:11:49 2004
@@ -44,8 +44,8 @@
extern int acpi_irq;
extern int acpi_ht;
-int acpi_lapic = 0;
-int acpi_ioapic = 0;
+int acpi_lapic;
+int acpi_ioapic;
/* --------------------------------------------------------------------------
Boot-time Configuration
@@ -418,7 +418,7 @@
* and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value).
*/
- result = acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr);
+ result = acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 65536);
if (result < 0) {
printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n");
return result;
@@ -426,7 +426,8 @@
mp_register_lapic_address(acpi_lapic_addr);
- result = acpi_table_parse_madt(ACPI_MADT_LAPIC, acpi_parse_lapic);
+ result = acpi_table_parse_madt(ACPI_MADT_LAPIC, acpi_parse_lapic,
+ MAX_APICS);
if (!result) {
printk(KERN_ERR PREFIX "No LAPIC entries present\n");
/* TBD: Cleanup to allow fallback to MPS */
@@ -438,7 +439,7 @@
return result;
}
- result = acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi);
+ result = acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 65536);
if (result < 0) {
printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
/* TBD: Cleanup to allow fallback to MPS */
@@ -475,8 +476,8 @@
return 1;
}
- result = acpi_table_parse_madt(ACPI_MADT_IOAPIC, acpi_parse_ioapic);
- if (!result) {
+ result = acpi_table_parse_madt(ACPI_MADT_IOAPIC, acpi_parse_ioapic, MAX_IO_APICS);
+ if (!result) {
printk(KERN_ERR PREFIX "No IOAPIC entries present\n");
return -ENODEV;
}
@@ -488,14 +489,14 @@
/* Build a default routing table for legacy (ISA) interrupts. */
mp_config_acpi_legacy_irqs();
- result = acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr);
+ result = acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, NR_IRQ_VECTORS);
if (result < 0) {
printk(KERN_ERR PREFIX "Error parsing interrupt source overrides entry\n");
/* TBD: Cleanup to allow fallback to MPS */
return result;
}
- result = acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src);
+ result = acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, NR_IRQ_VECTORS);
if (result < 0) {
printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
/* TBD: Cleanup to allow fallback to MPS */
diff -urN -X /usr/people/jes/exclude-linux --exclude=io --exclude=sn --exclude='qla1280.[ch]' orig/linux-2.6.0-test11-ia64/arch/ia64/kernel/acpi.c linux-2.6.0-test11-ia64/arch/ia64/kernel/acpi.c
--- orig/linux-2.6.0-test11-ia64/arch/ia64/kernel/acpi.c Wed Nov 26 12:44:07 2003
+++ linux-2.6.0-test11-ia64/arch/ia64/kernel/acpi.c Thu Jan 8 03:03:46 2004
@@ -550,29 +550,34 @@
/* Local APIC */
- if (acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr) < 0)
+ /*
+ * For the callback functions that do not have problems with maximum
+ * table sizes internally, we use 65536 - please adjust if you ever
+ * build a system with more ;-)
+ */
+ if (acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 65536) < 0)
printk(KERN_ERR PREFIX "Error parsing LAPIC address override entry\n");
- if (acpi_table_parse_madt(ACPI_MADT_LSAPIC, acpi_parse_lsapic) < 1)
+ if (acpi_table_parse_madt(ACPI_MADT_LSAPIC, acpi_parse_lsapic, NR_CPUS) < 1)
printk(KERN_ERR PREFIX "Error parsing MADT - no LAPIC entries\n");
- if (acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi) < 0)
+ if (acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 65536) < 0)
printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
/* I/O APIC */
- if (acpi_table_parse_madt(ACPI_MADT_IOSAPIC, acpi_parse_iosapic) < 1)
+ if (acpi_table_parse_madt(ACPI_MADT_IOSAPIC, acpi_parse_iosapic, 256) < 1)
printk(KERN_ERR PREFIX "Error parsing MADT - no IOSAPIC entries\n");
/* System-Level Interrupt Routing */
- if (acpi_table_parse_madt(ACPI_MADT_PLAT_INT_SRC, acpi_parse_plat_int_src) < 0)
+ if (acpi_table_parse_madt(ACPI_MADT_PLAT_INT_SRC, acpi_parse_plat_int_src, ACPI_MAX_PLATFORM_INTERRUPTS) < 0)
printk(KERN_ERR PREFIX "Error parsing platform interrupt source entry\n");
- if (acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr) < 0)
+ if (acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, 65536) < 0)
printk(KERN_ERR PREFIX "Error parsing interrupt source overrides entry\n");
- if (acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src) < 0)
+ if (acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, 65536) < 0)
printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
skip_madt:
diff -urN -X /usr/people/jes/exclude-linux --exclude=io --exclude=sn --exclude='qla1280.[ch]' orig/linux-2.6.0-test11-ia64/drivers/acpi/numa.c linux-2.6.0-test11-ia64/drivers/acpi/numa.c
--- orig/linux-2.6.0-test11-ia64/drivers/acpi/numa.c Thu Dec 11 04:22:40 2003
+++ linux-2.6.0-test11-ia64/drivers/acpi/numa.c Thu Jan 8 02:49:24 2004
@@ -38,7 +38,7 @@
#define Dprintk(x...)
#endif
-extern int __init acpi_table_parse_madt_family (enum acpi_table_id id, unsigned long madt_size, int entry_id, acpi_madt_entry_handler handler);
+extern int __init acpi_table_parse_madt_family (enum acpi_table_id id, unsigned long madt_size, int entry_id, acpi_madt_entry_handler handler, int max_entries);
void __init
acpi_table_print_srat_entry (
@@ -156,10 +156,11 @@
int __init
acpi_table_parse_srat (
enum acpi_srat_entry_id id,
- acpi_madt_entry_handler handler)
+ acpi_madt_entry_handler handler,
+ int max_entries)
{
return acpi_table_parse_madt_family(ACPI_SRAT, sizeof(struct acpi_table_srat),
- id, handler);
+ id, handler, max_entries);
}
@@ -173,9 +174,11 @@
if (result > 0) {
result = acpi_table_parse_srat(ACPI_SRAT_PROCESSOR_AFFINITY,
- acpi_parse_processor_affinity);
+ acpi_parse_processor_affinity,
+ NR_CPUS);
result = acpi_table_parse_srat(ACPI_SRAT_MEMORY_AFFINITY,
- acpi_parse_memory_affinity);
+ acpi_parse_memory_affinity,
+ NR_MEMBLKS);
} else {
/* FIXME */
printk("Warning: acpi_table_parse(ACPI_SRAT) returned %d!\n",result);
diff -urN -X /usr/people/jes/exclude-linux --exclude=io --exclude=sn --exclude='qla1280.[ch]' orig/linux-2.6.0-test11-ia64/drivers/acpi/tables.c linux-2.6.0-test11-ia64/drivers/acpi/tables.c
--- orig/linux-2.6.0-test11-ia64/drivers/acpi/tables.c Thu Dec 11 04:22:40 2003
+++ linux-2.6.0-test11-ia64/drivers/acpi/tables.c Thu Jan 8 04:46:09 2004
@@ -295,13 +295,14 @@
enum acpi_table_id id,
unsigned long madt_size,
int entry_id,
- acpi_madt_entry_handler handler)
+ acpi_madt_entry_handler handler,
+ int max_entries)
{
void *madt = NULL;
- acpi_table_entry_header *entry = NULL;
- unsigned long count = 0;
- unsigned long madt_end = 0;
- unsigned int i = 0;
+ acpi_table_entry_header *entry;
+ unsigned int count = 0;
+ unsigned long madt_end;
+ unsigned int i;
if (!handler)
return -EINVAL;
@@ -335,13 +336,17 @@
((unsigned long) madt + madt_size);
while (((unsigned long) entry) < madt_end) {
- if (entry->type == entry_id) {
- count++;
+ if (entry->type == entry_id && count++ < max_entries)
handler(entry);
- }
+
entry = (acpi_table_entry_header *)
((unsigned long) entry + entry->length);
}
+ if (count > max_entries) {
+ printk(KERN_WARNING PREFIX "[%s:0x%02x] ignored %i entries of "
+ "%i found\n", acpi_table_signatures[id], entry_id,
+ count - max_entries, count);
+ }
return count;
}
@@ -350,10 +355,11 @@
int __init
acpi_table_parse_madt (
enum acpi_madt_entry_id id,
- acpi_madt_entry_handler handler)
+ acpi_madt_entry_handler handler,
+ int max_entries)
{
return acpi_table_parse_madt_family(ACPI_APIC, sizeof(struct acpi_table_madt),
- id, handler);
+ id, handler, max_entries);
}
@@ -578,4 +584,3 @@
return 0;
}
-
diff -urN -X /usr/people/jes/exclude-linux --exclude=io --exclude=sn --exclude='qla1280.[ch]' orig/linux-2.6.0-test11-ia64/include/linux/acpi.h linux-2.6.0-test11-ia64/include/linux/acpi.h
--- orig/linux-2.6.0-test11-ia64/include/linux/acpi.h Wed Nov 26 12:42:43 2003
+++ linux-2.6.0-test11-ia64/include/linux/acpi.h Thu Jan 8 03:08:06 2004
@@ -355,8 +355,8 @@
int acpi_table_init (void);
int acpi_table_parse (enum acpi_table_id id, acpi_table_handler handler);
int acpi_get_table_header_early (enum acpi_table_id id, struct acpi_table_header **header);
-int acpi_table_parse_madt (enum acpi_madt_entry_id id, acpi_madt_entry_handler handler);
-int acpi_table_parse_srat (enum acpi_srat_entry_id id, acpi_madt_entry_handler handler);
+int acpi_table_parse_madt (enum acpi_madt_entry_id id, acpi_madt_entry_handler handler, int max_entries);
+int acpi_table_parse_srat (enum acpi_srat_entry_id id, acpi_madt_entry_handler handler, int max_entries);
void acpi_table_print (struct acpi_table_header *header, unsigned long phys_addr);
void acpi_table_print_madt_entry (acpi_table_entry_header *madt);
void acpi_table_print_srat_entry (acpi_table_entry_header *srat);
next reply other threads:[~2004-01-08 14:45 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-01-08 14:45 Jes Sorensen [this message]
2004-01-08 16:20 ` [ACPI] RFC: ACPI table overflow handling Bjorn Helgaas
2004-01-11 11:49 ` Jes Sorensen
2004-01-11 14:30 ` Jes Sorensen
2004-01-12 16:24 ` Bjorn Helgaas
2004-01-13 9:49 ` Jes Sorensen
2004-01-13 10:45 ` [patch] ACPI NUMA quiet printk and cleanup Jes Sorensen
2004-01-13 23:01 ` [ACPI] RFC: ACPI table overflow handling Bjorn Helgaas
2004-01-13 13:13 ` [patch] ia64 header cleanup Jes Sorensen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=16381.27904.580087.442358@gargle.gargle.HOWL \
--to=jes@trained-monkey.org \
--cc=acpi-devel@lists.sourceforge.net \
--cc=jbarnes@sgi.com \
--cc=linux-kernel@vger.kernel.org \
--cc=steiner@sgi.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).