From: Finn Thain <fthain@telegraphics.com.au>
To: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
Chris Zankel <chris@zankel.net>,
Laurent Vivier <laurent@vivier.eu>,
Geert Uytterhoeven <geert@linux-m68k.org>,
Eric Dumazet <eric.dumazet@gmail.com>,
Stephen Hemminger <stephen@networkplumber.org>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH net v3 11/12] net/sonic: Fix CAM initialization
Date: Thu, 23 Jan 2020 09:07:26 +1100 [thread overview]
Message-ID: <16c5c444451ae30a6b64d41a48851ec9cafbe003.1579730846.git.fthain@telegraphics.com.au> (raw)
In-Reply-To: <cover.1579730846.git.fthain@telegraphics.com.au>
Section 4.3.1 of the datasheet says,
This bit [TXP] must not be set if a Load CAM operation is in
progress (LCAM is set). The SONIC will lock up if both bits are
set simultaneously.
Testing has shown that the driver sometimes attempts to set LCAM
while TXP is set. Avoid this by waiting for command completion
before and after giving the LCAM command.
After issuing the Load CAM command, poll for !SONIC_CR_LCAM rather than
SONIC_INT_LCD, because the SONIC_CR_TXP bit can't be used until
!SONIC_CR_LCAM.
When in reset mode, take the opportunity to reset the CAM Enable
register.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
---
Changed since v2:
- Finish conversion to spin_lock_irqsave/spin_unlock_irqrestore.
---
drivers/net/ethernet/natsemi/sonic.c | 21 ++++++++++++---------
1 file changed, 12 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/natsemi/sonic.c b/drivers/net/ethernet/natsemi/sonic.c
index 914cec2ccc28..27b6f6585527 100644
--- a/drivers/net/ethernet/natsemi/sonic.c
+++ b/drivers/net/ethernet/natsemi/sonic.c
@@ -634,6 +634,8 @@ static void sonic_multicast_list(struct net_device *dev)
(netdev_mc_count(dev) > 15)) {
rcr |= SONIC_RCR_AMC;
} else {
+ unsigned long flags;
+
netif_dbg(lp, ifup, dev, "%s: mc_count %d\n", __func__,
netdev_mc_count(dev));
sonic_set_cam_enable(dev, 1); /* always enable our own address */
@@ -647,9 +649,14 @@ static void sonic_multicast_list(struct net_device *dev)
i++;
}
SONIC_WRITE(SONIC_CDC, 16);
- /* issue Load CAM command */
SONIC_WRITE(SONIC_CDP, lp->cda_laddr & 0xffff);
+
+ /* LCAM and TXP commands can't be used simultaneously */
+ spin_lock_irqsave(&lp->lock, flags);
+ sonic_quiesce(dev, SONIC_CR_TXP);
SONIC_WRITE(SONIC_CMD, SONIC_CR_LCAM);
+ sonic_quiesce(dev, SONIC_CR_LCAM);
+ spin_unlock_irqrestore(&lp->lock, flags);
}
}
@@ -675,6 +682,9 @@ static int sonic_init(struct net_device *dev)
SONIC_WRITE(SONIC_ISR, 0x7fff);
SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
+ /* While in reset mode, clear CAM Enable register */
+ SONIC_WRITE(SONIC_CE, 0);
+
/*
* clear software reset flag, disable receiver, clear and
* enable interrupts, then completely initialize the SONIC
@@ -785,14 +795,7 @@ static int sonic_init(struct net_device *dev)
* load the CAM
*/
SONIC_WRITE(SONIC_CMD, SONIC_CR_LCAM);
-
- i = 0;
- while (i++ < 100) {
- if (SONIC_READ(SONIC_ISR) & SONIC_INT_LCD)
- break;
- }
- netif_dbg(lp, ifup, dev, "%s: CMD=%x, ISR=%x, i=%d\n", __func__,
- SONIC_READ(SONIC_CMD), SONIC_READ(SONIC_ISR), i);
+ sonic_quiesce(dev, SONIC_CR_LCAM);
/*
* enable receiver, disable loopback
--
2.24.1
next prev parent reply other threads:[~2020-01-22 22:24 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-22 22:07 [PATCH net v3 00/12] Fixes for SONIC ethernet driver Finn Thain
2020-01-22 22:07 ` [PATCH net v3 10/12] net/sonic: Fix command register usage Finn Thain
2020-01-22 22:07 ` [PATCH net v3 04/12] net/sonic: Fix interface error stats collection Finn Thain
2020-01-22 22:07 ` [PATCH net v3 08/12] net/sonic: Fix receive buffer replenishment Finn Thain
2020-01-22 22:07 ` [PATCH net v3 02/12] net/sonic: Clear interrupt flags immediately Finn Thain
2020-01-22 22:07 ` [PATCH net v3 06/12] net/sonic: Avoid needless receive descriptor EOL flag updates Finn Thain
2020-01-22 22:07 ` [PATCH net v3 03/12] net/sonic: Use MMIO accessors Finn Thain
2020-01-22 22:07 ` Finn Thain [this message]
2020-01-22 22:07 ` [PATCH net v3 12/12] net/sonic: Prevent tx watchdog timeout Finn Thain
2020-01-22 22:07 ` [PATCH net v3 09/12] net/sonic: Quiesce SONIC before re-initializing descriptor memory Finn Thain
2020-01-22 22:07 ` [PATCH net v3 07/12] net/sonic: Improve receive descriptor status flag check Finn Thain
2020-01-22 22:07 ` [PATCH net v3 01/12] net/sonic: Add mutual exclusion for accessing shared state Finn Thain
2020-01-22 22:07 ` [PATCH net v3 05/12] net/sonic: Fix receive buffer handling Finn Thain
2020-01-23 20:24 ` [PATCH net v3 00/12] Fixes for SONIC ethernet driver David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=16c5c444451ae30a6b64d41a48851ec9cafbe003.1579730846.git.fthain@telegraphics.com.au \
--to=fthain@telegraphics.com.au \
--cc=chris@zankel.net \
--cc=davem@davemloft.net \
--cc=eric.dumazet@gmail.com \
--cc=geert@linux-m68k.org \
--cc=laurent@vivier.eu \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=stephen@networkplumber.org \
--cc=tsbogend@alpha.franken.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).