From: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
To: <agross@kernel.org>, <bjorn.andersson@linaro.org>,
<robh+dt@kernel.org>, <linux-arm-msm@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<quic_rohkumar@quicinc.com>, <srinivas.kandagatla@linaro.org>,
<dianders@chromium.org>, <swboyd@chromium.org>,
<judyhsiao@chromium.org>
Cc: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>,
"Venkata Prasad Potturu" <quic_potturu@quicinc.com>
Subject: [PATCH v12 08/12] arm64: dts: qcom: sc7280: Add lpass cpu node
Date: Fri, 20 May 2022 17:48:40 +0530 [thread overview]
Message-ID: <1653049124-24713-9-git-send-email-quic_srivasam@quicinc.com> (raw)
In-Reply-To: <1653049124-24713-1-git-send-email-quic_srivasam@quicinc.com>
Add lpass cpu node for audio on sc7280 based platforms.
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
---
arch/arm64/boot/dts/qcom/sc7280.dtsi | 62 ++++++++++++++++++++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 1b4210d..213728f 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -22,6 +22,7 @@
#include <dt-bindings/reset/qcom,sdm845-aoss.h>
#include <dt-bindings/reset/qcom,sdm845-pdc.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/sound/qcom,lpass.h>
#include <dt-bindings/thermal/thermal.h>
/ {
@@ -2336,6 +2337,67 @@
#power-domain-cells = <1>;
};
+ lpass_cpu: audio@3987000 {
+ compatible = "qcom,sc7280-lpass-cpu";
+
+ reg = <0 0x03987000 0 0x68000>,
+ <0 0x03b00000 0 0x29000>,
+ <0 0x03260000 0 0xc000>,
+ <0 0x03280000 0 0x29000>,
+ <0 0x03340000 0 0x29000>,
+ <0 0x0336c000 0 0x3000>;
+ reg-names = "lpass-hdmiif",
+ "lpass-lpaif",
+ "lpass-rxtx-cdc-dma-lpm",
+ "lpass-rxtx-lpaif",
+ "lpass-va-lpaif",
+ "lpass-va-cdc-dma-lpm";
+
+ iommus = <&apps_smmu 0x1820 0>,
+ <&apps_smmu 0x1821 0>,
+ <&apps_smmu 0x1832 0>;
+
+ power-domains = <&rpmhpd SC7280_LCX>;
+ power-domain-names = "lcx";
+ required-opps = <&rpmhpd_opp_nom>;
+
+ clocks = <&lpass_aon LPASS_AON_CC_AUDIO_HM_H_CLK>,
+ <&lpass_audiocc LPASS_AUDIO_CC_EXT_MCLK0_CLK>,
+ <&lpasscore LPASS_CORE_CC_SYSNOC_MPORT_CORE_CLK>,
+ <&lpasscore LPASS_CORE_CC_EXT_IF0_IBIT_CLK>,
+ <&lpasscore LPASS_CORE_CC_EXT_IF1_IBIT_CLK>,
+ <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM_CLK>,
+ <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM0_CLK>,
+ <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM1_CLK>,
+ <&lpass_audiocc LPASS_AUDIO_CC_CODEC_MEM2_CLK>,
+ <&lpass_aon LPASS_AON_CC_VA_MEM0_CLK>;
+ clock-names = "aon_cc_audio_hm_h",
+ "audio_cc_ext_mclk0",
+ "core_cc_sysnoc_mport_core",
+ "core_cc_ext_if0_ibit",
+ "core_cc_ext_if1_ibit",
+ "audio_cc_codec_mem",
+ "audio_cc_codec_mem0",
+ "audio_cc_codec_mem1",
+ "audio_cc_codec_mem2",
+ "aon_cc_va_mem0";
+
+ #sound-dai-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "lpass-irq-lpaif",
+ "lpass-irq-hdmi",
+ "lpass-irq-vaif",
+ "lpass-irq-rxtxif";
+
+ status = "disabled";
+ };
+
lpass_hm: clock-controller@3c00000 {
compatible = "qcom,sc7280-lpasshm";
reg = <0 0x3c00000 0 0x28>;
--
2.7.4
next prev parent reply other threads:[~2022-05-20 12:20 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-20 12:18 [PATCH v12 00/12] Add soundcard support for sc7280 based platforms Srinivasa Rao Mandadapu
2022-05-20 12:18 ` [PATCH v12 01/12] arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs Srinivasa Rao Mandadapu
2022-05-20 12:18 ` [PATCH v12 02/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
2022-05-20 12:18 ` [PATCH v12 03/12] arm64: dts: qcom: sc7280: Enable digital codecs and soundwire for CRD 3.0/3.1 Srinivasa Rao Mandadapu
2022-05-20 12:18 ` [PATCH v12 04/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
2022-05-20 12:18 ` [PATCH v12 05/12] arm64: dts: qcom: sc7280: Add wcd9385 codec node for CRD 3.0/3.1 Srinivasa Rao Mandadapu
2022-05-20 12:18 ` [PATCH v12 06/12] arm64: dts: qcom: sc7280: Add max98360a codec for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
2022-05-20 12:18 ` [PATCH v12 07/12] arm64: dts: qcom: sc7280: herobrine: Add max98360a codec node Srinivasa Rao Mandadapu
2022-05-20 12:18 ` Srinivasa Rao Mandadapu [this message]
2022-05-20 12:18 ` [PATCH v12 09/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
2022-05-20 12:18 ` [PATCH v12 10/12] arm64: dts: qcom: sc7280: Enable lpass cpu node for CRD 3.0/3.1 Srinivasa Rao Mandadapu
2022-05-20 12:18 ` [PATCH v12 11/12] arm64: dts: qcom: sc7280: Add sound node for CRD 1.0/2.0 and IDP boards Srinivasa Rao Mandadapu
2022-05-20 12:18 ` [PATCH v12 12/12] arm64: dts: qcom: sc7280: Add sound node for CRD 3.0/3.1 Srinivasa Rao Mandadapu
2022-06-06 21:32 ` [PATCH v12 00/12] Add soundcard support for sc7280 based platforms Matthias Kaehlcke
2022-06-07 16:38 ` Srinivasa Rao Mandadapu
2022-09-13 15:04 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1653049124-24713-9-git-send-email-quic_srivasam@quicinc.com \
--to=quic_srivasam@quicinc.com \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=judyhsiao@chromium.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quic_potturu@quicinc.com \
--cc=quic_rohkumar@quicinc.com \
--cc=robh+dt@kernel.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).