From: Vincent Shih <vincent.sunplus@gmail.com>
To: gregkh@linuxfoundation.org, stern@rowland.harvard.edu,
p.zabel@pengutronix.de, davem@davemloft.net,
vladimir.oltean@nxp.com, linux-kernel@vger.kernel.org,
linux-usb@vger.kernel.org, robh+dt@kernel.org,
krzysztof.kozlowski+dt@linaro.org, devicetree@vger.kernel.org,
wells.lu@sunplus.com
Cc: Vincent Shih <vincent.sunplus@gmail.com>
Subject: [PATCH v4 2/2] dt-bindings: usb: Add bindings doc for Sunplus EHCI driver
Date: Fri, 29 Apr 2022 16:27:56 +0800 [thread overview]
Message-ID: <1651220876-26705-3-git-send-email-vincent.sunplus@gmail.com> (raw)
In-Reply-To: <1651220876-26705-1-git-send-email-vincent.sunplus@gmail.com>
Add bindings doc for Sunplus EHCI driver
Signed-off-by: Vincent Shih <vincent.sunplus@gmail.com>
---
Changes in v2:
- Address the comments from Mr. Krzysztof Kozlowski and Mr. Rob Herring
.../bindings/usb/sunplus,sp7021-usb-ehci.yaml | 79 ++++++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 80 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/sunplus,sp7021-usb-ehci.yaml
diff --git a/Documentation/devicetree/bindings/usb/sunplus,sp7021-usb-ehci.yaml b/Documentation/devicetree/bindings/usb/sunplus,sp7021-usb-ehci.yaml
new file mode 100644
index 0000000..307b018
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/sunplus,sp7021-usb-ehci.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) Sunplus Co., Ltd. 2021
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/sunplus,sp7021-usb-ehci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sunplus SP7021 EHCI Controller Device Tree Bindings
+
+allOf:
+ - $ref: usb-hcd.yaml#
+
+maintainers:
+ - Vincent Shih <vincent.sunplus@gmail.com>
+
+description:
+ Sunplus SP7021 USB HOST IP is a USB2.0 Host Controller. It supports both
+ Enhanced Host Controller Interface (EHCI) and Open Host Controller Interface
+ (OHCI).
+
+ It supports 32-bits address bus and 64bit data bus interface, compliant
+ to AMBA AXI interface for data transfer.
+
+ It supports 32-bits address and data bus interface, compliant to AMBA
+ AHB interface for register configurations.
+
+ It supports 32-bits address and data bus interface, compliant to AMBA
+ AXI interface for register alternative configurations.
+
+ The UTM Interface block generates PHY control signals, compliant to
+ USB2.0 Transceiver Macrocell Interface Specification Revision 1.0.
+
+properties:
+ compatible:
+ const: sunplus,sp7021-usb-ehci
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: uphy
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - resets
+ - interrupts
+ - phys
+ - phy-names
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ sp_ehci0: usb@9c102100 {
+ compatible = "sunplus,sp7021-usb-ehci";
+ reg = <0x9c102100 0x68>;
+ clocks = <&clkc 0x3a>;
+ resets = <&rstc 0x2a>;
+ interrupt-parent = <&intc>;
+ interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&sp_uphy0>;
+ phy-names = "uphy";
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index e103afa..a057288 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18918,6 +18918,7 @@ SUNPLUS USB EHCI DRIVER
M: Vincent Shih <vincent.sunplus@gmail.com>
L: linux-usb@vger.kernel.org
S: Maintained
+F: Documentation/devicetree/bindings/usb/sunplus,sp7021-usb-ehci.yaml
F: drivers/usb/host/ehci-sunplus.c
SUPERH
--
2.7.4
next prev parent reply other threads:[~2022-04-29 8:28 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-29 8:27 [PATCH v4 0/2] Add driver for EHCI in Sunplus SP7021 Vincent Shih
2022-04-29 8:27 ` [PATCH v4 1/2] usb: host: ehci-sunplus: Add driver for ehci " Vincent Shih
2022-04-29 12:07 ` Philipp Zabel
2022-04-29 15:37 ` Alan Stern
2022-04-30 1:26 ` Alan Stern
2022-04-29 8:27 ` Vincent Shih [this message]
2022-04-29 20:53 ` [PATCH v4 2/2] dt-bindings: usb: Add bindings doc for Sunplus EHCI driver Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1651220876-26705-3-git-send-email-vincent.sunplus@gmail.com \
--to=vincent.sunplus@gmail.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=stern@rowland.harvard.edu \
--cc=vladimir.oltean@nxp.com \
--cc=wells.lu@sunplus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).