* Asmedia USB 1343 crashes
@ 2017-05-01 13:40 Thomas Fjellstrom
2017-05-01 14:54 ` Alan Stern
2017-05-02 15:43 ` David Laight
0 siblings, 2 replies; 12+ messages in thread
From: Thomas Fjellstrom @ 2017-05-01 13:40 UTC (permalink / raw)
To: linux-usb; +Cc: LKML
I've got a 970 Pro gaming aura motherboard with an Asmedia 1343 Usb 3.1
controller. It's been consistently throwing errors and eventually crashing and
becomming unresponsive.
Even just plugging in one device to the rear port will eventually cause the
controller to die. Usually only takes a few hours for it to completely die.
One of the errors that shows up consistently is:
usbfs: process did not claim interface 0 before use
Later on, devices start to throw errors and eventually everything goes away.
A little while ago, I disabled usb autosuspend and things seem to be behaving.
I'm currently running 4.11-rc7 but the issue appeared on several earlier
kernels as well.
--
Thomas Fjellstrom
thomas@fjellstrom.ca
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Asmedia USB 1343 crashes
2017-05-01 13:40 Asmedia USB 1343 crashes Thomas Fjellstrom
@ 2017-05-01 14:54 ` Alan Stern
2017-05-01 16:20 ` Thomas Fjellstrom
2017-05-02 15:43 ` David Laight
1 sibling, 1 reply; 12+ messages in thread
From: Alan Stern @ 2017-05-01 14:54 UTC (permalink / raw)
To: Thomas Fjellstrom; +Cc: linux-usb, LKML
On Mon, 1 May 2017, Thomas Fjellstrom wrote:
> I've got a 970 Pro gaming aura motherboard with an Asmedia 1343 Usb 3.1
> controller. It's been consistently throwing errors and eventually crashing and
> becomming unresponsive.
Maybe if you posted a kernel log showing those errors, people would
have a better idea of what's causing your problems.
> Even just plugging in one device to the rear port will eventually cause the
> controller to die. Usually only takes a few hours for it to completely die.
>
>
> One of the errors that shows up consistently is:
>
> usbfs: process did not claim interface 0 before use
This warning message is not related to the Asmedia controller. It
refers to some program running on the computer, and the same message
would appear no matter what sort of controller was being used.
Alan Stern
> Later on, devices start to throw errors and eventually everything goes away.
>
> A little while ago, I disabled usb autosuspend and things seem to be behaving.
>
> I'm currently running 4.11-rc7 but the issue appeared on several earlier
> kernels as well.
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Asmedia USB 1343 crashes
2017-05-01 14:54 ` Alan Stern
@ 2017-05-01 16:20 ` Thomas Fjellstrom
2017-05-01 17:57 ` Alan Stern
0 siblings, 1 reply; 12+ messages in thread
From: Thomas Fjellstrom @ 2017-05-01 16:20 UTC (permalink / raw)
To: Alan Stern; +Cc: linux-usb, LKML
On Monday, May 1, 2017 10:54:12 AM MDT Alan Stern wrote:
> On Mon, 1 May 2017, Thomas Fjellstrom wrote:
> > I've got a 970 Pro gaming aura motherboard with an Asmedia 1343 Usb 3.1
> > controller. It's been consistently throwing errors and eventually crashing
> > and becomming unresponsive.
>
> Maybe if you posted a kernel log showing those errors, people would
> have a better idea of what's causing your problems.
I was going to, but it seems I lost my previous log. I've searched through the
system logs and haven't found a good clean set of logs, but I'll post what I
have (at end of message), and later re-test with autosuspend on.
> > Even just plugging in one device to the rear port will eventually cause
> > the
> > controller to die. Usually only takes a few hours for it to completely
> > die.
> >
> >
> > One of the errors that shows up consistently is:
> >
> > usbfs: process did not claim interface 0 before use
>
> This warning message is not related to the Asmedia controller. It
> refers to some program running on the computer, and the same message
> would appear no matter what sort of controller was being used.
Ah. I figured since it was a kernel message, it was directly connected to the
issues.
> Alan Stern
>
[snip]
[ 0.000000] Linux version 4.11.0-rc7 (moose@natasha) (gcc version 6.3.0 20170316 (Debian 6.3.0-9) ) #6 SMP PREEMPT Tue Apr 18 21:11:50 MDT 2017
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.11.0-rc7 root=/dev/mapper/natasha--vg-root ro radeon.dpm=0 amdgpu.dpm=0 panic=0 quiet resume=/dev/mapper/natasha--vg-swap_1
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ba4b2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ba4b3000-0x00000000ba8f7fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ba8f8000-0x00000000ba907fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000ba908000-0x00000000bb70afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bb70b000-0x00000000bc9c0fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bc9c1000-0x00000000bca34fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000bca35000-0x00000000bca35fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bca36000-0x00000000bcc3bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bcc3c000-0x00000000bd082fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bd083000-0x00000000bd7f3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bd7f4000-0x00000000bd7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000083effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.10 by American Megatrends
[ 0.000000] efi: ACPI=0xba8ff000 ACPI 2.0=0xba8ff000 SMBIOS=0xf04c0
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./970 PRO GAMING/AURA, BIOS 0901 11/07/2016
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x83f000 max_arch_pfn = 0x400000000
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xbd800 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x36365000-0x371a9fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000BA8FF000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000BA8FF078 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BA905F08 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170119/tbfadt-658)
[ 0.000000] ACPI: DSDT 0x00000000BA8FF170 006D93 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BB705F80 000040
[ 0.000000] ACPI: APIC 0x00000000BA906018 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000BA9060B8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x00000000BA906100 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000BA906140 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: IVRS 0x00000000BA907920 0000C8 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: BGRT 0x00000000BA9061D0 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000BA906208 001714 (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000083effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x83effa000-0x83effdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000083effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ba4b2fff]
[ 0.000000] node 0: [mem 0x00000000bca35000-0x00000000bca35fff]
[ 0.000000] node 0: [mem 0x00000000bcc3c000-0x00000000bd082fff]
[ 0.000000] node 0: [mem 0x00000000bd7f4000-0x00000000bd7fffff]
[ 0.000000] node 0: [mem 0x0000000100001000-0x000000083effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000083effffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba4b3000-0xba8f7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba8f8000-0xba907fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba908000-0xbb70afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbb70b000-0xbc9c0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbc9c1000-0xbca34fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbca36000-0xbcc3bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd083000-0xbd7f3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.000000] e820: [mem 0xbd800000-0xf7ffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 36 pages/cpu @ffff96213ec00000 s109144 r8192 d30120 u262144
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 8231462
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.11.0-rc7 root=/dev/mapper/natasha--vg-root ro radeon.dpm=0 amdgpu.dpm=0 panic=0 quiet resume=/dev/mapper/natasha--vg-swap_1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
[ 0.000000] Memory: 32608456K/33448596K available (6371K kernel code, 885K rwdata, 1960K rodata, 1096K init, 596K bss, 840140K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU debugfs-based tracing is enabled.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:4352 nr_irqs:1032 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.001000] tsc: Detected 4815.889 MHz processor
[ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 9631.77 BogoMIPS (lpj=4815889)
[ 0.001000] pid_max: default: 32768 minimum: 301
[ 0.001000] ACPI: Core revision 20170119
[ 0.003325] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.004014] Security Framework initialized
[ 0.005883] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.012011] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.014764] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.014783] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.015086] CPU: Physical Processor ID: 0
[ 0.015086] CPU: Processor Core ID: 0
[ 0.015087] mce: CPU supports 7 MCE banks
[ 0.015091] LVT offset 1 assigned for vector 0xf9
[ 0.015095] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.015095] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.015327] Freeing SMP alternatives memory: 28K
[ 0.020472] smpboot: Max logical packages: 1
[ 0.022218] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.033000] smpboot: CPU0: AMD FX(tm)-8320 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[ 0.036017] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.036021] ... version: 0
[ 0.036021] ... bit width: 48
[ 0.036021] ... generic registers: 6
[ 0.036022] ... value mask: 0000ffffffffffff
[ 0.036022] ... max period: 00007fffffffffff
[ 0.036022] ... fixed-purpose events: 0
[ 0.036023] ... event mask: 000000000000003f
[ 0.042007] smp: Bringing up secondary CPUs ...
[ 0.049024] x86: Booting SMP configuration:
[ 0.049025] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.518019] smp: Brought up 1 node, 8 CPUs
[ 0.518019] smpboot: Total of 8 processors activated (77047.02 BogoMIPS)
[ 0.519080] sched_clock: Marking stable (519000000, 0)->(915424157, -396424157)
[ 0.519973] devtmpfs: initialized
[ 0.520119] PM: Registering ACPI NVS region [mem 0xba908000-0xbb70afff] (14692352 bytes)
[ 0.520243] PM: Registering ACPI NVS region [mem 0xbca36000-0xbcc3bfff] (2121728 bytes)
[ 0.520316] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.520325] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.520373] pinctrl core: initialized pinctrl subsystem
[ 0.520380] kworker/u16:0 (51) used greatest stack depth: 14032 bytes left
[ 0.520399] RTC time: 20:22:15, date: 04/18/17
[ 0.520464] NET: Registered protocol family 16
[ 0.520631] cpuidle: using governor ladder
[ 0.520673] cpuidle: using governor menu
[ 0.520675] PCCT header not found.
[ 0.520759] ACPI: bus type PCI registered
[ 0.520816] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.520818] PCI: not using MMCONFIG
[ 0.520818] PCI: Using configuration type 1 for base access
[ 0.520819] PCI: Using configuration type 1 for extended access
[ 0.522254] kworker/u16:2 (240) used greatest stack depth: 14000 bytes left
[ 0.522261] kworker/u16:1 (203) used greatest stack depth: 13824 bytes left
[ 0.523004] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.523005] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.523192] ACPI: Added _OSI(Module Device)
[ 0.523192] ACPI: Added _OSI(Processor Device)
[ 0.523193] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.523193] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.523342] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.525699] ACPI : EC: EC started
[ 0.525700] ACPI : EC: interrupt blocked
[ 0.525704] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
[ 0.525705] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.525707] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions
[ 0.525707] ACPI: Interpreter enabled
[ 0.525719] ACPI: (supports S0 S3 S4 S5)
[ 0.525719] ACPI: Using IOAPIC for interrupt routing
[ 0.525821] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.525848] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.525856] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.529708] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.529711] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.529714] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.529805] PCI host bridge to bus 0000:00
[ 0.529806] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.529807] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.529808] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.529809] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.529809] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.529810] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.529811] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[ 0.529812] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.530050] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.530130] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.530211] pci 0000:00:06.0: System wakeup disabled by ACPI
[ 0.530291] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 0.530520] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.530644] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.530747] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.530871] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.531089] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.531260] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.531360] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.531463] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.531587] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.534973] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.537971] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.540972] pci 0000:00:06.0: PCI bridge to [bus 03]
[ 0.543960] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.544030] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
[ 0.544300] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.544344] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.544390] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.544435] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
[ 0.544471] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[ 0.544500] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[ 0.544527] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[ 0.544555] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[ 0.544661] ACPI : EC: interrupt unblocked
[ 0.544666] ACPI : EC: event unblocked
[ 0.544671] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.544671] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.544736] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.544738] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.544739] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.544739] vgaarb: loaded
[ 0.544776] SCSI subsystem initialized
[ 0.544820] ACPI: bus type USB registered
[ 0.544838] usbcore: registered new interface driver usbfs
[ 0.544848] usbcore: registered new interface driver hub
[ 0.544875] usbcore: registered new device driver usb
[ 0.544897] pps_core: LinuxPPS API ver. 1 registered
[ 0.544897] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.544902] PTP clock support registered
[ 0.544984] Registered efivars operations
[ 0.556747] PCI: Using ACPI for IRQ routing
[ 0.563079] NetLabel: Initializing
[ 0.563080] NetLabel: domain hash size = 128
[ 0.563080] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.563089] NetLabel: unlabeled traffic allowed by default
[ 0.563122] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.563124] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.565170] clocksource: Switched to clocksource hpet
[ 0.570476] VFS: Disk quotas dquot_6.6.0
[ 0.570487] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.570539] pnp: PnP ACPI init
[ 0.570607] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.570780] system 00:01: [io 0x040b] has been reserved
[ 0.570781] system 00:01: [io 0x04d6] has been reserved
[ 0.570782] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.570783] system 00:01: [io 0x0c14] has been reserved
[ 0.570785] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.570786] system 00:01: [io 0x0c52] has been reserved
[ 0.570787] system 00:01: [io 0x0c6c] has been reserved
[ 0.570787] system 00:01: [io 0x0c6f] has been reserved
[ 0.570788] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.570789] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.570790] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.570791] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.570792] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.570792] system 00:01: [io 0x0800-0x089f] has been reserved
[ 0.570793] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.570794] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.570795] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.570796] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.570797] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.570798] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.570799] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.570800] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.570801] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.570802] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 0.570804] system 00:01: [mem 0xff800000-0xffffffff] has been reserved
[ 0.570898] system 00:02: [io 0x0290-0x02af] has been reserved
[ 0.570956] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.571223] system 00:07: [mem 0xfeb20000-0xfeb23fff] could not be reserved
[ 0.571292] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 0.571371] pnp: PnP ACPI: found 9 devices
[ 0.577603] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.577624] pci 0000:00:03.0: PCI bridge to [bus 01]
[ 0.577626] pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
[ 0.577628] pci 0000:00:03.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.577629] pci 0000:00:03.0: bridge window [mem 0xc0000000-0xd07fffff 64bit pref]
[ 0.577631] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.577633] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.577636] pci 0000:00:06.0: PCI bridge to [bus 03]
[ 0.577637] pci 0000:00:06.0: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.577640] pci 0000:00:07.0: PCI bridge to [bus 04]
[ 0.577641] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.577642] pci 0000:00:07.0: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.577645] pci 0000:00:14.4: PCI bridge to [bus 05]
[ 0.577710] NET: Registered protocol family 2
[ 0.577853] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.578226] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.578387] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.578429] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.578528] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.578647] NET: Registered protocol family 1
[ 0.837363] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.837573] Unpacking initramfs...
[ 0.985027] Freeing initrd memory: 14612K
[ 0.985402] iommu: Adding device 0000:00:00.0 to group 0
[ 0.985454] iommu: Adding device 0000:00:03.0 to group 1
[ 0.985504] iommu: Adding device 0000:00:04.0 to group 2
[ 0.985554] iommu: Adding device 0000:00:06.0 to group 3
[ 0.985606] iommu: Adding device 0000:00:07.0 to group 4
[ 0.985655] iommu: Adding device 0000:00:11.0 to group 5
[ 0.985717] iommu: Adding device 0000:00:12.0 to group 6
[ 0.985727] iommu: Adding device 0000:00:12.2 to group 6
[ 0.985784] iommu: Adding device 0000:00:13.0 to group 7
[ 0.985795] iommu: Adding device 0000:00:13.2 to group 7
[ 0.985847] iommu: Adding device 0000:00:14.0 to group 8
[ 0.985905] iommu: Adding device 0000:00:14.2 to group 9
[ 0.985954] iommu: Adding device 0000:00:14.3 to group 10
[ 0.986020] iommu: Adding device 0000:00:14.4 to group 11
[ 0.986071] iommu: Adding device 0000:00:14.5 to group 12
[ 0.986128] iommu: Adding device 0000:00:16.0 to group 13
[ 0.986140] iommu: Adding device 0000:00:16.2 to group 13
[ 0.986236] iommu: Adding device 0000:01:00.0 to group 14
[ 0.986257] iommu: Adding device 0000:01:00.1 to group 14
[ 0.986313] iommu: Adding device 0000:02:00.0 to group 15
[ 0.986368] iommu: Adding device 0000:03:00.0 to group 16
[ 0.986426] iommu: Adding device 0000:04:00.0 to group 17
[ 1.063261] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 1.063261] AMD-Vi: Interrupt remapping enabled
[ 1.063324] AMD-Vi: Lazy IO/TLB flushing enabled
[ 1.064333] perf: AMD NB counters detected
[ 1.064516] LVT offset 0 assigned for vector 0x400
[ 1.064594] perf: AMD IBS detected (0x000000ff)
[ 1.065283] Scanning for low memory corruption every 60 seconds
[ 1.065547] audit: initializing netlink subsys (disabled)
[ 1.065580] audit: type=2000 audit(1492546935.064:1): state=initialized audit_enabled=0 res=1
[ 1.065799] workingset: timestamp_bits=40 max_order=23 bucket_order=0
[ 1.068767] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.068808] io scheduler noop registered
[ 1.068808] io scheduler deadline registered (default)
[ 1.068832] io scheduler cfq registered
[ 1.068832] io scheduler mq-deadline registered
[ 1.069138] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.069140] ACPI: Power Button [PWRB]
[ 1.069163] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.069164] ACPI: Power Button [PWRF]
[ 1.069692] GHES: HEST is not enabled!
[ 1.069751] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.090285] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.090661] Non-volatile memory driver v1.3
[ 1.092679] loop: module loaded
[ 1.092827] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[ 1.092829] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.093196] scsi host0: ahci
[ 1.093285] scsi host1: ahci
[ 1.093372] scsi host2: ahci
[ 1.093457] scsi host3: ahci
[ 1.093484] ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
[ 1.093485] ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
[ 1.093487] ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19
[ 1.093489] ata4: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b280 irq 19
[ 1.093580] i8042: PNP: No PS/2 controller found.
[ 1.093631] mousedev: PS/2 mouse device common for all mice
[ 1.093714] rtc_cmos 00:03: RTC can wake from S4
[ 1.093791] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.093815] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.093823] EFI Variables Facility v0.08 2004-May-17
[ 1.108162] pstore: using zlib compression
[ 1.108163] pstore: Registered efi as persistent store backend
[ 1.108173] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.108235] usbcore: registered new interface driver usbhid
[ 1.108236] usbhid: USB HID core driver
[ 1.108292] Netfilter messages via NETLINK v0.30.
[ 1.108327] Initializing XFRM netlink socket
[ 1.108329] NET: Registered protocol family 17
[ 1.108335] Key type dns_resolver registered
[ 1.108826] microcode: CPU0: patch_level=0x06000822
[ 1.108832] microcode: CPU1: patch_level=0x06000822
[ 1.108836] microcode: CPU2: patch_level=0x06000822
[ 1.108840] microcode: CPU3: patch_level=0x06000822
[ 1.108844] microcode: CPU4: patch_level=0x06000822
[ 1.108850] microcode: CPU5: patch_level=0x06000822
[ 1.108856] microcode: CPU6: patch_level=0x06000822
[ 1.108861] microcode: CPU7: patch_level=0x06000822
[ 1.108882] microcode: Microcode Update Driver: v2.2.
[ 1.108978] registered taskstats version 1
[ 1.109715] Magic number: 13:285:397
[ 1.109731] mem random: hash matches
[ 1.109747] console [netcon0] enabled
[ 1.109747] netconsole: network logging started
[ 1.109793] rtc_cmos 00:03: setting system clock to 2017-04-18 20:22:16 UTC (1492546936)
[ 1.109906] acpi_cpufreq: overriding BIOS provided _PSD data
[ 1.552277] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.552297] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.552323] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.552349] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.552570] ata2.00: supports DRM functions and may not be fully accessible
[ 1.553101] ata3.00: ATA-9: SanDisk SD7SB7S512G1122, X3540000, max UDMA/133
[ 1.553103] ata3.00: 1000215216 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.553299] ata2.00: ATA-9: Samsung SSD 850 EVO 250GB, EMT02B6Q, max UDMA/133
[ 1.553302] ata2.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.553787] ata2.00: supports DRM functions and may not be fully accessible
[ 1.554544] ata2.00: configured for UDMA/133
[ 1.554788] ata3.00: configured for UDMA/133
[ 1.554814] ata4.00: ATA-8: SAMSUNG SSD PM810 2.5" 256GB, AXM08D1Q, max UDMA/133
[ 1.554819] ata4.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.556283] ata4.00: configured for UDMA/133
[ 1.564512] ata1.00: ATA-8: KINGSTON SH103S3240G, 501ABBF0, max UDMA/133
[ 1.564516] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.574413] ata1.00: configured for UDMA/133
[ 1.574717] scsi 0:0:0:0: Direct-Access ATA KINGSTON SH103S3 BBF0 PQ: 0 ANSI: 5
[ 1.575438] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 1.575474] sd 0:0:0:0: [sda] Write Protect is off
[ 1.575500] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
[ 1.575537] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.575992] sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 1.576033] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.576070] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.576218] scsi 2:0:0:0: Direct-Access ATA SanDisk SD7SB7S5 0000 PQ: 0 ANSI: 5
[ 1.576418] sda: sda1
[ 1.576806] scsi 3:0:0:0: Direct-Access ATA SAMSUNG SSD PM81 8D1Q PQ: 0 ANSI: 5
[ 1.576819] sd 2:0:0:0: [sdc] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
[ 1.576853] sd 2:0:0:0: [sdc] Write Protect is off
[ 1.576928] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.577362] sd 3:0:0:0: [sdd] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 1.577389] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.577400] sd 3:0:0:0: [sdd] Write Protect is off
[ 1.577485] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.578008] sdb: sdb1 sdb2 sdb3
[ 1.578558] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.579232] sdc: sdc1
[ 1.579847] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 1.580053] sdd: sdd1 sdd2 sdd3 sdd4
[ 1.580710] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 1.583474] Freeing unused kernel memory: 1096K
[ 1.583476] Write protecting the kernel read-only data: 10240k
[ 1.584560] Freeing unused kernel memory: 1800K
[ 1.585057] Freeing unused kernel memory: 88K
[ 1.607334] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.607478] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.607498] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.607522] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.609256] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.609316] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.612068] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.612184] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.612330] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.612447] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.670172] Linux agpgart interface v0.103
[ 1.673161] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.673283] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[ 1.674277] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 1.674279] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.682514] [drm] amdgpu kernel modesetting enabled.
[ 1.683758] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.684123] ehci-pci: EHCI PCI platform driver
[ 1.684276] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.686258] [drm] initializing kernel modesetting (HAWAII 0x1002:0x67B1 0x1462:0x2015 0x80).
[ 1.686272] [drm] register mmio base: 0xFEA00000
[ 1.686273] [drm] register mmio size: 262144
[ 1.686280] [drm] doorbell mmio base: 0xD0000000
[ 1.686281] [drm] doorbell mmio size: 8388608
[ 1.686288] [drm] probing gen 2 caps for device 1002:5a17 = 131cc82/0
[ 1.686290] [drm] probing mlw for device 1002:5a17 = 131cc82
[ 1.724088] [drm] BIOS signature incorrect 68 55
[ 1.724143] ATOM BIOS: 113
[ 1.724153] [drm] GPU post is not needed
[ 1.724396] amdgpu 0000:01:00.0: VRAM: 8192M 0x0000000000000000 - 0x00000001FFFFFFFF (8192M used)
[ 1.724397] amdgpu 0000:01:00.0: GTT: 8192M 0x0000000200000000 - 0x00000003FFFFFFFF
[ 1.724401] [drm] Detected VRAM RAM=8192M, BAR=256M
[ 1.724401] [drm] RAM width 512bits GDDR5
[ 1.724463] [TTM] Zone kernel: Available graphics memory: 16456532 kiB
[ 1.724464] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 1.724464] [TTM] Initializing pool allocator
[ 1.724468] [TTM] Initializing DMA pool allocator
[ 1.724486] [drm] amdgpu: 8192M of VRAM memory ready
[ 1.724486] [drm] amdgpu: 8192M of GTT memory ready.
[ 1.724495] [drm] GART: num cpu pages 2097152, num gpu pages 2097152
[ 1.732197] xhci_hcd 0000:02:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x00000010
[ 1.732583] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.732584] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.732587] usb usb1: Product: xHCI Host Controller
[ 1.732589] usb usb1: Manufacturer: Linux 4.11.0-rc7 xhci-hcd
[ 1.732592] usb usb1: SerialNumber: 0000:02:00.0
[ 1.732808] hub 1-0:1.0: USB hub found
[ 1.732819] hub 1-0:1.0: 2 ports detected
[ 1.732942] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 1.732957] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.733003] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
[ 1.733006] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.733013] ehci-pci 0000:00:12.2: debug port 1
[ 1.733046] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
[ 1.733138] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[ 1.733162] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.733178] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.733179] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.733180] usb usb2: Product: xHCI Host Controller
[ 1.733180] usb usb2: Manufacturer: Linux 4.11.0-rc7 xhci-hcd
[ 1.733181] usb usb2: SerialNumber: 0000:02:00.0
[ 1.733279] hub 2-0:1.0: USB hub found
[ 1.733286] hub 2-0:1.0: 2 ports detected
[ 1.739233] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.739259] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.739260] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.739261] usb usb3: Product: EHCI Host Controller
[ 1.739261] usb usb3: Manufacturer: Linux 4.11.0-rc7 ehci_hcd
[ 1.739262] usb usb3: SerialNumber: 0000:00:12.2
[ 1.739375] hub 3-0:1.0: USB hub found
[ 1.739380] hub 3-0:1.0: 5 ports detected
[ 1.739495] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.739543] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4
[ 1.799910] xhci_hcd 0000:03:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010
[ 1.800072] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.800073] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.800074] usb usb4: Product: xHCI Host Controller
[ 1.800075] usb usb4: Manufacturer: Linux 4.11.0-rc7 xhci-hcd
[ 1.800075] usb usb4: SerialNumber: 0000:03:00.0
[ 1.800153] hub 4-0:1.0: USB hub found
[ 1.800158] hub 4-0:1.0: 2 ports detected
[ 1.800222] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.800229] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.800256] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5
[ 1.800261] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 6
[ 1.800262] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.800273] ehci-pci 0000:00:13.2: debug port 1
[ 1.800299] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.800305] ehci-pci 0000:00:13.2: irq 21, io mem 0xfeb07000
[ 1.800319] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.800320] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.800320] usb usb5: Product: xHCI Host Controller
[ 1.800321] usb usb5: Manufacturer: Linux 4.11.0-rc7 xhci-hcd
[ 1.800322] usb usb5: SerialNumber: 0000:03:00.0
[ 1.800385] hub 5-0:1.0: USB hub found
[ 1.800390] hub 5-0:1.0: 2 ports detected
[ 1.807258] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.807284] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.807285] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.807285] usb usb6: Product: EHCI Host Controller
[ 1.807286] usb usb6: Manufacturer: Linux 4.11.0-rc7 ehci_hcd
[ 1.807287] usb usb6: SerialNumber: 0000:00:13.2
[ 1.807366] hub 6-0:1.0: USB hub found
[ 1.807370] hub 6-0:1.0: 5 ports detected
[ 1.807510] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 1.807519] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
[ 1.807754] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 1.807895] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.807930] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7
[ 1.807932] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.807941] ehci-pci 0000:00:16.2: debug port 1
[ 1.807974] ehci-pci 0000:00:16.2: irq 23, io mem 0xfeb04000
[ 1.814304] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.814384] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.814387] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.814390] usb usb7: Product: EHCI Host Controller
[ 1.814392] usb usb7: Manufacturer: Linux 4.11.0-rc7 ehci_hcd
[ 1.814394] usb usb7: SerialNumber: 0000:00:16.2
[ 1.814581] hub 7-0:1.0: USB hub found
[ 1.814593] hub 7-0:1.0: 4 ports detected
[ 1.815474] ohci-pci: OHCI PCI platform driver
[ 1.815612] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.815683] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8
[ 1.815719] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
[ 1.871367] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.871371] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.871374] usb usb8: Product: OHCI PCI host controller
[ 1.871376] usb usb8: Manufacturer: Linux 4.11.0-rc7 ohci_hcd
[ 1.871378] usb usb8: SerialNumber: 0000:00:12.0
[ 1.871568] hub 8-0:1.0: USB hub found
[ 1.871582] hub 8-0:1.0: 5 ports detected
[ 1.871996] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.872068] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9
[ 1.872110] ohci-pci 0000:00:13.0: irq 20, io mem 0xfeb08000
[ 1.886138] [drm] PCIE GART of 8192M enabled (table at 0x0000000000040000).
[ 1.886160] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.886160] [drm] Driver supports precise vblank timestamp query.
[ 1.886189] amdgpu 0000:01:00.0: amdgpu: using MSI.
[ 1.886200] [drm] amdgpu: irq initialized.
[ 1.886377] [drm] AMDGPU Display Connectors
[ 1.886378] [drm] Connector 0:
[ 1.886378] [drm] DP-1
[ 1.886378] [drm] HPD2
[ 1.886379] [drm] DDC: 0x194c 0x194c 0x194d 0x194d 0x194e 0x194e 0x194f 0x194f
[ 1.886379] [drm] Encoders:
[ 1.886380] [drm] DFP1: INTERNAL_UNIPHY2
[ 1.886380] [drm] Connector 1:
[ 1.886380] [drm] HDMI-A-1
[ 1.886380] [drm] HPD3
[ 1.886381] [drm] DDC: 0x1954 0x1954 0x1955 0x1955 0x1956 0x1956 0x1957 0x1957
[ 1.886381] [drm] Encoders:
[ 1.886382] [drm] DFP2: INTERNAL_UNIPHY2
[ 1.886382] [drm] Connector 2:
[ 1.886382] [drm] DVI-D-1
[ 1.886382] [drm] HPD1
[ 1.886383] [drm] DDC: 0x1958 0x1958 0x1959 0x1959 0x195a 0x195a 0x195b 0x195b
[ 1.886383] [drm] Encoders:
[ 1.886384] [drm] DFP3: INTERNAL_UNIPHY1
[ 1.886384] [drm] Connector 3:
[ 1.886384] [drm] DVI-D-2
[ 1.886384] [drm] HPD6
[ 1.886385] [drm] DDC: 0x1960 0x1960 0x1961 0x1961 0x1962 0x1962 0x1963 0x1963
[ 1.886385] [drm] Encoders:
[ 1.886385] [drm] DFP4: INTERNAL_UNIPHY
[ 1.886535] amdgpu 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000200000010, cpu addr 0xffff9621168de010
[ 1.886651] amdgpu 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000200000020, cpu addr 0xffff9621168de020
[ 1.886705] amdgpu 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000200000030, cpu addr 0xffff9621168de030
[ 1.886784] amdgpu 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000200000040, cpu addr 0xffff9621168de040
[ 1.886847] amdgpu 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000200000050, cpu addr 0xffff9621168de050
[ 1.886899] amdgpu 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000200000060, cpu addr 0xffff9621168de060
[ 1.886989] amdgpu 0000:01:00.0: fence driver on ring 6 use gpu addr 0x0000000200000070, cpu addr 0xffff9621168de070
[ 1.887048] amdgpu 0000:01:00.0: fence driver on ring 7 use gpu addr 0x0000000200000080, cpu addr 0xffff9621168de080
[ 1.887095] amdgpu 0000:01:00.0: fence driver on ring 8 use gpu addr 0x0000000200000090, cpu addr 0xffff9621168de090
[ 1.887177] amdgpu 0000:01:00.0: fence driver on ring 9 use gpu addr 0x00000002000000a0, cpu addr 0xffff9621168de0a0
[ 1.887244] amdgpu 0000:01:00.0: fence driver on ring 10 use gpu addr 0x00000002000000b0, cpu addr 0xffff9621168de0b0
[ 1.887321] [drm] Found UVD firmware Version: 1.64 Family ID: 9
[ 1.887805] amdgpu 0000:01:00.0: fence driver on ring 11 use gpu addr 0x000000000108bd30, cpu addr 0xffffa3ad04a38d30
[ 1.887845] [drm] Found VCE firmware Version: 50.10 Binary ID: 2
[ 1.887937] amdgpu 0000:01:00.0: fence driver on ring 12 use gpu addr 0x00000002000000d0, cpu addr 0xffff9621168de0d0
[ 1.888046] amdgpu 0000:01:00.0: fence driver on ring 13 use gpu addr 0x00000002000000e0, cpu addr 0xffff9621168de0e0
[ 1.888091] [drm] PCIE gen 2 link speeds already enabled
[ 1.891173] [drm] ring test on 0 succeeded in 16 usecs
[ 1.891330] [drm] ring test on 1 succeeded in 3 usecs
[ 1.891355] [drm] ring test on 2 succeeded in 13 usecs
[ 1.891381] [drm] ring test on 3 succeeded in 13 usecs
[ 1.891406] [drm] ring test on 4 succeeded in 13 usecs
[ 1.891433] [drm] ring test on 5 succeeded in 14 usecs
[ 1.891458] [drm] ring test on 6 succeeded in 13 usecs
[ 1.891485] [drm] ring test on 7 succeeded in 14 usecs
[ 1.891510] [drm] ring test on 8 succeeded in 13 usecs
[ 1.891608] [drm] ring test on 9 succeeded in 6 usecs
[ 1.891613] [drm] ring test on 10 succeeded in 5 usecs
[ 1.906315] pps pps0: new PPS source ptp0
[ 1.906320] igb 0000:04:00.0: added PHC on eth0
[ 1.906322] igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 1.906325] igb 0000:04:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 9c:5c:8e:7b:c8:67
[ 1.906328] igb 0000:04:00.0: eth0: PBA No: FFFFFF-0FF
[ 1.906331] igb 0000:04:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
[ 1.907824] igb 0000:04:00.0 enp4s0: renamed from eth0
[ 1.927421] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.927425] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.927427] usb usb9: Product: OHCI PCI host controller
[ 1.927430] usb usb9: Manufacturer: Linux 4.11.0-rc7 ohci_hcd
[ 1.927432] usb usb9: SerialNumber: 0000:00:13.0
[ 1.927627] hub 9-0:1.0: USB hub found
[ 1.927641] hub 9-0:1.0: 5 ports detected
[ 1.928034] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.928107] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10
[ 1.928150] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
[ 1.946657] [drm] ring test on 11 succeeded in 1 usecs
[ 1.946658] [drm] UVD initialized successfully.
[ 1.983422] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.983427] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.983429] usb usb10: Product: OHCI PCI host controller
[ 1.983431] usb usb10: Manufacturer: Linux 4.11.0-rc7 ohci_hcd
[ 1.983434] usb usb10: SerialNumber: 0000:00:14.5
[ 1.983627] hub 10-0:1.0: USB hub found
[ 1.983641] hub 10-0:1.0: 2 ports detected
[ 1.983977] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 1.984047] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11
[ 1.984089] ohci-pci 0000:00:16.0: irq 22, io mem 0xfeb05000
[ 2.039410] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.039414] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.039417] usb usb11: Product: OHCI PCI host controller
[ 2.039419] usb usb11: Manufacturer: Linux 4.11.0-rc7 ohci_hcd
[ 2.039421] usb usb11: SerialNumber: 0000:00:16.0
[ 2.039608] hub 11-0:1.0: USB hub found
[ 2.039624] hub 11-0:1.0: 4 ports detected
[ 2.048307] usb 3-3: new high-speed USB device number 2 using ehci-pci
[ 2.076733] [drm] ring test on 12 succeeded in 21 usecs
[ 2.076739] [drm] ring test on 13 succeeded in 2 usecs
[ 2.076740] [drm] VCE initialized successfully.
[ 2.080314] tsc: Refined TSC clocksource calibration: 4816.070 MHz
[ 2.080324] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x456bbae0e08, max_idle_ns: 440795204688 ns
[ 2.120315] usb 6-1: new high-speed USB device number 2 using ehci-pci
[ 2.167658] usb 3-3: New USB device found, idVendor=1a40, idProduct=0201
[ 2.167662] usb 3-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.167665] usb 3-3: Product: USB 2.0 Hub [MTT]
[ 2.167963] hub 3-3:1.0: USB hub found
[ 2.168088] hub 3-3:1.0: 7 ports detected
[ 2.246318] usb 6-1: New USB device found, idVendor=0d8c, idProduct=1066
[ 2.246322] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.246325] usb 6-1: Product: I'm Fulla Schiit
[ 2.246327] usb 6-1: Manufacturer: Schiit Audio
[ 2.251493] input: Schiit Audio I'm Fulla Schiit as /devices/pci0000:00/0000:00:13.2/usb6/6-1/6-1:1.2/0003:0D8C:1066.0001/input/input2
[ 2.251632] hid-generic 0003:0D8C:1066.0001: input,hidraw0: USB HID v1.00 Device [Schiit Audio I'm Fulla Schiit] on usb-0000:00:13.2-1/input2
[ 2.256068] [drm] fb mappable at 0xC1227000
[ 2.256069] [drm] vram apper at 0xC0000000
[ 2.256069] [drm] size 8294400
[ 2.256069] [drm] fb depth is 24
[ 2.256070] [drm] pitch is 7680
[ 2.256156] fbcon: amdgpudrmfb (fb0) is primary device
[ 2.301089] device-mapper: uevent: version 1.0.3
[ 2.301256] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[ 2.362107] random: fast init done
[ 2.441136] lvm (1128) used greatest stack depth: 13576 bytes left
[ 2.460962] Console: switching to colour frame buffer device 240x67
[ 2.542250] usb 8-5: new full-speed USB device number 2 using ohci-pci
[ 2.636915] amdgpu 0000:01:00.0: fb0: amdgpudrmfb frame buffer device
[ 2.642908] [drm] ib test on ring 0 succeeded
[ 2.643022] [drm] ib test on ring 1 succeeded
[ 2.643080] [drm] ib test on ring 2 succeeded
[ 2.643181] [drm] ib test on ring 3 succeeded
[ 2.643243] [drm] ib test on ring 4 succeeded
[ 2.643345] [drm] ib test on ring 5 succeeded
[ 2.643388] [drm] ib test on ring 6 succeeded
[ 2.643435] [drm] ib test on ring 7 succeeded
[ 2.643513] [drm] ib test on ring 8 succeeded
[ 2.643553] [drm] ib test on ring 9 succeeded
[ 2.643589] [drm] ib test on ring 10 succeeded
[ 2.644514] [drm] ib test on ring 11 succeeded
[ 2.645390] [drm] ib test on ring 12 succeeded
[ 2.645485] [drm] Initialized amdgpu 3.10.0 20150101 for 0000:01:00.0 on minor 0
[ 2.652678] systemd-udevd (1111) used greatest stack depth: 12520 bytes left
[ 2.653227] systemd-udevd (1093) used greatest stack depth: 12456 bytes left
[ 2.686278] raid6: sse2x1 gen() 2285 MB/s
[ 2.701369] usb 8-5: New USB device found, idVendor=1532, idProduct=0214
[ 2.701373] usb 8-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.701376] usb 8-5: Product: Razer BlackWidow Ultimate 2016
[ 2.701378] usb 8-5: Manufacturer: Razer
[ 2.703269] raid6: sse2x1 xor() 1728 MB/s
[ 2.707956] input: Razer Razer BlackWidow Ultimate 2016 as /devices/pci0000:00/0000:00:12.0/usb8/8-5/8-5:1.0/0003:1532:0214.0002/input/input3
[ 2.720303] raid6: sse2x2 gen() 3644 MB/s
[ 2.737265] raid6: sse2x2 xor() 3878 MB/s
[ 2.754258] raid6: sse2x4 gen() 15648 MB/s
[ 2.759527] hid-generic 0003:1532:0214.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate 2016] on usb-0000:00:12.0-5/input0
[ 2.768637] input: Razer Razer BlackWidow Ultimate 2016 as /devices/pci0000:00/0000:00:12.0/usb8/8-5/8-5:1.1/0003:1532:0214.0003/input/input4
[ 2.771311] raid6: sse2x4 xor() 6757 MB/s
[ 2.771312] raid6: using algorithm sse2x4 gen() 15648 MB/s
[ 2.771312] raid6: .... xor() 6757 MB/s, rmw enabled
[ 2.771313] raid6: using ssse3x2 recovery algorithm
[ 2.771557] xor: automatically using best checksumming function avx
[ 2.820507] hid-generic 0003:1532:0214.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer BlackWidow Ultimate 2016] on usb-0000:00:12.0-5/input1
[ 2.826461] input: Razer Razer BlackWidow Ultimate 2016 as /devices/pci0000:00/0000:00:12.0/usb8/8-5/8-5:1.2/0003:1532:0214.0004/input/input5
[ 2.826689] hid-generic 0003:1532:0214.0004: input,hidraw3: USB HID v1.11 Mouse [Razer Razer BlackWidow Ultimate 2016] on usb-0000:00:12.0-5/input2
[ 3.025973] PM: Starting manual resume from disk
[ 3.061092] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.104552] clocksource: Switched to clocksource tsc
[ 3.112312] usb 3-3.6: new full-speed USB device number 4 using ehci-pci
[ 3.165709] NET: Registered protocol family 10
[ 3.171777] Segment Routing with IPv6
[ 3.172763] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.197712] usb 3-3.6: New USB device found, idVendor=046d, idProduct=c52b
[ 3.197716] usb 3-3.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.197719] usb 3-3.6: Product: USB Receiver
[ 3.197721] usb 3-3.6: Manufacturer: Logitech
[ 3.326980] RPC: Registered named UNIX socket transport module.
[ 3.326982] RPC: Registered udp transport module.
[ 3.326983] RPC: Registered tcp transport module.
[ 3.326984] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.337685] EXT4-fs (dm-1): re-mounted. Opts: discard,errors=remount-ro
[ 3.344101] it87: Found IT8721F chip at 0x290, revision 3
[ 3.410935] wmi: Mapper loaded
[ 3.437035] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.437271] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 3.437461] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 3.437626] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 3.450418] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[ 3.450534] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[ 3.465102] snd_hda_intel 0000:01:00.1: Too many HDMI devices
[ 3.465104] snd_hda_intel 0000:01:00.1: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[ 3.465104] snd_hda_intel 0000:01:00.1: Too many HDMI devices
[ 3.465105] snd_hda_intel 0000:01:00.1: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[ 3.465106] snd_hda_intel 0000:01:00.1: Too many HDMI devices
[ 3.465107] snd_hda_intel 0000:01:00.1: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[ 3.465107] snd_hda_intel 0000:01:00.1: Too many HDMI devices
[ 3.465108] snd_hda_intel 0000:01:00.1: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[ 3.465599] snd_hda_codec_hdmi: probe of hdaudioC1D0 failed with error -16
[ 3.466364] snd_hda_intel 0000:01:00.1: Too many HDMI devices
[ 3.466365] snd_hda_intel 0000:01:00.1: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[ 3.466367] snd_hda_intel 0000:01:00.1: Too many HDMI devices
[ 3.466367] snd_hda_intel 0000:01:00.1: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[ 3.466368] snd_hda_intel 0000:01:00.1: Too many HDMI devices
[ 3.466369] snd_hda_intel 0000:01:00.1: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[ 3.466370] snd_hda_intel 0000:01:00.1: Too many HDMI devices
[ 3.466371] snd_hda_intel 0000:01:00.1: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[ 3.466865] snd_hda_codec_hdmi: probe of hdaudioC1D0 failed with error -16
[ 3.468738] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
[ 3.469251] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 3.469252] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.469253] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.469254] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 3.469255] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
[ 3.469256] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 3.469257] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 3.469258] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 3.469259] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 3.469440] snd_hda_intel 0000:01:00.1: Too many HDMI devices
[ 3.469442] snd_hda_intel 0000:01:00.1: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[ 3.469443] snd_hda_intel 0000:01:00.1: Too many HDMI devices
[ 3.469443] snd_hda_intel 0000:01:00.1: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[ 3.469446] snd_hda_intel 0000:01:00.1: Too many HDMI devices
[ 3.469447] snd_hda_intel 0000:01:00.1: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[ 3.469448] snd_hda_intel 0000:01:00.1: Too many HDMI devices
[ 3.469448] snd_hda_intel 0000:01:00.1: Consider building the kernel with CONFIG_SND_DYNAMIC_MINORS=y
[ 3.469788] snd_hda_codec_hdmi: probe of hdaudioC1D0 failed with error -16
[ 3.471958] snd_hda_codec_generic hdaudioC1D0: ignore pin 0x7, too many assigned pins
[ 3.471971] snd_hda_codec_generic hdaudioC1D0: ignore pin 0x9, too many assigned pins
[ 3.471989] snd_hda_codec_generic hdaudioC1D0: ignore pin 0xb, too many assigned pins
[ 3.472002] snd_hda_codec_generic hdaudioC1D0: ignore pin 0xd, too many assigned pins
[ 3.472004] snd_hda_codec_generic hdaudioC1D0: autoconfig for Generic: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[ 3.472005] snd_hda_codec_generic hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.472007] snd_hda_codec_generic hdaudioC1D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.472008] snd_hda_codec_generic hdaudioC1D0: mono: mono_out=0x0
[ 3.472008] snd_hda_codec_generic hdaudioC1D0: dig-out=0x3/0x5
[ 3.472009] snd_hda_codec_generic hdaudioC1D0: inputs:
[ 3.472631] input: HDA ATI HDMI HDMI as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input18
[ 3.472726] input: HDA ATI HDMI HDMI as /devices/pci0000:00/0000:00:03.0/0000:01:00.1/sound/card1/input19
[ 3.472754] ------------[ cut here ]------------
[ 3.472757] WARNING: CPU: 4 PID: 75 at fs/proc/generic.c:346 proc_register+0xf4/0x110
[ 3.472758] proc_dir_entry 'card1/eld#0.0' already registered
[ 3.472759] Modules linked in: snd_rawmidi snd_seq_device snd_hda_codec_realtek(+) snd_hda_codec_hdmi snd_hda_codec_generic snd_hda_intel snd_hda_codec sg snd_hda_core snd_hwdep snd_pcm snd_timer snd soundcore wmi k10temp it87 hwmon_vid fam15h_power sunrpc efivarfs ip_tables ipv6 autofs4 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear dm_mod ohci_pci crc32c_intel i2c_piix4 ohci_hcd ehci_pci ehci_hcd amdgpu mfd_core drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm igb xhci_pci i2c_algo_bit xhci_hcd drm agpgart
[ 3.472783] CPU: 4 PID: 75 Comm: kworker/4:1 Not tainted 4.11.0-rc7 #6
[ 3.472783] Hardware name: To be filled by O.E.M. To be filled by O.E.M./970 PRO GAMING/AURA, BIOS 0901 11/07/2016
[ 3.472786] Workqueue: events azx_probe_work [snd_hda_intel]
[ 3.472787] Call Trace:
[ 3.472791] dump_stack+0x4d/0x63
[ 3.472794] __warn+0xc6/0xe0
[ 3.472795] warn_slowpath_fmt+0x46/0x50
[ 3.472797] proc_register+0xf4/0x110
[ 3.472798] proc_create_data+0x71/0xc0
[ 3.472802] snd_info_register+0x66/0xd0 [snd]
[ 3.472804] snd_info_register_recursive+0x5b/0x70 [snd]
[ 3.472806] snd_info_register_recursive+0x46/0x70 [snd]
[ 3.472808] snd_info_card_register+0x25/0xa0 [snd]
[ 3.472810] snd_card_register+0x162/0x1c0 [snd]
[ 3.472812] ? device_attach+0xb/0x10
[ 3.472814] azx_probe_work+0x4fa/0x6ce [snd_hda_intel]
[ 3.472815] ? azx_probe_work+0x4fa/0x6ce [snd_hda_intel]
[ 3.472817] process_one_work+0x1ee/0x4a0
[ 3.472819] worker_thread+0x43/0x4e0
[ 3.472820] kthread+0x104/0x140
[ 3.472821] ? process_one_work+0x4a0/0x4a0
[ 3.472823] ? kthread_create_on_node+0x40/0x40
[ 3.472824] ? umh_complete+0x40/0x40
[ 3.472825] ? call_usermodehelper_exec_async+0x137/0x140
[ 3.472826] ret_from_fork+0x29/0x40
[ 3.472831] ---[ end trace e61ed467e07e8718 ]---
[ 3.475035] input: PC Speaker as /devices/platform/pcspkr/input/input21
[ 3.483458] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
[ 3.486065] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input22
[ 3.486141] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input23
[ 3.486217] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input24
[ 3.486392] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input25
[ 3.486460] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input26
[ 3.486559] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input27
[ 3.486716] usbcore: registered new interface driver snd-usb-audio
[ 3.486800] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input28
[ 3.487127] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input29
[ 3.499372] logitech-djreceiver 0003:046D:C52B.0007: hiddev0,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.2-3.6/input2
[ 3.508476] kvm: Nested Virtualization enabled
[ 3.508481] kvm: Nested Paging enabled
[ 3.509820] EDAC MC: Ver: 3.0.0
[ 3.510475] MCE: In-kernel MCE decoding enabled.
[ 3.511039] EDAC amd64: Node 0: DRAM ECC disabled.
[ 3.511040] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 3.511040] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 3.511040] (Note that use of the override may cause unknown side effects.)
[ 3.525064] EDAC amd64: Node 0: DRAM ECC disabled.
[ 3.525065] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 3.525065] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 3.525065] (Note that use of the override may cause unknown side effects.)
[ 3.536636] EDAC amd64: Node 0: DRAM ECC disabled.
[ 3.536637] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 3.536637] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 3.536637] (Note that use of the override may cause unknown side effects.)
[ 3.541240] asus_wmi: ASUS WMI generic driver loaded
[ 3.542165] asus_wmi: Initialization: 0x0
[ 3.542185] asus_wmi: BIOS WMI version: 0.9
[ 3.542221] asus_wmi: SFUN value: 0x0
[ 3.542556] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input30
[ 3.542636] asus_wmi: Number of fans: 1
[ 3.571289] EXT4-fs (sdb2): mounting ext2 file system using the ext4 subsystem
[ 3.573705] Adding 6959100k swap on /dev/mapper/natasha--vg-swap_1. Priority:-1 extents:1 across:6959100k SSFS
[ 3.574368] EXT4-fs (sdb2): mounted filesystem without journal. Opts: (null)
[ 3.602818] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: discard
[ 3.659418] input: Logitech M510 as /devices/pci0000:00/0000:00:12.2/usb3/3-3/3-3.6/3-3.6:1.2/0003:046D:C52B.0007/0003:046D:4051.0008/input/input31
[ 3.659659] logitech-hidpp-device 0003:046D:4051.0008: input,hidraw5: USB HID v1.11 Mouse [Logitech M510] on usb-0000:00:12.2-3.6:1
[ 3.736907] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 3.831444] new mount options do not match the existing superblock, will be ignored
[ 3.850656] fuse init (API version 7.26)
[ 4.107458] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 4.813328] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 4.817082] br0: port 1(enp4s0) entered blocking state
[ 4.817100] br0: port 1(enp4s0) entered disabled state
[ 4.817265] device enp4s0 entered promiscuous mode
[ 4.823996] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 4.841678] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 6.680991] igb 0000:04:00.0 enp4s0: igb: enp4s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 6.784712] br0: port 1(enp4s0) entered blocking state
[ 6.784716] br0: port 1(enp4s0) entered forwarding state
[ 6.784908] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 8.992880] random: crng init done
[ 12.186958] mount.nfs (2045) used greatest stack depth: 11504 bytes left
[ 12.800489] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 12.814285] Ebtables v2.0 registered
[ 12.912385] libvirtd (2554) used greatest stack depth: 11376 bytes left
[ 14.040949] Bridge firewalling registered
[ 14.046708] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 14.238530] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[ 14.343467] IPv6: ADDRCONF(NETDEV_UP): br-f2813e70d7a8: link is not ready
[ 81.014290] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 81.184790] usb 1-1: New USB device found, idVendor=2109, idProduct=2812
[ 81.184795] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 81.184797] usb 1-1: Product: USB2.0 Hub
[ 81.184800] usb 1-1: Manufacturer: VIA Labs, Inc.
[ 81.185708] hub 1-1:1.0: USB hub found
[ 81.186031] hub 1-1:1.0: 4 ports detected
[ 81.287641] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 81.536861] usb 2-1: New USB device found, idVendor=2109, idProduct=0812
[ 81.536865] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 81.536868] usb 2-1: Product: USB3.0 Hub
[ 81.536870] usb 2-1: Manufacturer: VIA Labs, Inc.
[ 81.537943] hub 2-1:1.0: USB hub found
[ 81.538616] hub 2-1:1.0: 4 ports detected
[ 81.609260] usb 1-1.4: new high-speed USB device number 3 using xhci_hcd
[ 81.701710] usb 1-1.4: New USB device found, idVendor=2109, idProduct=2812
[ 81.701713] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 81.701716] usb 1-1.4: Product: USB2.0 Hub
[ 81.701717] usb 1-1.4: Manufacturer: VIA Labs, Inc.
[ 81.702643] hub 1-1.4:1.0: USB hub found
[ 81.702943] hub 1-1.4:1.0: 4 ports detected
[ 81.918578] usb 2-1.4: new SuperSpeed USB device number 3 using xhci_hcd
[ 82.166707] usb 2-1.4: New USB device found, idVendor=2109, idProduct=0812
[ 82.166712] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 82.166714] usb 2-1.4: Product: USB3.0 Hub
[ 82.166717] usb 2-1.4: Manufacturer: VIA Labs, Inc.
[ 82.168062] hub 2-1.4:1.0: USB hub found
[ 82.168743] hub 2-1.4:1.0: 4 ports detected
[ 103.735979] usb 1-1.4.4: new high-speed USB device number 4 using xhci_hcd
[ 103.826980] usb 1-1.4.4: New USB device found, idVendor=05c6, idProduct=9039
[ 103.826985] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 103.826987] usb 1-1.4.4: Product: Android
[ 103.826989] usb 1-1.4.4: Manufacturer: Android
[ 103.826992] usb 1-1.4.4: SerialNumber: XH023891
[ 103.852744] usb 1-1.4.4: usbfs: process 4360 (ThreadWeaver::T) did not claim interface 0 before use
[ 103.930343] usb 1-1.4.4: reset high-speed USB device number 4 using xhci_hcd
[ 104.021437] usb 1-1.4.4: usbfs: process 4360 (ThreadWeaver::T) did not claim interface 0 before use
[ 104.098365] usb 1-1.4.4: reset high-speed USB device number 4 using xhci_hcd
[ 104.189550] usb 1-1.4.4: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 104.266349] usb 1-1.4.4: reset high-speed USB device number 4 using xhci_hcd
[ 104.434372] usb 1-1.4.4: reset high-speed USB device number 4 using xhci_hcd
[ 104.525485] usb 1-1.4.4: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 104.602386] usb 1-1.4.4: reset high-speed USB device number 4 using xhci_hcd
[ 104.693735] usb 1-1.4.4: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 104.770392] usb 1-1.4.4: reset high-speed USB device number 4 using xhci_hcd
[ 104.861765] usb 1-1.4.4: usbfs: process 4177 (ThreadWeaver::T) did not claim interface 0 before use
[ 104.861821] usb 1-1.4.4: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 151.126153] usb 1-1.4.3: new high-speed USB device number 5 using xhci_hcd
[ 151.218952] usb 1-1.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 151.218956] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 151.218959] usb 1-1.4.3: Product: Android
[ 151.218961] usb 1-1.4.3: Manufacturer: Android
[ 151.218963] usb 1-1.4.3: SerialNumber: XH035553
[ 151.234790] usb 1-1.4.3: usbfs: process 4191 (ThreadWeaver::T) did not claim interface 0 before use
[ 151.264082] usb 1-1.4.3: USB disconnect, device number 5
[ 151.264422] usb 1-1.4.4: usbfs: process 4191 (ThreadWeaver::T) did not claim interface 0 before use
[ 151.341391] usb 1-1.4.4: reset high-speed USB device number 4 using xhci_hcd
[ 151.433915] usb 1-1.4.4: usbfs: process 4191 (ThreadWeaver::T) did not claim interface 0 before use
[ 151.434052] usb 1-1.4.4: usbfs: process 4343 (ThreadWeaver::T) did not claim interface 0 before use
[ 151.511128] usb 1-1.4.3: new high-speed USB device number 6 using xhci_hcd
[ 151.602903] usb 1-1.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 151.602908] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 151.602910] usb 1-1.4.3: Product: Android
[ 151.602912] usb 1-1.4.3: Manufacturer: Android
[ 151.602914] usb 1-1.4.3: SerialNumber: XH035553
[ 151.681439] usb 1-1.4.4: reset high-speed USB device number 4 using xhci_hcd
[ 151.774160] usb 1-1.4.4: usbfs: process 4343 (ThreadWeaver::T) did not claim interface 0 before use
[ 151.774258] usb 1-1.4.4: usbfs: process 4191 (ThreadWeaver::T) did not claim interface 0 before use
[ 151.774272] usb 1-1.4.4: usbfs: process 4276 (ThreadWeaver::T) did not claim interface 0 before use
[ 151.774547] usb 1-1.4.3: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 151.851495] usb 1-1.4.4: reset high-speed USB device number 4 using xhci_hcd
[ 152.024448] usb 1-1.4.3: reset high-speed USB device number 6 using xhci_hcd
[ 152.123860] usb 1-1.4.3: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 152.123906] usb 1-1.4.3: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 152.201564] usb 1-1.4.4: reset high-speed USB device number 4 using xhci_hcd
[ 152.294781] usb 1-1.4.4: usbfs: process 4276 (ThreadWeaver::T) did not claim interface 0 before use
[ 152.372531] usb 1-1.4.3: reset high-speed USB device number 6 using xhci_hcd
[ 152.470719] usb 1-1.4.3: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 152.496209] usb 1-1.4.3: usbfs: process 4358 (ThreadWeaver::T) did not claim interface 0 before use
[ 152.496390] usb 1-1.4.4: USB disconnect, device number 4
[ 152.573524] usb 1-1.4.3: reset high-speed USB device number 6 using xhci_hcd
[ 152.664752] usb 1-1.4.3: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 152.740224] usb 1-1.4.4: new high-speed USB device number 7 using xhci_hcd
[ 152.832051] usb 1-1.4.4: New USB device found, idVendor=05c6, idProduct=9039
[ 152.832055] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 152.832057] usb 1-1.4.4: Product: Android
[ 152.832059] usb 1-1.4.4: Manufacturer: Android
[ 152.832061] usb 1-1.4.4: SerialNumber: XH023891
[ 152.911541] usb 1-1.4.3: reset high-speed USB device number 6 using xhci_hcd
[ 153.004724] usb 1-1.4.3: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 153.004859] usb 1-1.4.3: usbfs: process 4358 (ThreadWeaver::T) did not claim interface 0 before use
[ 153.005080] usb 1-1.4.4: usbfs: process 4359 (ThreadWeaver::T) did not claim interface 0 before use
[ 153.005119] usb 1-1.4.4: usbfs: process 4357 (ThreadWeaver::T) did not claim interface 0 before use
[ 153.084536] usb 1-1.4.3: reset high-speed USB device number 6 using xhci_hcd
[ 153.123564] usb 1-1.4.3: USB disconnect, device number 6
[ 153.187592] usb 1-1.4.4: reset high-speed USB device number 7 using xhci_hcd
[ 153.354250] usb 1-1.4.3: new high-speed USB device number 8 using xhci_hcd
[ 153.445934] usb 1-1.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 153.445939] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 153.445941] usb 1-1.4.3: Product: Android
[ 153.445943] usb 1-1.4.3: Manufacturer: Android
[ 153.445946] usb 1-1.4.3: SerialNumber: XH035553
[ 153.470870] usb 1-1.4.3: usbfs: process 4343 (ThreadWeaver::T) did not claim interface 0 before use
[ 153.470894] usb 1-1.4.3: usbfs: process 4360 (ThreadWeaver::T) did not claim interface 0 before use
[ 153.471075] usb 1-1.4.4: USB disconnect, device number 7
[ 153.670262] usb 1-1.4.4: new high-speed USB device number 9 using xhci_hcd
[ 153.760974] usb 1-1.4.4: New USB device found, idVendor=05c6, idProduct=9039
[ 153.760978] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 153.760981] usb 1-1.4.4: Product: Android
[ 153.760983] usb 1-1.4.4: Manufacturer: Android
[ 153.760985] usb 1-1.4.4: SerialNumber: XH023891
[ 153.763281] usb 1-1.4.3: USB disconnect, device number 8
[ 153.950229] usb 1-1.4.3: new high-speed USB device number 10 using xhci_hcd
[ 154.043340] usb 1-1.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 154.043344] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 154.043346] usb 1-1.4.3: Product: Android
[ 154.043348] usb 1-1.4.3: Manufacturer: Android
[ 154.043350] usb 1-1.4.3: SerialNumber: XH035553
[ 154.057421] usb 1-1.4.3: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 154.139633] usb 1-1.4.3: reset high-speed USB device number 10 using xhci_hcd
[ 154.231757] usb 1-1.4.3: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 154.317599] usb 1-1.4.3: reset high-speed USB device number 10 using xhci_hcd
[ 154.414997] usb 1-1.4.3: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 154.415109] usb 1-1.4.3: usbfs: process 4177 (ThreadWeaver::T) did not claim interface 0 before use
[ 154.493569] usb 1-1.4.3: reset high-speed USB device number 10 using xhci_hcd
[ 154.585616] usb 1-1.4.3: usbfs: process 4177 (ThreadWeaver::T) did not claim interface 0 before use
[ 154.585768] usb 1-1.4.3: usbfs: process 4277 (ThreadWeaver::T) did not claim interface 0 before use
[ 154.663598] usb 1-1.4.3: reset high-speed USB device number 10 using xhci_hcd
[ 154.756855] usb 1-1.4.3: usbfs: process 4277 (ThreadWeaver::T) did not claim interface 0 before use
[ 154.834681] usb 1-1.4.3: reset high-speed USB device number 10 using xhci_hcd
[ 154.860749] usb 1-1.4.4: usbfs: process 4177 (ThreadWeaver::T) did not claim interface 0 before use
[ 154.861742] usb 1-1.4.3: USB disconnect, device number 10
[ 154.937562] usb 1-1.4.4: reset high-speed USB device number 9 using xhci_hcd
[ 155.028834] usb 1-1.4.4: usbfs: process 4177 (ThreadWeaver::T) did not claim interface 0 before use
[ 155.028876] usb 1-1.4.4: usbfs: process 4277 (ThreadWeaver::T) did not claim interface 0 before use
[ 155.105307] usb 1-1.4.3: new high-speed USB device number 11 using xhci_hcd
[ 155.198077] usb 1-1.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 155.198081] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 155.198084] usb 1-1.4.3: Product: Android
[ 155.198086] usb 1-1.4.3: Manufacturer: Android
[ 155.198088] usb 1-1.4.3: SerialNumber: XH035553
[ 155.277535] usb 1-1.4.4: reset high-speed USB device number 9 using xhci_hcd
[ 155.450646] usb 1-1.4.4: reset high-speed USB device number 9 using xhci_hcd
[ 155.550752] usb 1-1.4.4: usbfs: process 4277 (ThreadWeaver::T) did not claim interface 0 before use
[ 155.550855] usb 1-1.4.4: usbfs: process 4276 (ThreadWeaver::T) did not claim interface 0 before use
[ 155.550868] usb 1-1.4.4: usbfs: process 4177 (ThreadWeaver::T) did not claim interface 0 before use
[ 155.550896] usb 1-1.4.4: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 155.551157] usb 1-1.4.3: usbfs: process 4164 (ThreadWeaver::T) did not claim interface 0 before use
[ 155.629652] usb 1-1.4.4: reset high-speed USB device number 9 using xhci_hcd
[ 155.725188] usb 1-1.4.4: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 155.763092] usb 1-1.4.3: USB disconnect, device number 11
[ 155.948361] usb 1-1.4.3: new high-speed USB device number 12 using xhci_hcd
[ 156.039044] usb 1-1.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 156.039048] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 156.039050] usb 1-1.4.3: Product: Android
[ 156.039052] usb 1-1.4.3: Manufacturer: Android
[ 156.039054] usb 1-1.4.3: SerialNumber: XH035553
[ 156.041302] usb 1-1.4.4: USB disconnect, device number 9
[ 156.227341] usb 1-1.4.4: new high-speed USB device number 13 using xhci_hcd
[ 156.320227] usb 1-1.4.4: New USB device found, idVendor=05c6, idProduct=9039
[ 156.320231] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 156.320234] usb 1-1.4.4: Product: Android
[ 156.320236] usb 1-1.4.4: Manufacturer: Android
[ 156.320238] usb 1-1.4.4: SerialNumber: XH023891
[ 156.334544] usb 1-1.4.4: usbfs: process 4360 (ThreadWeaver::T) did not claim interface 0 before use
[ 156.413628] usb 1-1.4.4: reset high-speed USB device number 13 using xhci_hcd
[ 156.506858] usb 1-1.4.4: usbfs: process 4360 (ThreadWeaver::T) did not claim interface 0 before use
[ 156.532518] usb 1-1.4.4: USB disconnect, device number 13
[ 156.534112] usb 1-1.4.3: usbfs: process 4357 (ThreadWeaver::T) did not claim interface 0 before use
[ 156.610608] usb 1-1.4.3: reset high-speed USB device number 12 using xhci_hcd
[ 156.702937] usb 1-1.4.3: usbfs: process 4357 (ThreadWeaver::T) did not claim interface 0 before use
[ 156.779395] usb 1-1.4.4: new high-speed USB device number 14 using xhci_hcd
[ 156.872064] usb 1-1.4.4: New USB device found, idVendor=05c6, idProduct=9039
[ 156.872069] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 156.872071] usb 1-1.4.4: Product: Android
[ 156.872074] usb 1-1.4.4: Manufacturer: Android
[ 156.872076] usb 1-1.4.4: SerialNumber: XH023891
[ 156.889559] usb 1-1.4.4: usbfs: process 4177 (ThreadWeaver::T) did not claim interface 0 before use
[ 156.950658] usb 1-1.4.3: reset high-speed USB device number 12 using xhci_hcd
[ 157.043089] usb 1-1.4.3: usbfs: process 4359 (ThreadWeaver::T) did not claim interface 0 before use
[ 157.043284] usb 1-1.4.3: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 157.118734] usb 1-1.4.4: reset high-speed USB device number 14 using xhci_hcd
[ 157.211962] usb 1-1.4.4: usbfs: process 4177 (ThreadWeaver::T) did not claim interface 0 before use
[ 157.212111] usb 1-1.4.4: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 157.289729] usb 1-1.4.3: reset high-speed USB device number 12 using xhci_hcd
[ 157.384938] usb 1-1.4.3: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 157.384979] usb 1-1.4.3: usbfs: process 4356 (ThreadWeaver::T) did not claim interface 0 before use
[ 157.461745] usb 1-1.4.4: reset high-speed USB device number 14 using xhci_hcd
[ 157.632744] usb 1-1.4.3: reset high-speed USB device number 12 using xhci_hcd
[ 157.726152] usb 1-1.4.3: usbfs: process 4360 (ThreadWeaver::T) did not claim interface 0 before use
[ 157.726271] usb 1-1.4.3: usbfs: process 4356 (ThreadWeaver::T) did not claim interface 0 before use
[ 157.726388] usb 1-1.4.3: usbfs: process 4356 (ThreadWeaver::T) did not claim interface 0 before use
[ 157.803745] usb 1-1.4.4: reset high-speed USB device number 14 using xhci_hcd
[ 157.900959] usb 1-1.4.4: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 157.901019] usb 1-1.4.4: usbfs: process 4178 (ThreadWeaver::T) did not claim interface 0 before use
[ 157.901079] usb 1-1.4.4: usbfs: process 4178 (ThreadWeaver::T) did not claim interface 0 before use
[ 157.978753] usb 1-1.4.3: reset high-speed USB device number 12 using xhci_hcd
[ 158.157690] usb 1-1.4.4: reset high-speed USB device number 14 using xhci_hcd
[ 158.255050] usb 1-1.4.4: usbfs: process 4177 (ThreadWeaver::T) did not claim interface 0 before use
[ 158.332781] usb 1-1.4.3: reset high-speed USB device number 12 using xhci_hcd
[ 158.427054] usb 1-1.4.3: usbfs: process 4359 (ThreadWeaver::T) did not claim interface 0 before use
[ 158.427115] usb 1-1.4.3: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 158.504775] usb 1-1.4.4: reset high-speed USB device number 14 using xhci_hcd
[ 158.675763] usb 1-1.4.3: reset high-speed USB device number 12 using xhci_hcd
[ 158.770243] usb 1-1.4.4: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 158.770348] usb 1-1.4.4: usbfs: process 4178 (ThreadWeaver::T) did not claim interface 0 before use
[ 158.770402] usb 1-1.4.4: usbfs: process 4177 (ThreadWeaver::T) did not claim interface 0 before use
[ 158.850774] usb 1-1.4.3: reset high-speed USB device number 12 using xhci_hcd
[ 158.945178] usb 1-1.4.3: usbfs: process 4360 (ThreadWeaver::T) did not claim interface 0 before use
[ 158.945307] usb 1-1.4.3: usbfs: process 4357 (ThreadWeaver::T) did not claim interface 0 before use
[ 158.945447] usb 1-1.4.3: usbfs: process 4359 (ThreadWeaver::T) did not claim interface 0 before use
[ 158.945546] usb 1-1.4.3: usbfs: process 4356 (ThreadWeaver::T) did not claim interface 0 before use
[ 158.945662] usb 1-1.4.3: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 159.024730] usb 1-1.4.4: reset high-speed USB device number 14 using xhci_hcd
[ 159.197769] usb 1-1.4.3: reset high-speed USB device number 12 using xhci_hcd
[ 159.291222] usb 1-1.4.3: usbfs: process 4360 (ThreadWeaver::T) did not claim interface 0 before use
[ 159.291277] usb 1-1.4.3: usbfs: process 4178 (ThreadWeaver::T) did not claim interface 0 before use
[ 159.291287] usb 1-1.4.3: usbfs: process 4359 (ThreadWeaver::T) did not claim interface 0 before use
[ 159.370812] usb 1-1.4.3: reset high-speed USB device number 12 using xhci_hcd
[ 159.545838] usb 1-1.4.3: reset high-speed USB device number 12 using xhci_hcd
[ 159.573765] usb 1-1.4.3: USB disconnect, device number 12
[ 159.759521] usb 1-1.4.3: new high-speed USB device number 15 using xhci_hcd
[ 159.852350] usb 1-1.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 159.852353] usb 1-1.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 159.852355] usb 1-1.4.3: Product: Android
[ 159.852357] usb 1-1.4.3: Manufacturer: Android
[ 159.852358] usb 1-1.4.3: SerialNumber: XH035553
[ 159.866655] usb 1-1.4.3: usbfs: process 4358 (ThreadWeaver::T) did not claim interface 0 before use
[ 159.943756] usb 1-1.4.3: reset high-speed USB device number 15 using xhci_hcd
[ 160.035943] usb 1-1.4.3: usbfs: process 4358 (ThreadWeaver::T) did not claim interface 0 before use
[ 160.113840] usb 1-1.4.3: reset high-speed USB device number 15 using xhci_hcd
[ 160.205294] usb 1-1.4.3: usbfs: process 4358 (ThreadWeaver::T) did not claim interface 0 before use
[ 160.285824] usb 1-1.4.3: reset high-speed USB device number 15 using xhci_hcd
[ 160.378247] usb 1-1.4.3: usbfs: process 4277 (ThreadWeaver::T) did not claim interface 0 before use
[ 160.378428] usb 1-1.4.3: usbfs: process 4361 (ThreadWeaver::T) did not claim interface 0 before use
[ 160.461834] usb 1-1.4.3: reset high-speed USB device number 15 using xhci_hcd
[ 160.554251] usb 1-1.4.3: usbfs: process 4358 (ThreadWeaver::T) did not claim interface 0 before use
[ 160.632864] usb 1-1.4.3: reset high-speed USB device number 15 using xhci_hcd
[ 160.726136] usb 1-1.4.3: usbfs: process 4277 (ThreadWeaver::T) did not claim interface 0 before use
[ 160.726405] usb 1-1.4.4: usbfs: process 4358 (ThreadWeaver::T) did not claim interface 0 before use
[ 160.726407] usb 1-1.4.3: usbfs: process 4361 (ThreadWeaver::T) did not claim interface 0 before use
[ 160.804883] usb 1-1.4.4: reset high-speed USB device number 14 using xhci_hcd
[ 160.898138] usb 1-1.4.4: usbfs: process 4358 (ThreadWeaver::T) did not claim interface 0 before use
[ 160.898344] usb 1-1.4.4: usbfs: process 4361 (ThreadWeaver::T) did not claim interface 0 before use
[ 160.974839] usb 1-1.4.3: reset high-speed USB device number 15 using xhci_hcd
[ 161.145877] usb 1-1.4.4: reset high-speed USB device number 14 using xhci_hcd
[ 161.239488] usb 1-1.4.4: usbfs: process 4361 (ThreadWeaver::T) did not claim interface 0 before use
[ 161.316874] usb 1-1.4.4: reset high-speed USB device number 14 using xhci_hcd
[ 161.411341] usb 1-1.4.4: usbfs: process 4361 (ThreadWeaver::T) did not claim interface 0 before use
[ 161.411540] usb 1-1.4.4: usbfs: process 4358 (ThreadWeaver::T) did not claim interface 0 before use
[ 161.490951] usb 1-1.4.4: reset high-speed USB device number 14 using xhci_hcd
[ 166.558217] usb 1-1.4.4: USB disconnect, device number 14
[ 168.862495] usb 1-1.4.3: USB disconnect, device number 15
[ 513.076774] usb 1-1: USB disconnect, device number 2
[ 513.076778] usb 1-1.4: USB disconnect, device number 3
[ 514.077803] usb 2-1: USB disconnect, device number 2
[ 514.077806] usb 2-1.4: USB disconnect, device number 3
[ 514.264717] usb 1-2: new high-speed USB device number 16 using xhci_hcd
[ 514.437260] usb 1-2: New USB device found, idVendor=2109, idProduct=2812
[ 514.437265] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 514.437268] usb 1-2: Product: USB2.0 Hub
[ 514.437270] usb 1-2: Manufacturer: VIA Labs, Inc.
[ 514.438201] hub 1-2:1.0: USB hub found
[ 514.438487] hub 1-2:1.0: 4 ports detected
[ 514.540097] usb 2-2: new SuperSpeed USB device number 4 using xhci_hcd
[ 514.787846] usb 2-2: New USB device found, idVendor=2109, idProduct=0812
[ 514.787850] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 514.787851] usb 2-2: Product: USB3.0 Hub
[ 514.787853] usb 2-2: Manufacturer: VIA Labs, Inc.
[ 514.788938] hub 2-2:1.0: USB hub found
[ 514.789373] hub 2-2:1.0: 4 ports detected
[ 514.861754] usb 1-2.4: new high-speed USB device number 17 using xhci_hcd
[ 514.954256] usb 1-2.4: New USB device found, idVendor=2109, idProduct=2812
[ 514.954260] usb 1-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 514.954262] usb 1-2.4: Product: USB2.0 Hub
[ 514.954264] usb 1-2.4: Manufacturer: VIA Labs, Inc.
[ 514.955197] hub 1-2.4:1.0: USB hub found
[ 514.955471] hub 1-2.4:1.0: 4 ports detected
[ 515.168073] usb 2-2.4: new SuperSpeed USB device number 5 using xhci_hcd
[ 515.417444] usb 2-2.4: New USB device found, idVendor=2109, idProduct=0812
[ 515.417448] usb 2-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 515.417450] usb 2-2.4: Product: USB3.0 Hub
[ 515.417452] usb 2-2.4: Manufacturer: VIA Labs, Inc.
[ 515.418821] hub 2-2.4:1.0: USB hub found
[ 515.419201] hub 2-2.4:1.0: 4 ports detected
[ 542.604355] usb 1-2.4.4: new high-speed USB device number 18 using xhci_hcd
[ 542.697113] usb 1-2.4.4: New USB device found, idVendor=05c6, idProduct=9039
[ 542.697116] usb 1-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 542.697118] usb 1-2.4.4: Product: Android
[ 542.697119] usb 1-2.4.4: Manufacturer: Android
[ 542.697120] usb 1-2.4.4: SerialNumber: XH035553
[ 542.710411] usb 1-2.4.4: usbfs: process 4191 (ThreadWeaver::T) did not claim interface 0 before use
[ 542.789668] usb 1-2.4.4: reset high-speed USB device number 18 using xhci_hcd
[ 542.881721] usb 1-2.4.4: usbfs: process 4191 (ThreadWeaver::T) did not claim interface 0 before use
[ 542.959680] usb 1-2.4.4: reset high-speed USB device number 18 using xhci_hcd
[ 543.050789] usb 1-2.4.4: usbfs: process 4191 (ThreadWeaver::T) did not claim interface 0 before use
[ 543.127728] usb 1-2.4.4: reset high-speed USB device number 18 using xhci_hcd
[ 543.219767] usb 1-2.4.4: usbfs: process 4178 (ThreadWeaver::T) did not claim interface 0 before use
[ 543.296659] usb 1-2.4.4: reset high-speed USB device number 18 using xhci_hcd
[ 543.466692] usb 1-2.4.4: reset high-speed USB device number 18 using xhci_hcd
[ 543.557661] usb 1-2.4.4: usbfs: process 4178 (ThreadWeaver::T) did not claim interface 0 before use
[ 543.557760] usb 1-2.4.4: usbfs: process 4191 (ThreadWeaver::T) did not claim interface 0 before use
[ 543.557850] usb 1-2.4.4: usbfs: process 4343 (ThreadWeaver::T) did not claim interface 0 before use
[ 543.634691] usb 1-2.4.4: reset high-speed USB device number 18 using xhci_hcd
[ 562.066877] usb 1-2.4.3: new high-speed USB device number 19 using xhci_hcd
[ 562.160518] usb 1-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 562.160523] usb 1-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 562.160527] usb 1-2.4.3: Product: Android
[ 562.160530] usb 1-2.4.3: Manufacturer: Android
[ 562.160534] usb 1-2.4.3: SerialNumber: XH023891
[ 562.173864] usb 1-2.4.3: usbfs: process 4276 (ThreadWeaver::T) did not claim interface 0 before use
[ 562.199778] usb 1-2.4.3: USB disconnect, device number 19
[ 562.199784] usb 1-2.4.4: usbfs: process 4356 (ThreadWeaver::T) did not claim interface 0 before use
[ 562.199835] usb 1-2.4.4: usbfs: process 4360 (ThreadWeaver::T) did not claim interface 0 before use
[ 562.277164] usb 1-2.4.4: reset high-speed USB device number 18 using xhci_hcd
[ 562.369228] usb 1-2.4.4: usbfs: process 4276 (ThreadWeaver::T) did not claim interface 0 before use
[ 562.445886] usb 1-2.4.3: new high-speed USB device number 20 using xhci_hcd
[ 562.540567] usb 1-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 562.540571] usb 1-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 562.540574] usb 1-2.4.3: Product: Android
[ 562.540576] usb 1-2.4.3: Manufacturer: Android
[ 562.540577] usb 1-2.4.3: SerialNumber: XH023891
[ 562.618242] usb 1-2.4.4: reset high-speed USB device number 18 using xhci_hcd
[ 562.710334] usb 1-2.4.4: usbfs: process 4360 (ThreadWeaver::T) did not claim interface 0 before use
[ 562.710377] usb 1-2.4.4: usbfs: process 4356 (ThreadWeaver::T) did not claim interface 0 before use
[ 562.710442] usb 1-2.4.4: usbfs: process 4356 (ThreadWeaver::T) did not claim interface 0 before use
[ 562.710727] usb 1-2.4.3: usbfs: process 4178 (ThreadWeaver::T) did not claim interface 0 before use
[ 562.788184] usb 1-2.4.4: reset high-speed USB device number 18 using xhci_hcd
[ 562.962189] usb 1-2.4.3: reset high-speed USB device number 20 using xhci_hcd
[ 563.054651] usb 1-2.4.3: usbfs: process 4178 (ThreadWeaver::T) did not claim interface 0 before use
[ 563.054680] usb 1-2.4.3: usbfs: process 4357 (ThreadWeaver::T) did not claim interface 0 before use
[ 563.132235] usb 1-2.4.4: reset high-speed USB device number 18 using xhci_hcd
[ 563.223390] usb 1-2.4.4: usbfs: process 4276 (ThreadWeaver::T) did not claim interface 0 before use
[ 563.300190] usb 1-2.4.3: reset high-speed USB device number 20 using xhci_hcd
[ 563.396618] usb 1-2.4.3: usbfs: process 4357 (ThreadWeaver::T) did not claim interface 0 before use
[ 563.396704] usb 1-2.4.3: usbfs: process 4343 (ThreadWeaver::T) did not claim interface 0 before use
[ 563.474255] usb 1-2.4.4: reset high-speed USB device number 18 using xhci_hcd
[ 563.644242] usb 1-2.4.3: reset high-speed USB device number 20 using xhci_hcd
[ 563.736357] usb 1-2.4.3: usbfs: process 4178 (ThreadWeaver::T) did not claim interface 0 before use
[ 563.736429] usb 1-2.4.4: usbfs: process 4276 (ThreadWeaver::T) did not claim interface 0 before use
[ 563.736572] usb 1-2.4.4: usbfs: process 4356 (ThreadWeaver::T) did not claim interface 0 before use
[ 563.815209] usb 1-2.4.3: reset high-speed USB device number 20 using xhci_hcd
[ 563.856702] usb 1-2.4.3: USB disconnect, device number 20
[ 563.920290] usb 1-2.4.4: reset high-speed USB device number 18 using xhci_hcd
[ 564.011743] usb 1-2.4.4: usbfs: process 4357 (ThreadWeaver::T) did not claim interface 0 before use
[ 564.086916] usb 1-2.4.3: new high-speed USB device number 21 using xhci_hcd
[ 564.179794] usb 1-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 564.179799] usb 1-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 564.179801] usb 1-2.4.3: Product: Android
[ 564.179803] usb 1-2.4.3: Manufacturer: Android
[ 564.179805] usb 1-2.4.3: SerialNumber: XH023891
[ 564.205192] usb 1-2.4.4: USB disconnect, device number 18
[ 564.205204] usb 1-2.4.3: usbfs: process 4164 (ThreadWeaver::T) did not claim interface 0 before use
[ 564.403962] usb 1-2.4.4: new high-speed USB device number 22 using xhci_hcd
[ 564.495719] usb 1-2.4.4: New USB device found, idVendor=05c6, idProduct=9039
[ 564.495721] usb 1-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 564.495722] usb 1-2.4.4: Product: Android
[ 564.495723] usb 1-2.4.4: Manufacturer: Android
[ 564.495724] usb 1-2.4.4: SerialNumber: XH035553
[ 564.497468] usb 1-2.4.3: USB disconnect, device number 21
[ 564.686901] usb 1-2.4.3: new high-speed USB device number 23 using xhci_hcd
[ 564.779862] usb 1-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 564.779864] usb 1-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 564.779866] usb 1-2.4.3: Product: Android
[ 564.779867] usb 1-2.4.3: Manufacturer: Android
[ 564.779868] usb 1-2.4.3: SerialNumber: XH023891
[ 564.801550] usb 1-2.4.3: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 564.879255] usb 1-2.4.3: reset high-speed USB device number 23 using xhci_hcd
[ 564.971411] usb 1-2.4.3: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 564.971573] usb 1-2.4.3: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 564.971634] usb 1-2.4.3: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 564.971643] usb 1-2.4.3: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 564.971652] usb 1-2.4.3: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 564.971660] usb 1-2.4.3: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 564.971670] usb 1-2.4.3: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 564.971680] usb 1-2.4.3: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 564.971690] usb 1-2.4.3: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 564.971699] usb 1-2.4.3: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 564.971709] usb 1-2.4.3: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 564.971719] usb 1-2.4.3: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 564.971729] usb 1-2.4.3: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 564.971739] usb 1-2.4.3: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 564.971751] usb 1-2.4.3: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 565.050206] usb 1-2.4.3: reset high-speed USB device number 23 using xhci_hcd
[ 565.077290] usb 1-2.4.3: USB disconnect, device number 23
[ 565.077723] usb 1-2.4.4: usbfs: process 4276 (ThreadWeaver::T) did not claim interface 0 before use
[ 565.155218] usb 1-2.4.4: reset high-speed USB device number 22 using xhci_hcd
[ 565.248389] usb 1-2.4.4: usbfs: process 4276 (ThreadWeaver::T) did not claim interface 0 before use
[ 565.248588] usb 1-2.4.4: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 565.325948] usb 1-2.4.3: new high-speed USB device number 24 using xhci_hcd
[ 565.419707] usb 1-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 565.419709] usb 1-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 565.419711] usb 1-2.4.3: Product: Android
[ 565.419712] usb 1-2.4.3: Manufacturer: Android
[ 565.419713] usb 1-2.4.3: SerialNumber: XH023891
[ 565.497228] usb 1-2.4.4: reset high-speed USB device number 22 using xhci_hcd
[ 565.591524] usb 1-2.4.4: usbfs: process 4357 (ThreadWeaver::T) did not claim interface 0 before use
[ 565.591584] usb 1-2.4.4: usbfs: process 4164 (ThreadWeaver::T) did not claim interface 0 before use
[ 565.673254] usb 1-2.4.4: reset high-speed USB device number 22 using xhci_hcd
[ 565.767360] usb 1-2.4.4: usbfs: process 4357 (ThreadWeaver::T) did not claim interface 0 before use
[ 565.846297] usb 1-2.4.4: reset high-speed USB device number 22 using xhci_hcd
[ 565.873833] usb 1-2.4.3: usbfs: process 4178 (ThreadWeaver::T) did not claim interface 0 before use
[ 565.873924] usb 1-2.4.4: USB disconnect, device number 22
[ 565.952271] usb 1-2.4.3: reset high-speed USB device number 24 using xhci_hcd
[ 566.045471] usb 1-2.4.3: usbfs: process 4191 (ThreadWeaver::T) did not claim interface 0 before use
[ 566.045544] usb 1-2.4.3: usbfs: process 4178 (ThreadWeaver::T) did not claim interface 0 before use
[ 566.045609] usb 1-2.4.3: usbfs: process 4178 (ThreadWeaver::T) did not claim interface 0 before use
[ 566.124971] usb 1-2.4.4: new high-speed USB device number 25 using xhci_hcd
[ 566.220802] usb 1-2.4.4: New USB device found, idVendor=05c6, idProduct=9039
[ 566.220806] usb 1-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 566.220809] usb 1-2.4.4: Product: Android
[ 566.220810] usb 1-2.4.4: Manufacturer: Android
[ 566.220812] usb 1-2.4.4: SerialNumber: XH035553
[ 566.298254] usb 1-2.4.3: reset high-speed USB device number 24 using xhci_hcd
[ 566.399966] usb 1-2.4.4: usbfs: process 4177 (ThreadWeaver::T) did not claim interface 0 before use
[ 566.469269] usb 1-2.4.3: reset high-speed USB device number 24 using xhci_hcd
[ 566.562534] usb 1-2.4.3: usbfs: process 4191 (ThreadWeaver::T) did not claim interface 0 before use
[ 566.586964] usb 1-2.4.4: USB disconnect, device number 25
[ 566.785972] usb 1-2.4.4: new high-speed USB device number 26 using xhci_hcd
[ 566.877962] usb 1-2.4.4: New USB device found, idVendor=05c6, idProduct=9039
[ 566.877965] usb 1-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 566.877967] usb 1-2.4.4: Product: Android
[ 566.877968] usb 1-2.4.4: Manufacturer: Android
[ 566.877969] usb 1-2.4.4: SerialNumber: XH035553
[ 566.880083] usb 1-2.4.3: USB disconnect, device number 24
[ 567.066977] usb 1-2.4.3: new high-speed USB device number 27 using xhci_hcd
[ 567.160865] usb 1-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 567.160868] usb 1-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 567.160870] usb 1-2.4.3: Product: Android
[ 567.160871] usb 1-2.4.3: Manufacturer: Android
[ 567.160872] usb 1-2.4.3: SerialNumber: XH023891
[ 567.181860] usb 1-2.4.3: usbfs: process 4356 (ThreadWeaver::T) did not claim interface 0 before use
[ 567.207964] usb 1-2.4.3: USB disconnect, device number 27
[ 567.208403] usb 1-2.4.4: usbfs: process 4178 (ThreadWeaver::T) did not claim interface 0 before use
[ 567.208414] usb 1-2.4.4: usbfs: process 4191 (ThreadWeaver::T) did not claim interface 0 before use
[ 567.208418] usb 1-2.4.4: usbfs: process 4361 (ThreadWeaver::T) did not claim interface 0 before use
[ 567.288272] usb 1-2.4.4: reset high-speed USB device number 26 using xhci_hcd
[ 567.458024] usb 1-2.4.3: new high-speed USB device number 28 using xhci_hcd
[ 567.549635] usb 1-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 567.549638] usb 1-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 567.549640] usb 1-2.4.3: Product: Android
[ 567.549641] usb 1-2.4.3: Manufacturer: Android
[ 567.549642] usb 1-2.4.3: SerialNumber: XH023891
[ 567.629294] usb 1-2.4.4: reset high-speed USB device number 26 using xhci_hcd
[ 567.722439] usb 1-2.4.4: usbfs: process 4178 (ThreadWeaver::T) did not claim interface 0 before use
[ 567.800298] usb 1-2.4.4: reset high-speed USB device number 26 using xhci_hcd
[ 567.891393] usb 1-2.4.4: usbfs: process 4361 (ThreadWeaver::T) did not claim interface 0 before use
[ 567.891427] usb 1-2.4.4: usbfs: process 4191 (ThreadWeaver::T) did not claim interface 0 before use
[ 567.891505] usb 1-2.4.4: usbfs: process 4191 (ThreadWeaver::T) did not claim interface 0 before use
[ 567.891793] usb 1-2.4.3: usbfs: process 4343 (ThreadWeaver::T) did not claim interface 0 before use
[ 567.891809] usb 1-2.4.3: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 567.969286] usb 1-2.4.4: reset high-speed USB device number 26 using xhci_hcd
[ 568.008109] usb 1-2.4.4: USB disconnect, device number 26
[ 568.072306] usb 1-2.4.3: reset high-speed USB device number 28 using xhci_hcd
[ 568.240002] usb 1-2.4.4: new high-speed USB device number 29 using xhci_hcd
[ 568.330810] usb 1-2.4.4: New USB device found, idVendor=05c6, idProduct=9039
[ 568.330813] usb 1-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 568.330815] usb 1-2.4.4: Product: Android
[ 568.330816] usb 1-2.4.4: Manufacturer: Android
[ 568.330818] usb 1-2.4.4: SerialNumber: XH035553
[ 568.355785] usb 1-2.4.4: usbfs: process 4360 (ThreadWeaver::T) did not claim interface 0 before use
[ 568.355808] usb 1-2.4.4: usbfs: process 4358 (ThreadWeaver::T) did not claim interface 0 before use
[ 568.369085] usb 1-2.4.3: USB disconnect, device number 28
[ 568.432384] usb 1-2.4.4: reset high-speed USB device number 29 using xhci_hcd
[ 568.523435] usb 1-2.4.4: usbfs: process 4360 (ThreadWeaver::T) did not claim interface 0 before use
[ 568.523473] usb 1-2.4.4: usbfs: process 4276 (ThreadWeaver::T) did not claim interface 0 before use
[ 568.600028] usb 1-2.4.3: new high-speed USB device number 30 using xhci_hcd
[ 568.690925] usb 1-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 568.690928] usb 1-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 568.690930] usb 1-2.4.3: Product: Android
[ 568.690931] usb 1-2.4.3: Manufacturer: Android
[ 568.690933] usb 1-2.4.3: SerialNumber: XH023891
[ 568.769313] usb 1-2.4.4: reset high-speed USB device number 29 using xhci_hcd
[ 568.860572] usb 1-2.4.4: usbfs: process 4358 (ThreadWeaver::T) did not claim interface 0 before use
[ 568.940321] usb 1-2.4.4: reset high-speed USB device number 29 using xhci_hcd
[ 569.032526] usb 1-2.4.4: usbfs: process 4360 (ThreadWeaver::T) did not claim interface 0 before use
[ 569.072917] usb 1-2.4.3: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 569.073081] usb 1-2.4.4: USB disconnect, device number 29
[ 569.149367] usb 1-2.4.3: reset high-speed USB device number 30 using xhci_hcd
[ 569.240541] usb 1-2.4.3: usbfs: process 4277 (ThreadWeaver::T) did not claim interface 0 before use
[ 569.240579] usb 1-2.4.3: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 569.240615] usb 1-2.4.3: usbfs: process 4359 (ThreadWeaver::T) did not claim interface 0 before use
[ 569.240651] usb 1-2.4.3: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 569.318026] usb 1-2.4.4: new high-speed USB device number 31 using xhci_hcd
[ 569.411867] usb 1-2.4.4: New USB device found, idVendor=05c6, idProduct=9039
[ 569.411870] usb 1-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 569.411871] usb 1-2.4.4: Product: Android
[ 569.411873] usb 1-2.4.4: Manufacturer: Android
[ 569.411874] usb 1-2.4.4: SerialNumber: XH035553
[ 569.490370] usb 1-2.4.3: reset high-speed USB device number 30 using xhci_hcd
[ 569.662349] usb 1-2.4.3: reset high-speed USB device number 30 using xhci_hcd
[ 569.755697] usb 1-2.4.4: usbfs: process 4178 (ThreadWeaver::T) did not claim interface 0 before use
[ 569.834324] usb 1-2.4.3: reset high-speed USB device number 30 using xhci_hcd
[ 569.930448] usb 1-2.4.3: usbfs: process 4277 (ThreadWeaver::T) did not claim interface 0 before use
[ 569.930584] usb 1-2.4.3: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 570.007395] usb 1-2.4.4: reset high-speed USB device number 31 using xhci_hcd
[ 570.100594] usb 1-2.4.4: usbfs: process 4178 (ThreadWeaver::T) did not claim interface 0 before use
[ 570.100634] usb 1-2.4.4: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 570.100687] usb 1-2.4.4: usbfs: process 4164 (ThreadWeaver::T) did not claim interface 0 before use
[ 570.100772] usb 1-2.4.3: usbfs: process 4359 (ThreadWeaver::T) did not claim interface 0 before use
[ 570.180376] usb 1-2.4.4: reset high-speed USB device number 31 using xhci_hcd
[ 570.350383] usb 1-2.4.3: reset high-speed USB device number 30 using xhci_hcd
[ 570.521388] usb 1-2.4.4: reset high-speed USB device number 31 using xhci_hcd
[ 570.613447] usb 1-2.4.4: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 570.613492] usb 1-2.4.4: usbfs: process 4164 (ThreadWeaver::T) did not claim interface 0 before use
[ 570.613521] usb 1-2.4.4: usbfs: process 4178 (ThreadWeaver::T) did not claim interface 0 before use
[ 570.613560] usb 1-2.4.4: usbfs: process 4164 (ThreadWeaver::T) did not claim interface 0 before use
[ 570.693369] usb 1-2.4.4: reset high-speed USB device number 31 using xhci_hcd
[ 570.825836] usb 1-2.4.4: USB disconnect, device number 31
[ 570.889400] usb 1-2.4.3: reset high-speed USB device number 30 using xhci_hcd
[ 570.980795] usb 1-2.4.3: usbfs: process 4277 (ThreadWeaver::T) did not claim interface 0 before use
[ 570.980885] usb 1-2.4.3: usbfs: process 4178 (ThreadWeaver::T) did not claim interface 0 before use
[ 570.980910] usb 1-2.4.3: usbfs: process 4164 (ThreadWeaver::T) did not claim interface 0 before use
[ 571.048593] usb 1-2.4.3: USB disconnect, device number 30
[ 571.235087] usb 1-2.4.3: new high-speed USB device number 32 using xhci_hcd
[ 571.326857] usb 1-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 571.326859] usb 1-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 571.326860] usb 1-2.4.3: Product: Android
[ 571.326860] usb 1-2.4.3: Manufacturer: Android
[ 571.326861] usb 1-2.4.3: SerialNumber: XH023891
[ 571.339846] usb 1-2.4.3: usbfs: process 4356 (ThreadWeaver::T) did not claim interface 0 before use
[ 571.416382] usb 1-2.4.3: reset high-speed USB device number 32 using xhci_hcd
[ 571.442091] usb 1-2.4.3: USB disconnect, device number 32
[ 571.627120] usb 1-2.4.3: new high-speed USB device number 33 using xhci_hcd
[ 571.718808] usb 1-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 571.718812] usb 1-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 571.718814] usb 1-2.4.3: Product: Android
[ 571.718815] usb 1-2.4.3: Manufacturer: Android
[ 571.718817] usb 1-2.4.3: SerialNumber: XH023891
[ 571.731685] usb 1-2.4.3: usbfs: process 4359 (ThreadWeaver::T) did not claim interface 0 before use
[ 571.808438] usb 1-2.4.3: reset high-speed USB device number 33 using xhci_hcd
[ 571.900480] usb 1-2.4.3: usbfs: process 4359 (ThreadWeaver::T) did not claim interface 0 before use
[ 571.982428] usb 1-2.4.3: reset high-speed USB device number 33 using xhci_hcd
[ 572.008103] usb 1-2.4.3: USB disconnect, device number 33
[ 572.194157] usb 1-2.4.3: new high-speed USB device number 34 using xhci_hcd
[ 572.288888] usb 1-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 572.288891] usb 1-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 572.288893] usb 1-2.4.3: Product: Android
[ 572.288894] usb 1-2.4.3: Manufacturer: Android
[ 572.288895] usb 1-2.4.3: SerialNumber: XH023891
[ 572.306258] usb 1-2.4.3: usbfs: process 4357 (ThreadWeaver::T) did not claim interface 0 before use
[ 572.383469] usb 1-2.4.3: reset high-speed USB device number 34 using xhci_hcd
[ 572.476711] usb 1-2.4.3: usbfs: process 4357 (ThreadWeaver::T) did not claim interface 0 before use
[ 572.554438] usb 1-2.4.3: reset high-speed USB device number 34 using xhci_hcd
[ 572.645702] usb 1-2.4.3: usbfs: process 4357 (ThreadWeaver::T) did not claim interface 0 before use
[ 572.723493] usb 1-2.4.3: reset high-speed USB device number 34 using xhci_hcd
[ 573.391178] usb 1-2.4.3: USB disconnect, device number 34
[ 608.247221] usb 1-2: USB disconnect, device number 16
[ 608.247224] usb 1-2.4: USB disconnect, device number 17
[ 609.351212] usb 2-2: USB disconnect, device number 4
[ 609.351215] usb 2-2.4: USB disconnect, device number 5
[ 610.970212] usb 3-2: new high-speed USB device number 5 using ehci-pci
[ 611.092610] usb 3-2: New USB device found, idVendor=2109, idProduct=2812
[ 611.092612] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 611.092614] usb 3-2: Product: USB2.0 Hub
[ 611.092615] usb 3-2: Manufacturer: VIA Labs, Inc.
[ 611.093018] hub 3-2:1.0: USB hub found
[ 611.093354] hub 3-2:1.0: 4 ports detected
[ 611.388242] usb 3-2.4: new high-speed USB device number 6 using ehci-pci
[ 611.483071] usb 3-2.4: New USB device found, idVendor=2109, idProduct=2812
[ 611.483074] usb 3-2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 611.483076] usb 3-2.4: Product: USB2.0 Hub
[ 611.483077] usb 3-2.4: Manufacturer: VIA Labs, Inc.
[ 611.483636] hub 3-2.4:1.0: USB hub found
[ 611.483946] hub 3-2.4:1.0: 4 ports detected
[ 678.209374] usb 3-2.4.4: new high-speed USB device number 7 using ehci-pci
[ 678.303386] usb 3-2.4.4: New USB device found, idVendor=05c6, idProduct=9039
[ 678.303389] usb 3-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 678.303390] usb 3-2.4.4: Product: Android
[ 678.303391] usb 3-2.4.4: Manufacturer: Android
[ 678.303392] usb 3-2.4.4: SerialNumber: XH035553
[ 678.314597] usb 3-2.4.4: usbfs: process 4276 (ThreadWeaver::T) did not claim interface 0 before use
[ 678.346886] usb 3-2.4.4: USB disconnect, device number 7
[ 678.535380] usb 3-2.4.4: new high-speed USB device number 8 using ehci-pci
[ 678.628609] usb 3-2.4.4: New USB device found, idVendor=05c6, idProduct=9039
[ 678.628612] usb 3-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 678.628613] usb 3-2.4.4: Product: Android
[ 678.628615] usb 3-2.4.4: Manufacturer: Android
[ 678.628616] usb 3-2.4.4: SerialNumber: XH035553
[ 678.639448] usb 3-2.4.4: usbfs: process 4164 (ThreadWeaver::T) did not claim interface 0 before use
[ 678.725412] usb 3-2.4.4: reset high-speed USB device number 8 using ehci-pci
[ 678.819754] usb 3-2.4.4: usbfs: process 4164 (ThreadWeaver::T) did not claim interface 0 before use
[ 678.900391] usb 3-2.4.4: reset high-speed USB device number 8 using ehci-pci
[ 678.993485] usb 3-2.4.4: usbfs: process 4164 (ThreadWeaver::T) did not claim interface 0 before use
[ 679.073394] usb 3-2.4.4: reset high-speed USB device number 8 using ehci-pci
[ 679.126563] usb 3-2.4.4: USB disconnect, device number 8
[ 679.316445] usb 3-2.4.4: new high-speed USB device number 9 using ehci-pci
[ 679.409782] usb 3-2.4.4: New USB device found, idVendor=05c6, idProduct=9039
[ 679.409784] usb 3-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 679.409786] usb 3-2.4.4: Product: Android
[ 679.409787] usb 3-2.4.4: Manufacturer: Android
[ 679.409788] usb 3-2.4.4: SerialNumber: XH035553
[ 679.423976] usb 3-2.4.4: usbfs: process 4343 (ThreadWeaver::T) did not claim interface 0 before use
[ 679.504421] usb 3-2.4.4: reset high-speed USB device number 9 using ehci-pci
[ 679.599078] usb 3-2.4.4: usbfs: process 4343 (ThreadWeaver::T) did not claim interface 0 before use
[ 679.599256] usb 3-2.4.4: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 679.679412] usb 3-2.4.4: reset high-speed USB device number 9 using ehci-pci
[ 679.772429] usb 3-2.4.4: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 679.772506] usb 3-2.4.4: usbfs: process 4343 (ThreadWeaver::T) did not claim interface 0 before use
[ 679.854417] usb 3-2.4.4: reset high-speed USB device number 9 using ehci-pci
[ 679.947936] usb 3-2.4.4: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 679.948123] usb 3-2.4.4: usbfs: process 4343 (ThreadWeaver::T) did not claim interface 0 before use
[ 680.026436] usb 3-2.4.4: reset high-speed USB device number 9 using ehci-pci
[ 695.874987] usb 3-2.4.3: new high-speed USB device number 10 using ehci-pci
[ 695.969092] usb 3-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 695.969095] usb 3-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 695.969096] usb 3-2.4.3: Product: Android
[ 695.969097] usb 3-2.4.3: Manufacturer: Android
[ 695.969098] usb 3-2.4.3: SerialNumber: XH023891
[ 695.983045] usb 3-2.4.3: usbfs: process 4276 (ThreadWeaver::T) did not claim interface 0 before use
[ 696.064975] usb 3-2.4.3: reset high-speed USB device number 10 using ehci-pci
[ 696.159350] usb 3-2.4.3: usbfs: process 4276 (ThreadWeaver::T) did not claim interface 0 before use
[ 696.241045] usb 3-2.4.3: reset high-speed USB device number 10 using ehci-pci
[ 696.334056] usb 3-2.4.3: usbfs: process 4360 (ThreadWeaver::T) did not claim interface 0 before use
[ 696.417022] usb 3-2.4.3: reset high-speed USB device number 10 using ehci-pci
[ 696.467951] usb 3-2.4.4: usbfs: process 4360 (ThreadWeaver::T) did not claim interface 0 before use
[ 696.467959] usb 3-2.4.4: usbfs: process 4276 (ThreadWeaver::T) did not claim interface 0 before use
[ 696.468042] usb 3-2.4.3: USB disconnect, device number 10
[ 696.546011] usb 3-2.4.4: reset high-speed USB device number 9 using ehci-pci
[ 696.717038] usb 3-2.4.3: new high-speed USB device number 11 using ehci-pci
[ 696.813011] usb 3-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 696.813013] usb 3-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 696.813014] usb 3-2.4.3: Product: Android
[ 696.813014] usb 3-2.4.3: Manufacturer: Android
[ 696.813015] usb 3-2.4.3: SerialNumber: XH023891
[ 696.828589] usb 3-2.4.3: usbfs: process 4177 (ThreadWeaver::T) did not claim interface 0 before use
[ 696.890006] usb 3-2.4.4: reset high-speed USB device number 9 using ehci-pci
[ 696.983020] usb 3-2.4.4: usbfs: process 4276 (ThreadWeaver::T) did not claim interface 0 before use
[ 696.983079] usb 3-2.4.4: usbfs: process 4360 (ThreadWeaver::T) did not claim interface 0 before use
[ 696.983127] usb 3-2.4.4: usbfs: process 4360 (ThreadWeaver::T) did not claim interface 0 before use
[ 697.060018] usb 3-2.4.3: reset high-speed USB device number 11 using ehci-pci
[ 697.154640] usb 3-2.4.3: usbfs: process 4177 (ThreadWeaver::T) did not claim interface 0 before use
[ 697.193629] usb 3-2.4.4: USB disconnect, device number 9
[ 697.382019] usb 3-2.4.4: new high-speed USB device number 12 using ehci-pci
[ 697.476834] usb 3-2.4.4: New USB device found, idVendor=05c6, idProduct=9039
[ 697.476838] usb 3-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 697.476840] usb 3-2.4.4: Product: Android
[ 697.476842] usb 3-2.4.4: Manufacturer: Android
[ 697.476844] usb 3-2.4.4: SerialNumber: XH035553
[ 697.479207] usb 3-2.4.3: USB disconnect, device number 11
[ 697.666022] usb 3-2.4.3: new high-speed USB device number 13 using ehci-pci
[ 697.759433] usb 3-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 697.759436] usb 3-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 697.759437] usb 3-2.4.3: Product: Android
[ 697.759438] usb 3-2.4.3: Manufacturer: Android
[ 697.759439] usb 3-2.4.3: SerialNumber: XH023891
[ 697.777082] usb 3-2.4.3: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 697.809332] usb 3-2.4.4: usbfs: process 4164 (ThreadWeaver::T) did not claim interface 0 before use
[ 697.809349] usb 3-2.4.4: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 697.810057] usb 3-2.4.3: USB disconnect, device number 13
[ 697.891031] usb 3-2.4.4: reset high-speed USB device number 12 using ehci-pci
[ 697.984071] usb 3-2.4.4: usbfs: process 4164 (ThreadWeaver::T) did not claim interface 0 before use
[ 698.061047] usb 3-2.4.3: new high-speed USB device number 14 using ehci-pci
[ 698.155264] usb 3-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 698.155267] usb 3-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 698.155269] usb 3-2.4.3: Product: Android
[ 698.155270] usb 3-2.4.3: Manufacturer: Android
[ 698.155271] usb 3-2.4.3: SerialNumber: XH023891
[ 698.232097] usb 3-2.4.4: reset high-speed USB device number 12 using ehci-pci
[ 698.326811] usb 3-2.4.4: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 698.327188] usb 3-2.4.3: usbfs: process 4359 (ThreadWeaver::T) did not claim interface 0 before use
[ 698.327242] usb 3-2.4.3: usbfs: process 4276 (ThreadWeaver::T) did not claim interface 0 before use
[ 698.367122] usb 3-2.4.3: USB disconnect, device number 14
[ 698.431090] usb 3-2.4.4: reset high-speed USB device number 12 using ehci-pci
[ 698.526620] usb 3-2.4.4: usbfs: process 4164 (ThreadWeaver::T) did not claim interface 0 before use
[ 698.526693] usb 3-2.4.4: usbfs: process 4358 (ThreadWeaver::T) did not claim interface 0 before use
[ 698.526715] usb 3-2.4.4: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 698.605053] usb 3-2.4.3: new high-speed USB device number 15 using ehci-pci
[ 698.697592] usb 3-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 698.697596] usb 3-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 698.697598] usb 3-2.4.3: Product: Android
[ 698.697600] usb 3-2.4.3: Manufacturer: Android
[ 698.697602] usb 3-2.4.3: SerialNumber: XH023891
[ 698.774119] usb 3-2.4.4: reset high-speed USB device number 12 using ehci-pci
[ 698.946081] usb 3-2.4.4: reset high-speed USB device number 12 using ehci-pci
[ 699.039974] usb 3-2.4.4: usbfs: process 4358 (ThreadWeaver::T) did not claim interface 0 before use
[ 699.040008] usb 3-2.4.4: usbfs: process 4191 (ThreadWeaver::T) did not claim interface 0 before use
[ 699.040079] usb 3-2.4.4: usbfs: process 4277 (ThreadWeaver::T) did not claim interface 0 before use
[ 699.040307] usb 3-2.4.3: usbfs: process 4361 (ThreadWeaver::T) did not claim interface 0 before use
[ 699.040312] usb 3-2.4.3: usbfs: process 4357 (ThreadWeaver::T) did not claim interface 0 before use
[ 699.118115] usb 3-2.4.3: reset high-speed USB device number 15 using ehci-pci
[ 699.251553] usb 3-2.4.4: USB disconnect, device number 12
[ 699.439122] usb 3-2.4.4: new high-speed USB device number 16 using ehci-pci
[ 699.535881] usb 3-2.4.4: New USB device found, idVendor=05c6, idProduct=9039
[ 699.535883] usb 3-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 699.535884] usb 3-2.4.4: Product: Android
[ 699.535886] usb 3-2.4.4: Manufacturer: Android
[ 699.535886] usb 3-2.4.4: SerialNumber: XH035553
[ 699.537626] usb 3-2.4.3: USB disconnect, device number 15
[ 699.724143] usb 3-2.4.3: new high-speed USB device number 17 using ehci-pci
[ 699.819235] usb 3-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 699.819240] usb 3-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 699.819242] usb 3-2.4.3: Product: Android
[ 699.819244] usb 3-2.4.3: Manufacturer: Android
[ 699.819246] usb 3-2.4.3: SerialNumber: XH023891
[ 699.826116] usb 3-2.4.3: usbfs: process 4178 (ThreadWeaver::T) did not claim interface 0 before use
[ 699.861444] usb 3-2.4.4: usbfs: process 4177 (ThreadWeaver::T) did not claim interface 0 before use
[ 699.862103] usb 3-2.4.3: USB disconnect, device number 17
[ 699.942159] usb 3-2.4.4: reset high-speed USB device number 16 using ehci-pci
[ 700.035234] usb 3-2.4.4: usbfs: process 4359 (ThreadWeaver::T) did not claim interface 0 before use
[ 700.035331] usb 3-2.4.4: usbfs: process 4178 (ThreadWeaver::T) did not claim interface 0 before use
[ 700.035377] usb 3-2.4.4: usbfs: process 4177 (ThreadWeaver::T) did not claim interface 0 before use
[ 700.035381] usb 3-2.4.4: usbfs: process 4360 (ThreadWeaver::T) did not claim interface 0 before use
[ 700.112142] usb 3-2.4.3: new high-speed USB device number 18 using ehci-pci
[ 700.205450] usb 3-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 700.205455] usb 3-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 700.205457] usb 3-2.4.3: Product: Android
[ 700.205459] usb 3-2.4.3: Manufacturer: Android
[ 700.205461] usb 3-2.4.3: SerialNumber: XH023891
[ 700.282123] usb 3-2.4.4: reset high-speed USB device number 16 using ehci-pci
[ 700.374955] usb 3-2.4.4: usbfs: process 4178 (ThreadWeaver::T) did not claim interface 0 before use
[ 700.374979] usb 3-2.4.4: usbfs: process 4177 (ThreadWeaver::T) did not claim interface 0 before use
[ 700.457109] usb 3-2.4.4: reset high-speed USB device number 16 using ehci-pci
[ 700.508580] usb 3-2.4.3: usbfs: process 4343 (ThreadWeaver::T) did not claim interface 0 before use
[ 700.508720] usb 3-2.4.3: usbfs: process 4191 (ThreadWeaver::T) did not claim interface 0 before use
[ 700.508924] usb 3-2.4.4: USB disconnect, device number 16
[ 700.589158] usb 3-2.4.3: reset high-speed USB device number 18 using ehci-pci
[ 700.762162] usb 3-2.4.4: new high-speed USB device number 19 using ehci-pci
[ 700.856509] usb 3-2.4.4: New USB device found, idVendor=05c6, idProduct=9039
[ 700.856511] usb 3-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 700.856513] usb 3-2.4.4: Product: Android
[ 700.856514] usb 3-2.4.4: Manufacturer: Android
[ 700.856515] usb 3-2.4.4: SerialNumber: XH035553
[ 700.933137] usb 3-2.4.3: reset high-speed USB device number 18 using ehci-pci
[ 701.026778] usb 3-2.4.3: usbfs: process 4191 (ThreadWeaver::T) did not claim interface 0 before use
[ 701.026820] usb 3-2.4.3: usbfs: process 4343 (ThreadWeaver::T) did not claim interface 0 before use
[ 701.027043] usb 3-2.4.4: usbfs: process 4361 (ThreadWeaver::T) did not claim interface 0 before use
[ 701.067738] usb 3-2.4.4: USB disconnect, device number 19
[ 701.132176] usb 3-2.4.3: reset high-speed USB device number 18 using ehci-pci
[ 701.224620] usb 3-2.4.3: usbfs: process 4343 (ThreadWeaver::T) did not claim interface 0 before use
[ 701.302197] usb 3-2.4.4: new high-speed USB device number 20 using ehci-pci
[ 701.395489] usb 3-2.4.4: New USB device found, idVendor=05c6, idProduct=9039
[ 701.395494] usb 3-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 701.395496] usb 3-2.4.4: Product: Android
[ 701.395498] usb 3-2.4.4: Manufacturer: Android
[ 701.395500] usb 3-2.4.4: SerialNumber: XH035553
[ 701.473173] usb 3-2.4.3: reset high-speed USB device number 18 using ehci-pci
[ 701.567339] usb 3-2.4.3: usbfs: process 4191 (ThreadWeaver::T) did not claim interface 0 before use
[ 701.567505] usb 3-2.4.3: usbfs: process 4276 (ThreadWeaver::T) did not claim interface 0 before use
[ 701.567702] usb 3-2.4.4: usbfs: process 4358 (ThreadWeaver::T) did not claim interface 0 before use
[ 701.646180] usb 3-2.4.3: reset high-speed USB device number 18 using ehci-pci
[ 701.817202] usb 3-2.4.4: reset high-speed USB device number 20 using ehci-pci
[ 701.911829] usb 3-2.4.4: usbfs: process 4358 (ThreadWeaver::T) did not claim interface 0 before use
[ 701.911878] usb 3-2.4.4: usbfs: process 4177 (ThreadWeaver::T) did not claim interface 0 before use
[ 701.988178] usb 3-2.4.3: reset high-speed USB device number 18 using ehci-pci
[ 702.082066] usb 3-2.4.3: usbfs: process 4357 (ThreadWeaver::T) did not claim interface 0 before use
[ 702.159202] usb 3-2.4.4: reset high-speed USB device number 20 using ehci-pci
[ 702.253287] usb 3-2.4.4: usbfs: process 4177 (ThreadWeaver::T) did not claim interface 0 before use
[ 702.330198] usb 3-2.4.3: reset high-speed USB device number 18 using ehci-pci
[ 702.423146] usb 3-2.4.3: usbfs: process 4357 (ThreadWeaver::T) did not claim interface 0 before use
[ 702.423304] usb 3-2.4.3: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 702.423360] usb 3-2.4.3: usbfs: process 4361 (ThreadWeaver::T) did not claim interface 0 before use
[ 702.501225] usb 3-2.4.4: reset high-speed USB device number 20 using ehci-pci
[ 702.595154] usb 3-2.4.4: usbfs: process 4358 (ThreadWeaver::T) did not claim interface 0 before use
[ 702.595186] usb 3-2.4.4: usbfs: process 4177 (ThreadWeaver::T) did not claim interface 0 before use
[ 702.673188] usb 3-2.4.3: reset high-speed USB device number 18 using ehci-pci
[ 702.843240] usb 3-2.4.4: reset high-speed USB device number 20 using ehci-pci
[ 703.013227] usb 3-2.4.3: reset high-speed USB device number 18 using ehci-pci
[ 703.108066] usb 3-2.4.3: usbfs: process 4276 (ThreadWeaver::T) did not claim interface 0 before use
[ 703.108129] usb 3-2.4.3: usbfs: process 4191 (ThreadWeaver::T) did not claim interface 0 before use
[ 703.108136] usb 3-2.4.3: usbfs: process 4357 (ThreadWeaver::T) did not claim interface 0 before use
[ 703.108155] usb 3-2.4.3: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 703.108171] usb 3-2.4.3: usbfs: process 4361 (ThreadWeaver::T) did not claim interface 0 before use
[ 703.108247] usb 3-2.4.3: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 703.185220] usb 3-2.4.4: reset high-speed USB device number 20 using ehci-pci
[ 703.358234] usb 3-2.4.3: reset high-speed USB device number 18 using ehci-pci
[ 703.530267] usb 3-2.4.3: reset high-speed USB device number 18 using ehci-pci
[ 703.581348] usb 3-2.4.4: usbfs: process 4358 (ThreadWeaver::T) did not claim interface 0 before use
[ 703.581459] usb 3-2.4.4: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 703.582250] usb 3-2.4.3: USB disconnect, device number 18
[ 703.663261] usb 3-2.4.4: reset high-speed USB device number 20 using ehci-pci
[ 703.832294] usb 3-2.4.3: new high-speed USB device number 21 using ehci-pci
[ 703.925350] usb 3-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 703.925354] usb 3-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 703.925356] usb 3-2.4.3: Product: Android
[ 703.925358] usb 3-2.4.3: Manufacturer: Android
[ 703.925360] usb 3-2.4.3: SerialNumber: XH023891
[ 703.938438] usb 3-2.4.3: usbfs: process 4277 (ThreadWeaver::T) did not claim interface 0 before use
[ 703.971643] usb 3-2.4.4: usbfs: process 4276 (ThreadWeaver::T) did not claim interface 0 before use
[ 703.985088] usb 3-2.4.3: USB disconnect, device number 21
[ 704.050307] usb 3-2.4.4: reset high-speed USB device number 20 using ehci-pci
[ 704.142365] usb 3-2.4.4: usbfs: process 4276 (ThreadWeaver::T) did not claim interface 0 before use
[ 704.142537] usb 3-2.4.4: usbfs: process 4359 (ThreadWeaver::T) did not claim interface 0 before use
[ 704.219250] usb 3-2.4.3: new high-speed USB device number 22 using ehci-pci
[ 704.312931] usb 3-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 704.312944] usb 3-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 704.312945] usb 3-2.4.3: Product: Android
[ 704.312946] usb 3-2.4.3: Manufacturer: Android
[ 704.312947] usb 3-2.4.3: SerialNumber: XH023891
[ 704.391326] usb 3-2.4.4: reset high-speed USB device number 20 using ehci-pci
[ 704.485949] usb 3-2.4.4: usbfs: process 4277 (ThreadWeaver::T) did not claim interface 0 before use
[ 704.486080] usb 3-2.4.4: usbfs: process 4359 (ThreadWeaver::T) did not claim interface 0 before use
[ 704.486133] usb 3-2.4.4: usbfs: process 4359 (ThreadWeaver::T) did not claim interface 0 before use
[ 704.486530] usb 3-2.4.3: usbfs: process 4357 (ThreadWeaver::T) did not claim interface 0 before use
[ 704.564292] usb 3-2.4.3: reset high-speed USB device number 22 using ehci-pci
[ 704.658055] usb 3-2.4.3: usbfs: process 4357 (ThreadWeaver::T) did not claim interface 0 before use
[ 704.658109] usb 3-2.4.3: usbfs: process 4177 (ThreadWeaver::T) did not claim interface 0 before use
[ 704.658130] usb 3-2.4.3: usbfs: process 4361 (ThreadWeaver::T) did not claim interface 0 before use
[ 704.735277] usb 3-2.4.4: reset high-speed USB device number 20 using ehci-pci
[ 704.828529] usb 3-2.4.4: usbfs: process 4276 (ThreadWeaver::T) did not claim interface 0 before use
[ 704.904286] usb 3-2.4.3: reset high-speed USB device number 22 using ehci-pci
[ 704.998772] usb 3-2.4.3: usbfs: process 4177 (ThreadWeaver::T) did not claim interface 0 before use
[ 705.037740] usb 3-2.4.4: USB disconnect, device number 20
[ 705.222320] usb 3-2.4.4: new high-speed USB device number 23 using ehci-pci
[ 705.318089] usb 3-2.4.4: New USB device found, idVendor=05c6, idProduct=9039
[ 705.318092] usb 3-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 705.318094] usb 3-2.4.4: Product: Android
[ 705.318096] usb 3-2.4.4: Manufacturer: Android
[ 705.318097] usb 3-2.4.4: SerialNumber: XH035553
[ 705.319714] usb 3-2.4.3: USB disconnect, device number 22
[ 705.510353] usb 3-2.4.3: new high-speed USB device number 24 using ehci-pci
[ 705.603686] usb 3-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 705.603689] usb 3-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 705.603691] usb 3-2.4.3: Product: Android
[ 705.603692] usb 3-2.4.3: Manufacturer: Android
[ 705.603693] usb 3-2.4.3: SerialNumber: XH023891
[ 705.619741] usb 3-2.4.3: usbfs: process 4356 (ThreadWeaver::T) did not claim interface 0 before use
[ 705.699350] usb 3-2.4.3: reset high-speed USB device number 24 using ehci-pci
[ 705.792716] usb 3-2.4.3: usbfs: process 4356 (ThreadWeaver::T) did not claim interface 0 before use
[ 705.872325] usb 3-2.4.3: reset high-speed USB device number 24 using ehci-pci
[ 705.965501] usb 3-2.4.3: usbfs: process 4356 (ThreadWeaver::T) did not claim interface 0 before use
[ 705.965568] usb 3-2.4.3: usbfs: process 4343 (ThreadWeaver::T) did not claim interface 0 before use
[ 705.965571] usb 3-2.4.3: usbfs: process 4276 (ThreadWeaver::T) did not claim interface 0 before use
[ 706.052363] usb 3-2.4.3: reset high-speed USB device number 24 using ehci-pci
[ 706.226324] usb 3-2.4.3: reset high-speed USB device number 24 using ehci-pci
[ 706.319406] usb 3-2.4.3: usbfs: process 4164 (ThreadWeaver::T) did not claim interface 0 before use
[ 706.405364] usb 3-2.4.3: reset high-speed USB device number 24 using ehci-pci
[ 706.456849] usb 3-2.4.3: USB disconnect, device number 24
[ 706.457255] usb 3-2.4.4: usbfs: process 4343 (ThreadWeaver::T) did not claim interface 0 before use
[ 706.457270] usb 3-2.4.4: usbfs: process 4356 (ThreadWeaver::T) did not claim interface 0 before use
[ 706.641333] usb 3-2.4.3: new high-speed USB device number 25 using ehci-pci
[ 706.734573] usb 3-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 706.734575] usb 3-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 706.734576] usb 3-2.4.3: Product: Android
[ 706.734577] usb 3-2.4.3: Manufacturer: Android
[ 706.734577] usb 3-2.4.3: SerialNumber: XH023891
[ 706.736446] usb 3-2.4.4: USB disconnect, device number 23
[ 706.923349] usb 3-2.4.4: new high-speed USB device number 26 using ehci-pci
[ 707.017183] usb 3-2.4.4: New USB device found, idVendor=05c6, idProduct=9039
[ 707.017188] usb 3-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 707.017191] usb 3-2.4.4: Product: Android
[ 707.017193] usb 3-2.4.4: Manufacturer: Android
[ 707.017196] usb 3-2.4.4: SerialNumber: XH035553
[ 707.033657] usb 3-2.4.3: usbfs: process 4359 (ThreadWeaver::T) did not claim interface 0 before use
[ 707.038010] usb 3-2.4.4: usbfs: process 4343 (ThreadWeaver::T) did not claim interface 0 before use
[ 707.077295] usb 3-2.4.3: USB disconnect, device number 25
[ 707.141378] usb 3-2.4.4: reset high-speed USB device number 26 using ehci-pci
[ 707.235569] usb 3-2.4.4: usbfs: process 4343 (ThreadWeaver::T) did not claim interface 0 before use
[ 707.313359] usb 3-2.4.3: new high-speed USB device number 27 using ehci-pci
[ 707.406639] usb 3-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 707.406642] usb 3-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 707.406643] usb 3-2.4.3: Product: Android
[ 707.406644] usb 3-2.4.3: Manufacturer: Android
[ 707.406645] usb 3-2.4.3: SerialNumber: XH023891
[ 707.483374] usb 3-2.4.4: reset high-speed USB device number 26 using ehci-pci
[ 707.577767] usb 3-2.4.4: usbfs: process 4343 (ThreadWeaver::T) did not claim interface 0 before use
[ 707.577815] usb 3-2.4.4: usbfs: process 4361 (ThreadWeaver::T) did not claim interface 0 before use
[ 707.580294] usb 3-2.4.3: usbfs: process 4178 (ThreadWeaver::T) did not claim interface 0 before use
[ 707.659407] usb 3-2.4.4: reset high-speed USB device number 26 using ehci-pci
[ 707.752275] usb 3-2.4.4: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 707.830379] usb 3-2.4.3: reset high-speed USB device number 27 using ehci-pci
[ 707.923411] usb 3-2.4.3: usbfs: process 4178 (ThreadWeaver::T) did not claim interface 0 before use
[ 708.000434] usb 3-2.4.4: reset high-speed USB device number 26 using ehci-pci
[ 708.092381] usb 3-2.4.4: usbfs: process 4361 (ThreadWeaver::T) did not claim interface 0 before use
[ 708.092532] usb 3-2.4.4: usbfs: process 4177 (ThreadWeaver::T) did not claim interface 0 before use
[ 708.092665] usb 3-2.4.3: usbfs: process 4276 (ThreadWeaver::T) did not claim interface 0 before use
[ 708.172423] usb 3-2.4.4: reset high-speed USB device number 26 using ehci-pci
[ 708.266232] usb 3-2.4.4: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 708.343444] usb 3-2.4.3: reset high-speed USB device number 27 using ehci-pci
[ 708.436576] usb 3-2.4.3: usbfs: process 4276 (ThreadWeaver::T) did not claim interface 0 before use
[ 708.475540] usb 3-2.4.4: USB disconnect, device number 26
[ 708.661443] usb 3-2.4.4: new high-speed USB device number 28 using ehci-pci
[ 708.754645] usb 3-2.4.4: New USB device found, idVendor=05c6, idProduct=9039
[ 708.754649] usb 3-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 708.754651] usb 3-2.4.4: Product: Android
[ 708.754653] usb 3-2.4.4: Manufacturer: Android
[ 708.754654] usb 3-2.4.4: SerialNumber: XH035553
[ 708.756396] usb 3-2.4.3: USB disconnect, device number 27
[ 708.944515] usb 3-2.4.3: new high-speed USB device number 29 using ehci-pci
[ 709.038168] usb 3-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 709.038171] usb 3-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 709.038173] usb 3-2.4.3: Product: Android
[ 709.038174] usb 3-2.4.3: Manufacturer: Android
[ 709.038176] usb 3-2.4.3: SerialNumber: XH023891
[ 709.048891] usb 3-2.4.3: usbfs: process 4356 (ThreadWeaver::T) did not claim interface 0 before use
[ 709.134467] usb 3-2.4.3: reset high-speed USB device number 29 using ehci-pci
[ 709.227255] usb 3-2.4.3: usbfs: process 4356 (ThreadWeaver::T) did not claim interface 0 before use
[ 709.273891] usb 3-2.4.4: usbfs: process 4357 (ThreadWeaver::T) did not claim interface 0 before use
[ 709.274212] usb 3-2.4.3: USB disconnect, device number 29
[ 709.357443] usb 3-2.4.4: reset high-speed USB device number 28 using ehci-pci
[ 709.451623] usb 3-2.4.4: usbfs: process 4357 (ThreadWeaver::T) did not claim interface 0 before use
[ 709.451694] usb 3-2.4.4: usbfs: process 4191 (ThreadWeaver::T) did not claim interface 0 before use
[ 709.451702] usb 3-2.4.4: usbfs: process 4357 (ThreadWeaver::T) did not claim interface 0 before use
[ 709.451780] usb 3-2.4.4: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 709.528430] usb 3-2.4.3: new high-speed USB device number 30 using ehci-pci
[ 709.621684] usb 3-2.4.3: New USB device found, idVendor=05c6, idProduct=9039
[ 709.621687] usb 3-2.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 709.621689] usb 3-2.4.3: Product: Android
[ 709.621690] usb 3-2.4.3: Manufacturer: Android
[ 709.621692] usb 3-2.4.3: SerialNumber: XH023891
[ 709.698432] usb 3-2.4.4: reset high-speed USB device number 28 using ehci-pci
[ 709.873515] usb 3-2.4.4: reset high-speed USB device number 28 using ehci-pci
[ 709.967676] usb 3-2.4.4: usbfs: process 4344 (ThreadWeaver::T) did not claim interface 0 before use
[ 710.050510] usb 3-2.4.4: reset high-speed USB device number 28 using ehci-pci
[ 710.144661] usb 3-2.4.4: usbfs: process 4191 (ThreadWeaver::T) did not claim interface 0 before use
[ 710.226475] usb 3-2.4.4: reset high-speed USB device number 28 using ehci-pci
[ 710.278052] usb 3-2.4.3: usbfs: process 4277 (ThreadWeaver::T) did not claim interface 0 before use
[ 710.278099] usb 3-2.4.3: usbfs: process 4360 (ThreadWeaver::T) did not claim interface 0 before use
[ 710.278628] usb 3-2.4.4: USB disconnect, device number 28
[ 710.360472] usb 3-2.4.3: reset high-speed USB device number 30 using ehci-pci
[ 710.530487] usb 3-2.4.4: new high-speed USB device number 31 using ehci-pci
[ 710.623974] usb 3-2.4.4: New USB device found, idVendor=05c6, idProduct=9039
[ 710.623982] usb 3-2.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 710.623987] usb 3-2.4.4: Product: Android
[ 710.623992] usb 3-2.4.4: Manufacturer: Android
[ 710.623996] usb 3-2.4.4: SerialNumber: XH035553
[ 710.700522] usb 3-2.4.3: reset high-speed USB device number 30 using ehci-pci
[ 711.372971] usb 3-2.4.4: usbfs: process 4177 (ThreadWeaver::T) did not claim interface 0 before use
[ 711.372992] usb 3-2.4.4: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 711.373263] usb 3-2.4.3: USB disconnect, device number 30
[ 711.453514] usb 3-2.4.4: reset high-speed USB device number 31 using ehci-pci
[ 711.624547] usb 3-2.4.4: reset high-speed USB device number 31 using ehci-pci
[ 711.717762] usb 3-2.4.4: usbfs: process 4177 (ThreadWeaver::T) did not claim interface 0 before use
[ 711.717804] usb 3-2.4.4: usbfs: process 4275 (ThreadWeaver::T) did not claim interface 0 before use
[ 712.413174] usb 3-2.4.4: USB disconnect, device number 31
Thanks.
--
Thomas Fjellstrom
thomas@fjellstrom.ca
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Asmedia USB 1343 crashes
2017-05-01 16:20 ` Thomas Fjellstrom
@ 2017-05-01 17:57 ` Alan Stern
2017-05-01 18:08 ` Thomas Fjellstrom
0 siblings, 1 reply; 12+ messages in thread
From: Alan Stern @ 2017-05-01 17:57 UTC (permalink / raw)
To: Thomas Fjellstrom; +Cc: linux-usb, LKML
On Mon, 1 May 2017, Thomas Fjellstrom wrote:
> On Monday, May 1, 2017 10:54:12 AM MDT Alan Stern wrote:
> > On Mon, 1 May 2017, Thomas Fjellstrom wrote:
> > > I've got a 970 Pro gaming aura motherboard with an Asmedia 1343 Usb 3.1
> > > controller. It's been consistently throwing errors and eventually crashing
> > > and becomming unresponsive.
> >
> > Maybe if you posted a kernel log showing those errors, people would
> > have a better idea of what's causing your problems.
>
> I was going to, but it seems I lost my previous log. I've searched through the
> system logs and haven't found a good clean set of logs, but I'll post what I
> have (at end of message), and later re-test with autosuspend on.
>
> > > Even just plugging in one device to the rear port will eventually cause
> > > the
> > > controller to die. Usually only takes a few hours for it to completely
> > > die.
> > >
> > >
> > > One of the errors that shows up consistently is:
> > >
> > > usbfs: process did not claim interface 0 before use
> >
> > This warning message is not related to the Asmedia controller. It
> > refers to some program running on the computer, and the same message
> > would appear no matter what sort of controller was being used.
>
> Ah. I figured since it was a kernel message, it was directly connected to the
> issues.
>
> > Alan Stern
> >
> [snip]
...
> [ 81.609260] usb 1-1.4: new high-speed USB device number 3 using xhci_hcd
> [ 81.701710] usb 1-1.4: New USB device found, idVendor=2109, idProduct=2812
> [ 81.701713] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 81.701716] usb 1-1.4: Product: USB2.0 Hub
> [ 81.701717] usb 1-1.4: Manufacturer: VIA Labs, Inc.
> [ 81.702643] hub 1-1.4:1.0: USB hub found
> [ 81.702943] hub 1-1.4:1.0: 4 ports detected
> [ 81.918578] usb 2-1.4: new SuperSpeed USB device number 3 using xhci_hcd
> [ 82.166707] usb 2-1.4: New USB device found, idVendor=2109, idProduct=0812
> [ 82.166712] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 82.166714] usb 2-1.4: Product: USB3.0 Hub
> [ 82.166717] usb 2-1.4: Manufacturer: VIA Labs, Inc.
> [ 82.168062] hub 2-1.4:1.0: USB hub found
> [ 82.168743] hub 2-1.4:1.0: 4 ports detected
> [ 103.735979] usb 1-1.4.4: new high-speed USB device number 4 using xhci_hcd
> [ 103.826980] usb 1-1.4.4: New USB device found, idVendor=05c6, idProduct=9039
> [ 103.826985] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 103.826987] usb 1-1.4.4: Product: Android
> [ 103.826989] usb 1-1.4.4: Manufacturer: Android
> [ 103.826992] usb 1-1.4.4: SerialNumber: XH023891
> [ 103.852744] usb 1-1.4.4: usbfs: process 4360 (ThreadWeaver::T) did not claim interface 0 before use
> [ 103.930343] usb 1-1.4.4: reset high-speed USB device number 4 using xhci_hcd
> [ 104.021437] usb 1-1.4.4: usbfs: process 4360 (ThreadWeaver::T) did not claim interface 0 before use
> [ 104.098365] usb 1-1.4.4: reset high-speed USB device number 4 using xhci_hcd
[lots of resets and warnings cut out]
Well, this answers one question: The program not claiming interface 0
is ThreadWeaver::T, whatever that is. This isn't really an error, but
it is sloppy programming. You could report it to the maintainers of
that program.
The log shows a more or less constant series of warnings and resets as
long as the Android device is plugged in. This would explain any
unresponsiveness, although it doesn't explain eventual crashes.
If you know what that ThreadWeaver program is, and if you don't need
it, you could try disabling or removing it to see if the situation
improves.
Alan Stern
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Asmedia USB 1343 crashes
2017-05-01 17:57 ` Alan Stern
@ 2017-05-01 18:08 ` Thomas Fjellstrom
2017-05-03 2:04 ` Thomas Fjellstrom
0 siblings, 1 reply; 12+ messages in thread
From: Thomas Fjellstrom @ 2017-05-01 18:08 UTC (permalink / raw)
To: Alan Stern; +Cc: linux-usb, LKML
On Monday, May 1, 2017 1:57:53 PM MDT Alan Stern wrote:
> On Mon, 1 May 2017, Thomas Fjellstrom wrote:
>
> > On Monday, May 1, 2017 10:54:12 AM MDT Alan Stern wrote:
> > > On Mon, 1 May 2017, Thomas Fjellstrom wrote:
> > > > I've got a 970 Pro gaming aura motherboard with an Asmedia 1343 Usb
3.1
> > > > controller. It's been consistently throwing errors and eventually
crashing
> > > > and becomming unresponsive.
> > >
> > > Maybe if you posted a kernel log showing those errors, people would
> > > have a better idea of what's causing your problems.
> >
> > I was going to, but it seems I lost my previous log. I've searched through
the
> > system logs and haven't found a good clean set of logs, but I'll post what
I
> > have (at end of message), and later re-test with autosuspend on.
> >
> > > > Even just plugging in one device to the rear port will eventually
cause
> > > > the
> > > > controller to die. Usually only takes a few hours for it to completely
> > > > die.
> > > >
> > > >
> > > > One of the errors that shows up consistently is:
> > > >
> > > > usbfs: process did not claim interface 0 before use
> > >
> > > This warning message is not related to the Asmedia controller. It
> > > refers to some program running on the computer, and the same message
> > > would appear no matter what sort of controller was being used.
> >
> > Ah. I figured since it was a kernel message, it was directly connected to
the
> > issues.
> >
> > > Alan Stern
> > >
> > [snip]
> ...
> > [ 81.609260] usb 1-1.4: new high-speed USB device number 3 using
xhci_hcd
> > [ 81.701710] usb 1-1.4: New USB device found, idVendor=2109,
idProduct=2812
> > [ 81.701713] usb 1-1.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
> > [ 81.701716] usb 1-1.4: Product: USB2.0 Hub
> > [ 81.701717] usb 1-1.4: Manufacturer: VIA Labs, Inc.
> > [ 81.702643] hub 1-1.4:1.0: USB hub found
> > [ 81.702943] hub 1-1.4:1.0: 4 ports detected
> > [ 81.918578] usb 2-1.4: new SuperSpeed USB device number 3 using
xhci_hcd
> > [ 82.166707] usb 2-1.4: New USB device found, idVendor=2109,
idProduct=0812
> > [ 82.166712] usb 2-1.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
> > [ 82.166714] usb 2-1.4: Product: USB3.0 Hub
> > [ 82.166717] usb 2-1.4: Manufacturer: VIA Labs, Inc.
> > [ 82.168062] hub 2-1.4:1.0: USB hub found
> > [ 82.168743] hub 2-1.4:1.0: 4 ports detected
> > [ 103.735979] usb 1-1.4.4: new high-speed USB device number 4 using
xhci_hcd
> > [ 103.826980] usb 1-1.4.4: New USB device found, idVendor=05c6,
idProduct=9039
> > [ 103.826985] usb 1-1.4.4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
> > [ 103.826987] usb 1-1.4.4: Product: Android
> > [ 103.826989] usb 1-1.4.4: Manufacturer: Android
> > [ 103.826992] usb 1-1.4.4: SerialNumber: XH023891
> > [ 103.852744] usb 1-1.4.4: usbfs: process 4360 (ThreadWeaver::T) did not
claim interface 0 before use
> > [ 103.930343] usb 1-1.4.4: reset high-speed USB device number 4 using
xhci_hcd
> > [ 104.021437] usb 1-1.4.4: usbfs: process 4360 (ThreadWeaver::T) did not
claim interface 0 before use
> > [ 104.098365] usb 1-1.4.4: reset high-speed USB device number 4 using
xhci_hcd
>
> [lots of resets and warnings cut out]
>
> Well, this answers one question: The program not claiming interface 0
> is ThreadWeaver::T, whatever that is. This isn't really an error, but
> it is sloppy programming. You could report it to the maintainers of
> that program.
>
> The log shows a more or less constant series of warnings and resets as
> long as the Android device is plugged in. This would explain any
> unresponsiveness, although it doesn't explain eventual crashes.
>
> If you know what that ThreadWeaver program is, and if you don't need
> it, you could try disabling or removing it to see if the situation
> improves.
I'm not sure what program that comes from either, I'll look it up.
Something to note is that things work fine if suspend is disabled or using the
regular usb 2 ports on my motherboard instead of the usb 3 ports.
I also saw different error messages, much more severe ones that caused the
xhci host to lock up completely and it didn't seem to need me to plug phones
in to cause it. I'll follow up after i get it to happen again.
> Alan Stern
>
>
--
Thomas Fjellstrom
thomas@fjellstrom.ca
^ permalink raw reply [flat|nested] 12+ messages in thread
* RE: Asmedia USB 1343 crashes
2017-05-01 13:40 Asmedia USB 1343 crashes Thomas Fjellstrom
2017-05-01 14:54 ` Alan Stern
@ 2017-05-02 15:43 ` David Laight
1 sibling, 0 replies; 12+ messages in thread
From: David Laight @ 2017-05-02 15:43 UTC (permalink / raw)
To: 'Thomas Fjellstrom', linux-usb; +Cc: LKML
From: Thomas Fjellstrom
> Sent: 01 May 2017 14:40
> I've got a 970 Pro gaming aura motherboard with an Asmedia 1343 Usb 3.1
> controller. It's been consistently throwing errors and eventually crashing and
> becomming unresponsive.
...
I've an earlier Asmedia 1042 controller.
It has a bug (which I don't remember seeing a fix for) that it will
only process one entry from the command ring each time the doorbell
is rung.
If more than one command gets queued then it all got very confusing
because responses to timed out commands kept being seen.
(I no longer have the USB3 ethernet device needed to reproduce this.)
The later part might have the same bug.
David
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Asmedia USB 1343 crashes
2017-05-01 18:08 ` Thomas Fjellstrom
@ 2017-05-03 2:04 ` Thomas Fjellstrom
2017-05-03 2:14 ` Thomas Fjellstrom
2017-05-03 17:54 ` Alan Stern
0 siblings, 2 replies; 12+ messages in thread
From: Thomas Fjellstrom @ 2017-05-03 2:04 UTC (permalink / raw)
To: Alan Stern; +Cc: linux-usb, LKML
On Monday, May 1, 2017 12:08:55 PM MDT Thomas Fjellstrom wrote:
> On Monday, May 1, 2017 1:57:53 PM MDT Alan Stern wrote:
> > On Mon, 1 May 2017, Thomas Fjellstrom wrote:
> > > On Monday, May 1, 2017 10:54:12 AM MDT Alan Stern wrote:
> > > > On Mon, 1 May 2017, Thomas Fjellstrom wrote:
> > > > > I've got a 970 Pro gaming aura motherboard with an Asmedia 1343 Usb
>
[snip]
>
> > [lots of resets and warnings cut out]
> >
> > Well, this answers one question: The program not claiming interface 0
> > is ThreadWeaver::T, whatever that is. This isn't really an error, but
> > it is sloppy programming. You could report it to the maintainers of
> > that program.
> >
> > The log shows a more or less constant series of warnings and resets as
> > long as the Android device is plugged in. This would explain any
> > unresponsiveness, although it doesn't explain eventual crashes.
> >
> > If you know what that ThreadWeaver program is, and if you don't need
> > it, you could try disabling or removing it to see if the situation
> > improves.
>
> I'm not sure what program that comes from either, I'll look it up.
>
> Something to note is that things work fine if suspend is disabled or using
> the regular usb 2 ports on my motherboard instead of the usb 3 ports.
>
> I also saw different error messages, much more severe ones that caused the
> xhci host to lock up completely and it didn't seem to need me to plug phones
> in to cause it. I'll follow up after i get it to happen again.
I just had a brief lockup, desktop stopped responding, other usb devices not
on the usb3 controller. Two android devices were in the process of restarting.
It doesn't seem to matter what android devices it is.
[294503.849350] ------------[ cut here ]------------
[294503.849362] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:316 dev_watchdog+0x223/0x230
[294503.849365] NETDEV WATCHDOG: enp4s0 (igb): transmit queue 0 timed out
[294503.849367] Modules linked in: sr_mod cdrom ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 xt_addrtype xt_conntrack nf_nat nf_conntrack br_netfilter overlay ebtable_filter ebtables ip6table_filter ip6_tables nfsv3 nfs_acl nfs lockd grace iptable_filter bridge stp llc amdgpu mfd_core fuse vfat fat eeepc_wmi asus_wmi rfkill edac_mce_amd edac_core pcspkr sg amdkfd radeon ttm sunrpc k10temp it87 hwmon_vid fam15h_power efivarfs ip_tables ipv6 autofs4 crc32c_intel i2c_piix4
[294503.849407] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc7 #8
[294503.849410] Hardware name: To be filled by O.E.M. To be filled by O.E.M./970 PRO GAMING/AURA, BIOS 0901 11/07/2016
[294503.849413] Call Trace:
[294503.849417] <IRQ>
[294503.849422] dump_stack+0x4d/0x63
[294503.849426] __warn+0xc6/0xe0
[294503.849430] warn_slowpath_fmt+0x46/0x50
[294503.849434] dev_watchdog+0x223/0x230
[294503.849438] ? qdisc_rcu_free+0x40/0x40
[294503.849442] call_timer_fn+0x30/0x160
[294503.849445] ? qdisc_rcu_free+0x40/0x40
[294503.849448] run_timer_softirq+0x1e1/0x440
[294503.849453] ? lapic_next_event+0x18/0x20
[294503.849456] ? sched_clock_cpu+0x11/0xd0
[294503.849459] __do_softirq+0x101/0x2f0
[294503.849463] irq_exit+0xb9/0xc0
[294503.849466] smp_apic_timer_interrupt+0x38/0x50
[294503.849470] apic_timer_interrupt+0x86/0x90
[294503.849474] RIP: 0010:acpi_idle_do_entry+0x2c/0x40
[294503.849476] RSP: 0018:ffffffffb2a03d90 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
[294503.849480] RAX: 0000000000000000 RBX: ffff884d1a966c00 RCX: 0000000000000034
[294503.849483] RDX: 4ec4ec4ec4ec4ec5 RSI: 0000000000000001 RDI: ffff884d1a966c64
[294503.849485] RBP: ffffffffb2a03dd0 R08: 00000000000003e3 R09: 0000000000000018
[294503.849487] R10: 00000000000003c1 R11: 00000000000003d4 R12: ffff884d1a966c64
[294503.849490] R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000001
[294503.849492] </IRQ>
[294503.849497] ? acpi_idle_enter+0xd7/0x290
[294503.849502] cpuidle_enter_state+0xed/0x2e0
[294503.849506] cpuidle_enter+0x12/0x20
[294503.849509] call_cpuidle+0x1e/0x30
[294503.849512] do_idle+0x179/0x1d0
[294503.849515] cpu_startup_entry+0x5d/0x60
[294503.849518] rest_init+0x7f/0x90
[294503.849522] start_kernel+0x405/0x412
[294503.849525] x86_64_start_reservations+0x24/0x26
[294503.849528] x86_64_start_kernel+0x182/0x193
[294503.849531] start_cpu+0x14/0x14
[294503.849534] ? start_cpu+0x14/0x14
[294503.849537] ---[ end trace 12db587e781d6e4f ]---
[294503.849558] igb 0000:04:00.0 enp4s0: Reset adapter
[294504.576629] xhci_hcd 0000:02:00.0: Stop command ring failed, maybe the host is dead
[294504.576656] xhci_hcd 0000:02:00.0: Abort command ring failed
[294504.576799] xhci_hcd 0000:02:00.0: xHCI host not responding to stop endpoint command.
[294504.576805] xhci_hcd 0000:02:00.0: Assuming host is dying, halting host.
[294504.576817] br0: port 1(enp4s0) entered disabled state
[294504.576858] xhci_hcd 0000:02:00.0: HC died; cleaning up
[294504.576909] xhci_hcd 0000:02:00.0: Timeout while waiting for setup device command
[294504.576975] igb 0000:04:00.0 enp4s0: igb: enp4s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[294504.577144] xhci_hcd 0000:02:00.0: HC died; cleaning up
[294504.577158] usb 8-1: USB disconnect, device number 2
[294504.577164] usb 8-1.3: USB disconnect, device number 8
[294504.577225] br0: port 1(enp4s0) entered blocking state
[294504.577230] br0: port 1(enp4s0) entered forwarding state
[294504.580048] usb 9-1: USB disconnect, device number 2
[294504.580058] usb 9-1.4: USB disconnect, device number 3
[294504.580063] usb 9-1.4.3: USB disconnect, device number 4
[294504.588587] usb 8-1.4: USB disconnect, device number 3
[294504.617124] igb 0000:04:00.0 enp4s0: igb: enp4s0 NIC Link is Down
[294504.856569] br0: port 1(enp4s0) entered disabled state
[294504.992429] usb 8-1.4.2: device not accepting address 16, error -108
[294504.992464] usb 8-1.4-port2: couldn't allocate usb_device
[294504.992478] usb 8-1.4.1: USB disconnect, device number 6
[294505.013765] usb 8-1.4.4: USB disconnect, device number 15
[294508.254985] igb 0000:04:00.0 enp4s0: igb: enp4s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[294508.360695] br0: port 1(enp4s0) entered blocking state
[294508.360701] br0: port 1(enp4s0) entered forwarding state
> > Alan Stern
--
Thomas Fjellstrom
thomas@fjellstrom.ca
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Asmedia USB 1343 crashes
2017-05-03 2:04 ` Thomas Fjellstrom
@ 2017-05-03 2:14 ` Thomas Fjellstrom
2017-05-03 17:54 ` Alan Stern
1 sibling, 0 replies; 12+ messages in thread
From: Thomas Fjellstrom @ 2017-05-03 2:14 UTC (permalink / raw)
To: Alan Stern; +Cc: linux-usb, LKML
On Tuesday, May 2, 2017 8:04:28 PM MDT Thomas Fjellstrom wrote:
> On Monday, May 1, 2017 12:08:55 PM MDT Thomas Fjellstrom wrote:
> > On Monday, May 1, 2017 1:57:53 PM MDT Alan Stern wrote:
> > > On Mon, 1 May 2017, Thomas Fjellstrom wrote:
> > > > On Monday, May 1, 2017 10:54:12 AM MDT Alan Stern wrote:
> > > > > On Mon, 1 May 2017, Thomas Fjellstrom wrote:
> > > > > > I've got a 970 Pro gaming aura motherboard with an Asmedia 1343 Usb
> >
> [snip]
> >
> > > [lots of resets and warnings cut out]
> > >
> > > Well, this answers one question: The program not claiming interface 0
> > > is ThreadWeaver::T, whatever that is. This isn't really an error, but
> > > it is sloppy programming. You could report it to the maintainers of
> > > that program.
> > >
> > > The log shows a more or less constant series of warnings and resets as
> > > long as the Android device is plugged in. This would explain any
> > > unresponsiveness, although it doesn't explain eventual crashes.
> > >
> > > If you know what that ThreadWeaver program is, and if you don't need
> > > it, you could try disabling or removing it to see if the situation
> > > improves.
> >
> > I'm not sure what program that comes from either, I'll look it up.
> >
> > Something to note is that things work fine if suspend is disabled or using
> > the regular usb 2 ports on my motherboard instead of the usb 3 ports.
> >
> > I also saw different error messages, much more severe ones that caused the
> > xhci host to lock up completely and it didn't seem to need me to plug phones
> > in to cause it. I'll follow up after i get it to happen again.
>
> I just had a brief lockup, desktop stopped responding, other usb devices not
> on the usb3 controller. Two android devices were in the process of restarting.
>
> It doesn't seem to matter what android devices it is.
>
[snip log]
The usb 3.1 controller seems to be inaccessible.
It'll probably need a reboot to get working again.
>
> > > Alan Stern
>
>
>
--
Thomas Fjellstrom
thomas@fjellstrom.ca
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Asmedia USB 1343 crashes
2017-05-03 2:04 ` Thomas Fjellstrom
2017-05-03 2:14 ` Thomas Fjellstrom
@ 2017-05-03 17:54 ` Alan Stern
2017-05-03 19:20 ` Thomas Fjellstrom
1 sibling, 1 reply; 12+ messages in thread
From: Alan Stern @ 2017-05-03 17:54 UTC (permalink / raw)
To: Thomas Fjellstrom, Mathias Nyman; +Cc: USB list, LKML
On Tue, 2 May 2017, Thomas Fjellstrom wrote:
> I just had a brief lockup, desktop stopped responding, other usb devices not
> on the usb3 controller. Two android devices were in the process of restarting.
>
> It doesn't seem to matter what android devices it is.
>
> [294503.849350] ------------[ cut here ]------------
> [294503.849362] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:316 dev_watchdog+0x223/0x230
> [294503.849365] NETDEV WATCHDOG: enp4s0 (igb): transmit queue 0 timed out
> [294503.849367] Modules linked in: sr_mod cdrom ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 xt_addrtype xt_conntrack nf_nat nf_conntrack br_netfilter overlay ebtable_filter ebtables ip6table_filter ip6_tables nfsv3 nfs_acl nfs lockd grace iptable_filter bridge stp llc amdgpu mfd_core fuse vfat fat eeepc_wmi asus_wmi rfkill edac_mce_amd edac_core pcspkr sg amdkfd radeon ttm sunrpc k10temp it87 hwmon_vid fam15h_power efivarfs ip_tables ipv6 autofs4 crc32c_intel i2c_piix4
> [294503.849407] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc7 #8
> [294503.849410] Hardware name: To be filled by O.E.M. To be filled by O.E.M./970 PRO GAMING/AURA, BIOS 0901 11/07/2016
> [294503.849413] Call Trace:
> [294503.849417] <IRQ>
> [294503.849422] dump_stack+0x4d/0x63
> [294503.849426] __warn+0xc6/0xe0
> [294503.849430] warn_slowpath_fmt+0x46/0x50
> [294503.849434] dev_watchdog+0x223/0x230
> [294503.849438] ? qdisc_rcu_free+0x40/0x40
> [294503.849442] call_timer_fn+0x30/0x160
> [294503.849445] ? qdisc_rcu_free+0x40/0x40
> [294503.849448] run_timer_softirq+0x1e1/0x440
> [294503.849453] ? lapic_next_event+0x18/0x20
> [294503.849456] ? sched_clock_cpu+0x11/0xd0
> [294503.849459] __do_softirq+0x101/0x2f0
> [294503.849463] irq_exit+0xb9/0xc0
> [294503.849466] smp_apic_timer_interrupt+0x38/0x50
> [294503.849470] apic_timer_interrupt+0x86/0x90
> [294503.849474] RIP: 0010:acpi_idle_do_entry+0x2c/0x40
> [294503.849476] RSP: 0018:ffffffffb2a03d90 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
> [294503.849480] RAX: 0000000000000000 RBX: ffff884d1a966c00 RCX: 0000000000000034
> [294503.849483] RDX: 4ec4ec4ec4ec4ec5 RSI: 0000000000000001 RDI: ffff884d1a966c64
> [294503.849485] RBP: ffffffffb2a03dd0 R08: 00000000000003e3 R09: 0000000000000018
> [294503.849487] R10: 00000000000003c1 R11: 00000000000003d4 R12: ffff884d1a966c64
> [294503.849490] R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000001
> [294503.849492] </IRQ>
> [294503.849497] ? acpi_idle_enter+0xd7/0x290
> [294503.849502] cpuidle_enter_state+0xed/0x2e0
> [294503.849506] cpuidle_enter+0x12/0x20
> [294503.849509] call_cpuidle+0x1e/0x30
> [294503.849512] do_idle+0x179/0x1d0
> [294503.849515] cpu_startup_entry+0x5d/0x60
> [294503.849518] rest_init+0x7f/0x90
> [294503.849522] start_kernel+0x405/0x412
> [294503.849525] x86_64_start_reservations+0x24/0x26
> [294503.849528] x86_64_start_kernel+0x182/0x193
> [294503.849531] start_cpu+0x14/0x14
> [294503.849534] ? start_cpu+0x14/0x14
> [294503.849537] ---[ end trace 12db587e781d6e4f ]---
> [294503.849558] igb 0000:04:00.0 enp4s0: Reset adapter
> [294504.576629] xhci_hcd 0000:02:00.0: Stop command ring failed, maybe the host is dead
> [294504.576656] xhci_hcd 0000:02:00.0: Abort command ring failed
> [294504.576799] xhci_hcd 0000:02:00.0: xHCI host not responding to stop endpoint command.
> [294504.576805] xhci_hcd 0000:02:00.0: Assuming host is dying, halting host.
At this point you have reached the limit of my knowledge. The best
person to help is Mathias Nyman, the xHCI maintainer (CC'ed).
Is that WARNING at the start of the log connected with the later
events?
Alan Stern
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Asmedia USB 1343 crashes
2017-05-03 17:54 ` Alan Stern
@ 2017-05-03 19:20 ` Thomas Fjellstrom
2017-05-04 15:02 ` Mathias Nyman
0 siblings, 1 reply; 12+ messages in thread
From: Thomas Fjellstrom @ 2017-05-03 19:20 UTC (permalink / raw)
To: Alan Stern; +Cc: Mathias Nyman, USB list, LKML
On Wednesday, May 3, 2017 1:54:39 PM MDT Alan Stern wrote:
> On Tue, 2 May 2017, Thomas Fjellstrom wrote:
>
> > I just had a brief lockup, desktop stopped responding, other usb devices not
> > on the usb3 controller. Two android devices were in the process of restarting.
> >
> > It doesn't seem to matter what android devices it is.
> >
> > [294503.849350] ------------[ cut here ]------------
> > [294503.849362] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:316 dev_watchdog+0x223/0x230
> > [294503.849365] NETDEV WATCHDOG: enp4s0 (igb): transmit queue 0 timed out
> > [294503.849367] Modules linked in: sr_mod cdrom ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 xt_addrtype xt_conntrack nf_nat nf_conntrack br_netfilter overlay ebtable_filter ebtables ip6table_filter ip6_tables nfsv3 nfs_acl nfs lockd grace iptable_filter bridge stp llc amdgpu mfd_core fuse vfat fat eeepc_wmi asus_wmi rfkill edac_mce_amd edac_core pcspkr sg amdkfd radeon ttm sunrpc k10temp it87 hwmon_vid fam15h_power efivarfs ip_tables ipv6 autofs4 crc32c_intel i2c_piix4
> > [294503.849407] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc7 #8
> > [294503.849410] Hardware name: To be filled by O.E.M. To be filled by O.E.M./970 PRO GAMING/AURA, BIOS 0901 11/07/2016
> > [294503.849413] Call Trace:
> > [294503.849417] <IRQ>
> > [294503.849422] dump_stack+0x4d/0x63
> > [294503.849426] __warn+0xc6/0xe0
> > [294503.849430] warn_slowpath_fmt+0x46/0x50
> > [294503.849434] dev_watchdog+0x223/0x230
> > [294503.849438] ? qdisc_rcu_free+0x40/0x40
> > [294503.849442] call_timer_fn+0x30/0x160
> > [294503.849445] ? qdisc_rcu_free+0x40/0x40
> > [294503.849448] run_timer_softirq+0x1e1/0x440
> > [294503.849453] ? lapic_next_event+0x18/0x20
> > [294503.849456] ? sched_clock_cpu+0x11/0xd0
> > [294503.849459] __do_softirq+0x101/0x2f0
> > [294503.849463] irq_exit+0xb9/0xc0
> > [294503.849466] smp_apic_timer_interrupt+0x38/0x50
> > [294503.849470] apic_timer_interrupt+0x86/0x90
> > [294503.849474] RIP: 0010:acpi_idle_do_entry+0x2c/0x40
> > [294503.849476] RSP: 0018:ffffffffb2a03d90 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
> > [294503.849480] RAX: 0000000000000000 RBX: ffff884d1a966c00 RCX: 0000000000000034
> > [294503.849483] RDX: 4ec4ec4ec4ec4ec5 RSI: 0000000000000001 RDI: ffff884d1a966c64
> > [294503.849485] RBP: ffffffffb2a03dd0 R08: 00000000000003e3 R09: 0000000000000018
> > [294503.849487] R10: 00000000000003c1 R11: 00000000000003d4 R12: ffff884d1a966c64
> > [294503.849490] R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000001
> > [294503.849492] </IRQ>
> > [294503.849497] ? acpi_idle_enter+0xd7/0x290
> > [294503.849502] cpuidle_enter_state+0xed/0x2e0
> > [294503.849506] cpuidle_enter+0x12/0x20
> > [294503.849509] call_cpuidle+0x1e/0x30
> > [294503.849512] do_idle+0x179/0x1d0
> > [294503.849515] cpu_startup_entry+0x5d/0x60
> > [294503.849518] rest_init+0x7f/0x90
> > [294503.849522] start_kernel+0x405/0x412
> > [294503.849525] x86_64_start_reservations+0x24/0x26
> > [294503.849528] x86_64_start_kernel+0x182/0x193
> > [294503.849531] start_cpu+0x14/0x14
> > [294503.849534] ? start_cpu+0x14/0x14
> > [294503.849537] ---[ end trace 12db587e781d6e4f ]---
> > [294503.849558] igb 0000:04:00.0 enp4s0: Reset adapter
> > [294504.576629] xhci_hcd 0000:02:00.0: Stop command ring failed, maybe the host is dead
> > [294504.576656] xhci_hcd 0000:02:00.0: Abort command ring failed
> > [294504.576799] xhci_hcd 0000:02:00.0: xHCI host not responding to stop endpoint command.
> > [294504.576805] xhci_hcd 0000:02:00.0: Assuming host is dying, halting host.
>
> At this point you have reached the limit of my knowledge. The best
> person to help is Mathias Nyman, the xHCI maintainer (CC'ed).
>
> Is that WARNING at the start of the log connected with the later
> events?
I belive so yes. Except for some usb adds/removals for the devices restarting.
> Alan Stern
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Thomas Fjellstrom
thomas@fjellstrom.ca
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Asmedia USB 1343 crashes
2017-05-03 19:20 ` Thomas Fjellstrom
@ 2017-05-04 15:02 ` Mathias Nyman
2017-05-04 15:17 ` Thomas Fjellstrom
0 siblings, 1 reply; 12+ messages in thread
From: Mathias Nyman @ 2017-05-04 15:02 UTC (permalink / raw)
To: Thomas Fjellstrom, Alan Stern; +Cc: Mathias Nyman, USB list, LKML
On 03.05.2017 22:20, Thomas Fjellstrom wrote:
> On Wednesday, May 3, 2017 1:54:39 PM MDT Alan Stern wrote:
>> On Tue, 2 May 2017, Thomas Fjellstrom wrote:
>>
>>> I just had a brief lockup, desktop stopped responding, other usb devices not
>>> on the usb3 controller. Two android devices were in the process of restarting
>>>
>>> It doesn't seem to matter what android devices it is.
>>>
>>> [294503.849350] ------------[ cut here ]------------
>>> [294503.849362] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:316 dev_watchdog+0x223/0x230
>>> [294503.849365] NETDEV WATCHDOG: enp4s0 (igb): transmit queue 0 timed out
>>> [294503.849367] Modules linked in: sr_mod cdrom ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 xt_addrtype xt_conntrack nf_nat nf_conntrack br_netfilter overlay ebtable_filter ebtables ip6table_filter ip6_tables nfsv3 nfs_acl nfs lockd grace iptable_filter bridge stp llc amdgpu mfd_core fuse vfat fat eeepc_wmi asus_wmi rfkill edac_mce_amd edac_core pcspkr sg amdkfd radeon ttm sunrpc k10temp it87 hwmon_vid fam15h_power efivarfs ip_tables ipv6 autofs4 crc32c_intel i2c_piix4
>>> [294503.849407] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc7 #8
>>> [294503.849410] Hardware name: To be filled by O.E.M. To be filled by O.E.M./970 PRO GAMING/AURA, BIOS 0901 11/07/2016
>>> [294503.849413] Call Trace:
>>> [294503.849417] <IRQ>
>>> [294503.849422] dump_stack+0x4d/0x63
>>> [294503.849426] __warn+0xc6/0xe0
>>> [294503.849430] warn_slowpath_fmt+0x46/0x50
>>> [294503.849434] dev_watchdog+0x223/0x230
>>> [294503.849438] ? qdisc_rcu_free+0x40/0x40
>>> [294503.849442] call_timer_fn+0x30/0x160
>>> [294503.849445] ? qdisc_rcu_free+0x40/0x40
>>> [294503.849448] run_timer_softirq+0x1e1/0x440
>>> [294503.849453] ? lapic_next_event+0x18/0x20
>>> [294503.849456] ? sched_clock_cpu+0x11/0xd0
>>> [294503.849459] __do_softirq+0x101/0x2f0
>>> [294503.849463] irq_exit+0xb9/0xc0
>>> [294503.849466] smp_apic_timer_interrupt+0x38/0x50
>>> [294503.849470] apic_timer_interrupt+0x86/0x90
>>> [294503.849474] RIP: 0010:acpi_idle_do_entry+0x2c/0x40
>>> [294503.849476] RSP: 0018:ffffffffb2a03d90 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
>>> [294503.849480] RAX: 0000000000000000 RBX: ffff884d1a966c00 RCX: 0000000000000034
>>> [294503.849483] RDX: 4ec4ec4ec4ec4ec5 RSI: 0000000000000001 RDI: ffff884d1a966c64
>>> [294503.849485] RBP: ffffffffb2a03dd0 R08: 00000000000003e3 R09: 0000000000000018
>>> [294503.849487] R10: 00000000000003c1 R11: 00000000000003d4 R12: ffff884d1a966c64
>>> [294503.849490] R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000001
>>> [294503.849492] </IRQ>
>>> [294503.849497] ? acpi_idle_enter+0xd7/0x290
>>> [294503.849502] cpuidle_enter_state+0xed/0x2e0
>>> [294503.849506] cpuidle_enter+0x12/0x20
>>> [294503.849509] call_cpuidle+0x1e/0x30
>>> [294503.849512] do_idle+0x179/0x1d0
>>> [294503.849515] cpu_startup_entry+0x5d/0x60
>>> [294503.849518] rest_init+0x7f/0x90
>>> [294503.849522] start_kernel+0x405/0x412
>>> [294503.849525] x86_64_start_reservations+0x24/0x26
>>> [294503.849528] x86_64_start_kernel+0x182/0x193
>>> [294503.849531] start_cpu+0x14/0x14
>>> [294503.849534] ? start_cpu+0x14/0x14
>>> [294503.849537] ---[ end trace 12db587e781d6e4f ]---
>>> [294503.849558] igb 0000:04:00.0 enp4s0: Reset adapter
>>> [294504.576629] xhci_hcd 0000:02:00.0: Stop command ring failed, maybe the host is dead
>>> [294504.576656] xhci_hcd 0000:02:00.0: Abort command ring failed
>>> [294504.576799] xhci_hcd 0000:02:00.0: xHCI host not responding to stop endpoint command.
>>> [294504.576805] xhci_hcd 0000:02:00.0: Assuming host is dying, halting host.
>>
>> At this point you have reached the limit of my knowledge. The best
>> person to help is Mathias Nyman, the xHCI maintainer (CC'ed).
>>
For some reason stopping the command ring fails, ring is stopped by writing a
bit in a register, hardware is supposed to clear another bit in the same register
when ring is stopped. We poll for the second bit immediately after writing the first.
If second bit is not cleare after 5 seconds we bail out.
It could be that hardware never clears the bit.
You said you had two android phones connected, and both were restarting.
It could be a race in the command ring stopping code.
Can you reproduce this xhci with only one android device connected?
-Mathias
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Asmedia USB 1343 crashes
2017-05-04 15:02 ` Mathias Nyman
@ 2017-05-04 15:17 ` Thomas Fjellstrom
0 siblings, 0 replies; 12+ messages in thread
From: Thomas Fjellstrom @ 2017-05-04 15:17 UTC (permalink / raw)
To: Mathias Nyman; +Cc: Alan Stern, Mathias Nyman, USB list, LKML
On Thursday, May 4, 2017 6:02:53 PM MDT Mathias Nyman wrote:
> On 03.05.2017 22:20, Thomas Fjellstrom wrote:
> > On Wednesday, May 3, 2017 1:54:39 PM MDT Alan Stern wrote:
> >> On Tue, 2 May 2017, Thomas Fjellstrom wrote:
> >>
> >>> I just had a brief lockup, desktop stopped responding, other usb devices
not
> >>> on the usb3 controller. Two android devices were in the process of
restarting
> >>>
> >>> It doesn't seem to matter what android devices it is.
> >>>
> >>> [294503.849350] ------------[ cut here ]------------
> >>> [294503.849362] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:316
dev_watchdog+0x223/0x230
> >>> [294503.849365] NETDEV WATCHDOG: enp4s0 (igb): transmit queue 0 timed
out
> >>> [294503.849367] Modules linked in: sr_mod cdrom ipt_MASQUERADE
nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4
nf_nat_ipv4 xt_addrtype xt_conntrack nf_nat nf_conntrack br_netfilter overlay
ebtable_filter ebtables ip6table_filter ip6_tables nfsv3 nfs_acl nfs lockd grace
iptable_filter bridge stp llc amdgpu mfd_core fuse vfat fat eeepc_wmi asus_wmi
rfkill edac_mce_amd edac_core pcspkr sg amdkfd radeon ttm sunrpc k10temp it87
hwmon_vid fam15h_power efivarfs ip_tables ipv6 autofs4 crc32c_intel i2c_piix4
> >>> [294503.849407] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.11.0-rc7 #8
> >>> [294503.849410] Hardware name: To be filled by O.E.M. To be filled by
O.E.M./970 PRO GAMING/AURA, BIOS 0901 11/07/2016
> >>> [294503.849413] Call Trace:
> >>> [294503.849417] <IRQ>
> >>> [294503.849422] dump_stack+0x4d/0x63
> >>> [294503.849426] __warn+0xc6/0xe0
> >>> [294503.849430] warn_slowpath_fmt+0x46/0x50
> >>> [294503.849434] dev_watchdog+0x223/0x230
> >>> [294503.849438] ? qdisc_rcu_free+0x40/0x40
> >>> [294503.849442] call_timer_fn+0x30/0x160
> >>> [294503.849445] ? qdisc_rcu_free+0x40/0x40
> >>> [294503.849448] run_timer_softirq+0x1e1/0x440
> >>> [294503.849453] ? lapic_next_event+0x18/0x20
> >>> [294503.849456] ? sched_clock_cpu+0x11/0xd0
> >>> [294503.849459] __do_softirq+0x101/0x2f0
> >>> [294503.849463] irq_exit+0xb9/0xc0
> >>> [294503.849466] smp_apic_timer_interrupt+0x38/0x50
> >>> [294503.849470] apic_timer_interrupt+0x86/0x90
> >>> [294503.849474] RIP: 0010:acpi_idle_do_entry+0x2c/0x40
> >>> [294503.849476] RSP: 0018:ffffffffb2a03d90 EFLAGS: 00000246 ORIG_RAX:
ffffffffffffff10
> >>> [294503.849480] RAX: 0000000000000000 RBX: ffff884d1a966c00 RCX:
0000000000000034
> >>> [294503.849483] RDX: 4ec4ec4ec4ec4ec5 RSI: 0000000000000001 RDI:
ffff884d1a966c64
> >>> [294503.849485] RBP: ffffffffb2a03dd0 R08: 00000000000003e3 R09:
0000000000000018
> >>> [294503.849487] R10: 00000000000003c1 R11: 00000000000003d4 R12:
ffff884d1a966c64
> >>> [294503.849490] R13: 0000000000000001 R14: 0000000000000001 R15:
0000000000000001
> >>> [294503.849492] </IRQ>
> >>> [294503.849497] ? acpi_idle_enter+0xd7/0x290
> >>> [294503.849502] cpuidle_enter_state+0xed/0x2e0
> >>> [294503.849506] cpuidle_enter+0x12/0x20
> >>> [294503.849509] call_cpuidle+0x1e/0x30
> >>> [294503.849512] do_idle+0x179/0x1d0
> >>> [294503.849515] cpu_startup_entry+0x5d/0x60
> >>> [294503.849518] rest_init+0x7f/0x90
> >>> [294503.849522] start_kernel+0x405/0x412
> >>> [294503.849525] x86_64_start_reservations+0x24/0x26
> >>> [294503.849528] x86_64_start_kernel+0x182/0x193
> >>> [294503.849531] start_cpu+0x14/0x14
> >>> [294503.849534] ? start_cpu+0x14/0x14
> >>> [294503.849537] ---[ end trace 12db587e781d6e4f ]---
> >>> [294503.849558] igb 0000:04:00.0 enp4s0: Reset adapter
> >>> [294504.576629] xhci_hcd 0000:02:00.0: Stop command ring failed, maybe
the host is dead
> >>> [294504.576656] xhci_hcd 0000:02:00.0: Abort command ring failed
> >>> [294504.576799] xhci_hcd 0000:02:00.0: xHCI host not responding to stop
endpoint command.
> >>> [294504.576805] xhci_hcd 0000:02:00.0: Assuming host is dying, halting
host.
> >>
> >> At this point you have reached the limit of my knowledge. The best
> >> person to help is Mathias Nyman, the xHCI maintainer (CC'ed).
> >>
>
> For some reason stopping the command ring fails, ring is stopped by writing
a
> bit in a register, hardware is supposed to clear another bit in the same
register
> when ring is stopped. We poll for the second bit immediately after writing
the first.
> If second bit is not cleare after 5 seconds we bail out.
>
> It could be that hardware never clears the bit.
>
> You said you had two android phones connected, and both were restarting.
> It could be a race in the command ring stopping code.
>
> Can you reproduce this xhci with only one android device connected?
I'll try my best. I have had issues with this controller with just devices
connected and no restarting, so I can't guarantee if I can reproduce the same
exact issue right away.
> -Mathias
>
>
--
Thomas Fjellstrom
thomas@fjellstrom.ca
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2017-05-04 15:18 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-05-01 13:40 Asmedia USB 1343 crashes Thomas Fjellstrom
2017-05-01 14:54 ` Alan Stern
2017-05-01 16:20 ` Thomas Fjellstrom
2017-05-01 17:57 ` Alan Stern
2017-05-01 18:08 ` Thomas Fjellstrom
2017-05-03 2:04 ` Thomas Fjellstrom
2017-05-03 2:14 ` Thomas Fjellstrom
2017-05-03 17:54 ` Alan Stern
2017-05-03 19:20 ` Thomas Fjellstrom
2017-05-04 15:02 ` Mathias Nyman
2017-05-04 15:17 ` Thomas Fjellstrom
2017-05-02 15:43 ` David Laight
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).