From: Babu Moger <babu.moger@amd.com>
To: <corbet@lwn.net>, <reinette.chatre@intel.com>,
<tglx@linutronix.de>, <mingo@redhat.com>, <bp@alien8.de>
Cc: <fenghua.yu@intel.com>, <dave.hansen@linux.intel.com>,
<x86@kernel.org>, <hpa@zytor.com>, <paulmck@kernel.org>,
<akpm@linux-foundation.org>, <quic_neeraju@quicinc.com>,
<rdunlap@infradead.org>, <damien.lemoal@opensource.wdc.com>,
<songmuchun@bytedance.com>, <peterz@infradead.org>,
<jpoimboe@kernel.org>, <pbonzini@redhat.com>,
<babu.moger@amd.com>, <chang.seok.bae@intel.com>,
<pawan.kumar.gupta@linux.intel.com>, <jmattson@google.com>,
<daniel.sneddon@linux.intel.com>, <sandipan.das@amd.com>,
<tony.luck@intel.com>, <james.morse@arm.com>,
<linux-doc@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<bagasdotme@gmail.com>, <eranian@google.com>,
<christophe.leroy@csgroup.eu>,
<pawan.kumar.gupta@linux.intel.com>, <jarkko@kernel.org>,
<adrian.hunter@intel.com>, <quic_jiles@quicinc.com>,
<peternewman@google.com>, <babu.moger@amd.com>
Subject: [PATCH v3 3/7] x86/resctrl: Rename rftype flags for consistency
Date: Thu, 2 Mar 2023 14:24:39 -0600 [thread overview]
Message-ID: <167778867966.1053859.17317446376632380238.stgit@bmoger-ubuntu> (raw)
In-Reply-To: <167778850105.1053859.14596357862185564029.stgit@bmoger-ubuntu>
The rftype flags have two different prefixes even though they are used
for the same purpose. Change the prefix to RFTYPE_ for all the flags.
Signed-off-by: Babu Moger <babu.moger@amd.com>
---
arch/x86/kernel/cpu/resctrl/internal.h | 8 +++---
arch/x86/kernel/cpu/resctrl/rdtgroup.c | 42 ++++++++++++++++----------------
2 files changed, 25 insertions(+), 25 deletions(-)
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index 571145d75d29..2cfc3c431d5b 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -248,10 +248,10 @@ struct rdtgroup {
#define RFTYPE_TOP BIT(6)
#define RFTYPE_RES_CACHE BIT(8)
#define RFTYPE_RES_MB BIT(9)
-#define RF_CTRL_INFO (RFTYPE_INFO | RFTYPE_CTRL)
-#define RF_MON_INFO (RFTYPE_INFO | RFTYPE_MON)
-#define RF_TOP_INFO (RFTYPE_INFO | RFTYPE_TOP)
-#define RF_CTRL_BASE (RFTYPE_BASE | RFTYPE_CTRL)
+#define RFTYPE_CTRL_INFO (RFTYPE_INFO | RFTYPE_CTRL)
+#define RFTYPE_MON_INFO (RFTYPE_INFO | RFTYPE_MON)
+#define RFTYPE_TOP_INFO (RFTYPE_INFO | RFTYPE_TOP)
+#define RFTYPE_CTRL_BASE (RFTYPE_BASE | RFTYPE_CTRL)
/* List of all resource groups */
extern struct list_head rdt_all_groups;
diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
index 3c86506e54c1..fc7d1e778bff 100644
--- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
+++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
@@ -1691,77 +1691,77 @@ static struct rftype res_common_files[] = {
.mode = 0444,
.kf_ops = &rdtgroup_kf_single_ops,
.seq_show = rdt_last_cmd_status_show,
- .fflags = RF_TOP_INFO,
+ .fflags = RFTYPE_TOP_INFO,
},
{
.name = "num_closids",
.mode = 0444,
.kf_ops = &rdtgroup_kf_single_ops,
.seq_show = rdt_num_closids_show,
- .fflags = RF_CTRL_INFO,
+ .fflags = RFTYPE_CTRL_INFO,
},
{
.name = "mon_features",
.mode = 0444,
.kf_ops = &rdtgroup_kf_single_ops,
.seq_show = rdt_mon_features_show,
- .fflags = RF_MON_INFO,
+ .fflags = RFTYPE_MON_INFO,
},
{
.name = "num_rmids",
.mode = 0444,
.kf_ops = &rdtgroup_kf_single_ops,
.seq_show = rdt_num_rmids_show,
- .fflags = RF_MON_INFO,
+ .fflags = RFTYPE_MON_INFO,
},
{
.name = "cbm_mask",
.mode = 0444,
.kf_ops = &rdtgroup_kf_single_ops,
.seq_show = rdt_default_ctrl_show,
- .fflags = RF_CTRL_INFO | RFTYPE_RES_CACHE,
+ .fflags = RFTYPE_CTRL_INFO | RFTYPE_RES_CACHE,
},
{
.name = "min_cbm_bits",
.mode = 0444,
.kf_ops = &rdtgroup_kf_single_ops,
.seq_show = rdt_min_cbm_bits_show,
- .fflags = RF_CTRL_INFO | RFTYPE_RES_CACHE,
+ .fflags = RFTYPE_CTRL_INFO | RFTYPE_RES_CACHE,
},
{
.name = "shareable_bits",
.mode = 0444,
.kf_ops = &rdtgroup_kf_single_ops,
.seq_show = rdt_shareable_bits_show,
- .fflags = RF_CTRL_INFO | RFTYPE_RES_CACHE,
+ .fflags = RFTYPE_CTRL_INFO | RFTYPE_RES_CACHE,
},
{
.name = "bit_usage",
.mode = 0444,
.kf_ops = &rdtgroup_kf_single_ops,
.seq_show = rdt_bit_usage_show,
- .fflags = RF_CTRL_INFO | RFTYPE_RES_CACHE,
+ .fflags = RFTYPE_CTRL_INFO | RFTYPE_RES_CACHE,
},
{
.name = "min_bandwidth",
.mode = 0444,
.kf_ops = &rdtgroup_kf_single_ops,
.seq_show = rdt_min_bw_show,
- .fflags = RF_CTRL_INFO | RFTYPE_RES_MB,
+ .fflags = RFTYPE_CTRL_INFO | RFTYPE_RES_MB,
},
{
.name = "bandwidth_gran",
.mode = 0444,
.kf_ops = &rdtgroup_kf_single_ops,
.seq_show = rdt_bw_gran_show,
- .fflags = RF_CTRL_INFO | RFTYPE_RES_MB,
+ .fflags = RFTYPE_CTRL_INFO | RFTYPE_RES_MB,
},
{
.name = "delay_linear",
.mode = 0444,
.kf_ops = &rdtgroup_kf_single_ops,
.seq_show = rdt_delay_linear_show,
- .fflags = RF_CTRL_INFO | RFTYPE_RES_MB,
+ .fflags = RFTYPE_CTRL_INFO | RFTYPE_RES_MB,
},
/*
* Platform specific which (if any) capabilities are provided by
@@ -1780,7 +1780,7 @@ static struct rftype res_common_files[] = {
.kf_ops = &rdtgroup_kf_single_ops,
.write = max_threshold_occ_write,
.seq_show = max_threshold_occ_show,
- .fflags = RF_MON_INFO | RFTYPE_RES_CACHE,
+ .fflags = RFTYPE_MON_INFO | RFTYPE_RES_CACHE,
},
{
.name = "mbm_total_bytes_config",
@@ -1827,7 +1827,7 @@ static struct rftype res_common_files[] = {
.kf_ops = &rdtgroup_kf_single_ops,
.write = rdtgroup_schemata_write,
.seq_show = rdtgroup_schemata_show,
- .fflags = RF_CTRL_BASE,
+ .fflags = RFTYPE_CTRL_BASE,
},
{
.name = "mode",
@@ -1835,14 +1835,14 @@ static struct rftype res_common_files[] = {
.kf_ops = &rdtgroup_kf_single_ops,
.write = rdtgroup_mode_write,
.seq_show = rdtgroup_mode_show,
- .fflags = RF_CTRL_BASE,
+ .fflags = RFTYPE_CTRL_BASE,
},
{
.name = "size",
.mode = 0444,
.kf_ops = &rdtgroup_kf_single_ops,
.seq_show = rdtgroup_size_show,
- .fflags = RF_CTRL_BASE,
+ .fflags = RFTYPE_CTRL_BASE,
},
};
@@ -1899,7 +1899,7 @@ void __init thread_throttle_mode_init(void)
if (!rft)
return;
- rft->fflags = RF_CTRL_INFO | RFTYPE_RES_MB;
+ rft->fflags = RFTYPE_CTRL_INFO | RFTYPE_RES_MB;
}
void __init mbm_config_rftype_init(const char *config)
@@ -1908,7 +1908,7 @@ void __init mbm_config_rftype_init(const char *config)
rft = rdtgroup_get_rftype_by_name(config);
if (rft)
- rft->fflags = RF_MON_INFO | RFTYPE_RES_CACHE;
+ rft->fflags = RFTYPE_MON_INFO | RFTYPE_RES_CACHE;
}
/**
@@ -2043,21 +2043,21 @@ static int rdtgroup_create_info_dir(struct kernfs_node *parent_kn)
if (IS_ERR(kn_info))
return PTR_ERR(kn_info);
- ret = rdtgroup_add_files(kn_info, RF_TOP_INFO);
+ ret = rdtgroup_add_files(kn_info, RFTYPE_TOP_INFO);
if (ret)
goto out_destroy;
/* loop over enabled controls, these are all alloc_capable */
list_for_each_entry(s, &resctrl_schema_all, list) {
r = s->res;
- fflags = r->fflags | RF_CTRL_INFO;
+ fflags = r->fflags | RFTYPE_CTRL_INFO;
ret = rdtgroup_mkdir_info_resdir(s, s->name, fflags);
if (ret)
goto out_destroy;
}
for_each_mon_capable_rdt_resource(r) {
- fflags = r->fflags | RF_MON_INFO;
+ fflags = r->fflags | RFTYPE_MON_INFO;
sprintf(name, "%s_MON", r->name);
ret = rdtgroup_mkdir_info_resdir(r, name, fflags);
if (ret)
@@ -3554,7 +3554,7 @@ static int __init rdtgroup_setup_root(void)
list_add(&rdtgroup_default.rdtgroup_list, &rdt_all_groups);
- ret = rdtgroup_add_files(kernfs_root_to_node(rdt_root), RF_CTRL_BASE);
+ ret = rdtgroup_add_files(kernfs_root_to_node(rdt_root), RFTYPE_CTRL_BASE);
if (ret) {
kernfs_destroy_root(rdt_root);
goto out;
next prev parent reply other threads:[~2023-03-02 20:25 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-02 20:24 [PATCH v3 0/7] x86/resctrl: Miscellaneous resctrl features Babu Moger
2023-03-02 20:24 ` [PATCH v3 1/7] x86/resctrl: Add multiple tasks to the resctrl group at once Babu Moger
2023-03-15 18:32 ` Reinette Chatre
2023-03-16 16:27 ` Moger, Babu
2023-03-16 17:12 ` Reinette Chatre
2023-03-16 19:51 ` Moger, Babu
2023-03-16 20:33 ` Reinette Chatre
2023-03-20 15:07 ` Moger, Babu
2023-03-20 15:15 ` Moger, Babu
2023-03-20 16:52 ` Reinette Chatre
2023-03-20 18:29 ` Moger, Babu
2023-03-02 20:24 ` [PATCH v3 2/7] x86/resctrl: Remove few unnecessary rftype flags Babu Moger
2023-03-15 18:33 ` Reinette Chatre
2023-03-16 20:31 ` Moger, Babu
2023-03-16 20:41 ` Reinette Chatre
2023-03-16 21:11 ` Moger, Babu
2023-03-16 21:17 ` Reinette Chatre
2023-03-20 13:35 ` Moger, Babu
2023-03-02 20:24 ` Babu Moger [this message]
2023-03-02 20:24 ` [PATCH v3 4/7] x86/resctrl: Re-arrange RFTYPE flags based on hierarchy Babu Moger
2023-03-15 18:37 ` Reinette Chatre
2023-03-21 15:54 ` Moger, Babu
2023-03-22 18:46 ` Reinette Chatre
2023-03-02 20:24 ` [PATCH v3 5/7] x86/resctrl: Display the RMID and COSID for resctrl groups Babu Moger
2023-03-15 18:42 ` Reinette Chatre
2023-03-20 16:52 ` Moger, Babu
2023-03-20 17:00 ` Reinette Chatre
2023-03-20 17:10 ` James Morse
2023-03-20 19:53 ` Moger, Babu
2023-03-20 20:59 ` Stephane Eranian
2023-03-22 13:49 ` Moger, Babu
2023-03-02 20:25 ` [PATCH v3 6/7] x86/resctrl: Introduce -o debug mount option Babu Moger
2023-03-15 18:43 ` Reinette Chatre
2023-03-22 14:01 ` Moger, Babu
2023-03-02 20:25 ` [PATCH v3 7/7] x86/resctrl: Add debug files when mounted with debug option Babu Moger
2023-03-15 18:45 ` Reinette Chatre
2023-03-22 15:09 ` Moger, Babu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=167778867966.1053859.17317446376632380238.stgit@bmoger-ubuntu \
--to=babu.moger@amd.com \
--cc=adrian.hunter@intel.com \
--cc=akpm@linux-foundation.org \
--cc=bagasdotme@gmail.com \
--cc=bp@alien8.de \
--cc=chang.seok.bae@intel.com \
--cc=christophe.leroy@csgroup.eu \
--cc=corbet@lwn.net \
--cc=damien.lemoal@opensource.wdc.com \
--cc=daniel.sneddon@linux.intel.com \
--cc=dave.hansen@linux.intel.com \
--cc=eranian@google.com \
--cc=fenghua.yu@intel.com \
--cc=hpa@zytor.com \
--cc=james.morse@arm.com \
--cc=jarkko@kernel.org \
--cc=jmattson@google.com \
--cc=jpoimboe@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=paulmck@kernel.org \
--cc=pawan.kumar.gupta@linux.intel.com \
--cc=pbonzini@redhat.com \
--cc=peternewman@google.com \
--cc=peterz@infradead.org \
--cc=quic_jiles@quicinc.com \
--cc=quic_neeraju@quicinc.com \
--cc=rdunlap@infradead.org \
--cc=reinette.chatre@intel.com \
--cc=sandipan.das@amd.com \
--cc=songmuchun@bytedance.com \
--cc=tglx@linutronix.de \
--cc=tony.luck@intel.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).