From: Balakrishna Godavarthi <bgodavar@codeaurora.org>
To: marcel@holtmann.org, johan.hedberg@gmail.com, bjorn.andersson@linaro.org
Cc: mka@chromium.org, linux-kernel@vger.kernel.org,
linux-bluetooth@vger.kernel.org, hemantg@codeaurora.org,
linux-arm-msm@vger.kernel.org, bgodavar@codeaurora.org,
rjliao@codeaurora.org, hbandi@codeaurora.org,
abhishekpandit@chromium.org, mcchou@chromium.org,
saluvala@codeaurora.org
Subject: [PATCH v4] arm64: dts: qcom: sc7280: Add bluetooth node on SC7280 IDP boards
Date: Wed, 15 Dec 2021 22:36:03 +0530 [thread overview]
Message-ID: <1639587963-22503-1-git-send-email-bgodavar@codeaurora.org> (raw)
Add bluetooth SoC WCN6750 node for SC7280 IDP boards.
Signed-off-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
---
v4:
* updated commit subject
* Removed drive strength for bt_en
* updated swctrl_gpio name to sw_ctrl
v3:
* Addressed reviewers comments
* Added pin config for sw_ctrl line.
v2:
* merged two patches into one
* Removed unused comments
* Removed pinmux & pin conf.
* Addressed reviewers comments
v1: initial patch
---
arch/arm64/boot/dts/qcom/sc7280-idp.dts | 4 ++++
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 36 ++++++++++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sc7280-idp2.dts | 4 ++++
3 files changed, 44 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index 9b991ba..19bd228 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -56,6 +56,10 @@
};
};
+&bluetooth {
+ vddio-supply = <&vreg_l19b_1p8>;
+};
+
&ipa {
status = "okay";
modem-init;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index d623d71..a146d0d 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -14,6 +14,11 @@
#include "pmk8350.dtsi"
/ {
+ aliases {
+ bluetooth0 = &bluetooth;
+ serial1 = &uart7;
+ };
+
gpio-keys {
compatible = "gpio-keys";
label = "gpio-keys";
@@ -422,6 +427,23 @@
<&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default", "sleep";
pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
+
+ bluetooth: bluetooth {
+ compatible = "qcom,wcn6750-bt";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_en>, <&sw_ctrl>;
+ enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+ swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
+ vddaon-supply = <&vreg_s7b_0p9>;
+ vddbtcxmx-supply = <&vreg_s7b_0p9>;
+ vddrfacmn-supply = <&vreg_s7b_0p9>;
+ vddrfa0p8-supply = <&vreg_s7b_0p9>;
+ vddrfa1p7-supply = <&vreg_s1b_1p8>;
+ vddrfa1p2-supply = <&vreg_s8b_1p2>;
+ vddrfa2p2-supply = <&vreg_s1c_2p2>;
+ vddasd-supply = <&vreg_l11c_2p8>;
+ max-speed = <3200000>;
+ };
};
/* PINCTRL - additions to nodes defined in sc7280.dtsi */
@@ -491,6 +513,13 @@
};
&tlmm {
+ bt_en: bt-en {
+ pins = "gpio85";
+ function = "gpio";
+ output-low;
+ bias-disable;
+ };
+
nvme_pwren: nvme-pwren {
function = "gpio";
};
@@ -554,6 +583,13 @@
*/
bias-pull-up;
};
+
+ sw_ctrl: sw-ctrl {
+ pins = "gpio86";
+ function = "gpio";
+ input-enable;
+ bias-pull-down;
+ };
};
&sdc1_on {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
index 0382c77..73b9911 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp2.dts
@@ -23,6 +23,10 @@
};
};
+&bluetooth {
+ vddio-supply = <&vreg_l18b_1p8>;
+};
+
&nvme_pwren {
pins = "gpio51";
};
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next reply other threads:[~2021-12-15 17:07 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-15 17:06 Balakrishna Godavarthi [this message]
2021-12-15 17:57 ` [PATCH v4] arm64: dts: qcom: sc7280: Add bluetooth node on SC7280 IDP boards Matthias Kaehlcke
2021-12-22 7:54 ` Marcel Holtmann
2021-12-22 16:13 ` Matthias Kaehlcke
2021-12-22 16:41 ` Bjorn Andersson
2021-12-22 22:02 ` Marcel Holtmann
2021-12-24 18:10 ` Bjorn Andersson
2022-01-13 23:59 ` Doug Anderson
2022-01-25 4:49 ` Miao-chen Chou
2022-01-31 21:09 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1639587963-22503-1-git-send-email-bgodavar@codeaurora.org \
--to=bgodavar@codeaurora.org \
--cc=abhishekpandit@chromium.org \
--cc=bjorn.andersson@linaro.org \
--cc=hbandi@codeaurora.org \
--cc=hemantg@codeaurora.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=mcchou@chromium.org \
--cc=mka@chromium.org \
--cc=rjliao@codeaurora.org \
--cc=saluvala@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).