LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Syed Nayyar Waris <syednwaris@gmail.com>
To: linus.walleij@linaro.org, akpm@linux-foundation.org
Cc: andriy.shevchenko@linux.intel.com, vilhelm.gray@gmail.com,
	arnd@arndb.de, linux-arch@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v7 1/4] bitops: Introduce the the for_each_set_clump macro
Date: Sun, 24 May 2020 10:31:58 +0530
Message-ID: <17cb2b080b9c4c36cf84436bc5690739590acc53.1590017578.git.syednwaris@gmail.com> (raw)
In-Reply-To: <cover.1590017578.git.syednwaris@gmail.com>

This macro iterates for each group of bits (clump) with set bits,
within a bitmap memory region. For each iteration, "start" is set to
the bit offset of the found clump, while the respective clump value is
stored to the location pointed by "clump". Additionally, the
bitmap_get_value and bitmap_set_value functions are introduced to
respectively get and set a value of n-bits in a bitmap memory region.
The n-bits can have any size less than or equal to BITS_PER_LONG.
Moreover, during setting value of n-bit in bitmap, if a situation arise
that the width of next n-bit is exceeding the word boundary, then it
will divide itself such that some portion of it is stored in that word,
while the remaining portion is stored in the next higher word. Similar
situation occurs while retrieving value of n-bits from bitmap.

Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Syed Nayyar Waris <syednwaris@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
---
Changes in v7:
 - No change.

Changes in v6:
 - No change.

Changes in v5:
 - No change.

Changes in v4:
 - No change.

Changes in v3:
 - No change.

Changes in v2:
 - No change.

 include/asm-generic/bitops/find.h | 19 ++++++++++
 include/linux/bitmap.h            | 61 +++++++++++++++++++++++++++++++
 include/linux/bitops.h            | 13 +++++++
 lib/find_bit.c                    | 14 +++++++
 4 files changed, 107 insertions(+)

diff --git a/include/asm-generic/bitops/find.h b/include/asm-generic/bitops/find.h
index 9fdf21302fdf..4e6600759455 100644
--- a/include/asm-generic/bitops/find.h
+++ b/include/asm-generic/bitops/find.h
@@ -97,4 +97,23 @@ extern unsigned long find_next_clump8(unsigned long *clump,
 #define find_first_clump8(clump, bits, size) \
 	find_next_clump8((clump), (bits), (size), 0)
 
+/**
+ * find_next_clump - find next clump with set bits in a memory region
+ * @clump: location to store copy of found clump
+ * @addr: address to base the search on
+ * @size: bitmap size in number of bits
+ * @offset: bit offset at which to start searching
+ * @clump_size: clump size in bits
+ *
+ * Returns the bit offset for the next set clump; the found clump value is
+ * copied to the location pointed by @clump. If no bits are set, returns @size.
+ */
+extern unsigned long find_next_clump(unsigned long *clump,
+				      const unsigned long *addr,
+				      unsigned long size, unsigned long offset,
+				      unsigned long clump_size);
+
+#define find_first_clump(clump, bits, size, clump_size) \
+	find_next_clump((clump), (bits), (size), 0, (clump_size))
+
 #endif /*_ASM_GENERIC_BITOPS_FIND_H_ */
diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h
index 99058eb81042..7ab2c65fc964 100644
--- a/include/linux/bitmap.h
+++ b/include/linux/bitmap.h
@@ -75,7 +75,11 @@
  *  bitmap_from_arr32(dst, buf, nbits)          Copy nbits from u32[] buf to dst
  *  bitmap_to_arr32(buf, src, nbits)            Copy nbits from buf to u32[] dst
  *  bitmap_get_value8(map, start)               Get 8bit value from map at start
+ *  bitmap_get_value(map, start, nbits)		Get bit value of size
+ *						'nbits' from map at start
  *  bitmap_set_value8(map, value, start)        Set 8bit value to map at start
+ *  bitmap_set_value(map, value, start, nbits)	Set bit value of size 'nbits'
+ *						of map at start
  *
  * Note, bitmap_zero() and bitmap_fill() operate over the region of
  * unsigned longs, that is, bits behind bitmap till the unsigned long
@@ -563,6 +567,34 @@ static inline unsigned long bitmap_get_value8(const unsigned long *map,
 	return (map[index] >> offset) & 0xFF;
 }
 
+/**
+ * bitmap_get_value - get a value of n-bits from the memory region
+ * @map: address to the bitmap memory region
+ * @start: bit offset of the n-bit value
+ * @nbits: size of value in bits
+ *
+ * Returns value of nbits located at the @start bit offset within the @map
+ * memory region.
+ */
+static inline unsigned long bitmap_get_value(const unsigned long *map,
+					      unsigned long start,
+					      unsigned long nbits)
+{
+	const size_t index = BIT_WORD(start);
+	const unsigned long offset = start % BITS_PER_LONG;
+	const unsigned long ceiling = roundup(start + 1, BITS_PER_LONG);
+	const unsigned long space = ceiling - start;
+	unsigned long value_low, value_high;
+
+	if (space >= nbits)
+		return (map[index] >> offset) & GENMASK(nbits - 1, 0);
+	else {
+		value_low = map[index] & BITMAP_FIRST_WORD_MASK(start);
+		value_high = map[index + 1] & BITMAP_LAST_WORD_MASK(start + nbits);
+		return (value_low >> offset) | (value_high << space);
+	}
+}
+
 /**
  * bitmap_set_value8 - set an 8-bit value within a memory region
  * @map: address to the bitmap memory region
@@ -579,6 +611,35 @@ static inline void bitmap_set_value8(unsigned long *map, unsigned long value,
 	map[index] |= value << offset;
 }
 
+/**
+ * bitmap_set_value - set n-bit value within a memory region
+ * @map: address to the bitmap memory region
+ * @value: value of nbits
+ * @start: bit offset of the n-bit value
+ * @nbits: size of value in bits
+ */
+static inline void bitmap_set_value(unsigned long *map,
+				    unsigned long value,
+				    unsigned long start, unsigned long nbits)
+{
+	const size_t index = BIT_WORD(start);
+	const unsigned long offset = start % BITS_PER_LONG;
+	const unsigned long ceiling = roundup(start + 1, BITS_PER_LONG);
+	const unsigned long space = ceiling - start;
+
+	value &= GENMASK(nbits - 1, 0);
+
+	if (space >= nbits) {
+		map[index] &= ~(GENMASK(nbits + offset - 1, offset));
+		map[index] |= value << offset;
+	} else {
+		map[index] &= ~BITMAP_FIRST_WORD_MASK(start);
+		map[index] |= value << offset;
+		map[index + 1] &= ~BITMAP_LAST_WORD_MASK(start + nbits);
+		map[index + 1] |= (value >> space);
+	}
+}
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* __LINUX_BITMAP_H */
diff --git a/include/linux/bitops.h b/include/linux/bitops.h
index 9acf654f0b19..41c2d9ce63e7 100644
--- a/include/linux/bitops.h
+++ b/include/linux/bitops.h
@@ -62,6 +62,19 @@ extern unsigned long __sw_hweight64(__u64 w);
 	     (start) < (size); \
 	     (start) = find_next_clump8(&(clump), (bits), (size), (start) + 8))
 
+/**
+ * for_each_set_clump - iterate over bitmap for each clump with set bits
+ * @start: bit offset to start search and to store the current iteration offset
+ * @clump: location to store copy of current 8-bit clump
+ * @bits: bitmap address to base the search on
+ * @size: bitmap size in number of bits
+ * @clump_size: clump size in bits
+ */
+#define for_each_set_clump(start, clump, bits, size, clump_size) \
+	for ((start) = find_first_clump(&(clump), (bits), (size), (clump_size)); \
+	     (start) < (size); \
+	     (start) = find_next_clump(&(clump), (bits), (size), (start) + (clump_size), (clump_size)))
+
 static inline int get_bitmask_order(unsigned int count)
 {
 	int order;
diff --git a/lib/find_bit.c b/lib/find_bit.c
index 49f875f1baf7..1341bd39b32a 100644
--- a/lib/find_bit.c
+++ b/lib/find_bit.c
@@ -190,3 +190,17 @@ unsigned long find_next_clump8(unsigned long *clump, const unsigned long *addr,
 	return offset;
 }
 EXPORT_SYMBOL(find_next_clump8);
+
+unsigned long find_next_clump(unsigned long *clump, const unsigned long *addr,
+			       unsigned long size, unsigned long offset,
+			       unsigned long clump_size)
+{
+	offset = find_next_bit(addr, size, offset);
+	if (offset == size)
+		return size;
+
+	offset = rounddown(offset, clump_size);
+	*clump = bitmap_get_value(addr, offset, clump_size);
+	return offset;
+}
+EXPORT_SYMBOL(find_next_clump);
-- 
2.26.2


  reply index

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-24  5:00 [PATCH v7 0/4] Introduce " Syed Nayyar Waris
2020-05-24  5:01 ` Syed Nayyar Waris [this message]
2020-05-24 14:44   ` [PATCH v7 1/4] bitops: Introduce the " kbuild test robot
2020-05-29 18:08     ` Syed Nayyar Waris
2020-05-29 18:38       ` Andy Shevchenko
2020-05-29 20:02         ` Syed Nayyar Waris
2020-05-29 21:31           ` William Breathitt Gray
2020-05-29 21:53             ` Syed Nayyar Waris
2020-05-29 21:42           ` Andy Shevchenko
2020-05-29 22:07             ` Andy Shevchenko
2020-05-29 22:11             ` Syed Nayyar Waris
2020-05-29 22:19               ` Andy Shevchenko
2020-05-30  8:45                 ` Syed Nayyar Waris
2020-05-30  9:20                   ` Andy Shevchenko
2020-05-31  1:11                     ` Syed Nayyar Waris
2020-05-31 11:00                       ` Andy Shevchenko
2020-05-31 22:37                         ` Rikard Falkeborn
2020-06-01  0:31                           ` Syed Nayyar Waris
2020-05-24  5:04 ` [PATCH v7 2/4] lib/test_bitmap.c: Add for_each_set_clump test cases Syed Nayyar Waris
2020-05-30 19:20   ` kbuild test robot
2020-05-24  5:05 ` [PATCH v7 3/4] gpio: thunderx: Utilize for_each_set_clump macro Syed Nayyar Waris
2020-05-24  5:06 ` [PATCH v7 4/4] gpio: xilinx: " Syed Nayyar Waris
2020-05-25  9:36 ` [PATCH v7 0/4] Introduce the " Bartosz Golaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=17cb2b080b9c4c36cf84436bc5690739590acc53.1590017578.git.syednwaris@gmail.com \
    --to=syednwaris@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=arnd@arndb.de \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=vilhelm.gray@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lore.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lore.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lore.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lore.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lore.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lore.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lore.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lore.kernel.org/lkml/8 lkml/git/8.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lore.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git