[PATCH net-next 0/4] net/mlx5: Introduce devlink param to disable SF aux dev probe

[Moshe Shemesh <moshe@nvidia.com>]

Currently SF device has all the aux devices enabled by default. Once
loaded, user who desire to disable some of them need to perform devlink
reload. This operation helps to reclaim memory that was not supposed
to be used, but the lost time in disabling and enabling again cannot be
recovered by this approach[1].
Therefore, introduce a new devlink generic parameter for PCI PF which
controls the creation of SFs. This parameter sets a flag in order to
disable all auxiliary devices of the SF. i.e.: All children auxiliary
devices of SF for RDMA, eth and vdpa-net are disabled by default and
hence no device initialization is done at probe stage.

$ devlink dev param set pci/0000:08:00.0 name enable_sfs_aux_devs \
              value false cmode runtime

Create SF:
$ devlink port add pci/0000:08:00.0 flavour pcisf pfnum 0 sfnum 11
$ devlink port function set pci/0000:08:00.0/32768 \
               hw_addr 00:00:00:00:00:11 state active

Now depending on the use case, the user can enable specific auxiliary
device(s). For example:

$ devlink dev param set auxiliary/mlx5_core.sf.1 \
              name enable_vnet value true cmde driverinit

Afterwards, user needs to reload the SF in order for the SF to come up
with the specific configuration:

$ devlink dev reload auxiliary/mlx5_core.sf.1

[1]
mlx5 devlink reload is taking about 2 seconds, which means that with
256 SFs we are speaking about ~8.5 minutes.

Shay Drory (4):
  net/mlx5: Split function_setup() to enable and open functions
  net/mlx5: Delete redundant default assignment of runtime devlink
    params
  devlink: Add new "enable_sfs_aux_devs" generic device param
  net/mlx5: Support enable_sfs_aux_devs devlink param

 .../networking/devlink/devlink-params.rst     |   5 +
 drivers/net/ethernet/mellanox/mlx5/core/dev.c |  16 ++
 .../net/ethernet/mellanox/mlx5/core/devlink.c |  51 ++---
 .../net/ethernet/mellanox/mlx5/core/eswitch.c |   3 +
 .../net/ethernet/mellanox/mlx5/core/health.c  |   5 +-
 .../net/ethernet/mellanox/mlx5/core/main.c    | 183 +++++++++++++++---
 .../ethernet/mellanox/mlx5/core/mlx5_core.h   |   6 +
 .../mellanox/mlx5/core/sf/dev/driver.c        |  13 +-
 .../ethernet/mellanox/mlx5/core/sf/devlink.c  |  40 ++++
 .../ethernet/mellanox/mlx5/core/sf/hw_table.c |   7 +
 .../net/ethernet/mellanox/mlx5/core/sf/priv.h |   2 +
 include/linux/mlx5/driver.h                   |   1 +
 include/net/devlink.h                         |   4 +
 net/core/devlink.c                            |   5 +
 14 files changed, 284 insertions(+), 57 deletions(-)

-- 
2.26.3