linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sun Shouxin <sunshouxin@chinatelecom.cn>
To: j.vosburgh@gmail.com, vfalico@gmail.com, andy@greyhouse.net,
	davem@davemloft.net, kuba@kernel.org
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	huyd12@chinatelecom.cn
Subject: [PATCH] net: bonding: Add support for IPV6 ns/na
Date: Thu,  9 Dec 2021 14:50:22 +0800	[thread overview]
Message-ID: <1639032622-28098-1-git-send-email-sunshouxin@chinatelecom.cn> (raw)

Since ipv6 neighbor solicitation and advertisement messages
isn't handled gracefully in bonding6 driver, we can see packet
drop due to inconsistency bewteen mac address in the option
message and source MAC .

Another examples is ipv6 neighbor solicitation and advertisement
messages from VM via tap attached to host brighe, the src mac
mighe be changed through balance-alb mode, but it is not synced
with Link-layer address in the option message.

The patch implements bond6's tx handle for ipv6 neighbor
solicitation and advertisement messages.

Suggested-by: Hu Yadi <huyd12@chinatelecom.cn>
Signed-off-by: Sun Shouxin <sunshouxin@chinatelecom.cn>
---
 drivers/net/bonding/bond_alb.c | 127 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 127 insertions(+)

diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 2ec8e01..01566ba 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -22,6 +22,7 @@
 #include <asm/byteorder.h>
 #include <net/bonding.h>
 #include <net/bond_alb.h>
+#include <net/ndisc.h>
 
 static const u8 mac_v6_allmcast[ETH_ALEN + 2] __long_aligned = {
 	0x33, 0x33, 0x00, 0x00, 0x00, 0x01
@@ -1269,6 +1270,112 @@ static int alb_set_mac_address(struct bonding *bond, void *addr)
 	return res;
 }
 
+static void alb_change_nd_option(struct sk_buff *skb, void *data)
+{
+	struct nd_msg *msg = (struct nd_msg *)skb_transport_header(skb);
+	struct nd_opt_hdr *nd_opt = (struct nd_opt_hdr *)msg->opt;
+	struct net_device *dev = skb->dev;
+	struct icmp6hdr *icmp6h = icmp6_hdr(skb);
+	struct ipv6hdr *ip6hdr = ipv6_hdr(skb);
+	u8 *lladdr = NULL;
+	u32 ndoptlen = skb_tail_pointer(skb) - (skb_transport_header(skb) +
+				offsetof(struct nd_msg, opt));
+
+	while (ndoptlen) {
+		int l;
+
+		switch (nd_opt->nd_opt_type) {
+		case ND_OPT_SOURCE_LL_ADDR:
+		case ND_OPT_TARGET_LL_ADDR:
+		lladdr = ndisc_opt_addr_data(nd_opt, dev);
+		break;
+
+		default:
+		break;
+		}
+
+		l = nd_opt->nd_opt_len << 3;
+
+		if (ndoptlen < l || l == 0)
+			return;
+
+		if (lladdr) {
+			memcpy(lladdr, data, dev->addr_len);
+			lladdr = NULL;
+			icmp6h->icmp6_cksum = 0;
+
+			icmp6h->icmp6_cksum = csum_ipv6_magic(&ip6hdr->saddr,
+							      &ip6hdr->daddr,
+						ntohs(ip6hdr->payload_len),
+						IPPROTO_ICMPV6,
+						csum_partial(icmp6h,
+							     ntohs(ip6hdr->payload_len), 0));
+			lladdr = NULL;
+		}
+		ndoptlen -= l;
+		nd_opt = ((void *)nd_opt) + l;
+	}
+}
+
+static u8 *alb_get_lladdr(struct sk_buff *skb)
+{
+	struct nd_msg *msg = (struct nd_msg *)skb_transport_header(skb);
+	struct nd_opt_hdr *nd_opt = (struct nd_opt_hdr *)msg->opt;
+	struct net_device *dev = skb->dev;
+	u8 *lladdr = NULL;
+	u32 ndoptlen = skb_tail_pointer(skb) - (skb_transport_header(skb) +
+				offsetof(struct nd_msg, opt));
+
+	while (ndoptlen) {
+		int l;
+
+		switch (nd_opt->nd_opt_type) {
+		case ND_OPT_SOURCE_LL_ADDR:
+		case ND_OPT_TARGET_LL_ADDR:
+			lladdr = ndisc_opt_addr_data(nd_opt, dev);
+			break;
+
+		default:
+			break;
+		}
+
+		l = nd_opt->nd_opt_len << 3;
+
+		if (ndoptlen < l || l == 0)
+			return lladdr;
+
+		if (lladdr)
+			return lladdr;
+
+		ndoptlen -= l;
+		nd_opt = ((void *)nd_opt) + l;
+	}
+
+	return lladdr;
+}
+
+static void alb_set_nd_option(struct sk_buff *skb, struct bonding *bond,
+			      struct slave *tx_slave)
+{
+	struct ipv6hdr *ip6hdr;
+	struct icmp6hdr *hdr = NULL;
+
+	if (tx_slave && tx_slave != rcu_access_pointer(bond->curr_active_slave)) {
+		if (ntohs(skb->protocol) == ETH_P_IPV6) {
+			ip6hdr = ipv6_hdr(skb);
+			if (ip6hdr->nexthdr == IPPROTO_ICMPV6) {
+				hdr = icmp6_hdr(skb);
+				if (hdr->icmp6_type ==
+				    NDISC_NEIGHBOUR_ADVERTISEMENT ||
+				     hdr->icmp6_type ==
+				     NDISC_NEIGHBOUR_SOLICITATION) {
+					alb_change_nd_option(skb, tx_slave->dev->dev_addr);
+				}
+			}
+		}
+	}
+}
+
 /************************ exported alb functions ************************/
 
 int bond_alb_initialize(struct bonding *bond, int rlb_enabled)
@@ -1415,6 +1522,7 @@ struct slave *bond_xmit_alb_slave_get(struct bonding *bond,
 	}
 	case ETH_P_IPV6: {
 		const struct ipv6hdr *ip6hdr;
+		struct icmp6hdr *hdr = NULL;
 
 		/* IPv6 doesn't really use broadcast mac address, but leave
 		 * that here just in case.
@@ -1446,6 +1554,24 @@ struct slave *bond_xmit_alb_slave_get(struct bonding *bond,
 			break;
 		}
 
+		if (ip6hdr->nexthdr == IPPROTO_ICMPV6) {
+			hdr = icmp6_hdr(skb);
+			if (hdr->icmp6_type ==
+			    NDISC_NEIGHBOUR_ADVERTISEMENT ||
+			    hdr->icmp6_type ==
+			    NDISC_NEIGHBOUR_SOLICITATION) {
+				u8 *lladdr = NULL;
+
+				lladdr = alb_get_lladdr(skb);
+				if (lladdr) {
+					if (!bond_slave_has_mac_rx(bond, lladdr)) {
+						do_tx_balance = false;
+						break;
+					}
+				}
+			}
+		}
+
 		hash_start = (char *)&ip6hdr->daddr;
 		hash_size = sizeof(ip6hdr->daddr);
 		break;
@@ -1489,6 +1615,7 @@ netdev_tx_t bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev)
 	struct slave *tx_slave = NULL;
 
 	tx_slave = bond_xmit_alb_slave_get(bond, skb);
+	alb_set_nd_option(skb, bond, tx_slave);
 	return bond_do_alb_xmit(skb, bond, tx_slave);
 }
 
-- 
1.8.3.1


             reply	other threads:[~2021-12-09  6:58 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-09  6:50 Sun Shouxin [this message]
2021-12-09 11:57 ` [PATCH] net: bonding: Add support for IPV6 ns/na kernel test robot
2021-12-09 20:22 ` Jay Vosburgh
2021-12-10  7:09   ` 孙守鑫

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1639032622-28098-1-git-send-email-sunshouxin@chinatelecom.cn \
    --to=sunshouxin@chinatelecom.cn \
    --cc=andy@greyhouse.net \
    --cc=davem@davemloft.net \
    --cc=huyd12@chinatelecom.cn \
    --cc=j.vosburgh@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=vfalico@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).