linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "tip-bot2 for Mark Rutland" <tip-bot2@linutronix.de>
To: linux-tip-commits@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>,
	"Peter Zijlstra (Intel)" <peterz@infradead.org>,
	Ard Biesheuvel <ardb@kernel.org>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Frederic Weisbecker <frederic@kernel.org>,
	x86@kernel.org, linux-kernel@vger.kernel.org
Subject: [tip: sched/core] arm64: Support PREEMPT_DYNAMIC
Date: Sat, 19 Feb 2022 10:21:23 -0000	[thread overview]
Message-ID: <164526608332.16921.5809069444201168846.tip-bot2@tip-bot2> (raw)
In-Reply-To: <20220214165216.2231574-8-mark.rutland@arm.com>

The following commit has been merged into the sched/core branch of tip:

Commit-ID:     1b2d3451ee50a0968cb9933f726e50b368ba5073
Gitweb:        https://git.kernel.org/tip/1b2d3451ee50a0968cb9933f726e50b368ba5073
Author:        Mark Rutland <mark.rutland@arm.com>
AuthorDate:    Mon, 14 Feb 2022 16:52:16 
Committer:     Peter Zijlstra <peterz@infradead.org>
CommitterDate: Sat, 19 Feb 2022 11:11:09 +01:00

arm64: Support PREEMPT_DYNAMIC

This patch enables support for PREEMPT_DYNAMIC on arm64, allowing the
preemption model to be chosen at boot time.

Specifically, this patch selects HAVE_PREEMPT_DYNAMIC_KEY, so that each
preemption function is an out-of-line call with an early return
depending upon a static key. This leaves almost all the codegen up to
the compiler, and side-steps a number of pain points with static calls
(e.g. interaction with CFI schemes). This should have no worse overhead
than using non-inline static calls, as those use out-of-line trampolines
with early returns.

For example, the dynamic_cond_resched() wrapper looks as follows when
enabled. When disabled, the first `B` is replaced with a `NOP`,
resulting in an early return.

| <dynamic_cond_resched>:
|        bti     c
|        b       <dynamic_cond_resched+0x10>     // or `nop`
|        mov     w0, #0x0
|        ret
|        mrs     x0, sp_el0
|        ldr     x0, [x0, #8]
|        cbnz    x0, <dynamic_cond_resched+0x8>
|        paciasp
|        stp     x29, x30, [sp, #-16]!
|        mov     x29, sp
|        bl      <preempt_schedule_common>
|        mov     w0, #0x1
|        ldp     x29, x30, [sp], #16
|        autiasp
|        ret

... compared to the regular form of the function:

| <__cond_resched>:
|        bti     c
|        mrs     x0, sp_el0
|        ldr     x1, [x0, #8]
|        cbz     x1, <__cond_resched+0x18>
|        mov     w0, #0x0
|        ret
|        paciasp
|        stp     x29, x30, [sp, #-16]!
|        mov     x29, sp
|        bl      <preempt_schedule_common>
|        mov     w0, #0x1
|        ldp     x29, x30, [sp], #16
|        autiasp
|        ret

Since arm64 does not yet use the generic entry code, we must define our
own `sk_dynamic_irqentry_exit_cond_resched`, which will be
enabled/disabled by the common code in kernel/sched/core.c. All other
preemption functions and associated static keys are defined there.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20220214165216.2231574-8-mark.rutland@arm.com
---
 arch/arm64/Kconfig               |  1 +
 arch/arm64/include/asm/preempt.h | 19 +++++++++++++++++--
 arch/arm64/kernel/entry-common.c | 10 +++++++++-
 3 files changed, 27 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 6978140..7d0f0cd 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -192,6 +192,7 @@ config ARM64
 	select HAVE_PERF_EVENTS
 	select HAVE_PERF_REGS
 	select HAVE_PERF_USER_STACK_DUMP
+	select HAVE_PREEMPT_DYNAMIC_KEY
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_POSIX_CPU_TIMERS_TASK_WORK
 	select HAVE_FUNCTION_ARG_ACCESS_API
diff --git a/arch/arm64/include/asm/preempt.h b/arch/arm64/include/asm/preempt.h
index e83f098..0159b62 100644
--- a/arch/arm64/include/asm/preempt.h
+++ b/arch/arm64/include/asm/preempt.h
@@ -2,6 +2,7 @@
 #ifndef __ASM_PREEMPT_H
 #define __ASM_PREEMPT_H
 
+#include <linux/jump_label.h>
 #include <linux/thread_info.h>
 
 #define PREEMPT_NEED_RESCHED	BIT(32)
@@ -80,10 +81,24 @@ static inline bool should_resched(int preempt_offset)
 }
 
 #ifdef CONFIG_PREEMPTION
+
 void preempt_schedule(void);
-#define __preempt_schedule() preempt_schedule()
 void preempt_schedule_notrace(void);
-#define __preempt_schedule_notrace() preempt_schedule_notrace()
+
+#ifdef CONFIG_PREEMPT_DYNAMIC
+
+DECLARE_STATIC_KEY_TRUE(sk_dynamic_irqentry_exit_cond_resched);
+void dynamic_preempt_schedule(void);
+#define __preempt_schedule()		dynamic_preempt_schedule()
+void dynamic_preempt_schedule_notrace(void);
+#define __preempt_schedule_notrace()	dynamic_preempt_schedule_notrace()
+
+#else /* CONFIG_PREEMPT_DYNAMIC */
+
+#define __preempt_schedule()		preempt_schedule()
+#define __preempt_schedule_notrace()	preempt_schedule_notrace()
+
+#endif /* CONFIG_PREEMPT_DYNAMIC */
 #endif /* CONFIG_PREEMPTION */
 
 #endif /* __ASM_PREEMPT_H */
diff --git a/arch/arm64/kernel/entry-common.c b/arch/arm64/kernel/entry-common.c
index 2c639b6..675352e 100644
--- a/arch/arm64/kernel/entry-common.c
+++ b/arch/arm64/kernel/entry-common.c
@@ -220,9 +220,17 @@ static void noinstr arm64_exit_el1_dbg(struct pt_regs *regs)
 		lockdep_hardirqs_on(CALLER_ADDR0);
 }
 
+#ifdef CONFIG_PREEMPT_DYNAMIC
+DEFINE_STATIC_KEY_TRUE(sk_dynamic_irqentry_exit_cond_resched);
+#define need_irq_preemption() \
+	(static_branch_unlikely(&sk_dynamic_irqentry_exit_cond_resched))
+#else
+#define need_irq_preemption()	(IS_ENABLED(CONFIG_PREEMPTION))
+#endif
+
 static void __sched arm64_preempt_schedule_irq(void)
 {
-	if (!IS_ENABLED(CONFIG_PREEMPTION))
+	if (!need_irq_preemption())
 		return;
 
 	/*

  reply	other threads:[~2022-02-19 10:21 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-02-14 16:52 [PATCH v4 0/7] arm64 / sched/preempt: support PREEMPT_DYNAMIC with static keys Mark Rutland
2022-02-14 16:52 ` [PATCH v4 1/7] sched/preempt: move PREEMPT_DYNAMIC logic later Mark Rutland
2022-02-19 10:21   ` [tip: sched/core] sched/preempt: Move " tip-bot2 for Mark Rutland
2022-02-14 16:52 ` [PATCH v4 2/7] sched/preempt: refactor sched_dynamic_update() Mark Rutland
2022-02-19 10:21   ` [tip: sched/core] sched/preempt: Refactor sched_dynamic_update() tip-bot2 for Mark Rutland
2022-02-14 16:52 ` [PATCH v4 3/7] sched/preempt: simplify irqentry_exit_cond_resched() callers Mark Rutland
2022-02-19 10:21   ` [tip: sched/core] sched/preempt: Simplify " tip-bot2 for Mark Rutland
2022-02-14 16:52 ` [PATCH v4 4/7] sched/preempt: decouple HAVE_PREEMPT_DYNAMIC from GENERIC_ENTRY Mark Rutland
2022-02-19 10:21   ` [tip: sched/core] sched/preempt: Decouple " tip-bot2 for Mark Rutland
2022-02-14 16:52 ` [PATCH v4 5/7] sched/preempt: add PREEMPT_DYNAMIC using static keys Mark Rutland
2022-02-19 10:21   ` [tip: sched/core] sched/preempt: Add " tip-bot2 for Mark Rutland
2022-03-18  8:49   ` [PATCH v4 5/7] sched/preempt: add " Sven Schnelle
2022-02-14 16:52 ` [PATCH v4 6/7] arm64: entry: centralize preemption decision Mark Rutland
2022-02-19 10:21   ` [tip: sched/core] arm64: entry: Centralize " tip-bot2 for Mark Rutland
2022-02-14 16:52 ` [PATCH v4 7/7] arm64: support PREEMPT_DYNAMIC Mark Rutland
2022-02-19 10:21   ` tip-bot2 for Mark Rutland [this message]
2022-02-17 13:52 ` [PATCH v4 0/7] arm64 / sched/preempt: support PREEMPT_DYNAMIC with static keys Frederic Weisbecker
2022-02-17 18:59   ` Peter Zijlstra

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=164526608332.16921.5809069444201168846.tip-bot2@tip-bot2 \
    --to=tip-bot2@linutronix.de \
    --cc=ardb@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=frederic@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tip-commits@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=peterz@infradead.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).