Re: [PATCH 9/9] staging: iio: tsl2583: remove redundant write to the control register in taos_probe()

[Jonathan Cameron <jic23@kernel.org>]

On 03/11/16 12:56, Brian Masney wrote:
> taos_probe() calls i2c_smbus_write_byte() to select the control
> register, however there is no subsequent calls to i2c_smbus_read_byte().
> The write call is unnecessary and is removed by this patch.
> 
> Verified that the driver still functions correctly using a TSL2581
> hooked up to a Raspberry Pi 2.
> 
> Signed-off-by: Brian Masney <masneyb@onstation.org>
Again, looks fine - will pickup when precursors are sorted.

Another generally nice series Brian.

Thanks!

Jonathan
> ---
>  drivers/staging/iio/light/tsl2583.c | 8 --------
>  1 file changed, 8 deletions(-)
> 
> diff --git a/drivers/staging/iio/light/tsl2583.c b/drivers/staging/iio/light/tsl2583.c
> index 8c8361d..e80c027 100644
> --- a/drivers/staging/iio/light/tsl2583.c
> +++ b/drivers/staging/iio/light/tsl2583.c
> @@ -781,14 +781,6 @@ static int taos_probe(struct i2c_client *clientp,
>  		return -EINVAL;
>  	}
>  
> -	ret = i2c_smbus_write_byte(clientp, (TSL258X_CMD_REG | TSL258X_CNTRL));
> -	if (ret < 0) {
> -		dev_err(&clientp->dev,
> -			"i2c_smbus_write_byte() to cmd reg failed in taos_probe(), err = %d\n",
> -			ret);
> -		return ret;
> -	}
> -
>  	indio_dev->info = &tsl2583_info;
>  	indio_dev->channels = tsl2583_channels;
>  	indio_dev->num_channels = ARRAY_SIZE(tsl2583_channels);
>