From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, jslaby@suse.cz,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: Linux 5.18.11
Date: Tue, 12 Jul 2022 16:59:18 +0200 [thread overview]
Message-ID: <165763795884238@kroah.com> (raw)
I'm announcing the release of the 5.18.11 kernel.
All users of the 5.18 kernel series must upgrade.
The updated 5.18.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-5.18.y
and can be browsed at the normal kernel.org git web browser:
https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary
thanks,
greg k-h
------------
Documentation/devicetree/bindings/dma/allwinner,sun50i-a64-dma.yaml | 2
MAINTAINERS | 11
Makefile | 2
arch/arm/boot/dts/at91-sam9x60ek.dts | 3
arch/arm/boot/dts/at91-sama5d2_icp.dts | 6
arch/arm/boot/dts/stm32mp151.dtsi | 4
arch/arm/configs/mxs_defconfig | 1
arch/arm/mach-at91/pm.c | 10
arch/arm/mach-meson/platsmp.c | 2
arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 58 +-
arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts | 48 -
arch/arm64/boot/dts/qcom/msm8992-lg-bullhead.dtsi | 2
arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts | 2
arch/arm64/boot/dts/qcom/msm8994.dtsi | 4
arch/arm64/boot/dts/qcom/sdm845.dtsi | 2
arch/arm64/boot/dts/qcom/sm8450.dtsi | 4
arch/powerpc/platforms/powernv/rng.c | 16
arch/x86/kernel/acpi/cppc.c | 10
drivers/acpi/bus.c | 39 -
drivers/acpi/cppc_acpi.c | 29 -
drivers/base/core.c | 13
drivers/base/power/runtime.c | 34 -
drivers/cxl/cxlmem.h | 8
drivers/cxl/mem.c | 7
drivers/cxl/pmem.c | 6
drivers/dma/at_xdmac.c | 5
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 8
drivers/dma/idxd/device.c | 5
drivers/dma/imx-sdma.c | 4
drivers/dma/lgm/lgm-dma.c | 3
drivers/dma/pl330.c | 2
drivers/dma/qcom/bam_dma.c | 39 -
drivers/dma/ti/dma-crossbar.c | 5
drivers/i2c/busses/i2c-cadence.c | 1
drivers/i2c/busses/i2c-piix4.c | 16
drivers/iommu/intel/dmar.c | 2
drivers/iommu/intel/iommu.c | 24
drivers/iommu/intel/pasid.c | 69 --
drivers/iommu/intel/pasid.h | 1
drivers/misc/cardreader/rtsx_usb.c | 27
drivers/net/can/grcan.c | 1
drivers/net/can/m_can/m_can.c | 8
drivers/net/can/rcar/rcar_canfd.c | 5
drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c | 6
drivers/net/can/spi/mcp251xfd/mcp251xfd-regmap.c | 22
drivers/net/can/usb/gs_usb.c | 23
drivers/net/can/usb/kvaser_usb/kvaser_usb.h | 25
drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c | 285 +++++-----
drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c | 4
drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 119 ++--
drivers/net/dsa/qca8k.c | 23
drivers/net/ethernet/ibm/ibmvnic.c | 9
drivers/net/ethernet/intel/i40e/i40e.h | 16
drivers/net/ethernet/intel/i40e/i40e_main.c | 73 ++
drivers/net/ethernet/intel/i40e/i40e_register.h | 13
drivers/net/ethernet/intel/i40e/i40e_type.h | 1
drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c | 4
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 13
drivers/net/ethernet/microchip/lan966x/lan966x_main.c | 8
drivers/net/ethernet/microchip/lan966x/lan966x_main.h | 1
drivers/net/ethernet/realtek/r8169_main.c | 10
drivers/net/usb/usbnet.c | 17
drivers/pinctrl/sunxi/pinctrl-sun8i-a83t.c | 10
drivers/pinctrl/sunxi/pinctrl-sunxi.c | 2
drivers/soc/atmel/soc.c | 12
drivers/video/fbdev/core/fbcon.c | 33 +
drivers/video/fbdev/core/fbmem.c | 16
fs/fscache/cookie.c | 15
fs/fscache/volume.c | 4
fs/io_uring.c | 14
include/acpi/cppc_acpi.h | 1
include/linux/acpi.h | 4
include/linux/fbcon.h | 4
include/linux/fscache.h | 1
include/linux/intel-iommu.h | 3
include/linux/memregion.h | 2
include/linux/pm_runtime.h | 5
include/linux/rtsx_usb.h | 2
include/net/act_api.h | 3
include/net/flow_offload.h | 1
include/net/pkt_cls.h | 6
include/video/of_display_timing.h | 2
kernel/bpf/verifier.c | 113 +--
kernel/rcu/srcutree.c | 6
lib/idr.c | 3
net/can/bcm.c | 18
net/mptcp/options.c | 3
net/mptcp/pm_netlink.c | 16
net/mptcp/protocol.c | 9
net/mptcp/protocol.h | 1
net/netfilter/nf_tables_api.c | 9
net/netfilter/nft_set_pipapo.c | 48 +
net/rose/rose_route.c | 4
net/sched/act_api.c | 4
net/sched/act_csum.c | 3
net/sched/act_ct.c | 3
net/sched/act_gact.c | 3
net/sched/act_gate.c | 3
net/sched/act_mirred.c | 3
net/sched/act_mpls.c | 3
net/sched/act_pedit.c | 3
net/sched/act_police.c | 20
net/sched/act_sample.c | 3
net/sched/act_skbedit.c | 3
net/sched/act_tunnel_key.c | 3
net/sched/act_vlan.c | 3
net/sched/cls_api.c | 16
net/sched/cls_flower.c | 6
net/sched/cls_matchall.c | 6
net/xdp/xsk_buff_pool.c | 1
sound/pci/cs46xx/cs46xx.c | 22
sound/pci/hda/patch_realtek.c | 1
sound/soc/codecs/rt700.c | 16
sound/soc/codecs/rt711-sdca.c | 27
sound/soc/codecs/rt711.c | 25
sound/soc/qcom/qdsp6/q6apm-dai.c | 6
sound/soc/sof/intel/hda-pcm.c | 74 --
sound/soc/sof/intel/hda-stream.c | 94 +++
sound/soc/sof/intel/hda.h | 3
sound/soc/sof/ipc3-topology.c | 23
sound/usb/quirks.c | 4
tools/testing/selftests/net/forwarding/lib.sh | 6
tools/testing/selftests/net/udpgro.sh | 2
tools/testing/selftests/net/udpgro_bench.sh | 2
tools/testing/selftests/net/udpgro_frglist.sh | 2
tools/testing/selftests/net/udpgro_fwd.sh | 2
tools/testing/selftests/net/veth.sh | 6
127 files changed, 1178 insertions(+), 813 deletions(-)
Alison Schofield (1):
cxl/mbox: Use __le32 in get,set_lsa mailbox structures
Andrei Lalaev (1):
pinctrl: sunxi: sunxi_pconf_set: use correct offset
Caleb Connolly (1):
dmaengine: qcom: bam_dma: fix runtime PM underflow
Charles Keepax (2):
ASoC: rt711: Add endianness flag in snd_soc_component_driver
ASoC: rt711-sdca: Add endianness flag in snd_soc_component_driver
Christian Marangi (1):
net: dsa: qca8k: reset cpu port on MTU change
Christophe JAILLET (1):
dmaengine: lgm: Fix an error handling path in intel_ldma_probe()
Claudiu Beznea (3):
ARM: at91: pm: use proper compatible for sama5d2's rtc
ARM: at91: pm: use proper compatibles for sam9x60's rtc and rtt
ARM: at91: pm: use proper compatibles for sama7g5's rtc and rtt
Dan Williams (1):
memregion: Fix memregion_free() fallback definition
Daniel Borkmann (2):
bpf: Fix incorrect verifier simulation around jmp32's jeq/jne
bpf: Fix insufficient bounds propagation from adjust_scalar_min_max_vals
Dave Jiang (1):
dmaengine: idxd: force wq context cleanup on device disable path
David Howells (1):
fscache: Fix invalidation/lookup race
Dmitry Baryshkov (1):
arm64: dts: qcom: sdm845: use dispcc AHB clock for mdss node
Dmitry Osipenko (1):
dmaengine: pl330: Fix lockdep warning about non-static key
Duoming Zhou (1):
net: rose: fix UAF bug caused by rose_t0timer_expiry
Duy Nguyen (1):
can: rcar_canfd: Fix data transmission failed on R-Car V3U
Dylan Yudaken (1):
io_uring: fix provided buffer import
Emil Renner Berthing (1):
dmaengine: dw-axi-dmac: Fix RMW on channel suspend register
Eugen Hristev (2):
ARM: dts: at91: sam9x60ek: fix eeprom compatible and size
ARM: dts: at91: sama5d2_icp: fix eeprom compatibles
Fabio Estevam (1):
ARM: mxs_defconfig: Enable the framebuffer
Fabrice Gasnier (1):
ARM: dts: stm32: add missing usbh clock and fix clk order on stm32mp15
Greg Kroah-Hartman (1):
Linux 5.18.11
Guiling Deng (1):
fbdev: fbmem: Fix logo center image dx issue
Hangbin Liu (1):
selftests/net: fix section name when using xdp_dummy.o
Heiner Kallweit (1):
r8169: fix accessing unset transport header
Helge Deller (3):
fbmem: Check virtual screen sizes in fb_set_var()
fbcon: Disallow setting font bigger than screen size
fbcon: Prevent that screen size is smaller than font size
Hsin-Yi Wang (1):
video: of_display_timing.h: include errno.h
Ido Schimmel (2):
net/sched: act_api: Add extack to offload_act_setup() callback
net/sched: act_police: Add extack messages for offload failure
Ivan Malov (1):
xsk: Clear page contiguity bit when unmapping pool
Jason A. Donenfeld (1):
powerpc/powernv: delay rng platform device creation until later in boot
Jean Delvare (1):
i2c: piix4: Fix a memory leak in the EFCH MMIO support
Jimmy Assarsson (3):
can: kvaser_usb: replace run-time checks with struct kvaser_usb_driver_info
can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression
can: kvaser_usb: kvaser_usb_leaf: fix bittiming limits
Joerg Roedel (1):
MAINTAINERS: Remove iommu@lists.linux-foundation.org
Jonathan Cameron (1):
cxl: Fix cleanup of port devices on failure to probe driver.
Konrad Dybcio (1):
arm64: dts: qcom: msm8994: Fix CPU6/7 reg values
Liang He (1):
can: grcan: grcan_probe(): remove extra of_node_get()
Linus Torvalds (1):
ida: don't use BUG_ON() for debugging
Lu Baolu (1):
iommu/vt-d: Fix RID2PASID setup/teardown failure
Lukasz Cieplicki (1):
i40e: Fix dropped jumbo frames statistics
Marc Kleine-Budde (5):
can: m_can: m_can_chip_config(): actually enable internal timestamping
can: m_can: m_can_{read_fifo,echo_tx_event}(): shift timestamp to full 32 bits
can: mcp251xfd: mcp251xfd_stop(): add missing hrtimer_cancel()
can: mcp251xfd: mcp251xfd_register_get_dev_id(): use correct length to read dev_id
can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix endianness conversion
Mario Limonciello (2):
ACPI: CPPC: Only probe for _CPC if CPPC v2 is acked
ACPI: CPPC: Don't require _OSC if X86_FEATURE_CPPC is supported
Mat Martineau (2):
mptcp: Avoid acquiring PM lock for subflow priority changes
mptcp: Acquire the subflow socket lock before modifying MP_PRIO flags
Miaoqian Lin (3):
ARM: meson: Fix refcount leak in meson_smp_prepare_cpus
dmaengine: ti: Fix refcount leak in ti_dra7_xbar_route_allocate
dmaengine: ti: Add missing put_device in ti_dra7_xbar_route_allocate
Michael Walle (2):
net: lan966x: hardcode the number of external ports
dmaengine: at_xdma: handle errors of at_xdmac_alloc_desc() correctly
Mihai Sain (1):
ARM: at91: fix soc detection for SAM9X60 SiPs
Norbert Zulinski (1):
i40e: Fix VF's MAC Address change on VM
Oliver Hartkopp (1):
can: bcm: use call_rcu() instead of costly synchronize_rcu()
Oliver Neukum (1):
usbnet: fix memory leak in error case
Pablo Neira Ayuso (2):
netfilter: nft_set_pipapo: release elements in clone from abort path
netfilter: nf_tables: stricter validation of element data
Paolo Abeni (1):
mptcp: fix local endpoint accounting
Paul E. McKenney (1):
srcu: Tighten cleanup_srcu_struct() GP checks
Peng Fan (10):
arm64: dts: imx8mp-evk: correct mmc pad settings
arm64: dts: imx8mp-evk: correct gpio-led pad settings
arm64: dts: imx8mp-evk: correct vbus pad settings
arm64: dts: imx8mp-evk: correct eqos pad settings
arm64: dts: imx8mp-evk: correct I2C5 pad settings
arm64: dts: imx8mp-evk: correct I2C1 pad settings
arm64: dts: imx8mp-evk: correct I2C3 pad settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct uart pad settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct eqos pad settings
arm64: dts: imx8mp-phyboard-pollux-rdk: correct i2c2 & mmc settings
Peter Robinson (1):
dmaengine: imx-sdma: Allow imx8m for imx7 FW revs
Peter Ujfalusi (2):
ASoC: SOF: ipc3-topology: Move and correct size checks in sof_ipc3_control_load_bytes()
ASoC: SOF: Intel: hda: Fix compressed stream position tracking
Pierre Gondois (2):
ACPI: CPPC: Check _OSC for flexible address space
ACPI: bus: Set CPPC _OSC bits for all and when CPPC_LIB is supported
Pierre-Louis Bossart (1):
ASoC: codecs: rt700/rt711/rt711-sdca: resume bus/codec in .set_jack_detect
Rafael J. Wysocki (2):
PM: runtime: Redefine pm_runtime_release_supplier()
PM: runtime: Fix supplier device management during consumer probe
Rhett Aultman (1):
can: gs_usb: gs_usb_open/close(): fix memory leak
Rick Lindsley (1):
ibmvnic: Properly dispose of all skbs during a failover.
Samuel Holland (2):
pinctrl: sunxi: a83t: Fix NAND function name for some pins
dt-bindings: dma: allwinner,sun50i-a64-dma: Fix min/max typo
Sascha Hauer (1):
dmaengine: imx-sdma: only restart cyclic channel when enabled
Satish Nagireddy (1):
i2c: cadence: Unregister the clk notifier in error path
Sherry Sun (1):
arm64: dts: imx8mp-evk: correct the uart2 pinctl value
Shuah Khan (3):
misc: rtsx_usb: fix use of dma mapped buffer for usb bulk transfer
misc: rtsx_usb: use separate command and response buffers
misc: rtsx_usb: set return value in rsp_buf alloc err path
Srinivas Kandagatla (1):
ASoC: qdsp6: q6apm-dai: unprepare stream if its already prepared
Stephan Gerhold (1):
arm64: dts: qcom: msm8992-*: Fix vdd_lvs1_2-supply typo
Takashi Iwai (2):
ALSA: usb-audio: Workarounds for Behringer UMC 204/404 HD
ALSA: cs46xx: Fix missing snd_card_free() call at probe error
Thomas Kopp (2):
can: mcp251xfd: mcp251xfd_regmap_crc_read(): improve workaround handling for mcp2517fd
can: mcp251xfd: mcp251xfd_regmap_crc_read(): update workaround broken CRC on TBC register
Tim Crawford (1):
ALSA: hda/realtek: Add quirk for Clevo L140PU
Vlad Buslov (2):
net/mlx5e: Fix matchall police parameters validation
net/sched: act_police: allow 'continue' action offload
Vladimir Oltean (3):
selftests: forwarding: fix flood_unicast_test when h2 supports IFF_UNICAST_FLT
selftests: forwarding: fix learning_test when h1 supports IFF_UNICAST_FLT
selftests: forwarding: fix error message in learning_test
Vladimir Zapolskiy (1):
arm64: dts: qcom: sm8450: fix interconnects property of UFS node
Yian Chen (1):
iommu/vt-d: Fix PCI bus rescan device hot add
Yue Hu (1):
fscache: Fix if condition in fscache_wait_on_volume_collision()
next reply other threads:[~2022-07-12 15:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-12 14:59 Greg Kroah-Hartman [this message]
2022-07-12 14:59 ` Linux 5.18.11 Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=165763795884238@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).